rendered paste body[ 5.363971] usbcore: registered new interface driver usb-storage
[ 5.369188] USB Mass Storage support registered.
[ 5.376824] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.382240] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 5.387647] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.387655] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.393077] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 5.398301] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 5.403561] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.412573] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 5.412605] ehci_hcd 0000:00:1d.7: irq 22, io mem 0x58204400
[ 5.427026] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.432119] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.437384] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.442676] usb usb1: Product: EHCI Host Controller
[ 5.447935] usb usb1: Manufacturer: Linux 3.0.4 ehci_hcd
[ 5.453306] usb usb1: SerialNumber: 0000:00:1d.7
[ 5.459119] hub 1-0:1.0: USB hub found
[ 5.464531] hub 1-0:1.0: 8 ports detected
[ 5.475967] usbcore: registered new interface driver usbhid
[ 5.481283] usbhid: USB HID core driver
[ 5.488741] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.494191] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.499616] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.499624] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.505197] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 5.510720] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00006080
[ 5.516216] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.521614] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.526894] usb usb2: Product: UHCI Host Controller
[ 5.532131] usb usb2: Manufacturer: Linux 3.0.4 uhci_hcd
[ 5.537368] usb usb2: SerialNumber: 0000:00:1d.0
[ 5.542964] hub 2-0:1.0: USB hub found
[ 5.548139] hub 2-0:1.0: 2 ports detected
[ 5.553410] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 5.558607] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.558615] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.563830] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 5.568980] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006060
[ 5.574086] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.579165] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.584254] usb usb3: Product: UHCI Host Controller
[ 5.589298] usb usb3: Manufacturer: Linux 3.0.4 uhci_hcd
[ 5.594366] usb usb3: SerialNumber: 0000:00:1d.1
[ 5.599776] hub 3-0:1.0: USB hub found
[ 5.604875] hub 3-0:1.0: 2 ports detected
[ 5.610084] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 5.615222] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.615230] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.620367] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 5.625518] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
[ 5.630653] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.635834] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.641103] usb usb4: Product: UHCI Host Controller
[ 5.646324] usb usb4: Manufacturer: Linux 3.0.4 uhci_hcd
[ 5.651527] usb usb4: SerialNumber: 0000:00:1d.2
[ 5.657061] hub 4-0:1.0: USB hub found
[ 5.662104] hub 4-0:1.0: 2 ports detected
[ 5.667288] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 5.672440] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5.672448] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.677674] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 5.682799] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00006020
[ 5.687881] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.692936] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.698025] usb usb5: Product: UHCI Host Controller
[ 5.703103] usb usb5: Manufacturer: Linux 3.0.4 uhci_hcd
[ 5.708232] usb usb5: SerialNumber: 0000:00:1d.3
[ 5.713728] hub 5-0:1.0: USB hub found
[ 5.718783] hub 5-0:1.0: 2 ports detected
[ 5.881030] usb 1-4: new high speed USB device number 3 using ehci_hcd
[ 6.167147] usb 1-4: New USB device found, idVendor=04fc, idProduct=2800
[ 6.172283] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.177378] usb 1-4: Product: 1.3M WebCam
[ 6.182390] usb 1-4: Manufacturer: 123
[ 6.564027] usb 2-2: new full speed USB device number 2 using uhci_hcd
[ 6.707214] usb 2-2: New USB device found, idVendor=0cf3, idProduct=3002
[ 6.712310] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.781231] udev[980]: starting version 165
[ 27.956601] PM: Starting manual resume from disk
[ 28.229237] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 30.286119] udev[1178]: starting version 165
[ 31.249662] lib80211: common routines for IEEE802.11 drivers
[ 31.255898] lib80211_crypt: registered algorithm 'NULL'
[ 31.746805] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 31.758241] ACPI: Power Button [PWRB]
[ 31.766422] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 31.781240] ACPI: Sleep Button [SLPB]
[ 31.791508] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 31.801781] ACPI: Lid Switch [LID0]
[ 31.812409] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 31.822817] ACPI: Power Button [PWRF]
[ 31.890074] Bluetooth: Core ver 2.16
[ 31.896770] NET: Registered protocol family 31
[ 31.903158] Bluetooth: HCI device and connection manager initialized
[ 31.909708] Bluetooth: HCI socket layer initialized
[ 31.960502] Linux agpgart interface v0.103
[ 32.101825] wmi: Mapper loaded
[ 32.230867] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 32.297366] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 32.339861] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 32.354393] ACPI: Battery Slot [BAT0] (battery present)
[ 32.400291] thermal LNXTHERM:00: registered as thermal_zone0
[ 32.406961] ACPI: Thermal Zone [THRM] (50 C)
[ 32.418446] ACPI: Fan [FAN] (on)
[ 32.425248] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 32.468117] acer_wmi: Function bitmap for Communication Button: 0x1
[ 32.475030] acer_wmi: Brightness must be controlled by generic video driver
[ 32.485044] input: Acer WMI hotkeys as /devices/virtual/input/input5
[ 32.529184] ACPI: AC Adapter [AC] (on-line)
[ 32.599475] ACPI: acpi_idle yielding to intel_idle
[ 32.606607] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 32.617833] usbcore: registered new interface driver btusb
[ 32.670696] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 32.687157] atl1c 0000:01:00.0: setting latency timer to 64
[ 32.757963] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[ 32.788482] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
[ 32.813211] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 32.826442] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 32.833214] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 32.840881] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[ 32.896537] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 33.219694] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 33.226570] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 33.226601] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 33.322163] Linux video capture interface: v2.00
[ 33.568298] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 33.642396] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 34.044391] [drm] Initialized drm 1.1.0 20060810
[ 34.152537] uvcvideo: Found UVC 1.00 device 1.3M WebCam (04fc:2800)
[ 34.177462] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input7
[ 34.185233] usbcore: registered new interface driver uvcvideo
[ 34.192304] USB Video Class driver (v1.1.0)
[ 34.573312] hda_codec: ALC272X: BIOS auto-probing.
[ 34.584185] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 34.591408] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 34.602627] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 34.609626] i915 0000:00:02.0: setting latency timer to 64
[ 34.718138] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 34.718149] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 34.719826] [drm] Driver supports precise vblank timestamp query.
[ 34.773383] wl: module license 'unspecified' taints kernel.
[ 34.775068] Disabling lock debugging due to kernel taint
[ 34.819792] wl 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 34.821474] wl 0000:02:00.0: setting latency timer to 64
[ 34.853199] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 34.935563] lib80211_crypt: registered algorithm 'TKIP'
[ 34.935828] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.112
[ 35.178733] [drm] initialized overlay support
[ 35.199338] checking generic (40000000 7f0000) vs hw (40000000 10000000)
[ 35.199347] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 35.201118] Console: switching to colour dummy device 80x25
[ 35.202791] fbcon: inteldrmfb (fb0) is primary device
[ 35.240580] fixme: max PWM is zero.
[ 35.240606] Console: switching to colour frame buffer device 128x37
[ 35.248299] fb0: inteldrmfb frame buffer device
[ 35.248383] drm: registered panic notifier
[ 35.563100] acpi device:28: registered as cooling_device2
[ 35.563565] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 35.563844] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 35.564098] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 38.676259] ath3k_load_firmware: Can't change to loading configuration err
[ 38.676441] ath3k: probe of 2-2:1.0 failed with error -110
[ 38.676615] usbcore: registered new interface driver ath3k
[ 39.249123] Adding 1048572k swap on /dev/mapper/cryptvg-swap. Priority:-1 extents:1 across:1048572k
[ 39.400051] fuse init (API version 7.16)
[ 40.286436] EXT4-fs (dm-2): re-mounted. Opts: (null)
[ 40.392321] EXT4-fs (dm-2): re-mounted. Opts: (null)
[ 42.259578] ppdev: user-space parallel port driver
[ 42.268565] lp: driver loaded but no devices found
[ 42.543325] powernow: This module only works with AMD K7 CPUs
[ 42.637782] cpufreq-nforce2: No nForce2 chipset.
[ 57.696366] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[ 82.985962] NET: Registered protocol family 10
[ 93.942068] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 104.546023] eth1: no IPv6 routers present
[ 147.390068] eth1: no IPv6 routers present
[ 148.415947] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[ 159.709196] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 170.114024] eth1: no IPv6 routers present
[ 263.597818] ata1.00: configured for UDMA/133
[ 263.597834] ata1: EH complete
[ 263.598819] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 264.690371] EXT4-fs (dm-2): re-mounted. Opts: commit=600
[ 405.250085] usb 2-2: USB disconnect, device number 2
[ 412.396042] usb 2-1: new full speed USB device number 3 using uhci_hcd
[ 412.533070] usb 2-1: New USB device found, idVendor=0cf3, idProduct=3000
[ 412.533083] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 413.000093] usb 2-1: USB disconnect, device number 3
[ 414.464049] usb 2-1: new full speed USB device number 4 using uhci_hcd
[ 414.603085] usb 2-1: New USB device found, idVendor=0cf3, idProduct=3002
[ 414.603098] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 419.627079] ath3k_load_firmware: Can't change to loading configuration err
[ 419.627157] ath3k: probe of 2-1:1.0 failed with error -110
[ 667.000088] usb 2-1: USB disconnect, device number 4
[ 680.205046] usb 2-1: new full speed USB device number 5 using uhci_hcd
[ 680.343075] usb 2-1: New USB device found, idVendor=0cf3, idProduct=3000
[ 680.343089] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 680.612474] usb 2-1: USB disconnect, device number 5
[ 682.273052] usb 2-1: new full speed USB device number 6 using uhci_hcd
[ 682.411330] usb 2-1: New USB device found, idVendor=0cf3, idProduct=3002
[ 682.411344] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 687.439318] ath3k_load_firmware: Can't change to loading configuration err
[ 687.439411] ath3k: probe of 2-1:1.0 failed with error -110
[ 2786.750121] usb 2-1: USB disconnect, device number 6
[ 2793.796053] usb 2-1: new full speed USB device number 7 using uhci_hcd
[ 2793.935071] usb 2-1: New USB device found, idVendor=0cf3, idProduct=3000
[ 2793.935085] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2794.250077] usb 2-1: USB disconnect, device number 7
[ 2795.706048] usb 2-1: new full speed USB device number 8 using uhci_hcd
[ 2795.845087] usb 2-1: New USB device found, idVendor=0cf3, idProduct=3005
[ 2795.845101] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4140.245230] Bridge firewalling registered
[ 4140.278226] ADDRCONF(NETDEV_UP): pan1: link is not ready
[ 4737.190463] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 5711.250124] usb 2-1: USB disconnect, device number 8
[ 5724.933041] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 5725.122072] usb 3-1: New USB device found, idVendor=0cf3, idProduct=3000
[ 5725.122081] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5725.500090] usb 3-1: USB disconnect, device number 2
[ 5726.956444] usb 3-1: new full speed USB device number 3 using uhci_hcd
[ 5727.147112] usb 3-1: New USB device found, idVendor=0cf3, idProduct=3005
[ 5727.147126] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5797.250090] hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 5797.250105] usb 3-1: USB disconnect, device number 3
[ 5797.250175] btusb_bulk_complete: hci0 urb d9b0fc00 failed to resubmit (19)
[ 5797.251175] btusb_intr_complete: hci0 urb d9b0f900 failed to resubmit (19)
[ 5797.251197] btusb_bulk_complete: hci0 urb d9b0f180 failed to resubmit (19)
[ 5797.463048] usb 3-1: new full speed USB device number 4 using uhci_hcd
[ 5797.601210] usb 3-1: New USB device found, idVendor=0cf3, idProduct=3005
[ 5797.601224] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8129.274939] ata1: hard resetting link
[ 8129.734057] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8129.735116] ata1.00: unexpected _GTF length (4)
[ 8129.736963] ata1.00: unexpected _GTF length (4)
[ 8129.737483] ata1.00: configured for UDMA/133
[ 8129.737724] ata1: EH complete
[ 8129.738757] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8130.004032] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[ 8187.826386] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 8188.459372] psmouse.c: resync failed, issuing reconnect request
[ 8205.909776] eth1: no IPv6 routers present
[ 8209.793443] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[ 8211.156560] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8221.190756] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[ 8221.267967] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8232.242050] eth1: no IPv6 routers present
[ 9611.860162] ata1.00: configured for UDMA/133
