rendered paste bodypcpu is available at virtual address 0xc000000000000000.
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Octeon SDK: Cavium Networks Octeon SDK version 2.0.0, build 366
Available Octeon features: SAAD CRYPTO PCIE TRA MGMT_PORT RAID USB NO_WPTR MDIO_CLAUSE_45 NPEI
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #3 r232765:232789M: Sat Mar 10 16:29:11 PST 2012
juli@buuz.redactedconsulting.com:/usr/people/juli/freebsd-src/obj/mips.mips64eb/usr/people/juli/freebsd-src/sys/JOCTEON mips
WARNING: WITNESS option enabled, expect reduced performance.
Create COP2 context zone
real memory = 2128609280 (2078720K bytes)
Physical memory chunk(s):
0x01159000 - 0x0803bfff, 116273152 bytes (28387 pages)
0x081c2000 - 0x0ffc1fff, 132120576 bytes (32256 pages)
0x20000000 - 0x7c3cafff, 1547481088 bytes (377803 pages)
0x410000000 - 0x41fffffff, 268435456 bytes (65536 pages)
avail memory = 2051776512 (1956MB)
AP #1 started!
AP #2 started!
AP #3 started!
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
crypto: <crypto core>
mem: <memory>
nexus0: <MIPS32 root nexus>
Compact flash found in bootbus region 3 (CF 16-bit).
model TRANSCEND
heads 16 tracks 3949 sec_tracks 63 sectors 3980604
cf0: <Octeon Compact Flash Driver> on nexus0
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 700000000 Hz quality 800
Event timer "MIPS32" frequency 700000000 Hz quality 800
rnd0: <Cavium Octeon Random Number Generator> on nexus0
cryptocteon0: <Octeon Secure Coprocessor> on nexus0
crypto: assign cryptocteon0 driver id 0, flags 83886080
crypto: cryptocteon0 registers alg 6 flags 0 maxoplen 0
crypto: cryptocteon0 registers alg 7 flags 0 maxoplen 0
crypto: cryptocteon0 registers alg 1 flags 0 maxoplen 0
crypto: cryptocteon0 registers alg 2 flags 0 maxoplen 0
crypto: cryptocteon0 registers alg 11 flags 0 maxoplen 0
ciu0: <Cavium Octeon Central Interrupt Unit> on nexus0
obio0 on ciu0
uart1: <Octeon-16550 channel 1> on obio0
uart1: fast interrupt
uart1: debug port (115200,n,8,1)
uart0: <Octeon-16550 channel 0> on obio0
uart0: fast interrupt
uart0: console (115200,n,8,1)
owdog0: <Cavium Octeon watchdog timer> on ciu0
octm0: <Cavium Octeon Management Ethernet> on ciu0
octm0: [GIANT-LOCKED]
octm0: bpf attached
octm0: Ethernet address: 00:90:0b:1a:69:7a
octm1: <Cavium Octeon Management Ethernet> on ciu0
octm1: [GIANT-LOCKED]
octm1: bpf attached
octm1: Ethernet address: 00:90:0b:1a:69:7b
octebus0: <Cavium Octeon Ethernet pseudo-bus> on ciu0
cavium-ethernet: Cavium Networks Octeon SDK version 2.0.0, build 366
octebus0: got en0 mask 0x4000000c00008000
octebus0: put en0 mask 0x4000000c00008000
octebus0: got en0 mask 0
octebus0: put en0 mask 0x8000
octebus0: got en0 mask 0
octebus0: put en0 mask 0x8000
octebus0: got en0 mask 0
octebus0: put en0 mask 0x8000
Interface 0 has 4 ports (SGMII)
Warning: Enabling IPD when IPD already enabled.
