rendered paste body
## Lance's ooober conf...man i have no life
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/local/"
# FontPath "/usr/share/fonts/Speedo/"
# FontPath "/usr/share/fonts/TrueType/"
# FontPath "/usr/share/fonts/freefont/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor 1280-1024"
HorizSync 31.5 - 79.0
VertRefresh 50.0 - 90.0
Option "dpms"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor 1280-1024"
HorizSync 31.5 - 79.0
VertRefresh 50.0 - 90.0
Option "dpms"
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "Monitor Vendor"
ModelName "Monitor 1280-1024"
HorizSync 31.5 - 79.0
VertRefresh 50.0 - 90.0
Option "dpms"
EndSection
Section "Monitor"
Identifier "gamingmon"
VendorName "Monitor Vendor"
ModelName "Monitor 1280-1024"
HorizSync 31.5 - 79.0
VertRefresh 50.0 - 90.0
Option "dpms"
EndSection
Section "Monitor"
Identifier "TV0"
VendorName "TV Vendor"
ModelName "TV Generic"
HorizSync 30.0 - 50.0
VertRefresh 60.0 - 60.0
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Card1-TS"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV11 [GeForce2 MX/MX 400]"
Option "NoLogo" "true"
Option "RenderAccel" "true"
BusID "PCI:2:06:0"
EndSection
Section "Device"
Identifier "Card0-TS"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV36 [GeForce FX 5700LE]"
Option "NoLogo" "true"
Option "RenderAccel" "true"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Device"
Identifier "Card0-1-TS"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV36 [GeForce FX 5700LE]"
Option "NoLogo" "true"
Option "RenderAccel" "true"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Card0-DS"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV36 [GeForce FX 5700LE]"
Option "NoLogo" "true"
Option "RenderAccel" "true"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Device"
Identifier "Card0-1-DS"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV36 [GeForce FX 5700LE]"
Option "NoLogo" "true"
Option "RenderAccel" "true"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Card0-SS-1024-768"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV36 [GeForce FX 5700LE]"
Option "NoLogo" "true"
Option "RenderAccel" "true"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Card0-SS-1280-1024"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV36 [GeForce FX 5700LE]"
Option "NoLogo" "true"
Option "RenderAccel" "true"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Card0-SS-1600-1200"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV36 [GeForce FX 5700LE]"
Option "NoLogo" "true"
Option "RenderAccel" "true"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Card0-TV-800-600"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV36 [GeForce FX 5700LE]"
Option "RenderAccel" "true"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Card0-TV-1024-768"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV36 [GeForce FX 5700LE]"
Option "RenderAccel" "true"
BusID "PCI:1:0:0"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "Screen0-TS"
Device "Card0-TS"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1-TS"
Device "Card1-TS"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2-TS"
Device "Card0-1-TS"
Monitor "Monitor2"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0-DS"
Device "Card0-DS"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1-DS"
Device "Card0-1-DS"
Monitor "Monitor2"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0-SS-1024-768"
Device "Card0-SS-1024-768"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0-SS-1280-1024"
Device "Card0-SS-1280-1024"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280-1024" "1280-1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0-SS-1600-1200"
Device "Card0-SS-1600-1200"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600-1200" "1600-1200"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0-TV-800-600"
Device "Card0-TV-800-600"
Monitor "TV0"
DefaultDepth 24
Option "NoLogo" "true"
Option "TwinView" "true"
Option "TVOutFormat" "COMPOSITE"
Option "TwinViewOrientation" "CLONE"
Option "MetaModes" "800x600,800x600"
Option "TVStandard" "NTSC-M"
Option "ConnectedMonitor" "CRT, TV"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "TVOverScan" "1.0"
SubSection "Display"
Depth 24
Modes "800-600" "800-600"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0-TV-1024-768"
Device "Card0-TV-1024-768"
Monitor "TV0"
DefaultDepth 24
Option "NoLogo" "true"
Option "TwinView" "true"
Option "TVOutFormat" "COMPOSITE"
Option "TwinViewOrientation" "CLONE"
Option "MetaModes" "1024-768,1024-768"
Option "TVStandard" "NTSC-M"
Option "ConnectedMonitor" "CRT, TV"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "TVOverScan" "1.0"
SubSection "Display"
Depth 24
Modes "1024-768" "1024-768"
EndSubSection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0-TS" 0 0
Screen 1 "Screen1-TS" LeftOf "Screen0-TS"
Screen 2 "Screen2-TS" RightOf "Screen0-TS"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Option "Xinerama"
EndSection
Section "ServerLayout"
Identifier "DS-1280-1024"
Screen 0 "Screen0-DS" 0 0
Screen 1 "Screen1-DS" RightOf "Screen0-DS"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Option "Xinerama"
EndSection
Section "ServerLayout"
Identifier "SS-1024-768"
Screen 0 "Screen0-SS-1024-768" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "SS-1280-1024"
Screen 0 "Screen0-SS-1280-1024" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "SS-1600-1200"
Screen 0 "Screen0-SS-1600-1200" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "TV-800-600"
Screen 0 "Screen0-TV-800-600" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "TV-1024-768"
Screen 0 "Screen0-TV-1024-768" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection