rendered paste bodysmartctl 5.40 2010-03-16 r3077 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MK3265GSX
Serial Number: Y0S1D1LGB
Firmware Version: GJ002C
User Capacity: 320,072,933,376 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Mar 27 20:26:09 2012 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 80) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0007 100 100 050 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 100 100 002 Pre-fail Always - 1238
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 243
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 129
10 Spin_Retry_Count 0x0013 104 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 241
183 Runtime_Bad_Block 0x0022 100 100 001 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
185 Unknown_Attribute 0x0032 100 100 001 Old_age Always - 65535
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 12485
188 Command_Timeout 0x0032 100 098 000 Old_age Always - 16
189 High_Fly_Writes 0x003a 100 100 001 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 059 047 045 Old_age Always - 41 (Lifetime Min/Max 39/42)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 10
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 6815848
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 935
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 17
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 16624 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 16624 occurred at disk power-on lifetime: 129 hours (5 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 7f 0d 66 60
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 00 7f 0d 66 40 08 00:02:24.757 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:02:24.757 SET FEATURES [Reserved for Serial ATA]
ec 00 00 00 00 00 a0 00 00:02:24.756 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:02:24.756 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 00:02:24.756 SET FEATURES [Reserved for Serial ATA]
Error 16623 occurred at disk power-on lifetime: 129 hours (5 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 7f 0d 66 60
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 00 7f 0d 66 40 08 00:02:20.202 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:02:20.201 SET FEATURES [Reserved for Serial ATA]
ec 00 00 00 00 00 a0 00 00:02:20.201 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:02:20.201 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 00:02:20.201 SET FEATURES [Reserved for Serial ATA]
Error 16622 occurred at disk power-on lifetime: 129 hours (5 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 7f 0d 66 60
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 00 7f 0d 66 40 08 00:02:16.090 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:02:16.090 SET FEATURES [Reserved for Serial ATA]
ec 00 00 00 00 00 a0 00 00:02:16.090 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:02:16.090 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 00:02:16.090 SET FEATURES [Reserved for Serial ATA]
Error 16621 occurred at disk power-on lifetime: 129 hours (5 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 7f 0d 66 60
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 00 7f 0d 66 40 08 00:02:11.613 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:02:11.613 SET FEATURES [Reserved for Serial ATA]
ec 00 00 00 00 00 a0 00 00:02:11.612 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:02:11.612 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 00:02:11.612 SET FEATURES [Reserved for Serial ATA]
Error 16620 occurred at disk power-on lifetime: 129 hours (5 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 7f 0d 66 60
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 00 7f 0d 66 40 08 00:02:07.548 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:02:07.547 SET FEATURES [Reserved for Serial ATA]
ec 00 00 00 00 00 a0 00 00:02:07.546 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:02:07.546 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 00:02:07.546 SET FEATURES [Reserved for Serial ATA]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 129 724492
# 2 Short offline Completed: read failure 90% 129 724492
# 3 Short offline Completed: read failure 90% 129 724492
# 4 Short offline Completed: read failure 90% 129 724492
# 5 Short offline Completed: read failure 90% 127 724492
# 6 Short offline Completed: read failure 90% 127 724492
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.