rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-1-686-pae (Debian 3.2.6-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-14) ) #1 SMP Fri Feb 17 06:27:21 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
[ 0.000000] BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff8e000 - 000000007ffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffd0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/P5G41-M LE, BIOS 0310 11/12/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7ff80 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 36c10000 - 37600000
[ 0.000000] ACPI: RSDP 000fb800 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 7ff80100 0005C (v01 A_M_I_ OEMXSDT 11000912 MSFT 00000097)
[ 0.000000] ACPI: FACP 7ff80290 000F4 (v03 A_M_I_ OEMFACP 11000912 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7ff80440 0732E (v01 A1419 A1419000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 7ff8e000 00040
[ 0.000000] ACPI: APIC 7ff80390 0006C (v01 A_M_I_ OEMAPIC 11000912 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7ff80400 0003C (v01 A_M_I_ OEMMCFG 11000912 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ff8e040 00089 (v01 A_M_I_ AMI_OEM 11000912 MSFT 00000097)
[ 0.000000] ACPI: HPET 7ff87770 00038 (v01 A_M_I_ OEMHPET 11000912 MSFT 00000097)
[ 0.000000] ACPI: GSCI 7ff8e0d0 02024 (v01 A_M_I_ GMCHSCI 11000912 MSFT 00000097)
[ 0.000000] ACPI: SSDT 7ff90580 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1157MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0007ff80
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0007ff80
[ 0.000000] On node 0 totalpages: 524045
[ 0.000000] free_area_init_node: node 0, pgdat c1409b80, node_mem_map f5c10200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2316 pages used for memmap
[ 0.000000] HighMem zone: 294006 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7600000 s33024 r0 d24320 u524288
[ 0.000000] pcpu-alloc: s33024 r0 d24320 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519949
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-686-pae root=UUID=dc20fc8e-295b-4c3f-8128-6b7e5499a100 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0007ff80)
[ 0.000000] Memory: 2063356k/2096640k available (2811k kernel code, 32824k reserved, 1353k data, 408k init, 1185288k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1412000 - 0xc1478000 ( 408 kB)
[ 0.000000] .data : 0xc12bed6c - 0xc1411440 (1353 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12bed6c (2811 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2133.438 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.87 BogoMIPS (lpj=8533752)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004042] Security Framework initialized
[ 0.004048] AppArmor: AppArmor disabled by boot time parameter
[ 0.004063] Mount-cache hash table entries: 512
[ 0.004187] Initializing cgroup subsys cpuacct
[ 0.004193] Initializing cgroup subsys memory
[ 0.004201] Initializing cgroup subsys devices
[ 0.004203] Initializing cgroup subsys freezer
[ 0.004206] Initializing cgroup subsys net_cls
[ 0.004208] Initializing cgroup subsys blkio
[ 0.004238] CPU: Physical Processor ID: 0
[ 0.004240] CPU: Processor Core ID: 0
[ 0.004243] mce: CPU supports 6 MCE banks
[ 0.004252] CPU0: Thermal monitoring enabled (TM2)
[ 0.004255] using mwait in idle threads.
[ 0.004647] ACPI: Core revision 20110623
[ 0.012050] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.012405] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052904] CPU0: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
[ 0.056003] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.056003] PEBS disabled due to CPU errata.
[ 0.056003] ... version: 2
[ 0.056003] ... bit width: 40
[ 0.056003] ... generic registers: 2
[ 0.056003] ... value mask: 000000ffffffffff
[ 0.056003] ... max period: 000000007fffffff
[ 0.056003] ... fixed-purpose events: 3
[ 0.056003] ... event mask: 0000000700000003
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] CPU 1 irqstacks, hard=f58d4000 soft=f58d6000
[ 0.056003] Booting Node 0, Processors #1
[ 0.056003] smpboot cpu 1: start_ip = 99000
[ 0.008000] Initializing CPU#1
[ 0.008000] calibrate_delay_direct() dropping min bogoMips estimate 0 = 5218788
[ 0.144038] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.144075] Brought up 2 CPUs
[ 0.144078] Total of 2 processors activated (8533.50 BogoMIPS).