[ 9611.860177] ata1: EH complete
[ 9611.860569] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 9612.156492] EXT4-fs (dm-2): re-mounted. Opts: commit=600
[ 9617.701128] ata1: hard resetting link
[ 9618.161055] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9618.162535] ata1.00: unexpected _GTF length (4)
[ 9618.164062] ata1.00: unexpected _GTF length (4)
[ 9618.172803] ata1.00: configured for UDMA/133
[ 9618.173290] ata1: EH complete
[ 9618.173805] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9618.394179] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[17556.074805] wlc_print_ampdu_txstatus: txstatus 0xf063
[17556.074815] wlc_print_ampdu_txstatus: txstatus 0xf063
[17748.534750] wlc_print_ampdu_txstatus: txstatus 0x0075
[18994.976796] wlc_print_ampdu_txstatus: txstatus 0x1163
[19932.580036] wlc_print_ampdu_txstatus: txstatus 0xf063
[19932.580054] wlc_print_ampdu_txstatus: txstatus 0xf063
[20510.990763] wlc_print_ampdu_txstatus: txstatus 0xf163
[20950.749282] wlc_print_ampdu_txstatus: txstatus 0x0075
[20950.749294] wlc_print_ampdu_txstatus: txstatus 0x0075
[20950.750248] wlc_print_ampdu_txstatus: txstatus 0x0075
[20950.751272] wlc_print_ampdu_txstatus: txstatus 0x0075
[20950.751283] wlc_print_ampdu_txstatus: txstatus 0x0075
[20950.751293] wlc_print_ampdu_txstatus: txstatus 0x0075
[21241.568398] wlc_print_ampdu_txstatus: txstatus 0xf163
[21471.661941] wlc_print_ampdu_txstatus: txstatus 0x0075
[21471.661959] wlc_print_ampdu_txstatus: txstatus 0x0075
[21471.661972] wlc_print_ampdu_txstatus: txstatus 0x0075
[21529.724246] wlc_print_ampdu_txstatus: txstatus 0xf163
[22489.419912] wlc_print_ampdu_txstatus: txstatus 0x3163
[22676.504838] wlc_print_ampdu_txstatus: txstatus 0xf163
[22862.628478] wlc_print_ampdu_txstatus: txstatus 0xf163
[23488.877290] wlc_print_ampdu_txstatus: txstatus 0xf163
[23592.842233] wlc_print_ampdu_txstatus: txstatus 0xf163
[24069.672275] wlc_print_ampdu_txstatus: txstatus 0xf063
[24069.672293] wlc_print_ampdu_txstatus: txstatus 0xf063
[24069.672306] wlc_print_ampdu_txstatus: txstatus 0xf063
[24069.672319] wlc_print_ampdu_txstatus: txstatus 0xf063
[24816.994412] wlc_print_ampdu_txstatus: txstatus 0xf063
[24816.994430] wlc_print_ampdu_txstatus: txstatus 0xf063
[24816.994444] wlc_print_ampdu_txstatus: txstatus 0xf063
[24816.994457] wlc_print_ampdu_txstatus: txstatus 0xf063
[24816.994470] wlc_print_ampdu_txstatus: txstatus 0xf063
[24816.994483] wlc_print_ampdu_txstatus: txstatus 0xf063
[24816.994495] wlc_print_ampdu_txstatus: txstatus 0xf063
[24983.584077] wlc_print_ampdu_txstatus: txstatus 0xf163
[25525.456394] wlc_print_ampdu_txstatus: txstatus 0xf063
[25525.456411] wlc_print_ampdu_txstatus: txstatus 0xf063
[25525.456425] wlc_print_ampdu_txstatus: txstatus 0xf063
[25525.456438] wlc_print_ampdu_txstatus: txstatus 0xf063
[25525.456450] wlc_print_ampdu_txstatus: txstatus 0xf063
[25525.456464] wlc_print_ampdu_txstatus: txstatus 0xf063
[25525.456476] wlc_print_ampdu_txstatus: txstatus 0xf063
[25525.456489] wlc_print_ampdu_txstatus: txstatus 0xf063
[25651.136694] wlc_print_ampdu_txstatus: txstatus 0xf163
[25651.142768] wlc_print_ampdu_txstatus: txstatus 0xf063
[25651.142783] wlc_print_ampdu_txstatus: txstatus 0xf063
[27188.263918] wlc_print_ampdu_txstatus: txstatus 0xf163
[27188.264212] wlc_print_ampdu_txstatus: txstatus 0xf163
[28416.455132] wlc_print_ampdu_txstatus: txstatus 0xf163
[28646.065984] wlc_print_ampdu_txstatus: txstatus 0xf063
[28646.065997] wlc_print_ampdu_txstatus: txstatus 0xf063
[28646.066036] wlc_print_ampdu_txstatus: txstatus 0xf063
[28646.066045] wlc_print_ampdu_txstatus: txstatus 0xf063
[28646.066054] wlc_print_ampdu_txstatus: txstatus 0xf063
[28646.066063] wlc_print_ampdu_txstatus: txstatus 0xf063
[28646.066072] wlc_print_ampdu_txstatus: txstatus 0xf063
[28646.066081] wlc_print_ampdu_txstatus: txstatus 0xf063
[28646.066091] wlc_print_ampdu_txstatus: txstatus 0xf063
[28646.066099] wlc_print_ampdu_txstatus: txstatus 0xf063
[28646.066109] wlc_print_ampdu_txstatus: txstatus 0xf063
[28646.066118] wlc_print_ampdu_txstatus: txstatus 0xf063
[28646.066127] wlc_print_ampdu_txstatus: txstatus 0xf063
[28646.066136] wlc_print_ampdu_txstatus: txstatus 0xf063
[28646.066145] wlc_print_ampdu_txstatus: txstatus 0xf063
[28646.066154] wlc_print_ampdu_txstatus: txstatus 0xf063
[28838.036024] wlc_print_ampdu_txstatus: txstatus 0x0075
[28838.036042] wlc_print_ampdu_txstatus: txstatus 0x0075
[28838.056580] wlc_print_ampdu_txstatus: txstatus 0x4163
[29146.840348] wlc_print_ampdu_txstatus: txstatus 0xf163
[29220.369587] ata1.00: configured for UDMA/133
[29220.369601] ata1: EH complete
[29220.370540] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[29220.751611] EXT4-fs (dm-2): re-mounted. Opts: commit=600
