Something

Linux version 2.6.12.2 (openslug@openslug.org) (gcc version 3.4.4) #1 Mon Aug 15 23:19:04 CEST 2005
CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE)
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Machine: Linksys NSLU2
Warning: bad configuration page, trying to continue
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 8192
  DMA zone: 8192 pages, LIFO batch:3
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc reboot=s noirqdebug console=ttyS0,115200n8
PID hash table entries: 256 (order: 8, 4096 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 32MB = 32MB total
Memory: 30512KB available (1600K code, 153K data, 80K init)
Calibrating delay loop... 263.78 BogoMIPS (lpj=1318912)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
PCI: IXP4xx is host
PCI: IXP4xx Using indirect access for memory space
PCI: bus0: Fast back to back transfers disabled
dmabounce: registered device 0000:00:01.0 on pci bus
dmabounce: registered device 0000:00:01.1 on pci bus
dmabounce: registered device 0000:00:01.2 on pci bus
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
OpenN2 Misc I/O Driver Version 0.1.7
init_jiffy=-29975
setup_interrupts - jiffies=-29975 init_jiffy=-29975
enable_irq(22) unbalanced from c0010cb0
enable_irq(29) unbalanced from c0010cb8
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
IXP4xx Watchdog Timer: heartbeat 60 sec
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
io scheduler noop registered
io scheduler deadline registered
RAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksize
IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
IXP4XX-Flash.0: Found an alias at 0x800000 for the chip at 0x0
 Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
0: offset=0x0,size=0x20000,blocks=64
Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x7e0000
6 RedBoot partitions found on MTD device IXP4XX-Flash.0
Creating 6 MTD partitions on "IXP4XX-Flash.0":
0x00000000-0x00040000 : "RedBoot"
0x00040000-0x00060000 : "SysConf"
0x00060000-0x00160000 : "Kernel"
0x00160000-0x00180000 : "Ramdisk"
0x00180000-0x007e0000 : "Flashdisk"
0x007e0000-0x00800000 : "FIS directory"
PCI: enabling device 0000:00:01.2 (0140 -> 0142)
ehci_hcd 0000:00:01.2: EHCI Host Controller
ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:01.2: irq 26, io mem 0x48002000
ehci_hcd 0000:00:01.2: park 0
ehci_hcd 0000:00:01.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: enabling device 0000:00:01.0 (0140 -> 0142)
ohci_hcd 0000:00:01.0: OHCI Host Controller
ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:01.0: irq 28, io mem 0x48000000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
PCI: enabling device 0000:00:01.1 (0140 -> 0142)
ohci_hcd 0000:00:01.1: OHCI Host Controller
ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:01.1: irq 27, io mem 0x48001000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
LOADED Xicor x1205 RTC Dvr v0.9.3.3NPW
Xicor x1205 RTC Dvr v0.9.3.3NPW attached on adapter 
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
NET: Registered protocol family 1
usb 3-1: new full speed USB device using ohci_hcd and address 2
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 80K
ixp400: module license 'unspecified' taints kernel.
Module init.
ixp425_eth: 
Initializing IXP425 NPE Ethernet driver software v. 1.1A 
ixp425_eth: CPU clock speed (approx) = 0 MHz
[error] ixEthMiiPhyScan : unexpected Mii PHY ID 00008201
ixp425_eth: npe0 is using the PHY at address 0
ixp425_eth: npe1 is using the PHY at address 1
NET: Registered protocol family 17
ixp425_eth: ixEthMiiLinkStatus failed on PHY0.
        Can't determine
the auto negotiated parameters. Using default values.
nfs warning: mount version older than kernel
usbaudio: device 2 audiocontrol interface 0 has 1 input and 1 output AudioStreaming interfaces
usbaudio: valid input sample rate 48000
usbaudio: valid input sample rate 44100
usbaudio: device 2 interface 2 altsetting 1: format 0x80000010 sratelo 44100 sratehi 48000 attributes 0x01
usbaudio: valid output sample rate 48000
usbaudio: device 2 interface 1 altsetting 1: format 0x80000010 sratelo 48000 sratehi 48000 attributes 0x00
usbaudio: registered dsp 14,3
usbaudio: constructing mixer for Terminal 5 type 0x0605
usbaudio: no mixer controls found for Terminal 5
usbaudio: constructing mixer for Terminal 6 type 0x0301
usbaudio: registered mixer 14,0
usbaudio: constructing mixer for Terminal 7 type 0x0101
usbaudio: selector unit 8: ignoring channel 3
usbaudio: registered mixer 14,16
usb_audio_parsecontrol: usb_audio_state at c02568e0
usbcore: registered new driver audio
drivers/usb/class/audio.c: v1.0.0:USB Audio Class driver