[ 0.146100] devtmpfs: initialized
[ 0.146100] PM: Registering ACPI NVS region at 7ff8e000 (270336 bytes)
[ 0.146100] print_constraints: dummy:
[ 0.146100] NET: Registered protocol family 16
[ 0.146100] ACPI: bus type pci registered
[ 0.146100] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.146100] PCI: not using MMCONFIG
[ 0.146100] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
[ 0.146100] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 0.146100] PCI: Using configuration type 1 for base access
[ 0.146100] bio: create slab <bio-0> at 0
[ 0.146100] ACPI: Added _OSI(Module Device)
[ 0.146100] ACPI: Added _OSI(Processor Device)
[ 0.146100] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.146100] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.148997] ACPI: EC: Look up EC in DSDT
[ 0.150386] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.153830] ACPI: SSDT 7ff90100 00235 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.154121] ACPI: Dynamic OEM Table Load:
[ 0.154124] ACPI: SSDT (null) 00235 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.154417] ACPI: SSDT 7ff90340 00235 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.154707] ACPI: Dynamic OEM Table Load:
[ 0.154711] ACPI: SSDT (null) 00235 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.154991] ACPI: Interpreter enabled
[ 0.155004] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.155028] ACPI: Using IOAPIC for interrupt routing
[ 0.155049] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.156326] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.156329] PCI: Using MMCONFIG for extended config space
[ 0.162033] ACPI: No dock devices found.
[ 0.162036] HEST: Table not found.
[ 0.162041] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.162128] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.162313] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.162317] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.162319] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.162322] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.162325] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xefffffff]
[ 0.162328] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xffffffff]
[ 0.162333] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000ce000-0x000d2fff])
[ 0.162345] pci 0000:00:00.0: [8086:2e30] type 0 class 0x000600
[ 0.162391] pci 0000:00:01.0: [8086:2e31] type 1 class 0x000604
[ 0.162434] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.162437] pci 0000:00:01.0: PME# disabled
[ 0.162480] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.162496] pci 0000:00:1b.0: reg 10: [mem 0xfbffc000-0xfbffffff 64bit]
[ 0.162563] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.162567] pci 0000:00:1b.0: PME# disabled
[ 0.162588] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.162657] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.162661] pci 0000:00:1c.0: PME# disabled
[ 0.162682] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.162751] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.162755] pci 0000:00:1c.1: PME# disabled
[ 0.162779] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.162819] pci 0000:00:1d.0: reg 20: [io 0xb480-0xb49f]
[ 0.162850] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.162889] pci 0000:00:1d.1: reg 20: [io 0xb800-0xb81f]
[ 0.162920] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.162960] pci 0000:00:1d.2: reg 20: [io 0xb880-0xb89f]
[ 0.162990] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.163030] pci 0000:00:1d.3: reg 20: [io 0xbc00-0xbc1f]
[ 0.163069] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.163088] pci 0000:00:1d.7: reg 10: [mem 0xfbffbc00-0xfbffbfff]
[ 0.163169] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.163174] pci 0000:00:1d.7: PME# disabled
[ 0.163190] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.163253] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
[ 0.163333] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.163376] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[ 0.163389] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.163398] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.163408] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7]
[ 0.163417] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb]
[ 0.163427] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.163464] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[ 0.163478] pci 0000:00:1f.2: reg 10: [io 0xb400-0xb407]
[ 0.163486] pci 0000:00:1f.2: reg 14: [io 0xb080-0xb083]
[ 0.163495] pci 0000:00:1f.2: reg 18: [io 0xb000-0xb007]
[ 0.163503] pci 0000:00:1f.2: reg 1c: [io 0xac00-0xac03]
[ 0.163511] pci 0000:00:1f.2: reg 20: [io 0xa880-0xa88f]
[ 0.163546] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.163550] pci 0000:00:1f.2: PME# disabled
[ 0.163595] pci 0000:01:00.0: [10de:0392] type 0 class 0x000300
[ 0.163605] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.163617] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.163628] pci 0000:01:00.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[ 0.163635] pci 0000:01:00.0: reg 24: [io 0xcc00-0xcc7f]
[ 0.163643] pci 0000:01:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref]
[ 0.163683] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.163691] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.163694] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.163698] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfe9fffff]
[ 0.163702] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.163742] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.163806] pci 0000:02:00.0: [1969:1026] type 0 class 0x000200
[ 0.163830] pci 0000:02:00.0: reg 10: [mem 0xfeac0000-0xfeafffff 64bit]
[ 0.163843] pci 0000:02:00.0: reg 18: [io 0xdc00-0xdc7f]
[ 0.163940] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.163945] pci 0000:02:00.0: PME# disabled
