elessar:~ ariela$ dispcal -v -m -gl -qh -H MBP_20120304_1
Setting up the instrument
Instrument Type: ColorMunki
Serial Number: 2018587
Firmware version: 288
Chip ID: 01-adec371200001b
Version string: 'colormunki FW V1.32 Build Nr. 1303'
Calibration Ver.: 6
Production No.: 65745
Set instrument sensor to calibration position,
and then hit any key to continue,
or hit Esc or Q to abort:
Calibration complete
Place instrument on test window.
Hit Esc or Q to give up, any other key to continue:elessar:~ ariela$
elessar:~ ariela$
elessar:~ ariela$ dispcal -v -m -gl -qh -H MBP_20120304_1
Setting up the instrument
Instrument Type: ColorMunki
Serial Number: 2018587
Firmware version: 288
Chip ID: 01-adec371200001b
Version string: 'colormunki FW V1.32 Build Nr. 1303'
Calibration Ver.: 6
Production No.: 65745
Set instrument sensor to calibration position,
and then hit any key to continue,
or hit Esc or Q to abort:
Calibration complete
Place instrument on test window.
Hit Esc or Q to give up, any other key to continue:
Target white = native white point
Target white brightness = native brightness
Target black brightness = native brightness
Target gamma = L* curve
Commencing device calibration
patch 6 of 6
Black = XYZ 0.28 0.28 0.42
Red = XYZ 55.60 28.95 1.53
Green = XYZ 55.85 105.34 16.72
Blue = XYZ 29.29 11.42 153.40
White = XYZ 138.41 144.72 164.53
patch 80 of 80
Initial native brightness target = 144.724929 cd/m^2
Target white value is XYZ 138.407977 144.724929 164.529298
Adjusted target black XYZ 0.26 0.28 0.31, Lab 1.72 0.00 0.00
Target black after min adjust: XYZ 0.350 0.365 0.415, Lab 2.281 0.000 0.000
Gamma curve input offset = 0.000000, output offset = 0.002525, power = 0.000000
Total Iteration 4, Final Samples = 96 Final Repeat threshold = 0.400000
Creating initial calibration curves...
Doing iteration 1 with 12 sample points and repeat threshold of 1.131371 DE
patch 12 of 12
Brightness error = 0.000000 cd/m^2 (is 144.504842, should be 144.504842)
White point error = 0.000000 deltaE
Maximum neutral error (@ 0.065376) = 1.095391 deltaE
Average neutral error = 0.611905 deltaE
Number of measurements taken = 25
Computing update to calibration curves...
Doing iteration 2 with 24 sample points and repeat threshold of 0.800000 DE
patch 24 of 24
Brightness error = 0.000000 cd/m^2 (is 144.394619, should be 144.394619)
White point error = 0.000000 deltaE
Maximum neutral error (@ 0.087014) = 1.094461 deltaE
Average neutral error = 0.466577 deltaE
Failed to meet target 0.800000 delta E, got worst case 1.094461
Number of measurements taken = 102
Computing update to calibration curves...
Doing iteration 3 with 48 sample points and repeat threshold of 0.565685 DE
patch 48 of 48
Brightness error = 0.000000 cd/m^2 (is 144.233313, should be 144.233313)
White point error = 0.000000 deltaE
Maximum neutral error (@ 0.178335) = 0.894928 deltaE
Average neutral error = 0.439837 deltaE
Failed to meet target 0.565685 delta E, got worst case 1.094461
Number of measurements taken = 222
Computing update to calibration curves...
Doing iteration 4 with 96 sample points and repeat threshold of 0.400000 DE
patch 96 of 96
Brightness error = 0.000000 cd/m^2 (is 143.954657, should be 143.954657)
White point error = 0.000000 deltaE
Maximum neutral error (@ 0.096276) = 1.717726 deltaE
Average neutral error = 0.495759 deltaE
Failed to meet target 0.400000 delta E, got worst case 1.134292
Number of measurements taken = 926
The instrument can be removed from the screen.
Written calibration file 'MBP_20120304_1.cal'
elessar:~ ariela$ targen -v -w -d3 -g 32 MBP_20120304_1
RGB test chart
Compostie Grey steps = 32
Full spread patches = 836
Degree of adaptation: 0.100
Adaptation weights: Device = 0.935, Perceptual = 0.065, Curvature = 0.010
Perceptual cache resolution = 11
Acceleration grid res = 10
There are 32 unique fixed points to add (35 total fixed points)
There are 801 far spread points to add
Added 833/833
After seeding points: MinPoint = 5.358, Min = 4.925, Avg. = 8.814, Max = 11.293, 0.5 secs
Re-seeding
It 1: Maxmv = 0.049761, MinPoint = 5.358, Min = 3.498, Avg. = 8.849, Max = 11.493, 0.5 secs.