[29224.495914] ata1: hard resetting link
[29224.955055] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[29224.955899] ata1.00: unexpected _GTF length (4)
[29224.957586] ata1.00: unexpected _GTF length (4)
[29224.957923] ata1.00: configured for UDMA/133
[29224.958333] ata1: EH complete
[29224.958836] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[29225.138762] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[39222.723512] ata1.00: configured for UDMA/133
[39222.723527] ata1: EH complete
[39222.723923] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[39223.082684] EXT4-fs (dm-2): re-mounted. Opts: commit=600
[39224.119812] ata1: hard resetting link
[39224.579053] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[39224.579913] ata1.00: unexpected _GTF length (4)
[39224.581625] ata1.00: unexpected _GTF length (4)
[39224.581958] ata1.00: configured for UDMA/133
[39224.582362] ata1: EH complete
[39224.582867] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[39224.740679] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[39253.256562] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[39254.611685] ADDRCONF(NETDEV_UP): eth0: link is not ready
[39265.010037] eth1: no IPv6 routers present
[39497.843961] eth1: no IPv6 routers present
[39498.892148] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[39500.245161] ADDRCONF(NETDEV_UP): eth0: link is not ready
[39511.138024] eth1: no IPv6 routers present
[100778.806930] ata1.00: configured for UDMA/133
[100778.806944] ata1: EH complete
[100778.807731] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[100779.261287] EXT4-fs (dm-2): re-mounted. Opts: commit=600
[101024.652681] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[101026.009261] ADDRCONF(NETDEV_UP): eth0: link is not ready
[101026.963675] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[101027.040222] ADDRCONF(NETDEV_UP): eth0: link is not ready
[101037.602025] eth1: no IPv6 routers present
[102349.444555] ata1: hard resetting link
[102349.904057] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[102349.904893] ata1.00: unexpected _GTF length (4)
[102349.906594] ata1.00: unexpected _GTF length (4)
[102349.906929] ata1.00: configured for UDMA/133
[102349.907340] ata1: EH complete
[102349.907842] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[102350.283456] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[159463.065761] ata1.00: configured for UDMA/133
[159463.065774] ata1: EH complete
[159463.130535] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[159463.705925] EXT4-fs (dm-2): re-mounted. Opts: commit=600
[159500.465940] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[159506.739522] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[159508.030533] psmouse.c: resync failed, issuing reconnect request
[159508.091945] ADDRCONF(NETDEV_UP): eth0: link is not ready
[159545.502530] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[159546.325791] psmouse.c: resync failed, issuing reconnect request
[159556.907743] eth1: no IPv6 routers present
[159557.978216] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[159559.333514] ADDRCONF(NETDEV_UP): eth0: link is not ready
[159569.586025] eth1: no IPv6 routers present
[159809.808763] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[159820.857248] psmouse.c: resync failed, issuing reconnect request
[159830.587504] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[159831.944879] ADDRCONF(NETDEV_UP): eth0: link is not ready
[159852.374483] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[159863.390756] psmouse.c: resync failed, issuing reconnect request
[159867.913950] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[159869.267895] ADDRCONF(NETDEV_UP): eth0: link is not ready
[159879.538025] eth1: no IPv6 routers present
[160328.718619] ata1: hard resetting link
[160329.178051] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[160329.178886] ata1.00: unexpected _GTF length (4)
[160329.180196] ata1.00: unexpected _GTF length (4)
[160329.180524] ata1.00: configured for UDMA/133
[160329.180714] ata1: EH complete
[160329.206331] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[160330.377508] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[162006.112126] ata1.00: configured for UDMA/133
[162006.112140] ata1: EH complete
[162006.112628] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[162006.395459] EXT4-fs (dm-2): re-mounted. Opts: commit=600
[162112.889509] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[162112.907151] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[162114.191720] psmouse.c: resync failed, issuing reconnect request
[162114.274125] ADDRCONF(NETDEV_UP): eth0: link is not ready