[ 0.163965] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.163975] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.163979] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.163983] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.164035] pci 0000:04:01.0: [105a:3d18] type 0 class 0x000180
[ 0.164053] pci 0000:04:01.0: reg 10: [io 0xec00-0xec7f]
[ 0.164071] pci 0000:04:01.0: reg 18: [io 0xe800-0xe8ff]
[ 0.164082] pci 0000:04:01.0: reg 1c: [mem 0xfebff000-0xfebfffff]
[ 0.164092] pci 0000:04:01.0: reg 20: [mem 0xfebc0000-0xfebdffff]
[ 0.164111] pci 0000:04:01.0: reg 30: [mem 0xfebe0000-0xfebe7fff pref]
[ 0.164139] pci 0000:04:01.0: supports D1
[ 0.164183] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.164187] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.164191] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.164198] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.164201] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.164203] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.164206] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xefffffff] (subtractive decode)
[ 0.164209] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
[ 0.164226] pci_bus 0000:00: on NUMA node 0
[ 0.164229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.164378] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.164423] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.164516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.164557] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.164607] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.164610] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.164612] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.170124] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15)
[ 0.170174] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 12 14 15)
[ 0.170222] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12 14 15)
[ 0.170270] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12 14 15)
[ 0.170317] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.170366] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 12 14 15)
[ 0.170413] ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
[ 0.170458] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 12 14 15)
[ 0.170548] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.170548] vgaarb: loaded
[ 0.170548] vgaarb: bridge control possible 0000:01:00.0
[ 0.170548] PCI: Using ACPI for IRQ routing
[ 0.170548] PCI: pci_cache_line_size set to 64 bytes
[ 0.170548] reserve RAM buffer: 000000000009d400 - 000000000009ffff
[ 0.170548] reserve RAM buffer: 000000007ff80000 - 000000007fffffff
[ 0.170548] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.170548] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.170548] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.176155] Switching to clocksource hpet
[ 0.177868] pnp: PnP ACPI init
[ 0.177881] ACPI: bus type pnp registered
[ 0.177974] pnp 00:00: [bus 00-ff]
[ 0.177977] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.177980] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.177983] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.177985] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.177988] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.177991] pnp 00:00: [mem 0x80000000-0xefffffff window]
[ 0.177993] pnp 00:00: [mem 0xf4000000-0xffffffff window]
[ 0.178042] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.178052] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.178097] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.178101] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.178135] pnp 00:02: [dma 4]
[ 0.178138] pnp 00:02: [io 0x0000-0x000f]
[ 0.178140] pnp 00:02: [io 0x0081-0x0083]
[ 0.178142] pnp 00:02: [io 0x0087]
[ 0.178144] pnp 00:02: [io 0x0089-0x008b]
[ 0.178146] pnp 00:02: [io 0x008f]
[ 0.178148] pnp 00:02: [io 0x00c0-0x00df]
[ 0.178177] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.178189] pnp 00:03: [io 0x0070-0x0071]
[ 0.178197] pnp 00:03: [irq 8]
[ 0.178226] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.178235] pnp 00:04: [io 0x0061]
[ 0.178264] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.178274] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.178279] pnp 00:05: [irq 13]
[ 0.178308] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.178699] pnp 00:06: [irq 7]
[ 0.178701] pnp 00:06: [dma 3]
[ 0.178704] pnp 00:06: [io 0x0378-0x037f]
[ 0.178706] pnp 00:06: [io 0x0778-0x077f]
[ 0.178865] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.178897] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.178900] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.178903] pnp 00:07: [io 0x0290-0x0297]
[ 0.178950] system 00:07: [io 0x0290-0x0297] has been reserved
[ 0.178953] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179060] pnp 00:08: [io 0x0010-0x001f]
[ 0.179063] pnp 00:08: [io 0x0022-0x003f]
[ 0.179065] pnp 00:08: [io 0x0044-0x005f]
[ 0.179067] pnp 00:08: [io 0x0062-0x0063]
[ 0.179069] pnp 00:08: [io 0x0065-0x006f]
[ 0.179071] pnp 00:08: [io 0x0072-0x007f]
[ 0.179074] pnp 00:08: [io 0x0080]
[ 0.179076] pnp 00:08: [io 0x0084-0x0086]
[ 0.179078] pnp 00:08: [io 0x0088]
[ 0.179080] pnp 00:08: [io 0x008c-0x008e]
[ 0.179082] pnp 00:08: [io 0x0090-0x009f]
[ 0.179084] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.179086] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.179089] pnp 00:08: [io 0x0400-0x041f]
[ 0.179091] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.179093] pnp 00:08: [io 0x0800-0x087f]
[ 0.179095] pnp 00:08: [io 0x0400-0x03ff disabled]
[ 0.179098] pnp 00:08: [io 0x0480-0x04bf]
[ 0.179100] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.179102] pnp 00:08: [mem 0xfed20000-0xfed8ffff]
[ 0.179166] system 00:08: [io 0x0400-0x041f] has been reserved