Re-seeding
It 2: Maxmv = 0.046361, MinPoint = 5.358, Min = 4.925, Avg. = 8.810, Max = 11.192, 0.5 secs.
Re-seeding
It 3: Maxmv = 0.034787, MinPoint = 5.358, Min = 4.925, Avg. = 8.759, Max = 10.997, 0.5 secs.
Fixing up veronoi
It 4: Maxmv = 0.021185, MinPoint = 5.358, Min = 4.925, Avg. = 8.730, Max = 10.740, 0.3 secs.
Fixing up veronoi
It 5: Maxmv = 0.010910, MinPoint = 5.358, Min = 4.925, Avg. = 8.716, Max = 10.652, 0.3 secs.
Fixing up veronoi
It 6: Maxmv = 0.000923, MinPoint = 5.358, Min = 4.925, Avg. = 8.715, Max = 10.661, 0.2 secs.
After optimization: MinPoint = 5.358, Min = 4.925, Avg. = 8.715, Max = 10.661
Total number of patches = 836
Execution time = 2.750000 seconds
elessar:~ ariela$ dispread -v -k MBP_20120304_1.cal -H MBP_20120304_1
Number of patches = 836
Setting up the instrument
Instrument Type: ColorMunki
Serial Number: 2018587
Firmware version: 288
Chip ID: 01-adec371200001b
Version string: 'colormunki FW V1.32 Build Nr. 1303'
Calibration Ver.: 6
Production No.: 65745
Set instrument sensor to calibration position,
and then hit any key to continue,
or hit Esc or Q to abort:
Calibration complete
Place instrument on test window.
Hit Esc or Q to give up, any other key to continue:
patch 836 of 836
The instrument can be removed from the screen.
Written 'MBP_20120304_1.ti3'
elessar:~ ariela$ colprof -v -qh -al MBP_20120304_1
No of test patches = 836
Estimating white point
Approximate White point XYZ = 0.956175 1.000150 1.146675, Lab = 100.005800 -1.416026 -23.197959
Creating optimised per channel curves
Initial White Point XYZ 0.956175 1.000150 1.146675, Lab 100.005800 -1.416026 -23.197959
About to optimise temporary matrix
100%
About to optimise input curves and matrix
100%
About to optimise output curves and matrix
100%
About to optimise input curves and matrix again
100%
About to optimise input, matrix and output together
100%
About to adjust a and b output curves for white point
About to create grid position input curves
Create final clut from scattered data
******************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************
Doing White point fine tune:
Before fine tune, rel WP = XYZ 0.964548 1.000118 0.826022, Lab 100.004553 0.040517 -0.082747
After fine tune, rel WP = XYZ 0.964200 1.000000 0.824900, Lab 100.000000 0.000000 -0.000000
Creating fast inverse input lookups
White point XYZ = 0.956589 1.000287 1.148251, Lab = 100.011080 -1.366900 -23.291070
Find black point
Black point XYZ = 0.004472 0.004766 0.005100, Lab = 4.304790 -0.496209 -2.207071
Display Luminance = 142.918854
Done A to B table creation
Setting up B to A table lookup
Creating B to A tables
Rev cache RAM = 1610 Mbytes
There is 1 rev cache instance with 1610 Mbytes limit
There are 2 rev cache instances with 805 Mbytes limit
100%
Done B to A tables
There is 1 rev cache instance with 1610 Mbytes limit
Profile check complete, peak err = 2.331465, avg err = 0.487247, RMS = 0.574028
profcheck log:
No of test patches = 836
Profile check complete, errors(CIEDE2000): max. = 1.172170, avg. = 0.222190, RMS = 0.266520
elessar:~ ariela$ dispcal -yl -r
Set instrument sensor to calibration position,
and then hit any key to continue,
or hit Esc or Q to abort:
Calibration complete
Place instrument on test window.
Hit Esc or Q to give up, any other key to continue:
Current calibration response:
Black level = 0.32 cd/m^2
White level = 162.04 cd/m^2
Aprox. gamma = 2.25
Contrast ratio = 507:1
White chromaticity coordinates 0.3088, 0.3232
White Correlated Color Temperature = 6775K, DE 2K to locus = 3.2
White Correlated Daylight Temperature = 6776K, DE 2K to locus = 1.5
White Visual Color Temperature = 6646K, DE 2K to locus = 3.1
White Visual Daylight Temperature = 6837K, DE 2K to locus = 1.5
The instrument can be removed from the screen.