Warning: Enabling PKO when PKO already enabled.
octe0: <Cavium Octeon SGMII Ethernet> on octebus0
miibus0: <MII bus> on octe0
brgphy0: <BCM5482 1000BASE-T media interface> PHY 0 on miibus0
brgphy0: OUI 0x000af7, model 0x000b, rev. 2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
octe0: bpf attached
octe0: Ethernet address: 00:90:0b:1a:69:7c
octe1: <Cavium Octeon SGMII Ethernet> on octebus0
miibus1: <MII bus> on octe1
brgphy1: <BCM5482 1000BASE-T media interface> PHY 1 on miibus1
brgphy1: OUI 0x000af7, model 0x000b, rev. 2
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
octe1: bpf attached
octe1: Ethernet address: 00:90:0b:1a:69:7d
octe2: <Cavium Octeon SGMII Ethernet> on octebus0
miibus2: <MII bus> on octe2
brgphy2: <BCM5482 1000BASE-T media interface> PHY 2 on miibus2
brgphy2: OUI 0x000af7, model 0x000b, rev. 2
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
octe2: bpf attached
octe2: Ethernet address: 00:90:0b:1a:69:7e
octe3: <Cavium Octeon SGMII Ethernet> on octebus0
miibus3: <MII bus> on octe3
brgphy3: <BCM5482 1000BASE-T media interface> PHY 3 on miibus3
brgphy3: OUI 0x000af7, model 0x000b, rev. 2
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
octe3: bpf attached
octe3: Ethernet address: 00:90:0b:1a:69:7f
pcib0: <Cavium Octeon PCIe bridge> on ciu0
PCIe: Port 0 link active, 1 lanes
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=1
found-> vendor=0x1095, dev=0x3132, revid=0x01
domain=0, bus=1, slot=0, func=0
class=01-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xf0000000, size 7, enabled
map[18]: type Memory, range 64, base 0xf0014000, size 14, enabled
map[20]: type I/O Port, range 32, base 0x4000, size 7, enabled
siis0: <SiI3132 SATA controller> port 0x4000-0x407f mem 0xf0000000-0xf000007f,0xf0014000-0xf0017fff irq 44 at device 0.0 on pci0
siisch0: <SIIS channel> at channel 0 on siis0
siisch1: <SIIS channel> at channel 1 on siis0
pcib1: <Cavium Octeon PCIe bridge> on ciu0
PCIe: Port 1 link active, 1 lanes
pci1: <PCI bus> on pcib1
pci1: domain=1, physical bus=1
found-> vendor=0x168c, dev=0x001c, revid=0x01
domain=1, bus=1, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=0
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xf0000000, size 16, enabled
ath0: <Atheros 5424/2424> mem 0xf0000000-0xf000ffff irq 44 at device 0.0 on pci1
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: AR2425 mac 14.2 RF5424 phy 7.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00a2
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
ath0: using multicast key search
octusb0: <Cavium Octeon USB controller> on ciu0
usbus0 on octusb0
usbus0: bpf attached
octusb0: usbpf: Attached
cryptosoft0: <software crypto> on nexus0
crypto: assign cryptosoft0 driver id 1, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
Device configuration finished.
procfs registered
Timecounter "Octeon" frequency 700000000 Hz quality 900
Timecounters tick every 10.000 msec
crypto: <crypto device>
vlan: initialized, using hash tables with chaining
lo0: bpf attached
siisch0: CONNECT requested
siisch0: SIIS reset...
siisch0: SATA connect time=1900us status=00000113
siisch0: SIIS reset done: devices=00000001
(noperiph:siisch0:0:-1:-1): rescan already queued
usbus0: 480Mbps High Speed USB v2.0
siisch1: SIIS reset...
(aprobe0:siisch0:0:15:0): SIGNATURE: 0000
siisch1: SATA connect timeout time=10000us status=00000000
ugen0.1: <Cavium Networks> at usbus0
uhub0: <Cavium Networks OCTUSB Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
(aprobe0:siisch0:0:0:0): SIGNATURE: 0000
siisch1: SIIS reset done: phy reset found no device
GEOM_PART: partition 1 is not aligned on 516096 bytes
GEOM_PART: partition 2 is not aligned on 516096 bytes
uhub0: 2 ports with 2 removable, self powered
pass0 at siisch0 bus 0 scbus0 target 0 lun 0
pass0: <WDC WD800BEVS-08RST2 08.01G08> ATA-7 SATA 1.x device
pass0: Serial Number WD-WXC608647284
pass0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
pass0: Command Queueing enabled
ada0 at siisch0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD800BEVS-08RST2 08.01G08> ATA-7 SATA 1.x device
ada0: Serial Number WD-WXC608647284
ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
GEOM: new disk ada0
SMP: AP CPU #2 launched.
SMP: AP CPU #1 launched.
SMP: AP CPU #3 launched.
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:ada0 []...
warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored)
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
ugen0.2: <Unknown> at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device