[ 0.179170] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.179173] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.179176] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.179179] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.179183] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.179186] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179252] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.179287] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.179338] pnp 00:0a: [mem 0xffb00000-0xffbfffff]
[ 0.179341] pnp 00:0a: [mem 0xfff00000-0xffffffff]
[ 0.179373] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.179417] pnp 00:0b: [mem 0xffc00000-0xffefffff]
[ 0.179465] system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.179469] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179736] pnp 00:0c: [irq 4]
[ 0.179739] pnp 00:0c: [dma 0 disabled]
[ 0.179741] pnp 00:0c: [io 0x03f8-0x03ff]
[ 0.179823] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.179927] pnp 00:0d: [io 0x0060]
[ 0.179929] pnp 00:0d: [io 0x0064]
[ 0.179932] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[ 0.179934] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[ 0.179987] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.179991] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.179994] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.180071] pnp 00:0e: [mem 0xf0000000-0xf3ffffff]
[ 0.180121] system 00:0e: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.180125] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.180295] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 0.180297] pnp 00:0f: [mem 0x000c0000-0x000cffff]
[ 0.180300] pnp 00:0f: [mem 0x000e0000-0x000fffff]
[ 0.180302] pnp 00:0f: [mem 0x00100000-0x7fffffff]
[ 0.180304] pnp 00:0f: [mem 0xf0000000-0xffffffff]
[ 0.180365] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.180369] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.180372] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.180375] system 00:0f: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.180379] system 00:0f: [mem 0xf0000000-0xffffffff] could not be reserved
[ 0.180382] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.180515] pnp: PnP ACPI: found 16 devices
[ 0.180517] ACPI: ACPI bus type pnp unregistered
[ 0.180520] PnPBIOS: Disabled by ACPI PNP
[ 0.217584] PCI: max bus depth: 1 pci_try_num: 2
[ 0.217616] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[ 0.217620] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80200000-0x803fffff]
[ 0.217624] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.217628] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.217631] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.217634] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.217638] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfe9fffff]
[ 0.217642] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.217647] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.217650] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.217655] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff]
[ 0.217659] pci 0000:00:1c.0: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.217666] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.217669] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.217674] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.217678] pci 0000:00:1c.1: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[ 0.217685] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.217688] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.217693] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.217711] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.217715] pci 0000:00:01.0: setting latency timer to 64
[ 0.217720] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.217725] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.217729] pci 0000:00:1c.0: setting latency timer to 64
[ 0.217738] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.217742] pci 0000:00:1c.1: setting latency timer to 64
[ 0.217749] pci 0000:00:1e.0: setting latency timer to 64
[ 0.217752] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.217755] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.217758] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.217760] pci_bus 0000:00: resource 7 [mem 0x80000000-0xefffffff]
[ 0.217763] pci_bus 0000:00: resource 8 [mem 0xf4000000-0xffffffff]
[ 0.217766] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.217768] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe9fffff]
[ 0.217771] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.217774] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.217776] pci_bus 0000:03: resource 1 [mem 0x80200000-0x803fffff]
[ 0.217779] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.217782] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.217784] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.217787] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[ 0.217790] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.217792] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.217795] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.217797] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.217800] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.217802] pci_bus 0000:04: resource 7 [mem 0x80000000-0xefffffff]
[ 0.217805] pci_bus 0000:04: resource 8 [mem 0xf4000000-0xffffffff]
[ 0.217852] NET: Registered protocol family 2
[ 0.217914] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.218129] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.218461] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.218621] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.218624] TCP reno registered
[ 0.218627] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.218634] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.218706] NET: Registered protocol family 1
[ 0.218817] pci 0000:01:00.0: Boot video device
[ 0.218824] PCI: CLS mismatch (32 != 4), using 64 bytes
[ 0.218875] Unpacking initramfs...