[162114.329551] xfce4-panel[13441]: segfault at d ip b6a64524 sp bf820d80 error 4 in libc-2.13.so[b69f2000+15c000]
[162115.699408] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[162115.774929] ADDRCONF(NETDEV_UP): eth0: link is not ready
[162126.250037] eth1: no IPv6 routers present
[162178.282687] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[162178.312742] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[162179.595089] psmouse.c: resync failed, issuing reconnect request
[162179.664912] ADDRCONF(NETDEV_UP): eth0: link is not ready
[162184.353281] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[162184.428901] ADDRCONF(NETDEV_UP): eth0: link is not ready
[162186.706495] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[162186.781896] ADDRCONF(NETDEV_UP): eth0: link is not ready
[162190.096527] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[162190.171810] ADDRCONF(NETDEV_UP): eth0: link is not ready
[162192.881509] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[162192.956851] ADDRCONF(NETDEV_UP): eth0: link is not ready
[162203.570024] eth1: no IPv6 routers present
[165073.543811] ata1: hard resetting link
[165074.003052] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[165074.004103] ata1.00: unexpected _GTF length (4)
[165074.005946] ata1.00: unexpected _GTF length (4)
[165074.006452] ata1.00: configured for UDMA/133
[165074.006685] ata1: EH complete
[165074.007525] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[165074.223462] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[168932.291202] ata1.00: configured for UDMA/133
[168932.291215] ata1: EH complete
[168932.291602] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[168932.574298] EXT4-fs (dm-2): re-mounted. Opts: commit=600
[170144.881440] ata1: hard resetting link
[170145.341055] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[170145.341907] ata1.00: unexpected _GTF length (4)
[170145.343583] ata1.00: unexpected _GTF length (4)
[170145.343917] ata1.00: configured for UDMA/133
[170145.344359] ata1: EH complete
[170145.344875] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[170145.529042] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[171430.170440] ata1.00: configured for UDMA/133
[171430.170454] ata1: EH complete
[171430.170846] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[171430.608595] EXT4-fs (dm-2): re-mounted. Opts: commit=600
[175071.637438] ata1: hard resetting link
[175072.099054] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[175072.099895] ata1.00: unexpected _GTF length (4)
[175072.101577] ata1.00: unexpected _GTF length (4)
[175072.102510] ata1.00: configured for UDMA/133
[175072.102716] ata1: EH complete
[175072.103622] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[175072.544360] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[199405.724939] ata1.00: configured for UDMA/133
[199405.724954] ata1: EH complete
[199405.725739] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[199406.196519] EXT4-fs (dm-2): re-mounted. Opts: commit=600
[199543.308315] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[199543.375537] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[199544.142434] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[199544.734418] ADDRCONF(NETDEV_UP): eth0: link is not ready
[199545.173864] psmouse.c: resync failed, issuing reconnect request
[199563.277969] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[199564.105159] psmouse.c: resync failed, issuing reconnect request
[199569.727141] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[199571.082549] ADDRCONF(NETDEV_UP): eth0: link is not ready
[199582.178025] eth1: no IPv6 routers present
[199789.547432] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[199790.898609] ADDRCONF(NETDEV_UP): eth0: link is not ready
[199791.949750] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[199792.028414] ADDRCONF(NETDEV_UP): eth0: link is not ready
[199802.354025] eth1: no IPv6 routers present
[199815.419822] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[199816.236147] psmouse.c: resync failed, issuing reconnect request
[199827.569559] eth1: no IPv6 routers present
[199827.636347] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[199828.732927] ADDRCONF(NETDEV_UP): eth0: link is not ready
[199839.970025] eth1: no IPv6 routers present
[199871.119037] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[199871.955677] psmouse.c: resync failed, issuing reconnect request
[199882.360985] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[199883.721208] ADDRCONF(NETDEV_UP): eth0: link is not ready
[199884.808552] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[199884.885461] ADDRCONF(NETDEV_UP): eth0: link is not ready
[199895.841242] eth1: no IPv6 routers present