[ 0.493200] Freeing initrd memory: 10176k freed
[ 0.497496] audit: initializing netlink socket (disabled)
[ 0.497514] type=2000 audit(1330648008.492:1): initialized
[ 0.514575] highmem bounce pool size: 64 pages
[ 0.514580] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.521025] VFS: Disk quotas dquot_6.5.2
[ 0.521065] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.521142] msgmni has been set to 1734
[ 0.521324] alg: No test for stdrng (krng)
[ 0.521356] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.521360] io scheduler noop registered
[ 0.521362] io scheduler deadline registered
[ 0.521374] io scheduler cfq registered (default)
[ 0.521456] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.521489] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.521542] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.521578] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.521639] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.521675] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.521863] intel_idle: MWAIT substates: 0x20
[ 0.521865] intel_idle: does not run on family 6 model 15
[ 0.521897] ERST: Table is not found!
[ 0.521898] GHES: HEST is not enabled!
[ 0.521912] isapnp: Scanning for PnP cards...
[ 0.874828] isapnp: No Plug & Play device found
[ 0.874901] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.895239] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.920636] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.936338] Linux agpgart interface v0.103
[ 0.936662] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.939466] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.939472] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.939609] mousedev: PS/2 mouse device common for all mice
[ 0.939661] rtc_cmos 00:03: RTC can wake from S4
[ 0.939762] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.939785] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.939798] cpuidle: using governor ladder
[ 0.939799] cpuidle: using governor menu
[ 0.940010] TCP cubic registered
[ 0.940047] NET: Registered protocol family 10
[ 0.940545] Mobile IPv6
[ 0.940548] NET: Registered protocol family 17
[ 0.940552] Registering the dns_resolver key type
[ 0.940568] Using IPI No-Shortcut mode
[ 0.940687] PM: Hibernation image not present or could not be loaded.
[ 0.940696] registered taskstats version 1
[ 0.944072] rtc_cmos 00:03: setting system clock to 2012-03-02 00:26:49 UTC (1330648009)
[ 0.944114] Initializing network drop monitor service
[ 0.944230] Freeing unused kernel memory: 408k freed
[ 0.944372] Write protecting the kernel text: 2812k
[ 0.944409] Write protecting the kernel read-only data: 1096k
[ 0.944411] NX-protecting the kernel data: 3332k
[ 0.958218] udevd[49]: starting version 175
[ 0.978988] usbcore: registered new interface driver usbfs
[ 0.979014] usbcore: registered new interface driver hub
[ 0.986920] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.986933] ATL1E 0000:02:00.0: setting latency timer to 64
[ 0.997453] SCSI subsystem initialized
[ 1.000718] usbcore: registered new device driver usb
[ 1.001273] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.001313] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.001331] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.001335] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.001360] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.001379] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.001389] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.005275] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.016596] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffbc00
[ 1.032991] libata version 3.00 loaded.
[ 1.040377] sata_promise 0000:04:01.0: version 2.12
[ 1.040391] sata_promise 0000:04:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.044099] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.044126] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.044129] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.044132] usb usb1: Product: EHCI Host Controller
[ 1.044134] usb usb1: Manufacturer: Linux 3.2.0-1-686-pae ehci_hcd
[ 1.044138] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.044567] hub 1-0:1.0: USB hub found
[ 1.044572] hub 1-0:1.0: 8 ports detected
[ 1.044884] ata_piix 0000:00:1f.1: version 2.13
[ 1.044903] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.044936] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.045331] scsi0 : sata_promise
[ 1.045813] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.045897] scsi1 : ata_piix
[ 1.045966] scsi3 : ata_piix
[ 1.046820] scsi2 : sata_promise
[ 1.047026] scsi4 : sata_promise
[ 1.047125] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.047128] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.047157] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 1.047164] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.047170] scsi5 : sata_promise
[ 1.047195] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.047225] ata1: SATA max UDMA/133 mmio m4096@0xfebff000 ata 0xfebff380 irq 16
[ 1.047230] ata2: SATA max UDMA/133 mmio m4096@0xfebff000 ata 0xfebff280 irq 16
[ 1.047233] ata3: SATA max UDMA/133 mmio m4096@0xfebff000 ata 0xfebff200 irq 16
[ 1.047237] ata4: SATA max UDMA/133 mmio m4096@0xfebff000 ata 0xfebff300 irq 16
[ 1.047701] scsi6 : ata_piix
[ 1.047769] scsi7 : ata_piix
[ 1.049353] ata7: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 22
[ 1.049356] ata8: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 22
[ 1.049396] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.049403] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.049406] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.049416] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.049439] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[ 1.049472] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.049475] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.049478] usb usb2: Product: UHCI Host Controller
[ 1.049480] usb usb2: Manufacturer: Linux 3.2.0-1-686-pae uhci_hcd
[ 1.049482] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.049596] hub 2-0:1.0: USB hub found
[ 1.049601] hub 2-0:1.0: 2 ports detected
[ 1.049677] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.049684] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.049687] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.049695] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.049727] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800
[ 1.049756] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.049758] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.049761] usb usb3: Product: UHCI Host Controller
[ 1.049763] usb usb3: Manufacturer: Linux 3.2.0-1-686-pae uhci_hcd
[ 1.049765] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.049881] hub 3-0:1.0: USB hub found
[ 1.049885] hub 3-0:1.0: 2 ports detected
[ 1.049957] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.049963] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.049966] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.049974] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.050004] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
[ 1.050033] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.050035] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.050038] usb usb4: Product: UHCI Host Controller
[ 1.050040] usb usb4: Manufacturer: Linux 3.2.0-1-686-pae uhci_hcd
[ 1.050042] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.050150] hub 4-0:1.0: USB hub found
[ 1.050154] hub 4-0:1.0: 2 ports detected
[ 1.050219] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.050225] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.050229] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.050236] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.050261] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[ 1.050290] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.050293] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.050295] usb usb5: Product: UHCI Host Controller
[ 1.050297] usb usb5: Manufacturer: Linux 3.2.0-1-686-pae uhci_hcd
[ 1.050300] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.050406] hub 5-0:1.0: USB hub found
[ 1.050410] hub 5-0:1.0: 2 ports detected
[ 1.251637] ata7.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 1.251641] ata7.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.251726] ata8.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 1.251728] ata8.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.279079] ata7.01: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 1.279084] ata7.01: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.279183] ata8.01: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 1.279187] ata8.01: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.335620] ata7.00: configured for UDMA/133
[ 1.335715] ata8.00: configured for UDMA/133
[ 1.356037] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[ 1.391572] ata7.01: configured for UDMA/133
[ 1.391654] ata8.01: configured for UDMA/133
[ 1.488638] usb 1-2: New USB device found, idVendor=1a40, idProduct=0101
[ 1.488642] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.488645] usb 1-2: Product: USB 2.0 Hub [MTT]
[ 1.488934] hub 1-2:1.0: USB hub found
[ 1.489009] hub 1-2:1.0: 4 ports detected
[ 1.496039] Refined TSC clocksource calibration: 2133.333 MHz.
[ 1.496045] Switching to clocksource tsc
[ 1.520100] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.555741] ata1.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 1.555745] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.611737] ata1.00: configured for UDMA/133
[ 1.611889] scsi 0:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 1.760142] usb 1-2.4: new low-speed USB device number 3 using ehci_hcd
[ 1.857638] usb 1-2.4: New USB device found, idVendor=046d, idProduct=c517
[ 1.857641] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.857644] usb 1-2.4: Product: USB Receiver
[ 1.857646] usb 1-2.4: Manufacturer: Logitech
[ 1.876625] usbcore: registered new interface driver usbhid
[ 1.876627] usbhid: USB HID core driver
[ 1.932067] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.252045] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.572045] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.572197] scsi 6:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 2.572438] scsi 6:0:1:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 2.572665] scsi 7:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 2.572869] scsi 7:0:1:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 2.580522] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.580575] sd 0:0:0:0: [sda] Write Protect is off
[ 2.580578] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.580601] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.581394] sd 6:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.581446] sd 6:0:0:0: [sdb] Write Protect is off
[ 2.581449] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.581471] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.581955] sd 7:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.582005] sd 7:0:0:0: [sdd] Write Protect is off
[ 2.582008] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.582031] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.599344] sda: sda1 sda2 sda3
[ 2.599712] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.600954] sd 7:0:1:0: [sde] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.602211] sd 6:0:1:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.609376] sdb: sdb1 sdb2 sdb3
[ 2.609474] sd 6:0:1:0: [sdc] Write Protect is off
[ 2.609477] sd 6:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.609501] sd 6:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.623207] sdd: sdd1 sdd2 sdd3
[ 2.623267] sd 7:0:1:0: [sde] Write Protect is off
[ 2.623271] sd 7:0:1:0: [sde] Mode Sense: 00 3a 00 00
[ 2.623314] sd 7:0:1:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.623774] sd 7:0:0:0: [sdd] Attached SCSI disk
[ 2.639415] sdc: sdc1 sdc2 sdc3
[ 2.639514] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 2.639837] sd 6:0:1:0: [sdc] Attached SCSI disk
[ 2.658282] sde: sde1 sde2 sde3
[ 2.659007] sd 7:0:1:0: [sde] Attached SCSI disk
[ 2.661953] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.4/1-2.4:1.0/input/input0
[ 2.662023] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.7-2.4/input0
[ 2.666762] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 2.667611] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.4/1-2.4:1.1/input/input1
[ 2.668313] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-2.4/input1
[ 3.261828] md: raid1 personality registered for level 1
[ 3.263353] async_tx: api initialized (async)
[ 3.263779] xor: automatically using best checksumming function: pIII_sse
[ 3.280003] pIII_sse : 7457.000 MB/sec
[ 3.280005] xor: using function: pIII_sse (7457.000 MB/sec)
[ 3.348026] raid6: int32x1 785 MB/s
[ 3.416072] raid6: int32x2 647 MB/s
[ 3.484048] raid6: int32x4 672 MB/s
[ 3.552067] raid6: int32x8 606 MB/s
[ 3.620011] raid6: mmxx1 2878 MB/s
[ 3.688017] raid6: mmxx2 3171 MB/s
[ 3.756010] raid6: sse1x1 1958 MB/s
[ 3.824020] raid6: sse1x2 2551 MB/s
[ 3.892010] raid6: sse2x1 3612 MB/s
[ 3.960004] raid6: sse2x2 4614 MB/s
[ 3.960006] raid6: using algorithm sse2x2 (4614 MB/s)
[ 3.960911] md: raid6 personality registered for level 6
[ 3.960914] md: raid5 personality registered for level 5
[ 3.960916] md: raid4 personality registered for level 4
[ 3.964077] mdadm: sending ioctl 800c0910 to a partition!
[ 3.964080] mdadm: sending ioctl 800c0910 to a partition!
[ 3.964091] mdadm: sending ioctl 1261 to a partition!
[ 3.964093] mdadm: sending ioctl 1261 to a partition!
[ 3.964447] mdadm: sending ioctl 1261 to a partition!
[ 3.964451] mdadm: sending ioctl 1261 to a partition!
[ 3.964694] mdadm: sending ioctl 1261 to a partition!
[ 3.964697] mdadm: sending ioctl 1261 to a partition!
[ 3.965056] mdadm: sending ioctl 1261 to a partition!
[ 3.965059] mdadm: sending ioctl 1261 to a partition!
[ 4.023887] md: md0 stopped.
[ 4.042247] md: bind<sdd1>
[ 4.042608] md: bind<sde1>
[ 4.042876] md: bind<sda1>
[ 4.043814] md: bind<sdc1>
[ 4.045496] bio: create slab <bio-1> at 1
[ 4.045566] md/raid1:md0: active with 4 out of 4 mirrors
[ 4.045611] md0: detected capacity change from 0 to 80007200768
[ 4.047144] md0: unknown partition table
[ 4.056579] md: md1 stopped.
[ 4.059191] md: bind<sdd3>
[ 4.059444] md: bind<sdb3>
[ 4.059699] md: bind<sde3>
[ 4.060058] md: bind<sda3>
[ 4.060350] md: bind<sdc3>
[ 4.064341] md/raid:md1: device sdc3 operational as raid disk 0
[ 4.064344] md/raid:md1: device sda3 operational as raid disk 4
[ 4.064347] md/raid:md1: device sde3 operational as raid disk 3
[ 4.064349] md/raid:md1: device sdb3 operational as raid disk 2
[ 4.064352] md/raid:md1: device sdd3 operational as raid disk 1
[ 4.064775] md/raid:md1: allocated 5258kB
[ 4.064835] md/raid:md1: raid level 6 active with 5 out of 5 devices, algorithm 2
[ 4.064838] RAID conf printout:
[ 4.064840] --- level:6 rd:5 wd:5
[ 4.064842] disk 0, o:1, dev:sdc3
[ 4.064844] disk 1, o:1, dev:sdd3
[ 4.064846] disk 2, o:1, dev:sdb3
[ 4.064848] disk 3, o:1, dev:sde3
[ 4.064850] disk 4, o:1, dev:sda3
[ 4.064883] md1: detected capacity change from 0 to 4254854873088
[ 4.066843] md1: unknown partition table
[ 4.204201] PM: Starting manual resume from disk
[ 4.204205] PM: Hibernation image partition 8:18 present
[ 4.204206] PM: Looking for hibernation image.
[ 4.204485] PM: Image not found (code -22)
[ 4.204487] PM: Hibernation image not present or could not be loaded.
[ 4.233031] kjournald starting. Commit interval 5 seconds
[ 4.233078] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 5.793836] udevd[335]: starting version 175
[ 6.243618] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 6.243624] ACPI: Power Button [PWRB]
[ 6.243684] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.243687] ACPI: Power Button [PWRF]
[ 6.245123] parport_pc 00:06: reported by Plug and Play ACPI
[ 6.245225] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 6.282784] intel_rng: FWH not detected
[ 6.289062] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.325372] iTCO_vendor_support: vendor-support=0
[ 6.328045] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 6.328141] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[ 6.328615] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.341157] leds_ss4200: no LED devices found
[ 6.494699] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 6.494747] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 6.494772] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 6.546315] hda_codec: ALC887: BIOS auto-probing.
[ 6.552160] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 9.061804] Adding 1959924k swap on /dev/sdb2. Priority:-1 extents:1 across:1959924k
[ 9.139253] Adding 1959924k swap on /dev/sdd2. Priority:-2 extents:1 across:1959924k
[ 9.318306] scsi_verify_blk_ioctl: 358 callbacks suppressed
[ 9.318309] mdadm: sending ioctl 1261 to a partition!
[ 9.318312] mdadm: sending ioctl 1261 to a partition!
[ 9.353367] EXT3-fs (md0): using internal journal
[ 9.469033] mdadm: sending ioctl 800c0910 to a partition!
[ 9.469038] mdadm: sending ioctl 800c0910 to a partition!
[ 9.469044] mdadm: sending ioctl 1261 to a partition!
[ 9.469046] mdadm: sending ioctl 1261 to a partition!
[ 9.498299] mdadm: sending ioctl 1261 to a partition!
[ 9.498303] mdadm: sending ioctl 1261 to a partition!
[ 9.499071] mdadm: sending ioctl 1261 to a partition!
[ 9.499074] mdadm: sending ioctl 1261 to a partition!
[ 9.610143] loop: module loaded
[ 10.036566] kjournald starting. Commit interval 5 seconds
[ 10.037584] EXT3-fs (md1): warning: checktime reached, running e2fsck is recommended
[ 10.079031] EXT3-fs (md1): using internal journal
[ 10.079036] EXT3-fs (md1): mounted filesystem with ordered data mode
[ 10.800746] RPC: Registered named UNIX socket transport module.
[ 10.800749] RPC: Registered udp transport module.
[ 10.800751] RPC: Registered tcp transport module.
[ 10.800753] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.842612] FS-Cache: Loaded
[ 10.864575] FS-Cache: Netfs 'nfs' registered for caching
[ 10.877527] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 11.757097] fuse init (API version 7.17)
[ 15.475159] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
[ 15.475284] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[ 18.523764] Bluetooth: Core ver 2.16
[ 18.523783] NET: Registered protocol family 31
[ 18.523785] Bluetooth: HCI device and connection manager initialized
[ 18.523788] Bluetooth: HCI socket layer initialized
[ 18.523791] Bluetooth: L2CAP socket layer initialized
[ 18.523796] Bluetooth: SCO socket layer initialized
[ 18.554415] Bluetooth: RFCOMM TTY layer initialized
[ 18.554420] Bluetooth: RFCOMM socket layer initialized
[ 18.554422] Bluetooth: RFCOMM ver 1.11
[ 18.577271] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.577274] Bluetooth: BNEP filters: protocol multicast
[ 19.035975] lp0: using parport0 (interrupt-driven).
[ 19.053957] ppdev: user-space parallel port driver
[ 20.423925] hdaps: supported laptop not found!
[ 20.423928] hdaps: driver init failed (ret=-19)!
[ 25.760020] eth0: no IPv6 routers present