rendered paste body<!-- EAGLE version 6.1.0 DTD Copyright (c) 2012 CadSoft Computer GmbH http://www.cadsoft.de This file describes the XML file format used by EAGLE version 6.1.0, hereafter referred to as the "EAGLE File Format". It is made available under the creative commons "CC BY-ND 3.0" license (see http://creativecommons.org/licenses/by-nd/3.0). You may use this file to implement a program that reads and/or writes files in the EAGLE File Format. If your program writes files in the EAGLE File Format, these files must be readable by EAGLE version 6.1.0 without any error messages or warnings.--><!-- ### Entity definitions ############################################### --><!ENTITY % Int "CDATA"> <!-- an integer number --><!ENTITY % Real "CDATA"> <!-- a real number --><!ENTITY % String "CDATA"> <!-- a character string --><!ENTITY % Bool "(no | yes)"><!ENTITY % Coord "%Real;"> <!-- coordinates, given in millimeters --><!ENTITY % Dimension "%Real;"> <!-- dimensions, given in millimeters --><!ENTITY % Layer "%Int;"> <!-- layer number --><!ENTITY % GridUnit "(mic | mm | mil | inch)"><!ENTITY % GridStyle "(lines | dots)"><!ENTITY % WireStyle "(continuous | longdash | shortdash | dashdot)"><!ENTITY % WireCap "(flat | round)"><!ENTITY % WireCurve "%Real;"> <!-- curvature of a wire; allowed range: -359.9..359.9 --><!ENTITY % Class "%Int;"> <!-- net class --><!ENTITY % PadShape "(square | round | octagon | long | offset)"><!ENTITY % ViaShape "(square | round | octagon)"><!ENTITY % TextFont "(vector | proportional | fixed)"><!ENTITY % Rotation "CDATA"> <!-- rotation of an object; allowed range: [MSR]0..359.9 --><!ENTITY % AttributeDisplay "(off | value | name | both)"><!ENTITY % Extent "%String;"> <!-- the layers a via or airwire extends through, given as "topmost-bottommost" --><!ENTITY % PolygonPour "(solid | hatch | cutout)"><!ENTITY % PinVisible "(off | pad | pin | both)"><!ENTITY % PinLength "(point | short | middle | long)"><!ENTITY % PinDirection "(nc | in | out | io | oc | pwr | pas | hiz | sup)"><!ENTITY % PinFunction "(none | dot | clk | dotclk)"><!ENTITY % GateAddLevel "(must | can | next | request | always)"><!ENTITY % ContactRoute "(all | any)"><!ENTITY % DimensionType "(parallel | horizontal | vertical | radius | diameter | leader)"><!ENTITY % Severity "(info | warning | error)"><!ENTITY % Align "(bottom-left | bottom-center | bottom-right | center-left | center | center-right | top-left | top-center | top-right)"><!ENTITY % VerticalText "(up | down)"><!-- ### Drawing definitions ############################################## --><!ELEMENT eagle (compatibility?, drawing)><!ATTLIST eagle version %Real; #REQUIRED -- the EAGLE program version that generated this file, in the form V.RR -- ><!ELEMENT compatibility (note)*><!ELEMENT note (#PCDATA)><!ATTLIST note version %Real; #REQUIRED -- the EAGLE program version that introduced this compatibility note -- severity %Severity; #REQUIRED ><!ELEMENT drawing (settings?, grid?, layers, (library | schematic | board))><!ELEMENT library (description?, packages?, symbols?, devicesets?)><!ATTLIST library name %String; #REQUIRED -- only in libraries used inside boards or schematics -- ><!ELEMENT schematic (description?, libraries?, attributes?, variantdefs?, classes?, parts?, sheets?, errors?)><!ATTLIST schematic xreflabel %String; #IMPLIED xrefpart %String; #IMPLIED ><!ELEMENT board (description?, plain?, libraries?, attributes?, variantdefs?, classes?, designrules?, autorouter?, elements?, signals?, errors?)><!-- ### High level objects ############################################### --><!ELEMENT sheet (description?, plain?, instances?, busses?, nets?)><!ELEMENT package (description?, (polygon | wire | text | circle | rectangle | frame | hole | pad | smd)*)><!ATTLIST package name %String; #REQUIRED ><!ELEMENT symbol (description?, (polygon | wire | text | pin | circle | rectangle | frame)*)><!ATTLIST symbol name %String; #REQUIRED ><!ELEMENT deviceset (description?, gates, devices)><!ATTLIST deviceset name %String; #REQUIRED prefix %String; "" uservalue %Bool; "no" ><!ELEMENT device (connects?, technologies?)><!ATTLIST device name %String; "" package %String; #IMPLIED ><!ELEMENT bus (segment)*><!ATTLIST bus name %String; #REQUIRED ><!ELEMENT net (segment)*><!ATTLIST net name %String; #REQUIRED class %Class; "0" ><!ELEMENT segment (pinref | wire | junction | label)*> <!-- 'pinref' and 'junction' are only valid in a <net> context --><!ELEMENT signal (contactref | polygon | wire | via)*><!ATTLIST signal name %String; #REQUIRED class %Class; "0" airwireshidden %Bool; "no" ><!-- ### Basic objects #################################################### --><!ELEMENT variantdef EMPTY><!ATTLIST variantdef name %String; #REQUIRED ><!ELEMENT variant EMPTY><!ATTLIST variant name %String; #REQUIRED populate %Bool; "yes" value %String; #IMPLIED technology %String; #IMPLIED -- only in part context -- ><!ELEMENT gate EMPTY><!ATTLIST gate name %String; #REQUIRED symbol %String; #REQUIRED x %Coord; #REQUIRED y %Coord; #REQUIRED addlevel %GateAddLevel; "next" swaplevel %Int; "0" ><!ELEMENT wire EMPTY><!ATTLIST wire x1 %Coord; #REQUIRED y1 %Coord; #REQUIRED x2 %Coord; #REQUIRED y2 %Coord; #REQUIRED width %Dimension; #REQUIRED layer %Layer; #REQUIRED extent %Extent; #IMPLIED -- only applicable for airwires -- style %WireStyle; "continuous" curve %WireCurve; "0" cap %WireCap; "round" -- only applicable if 'curve' is not zero -- ><!ELEMENT dimension EMPTY><!ATTLIST dimension x1 %Coord; #REQUIRED y1 %Coord; #REQUIRED x2 %Coord; #REQUIRED y2 %Coord; #REQUIRED x3 %Coord; #REQUIRED y3 %Coord; #REQUIRED layer %Layer; #REQUIRED dtype %DimensionType; "parallel" ><!ELEMENT text (#PCDATA)><!ATTLIST text x %Coord; #REQUIRED y %Coord; #REQUIRED size %Dimension; #REQUIRED layer %Layer; #REQUIRED font %TextFont; "proportional" ratio %Int; "8" rot %Rotation; "R0" align %Align; "bottom-left" ><!ELEMENT circle EMPTY><!ATTLIST circle x %Coord; #REQUIRED y %Coord; #REQUIRED radius %Coord; #REQUIRED width %Dimension; #REQUIRED layer %Layer; #REQUIRED ><!ELEMENT rectangle EMPTY><!ATTLIST rectangle x1 %Coord; #REQUIRED y1 %Coord; #REQUIRED x2 %Coord; #REQUIRED y2 %Coord; #REQUIRED layer %Layer; #REQUIRED rot %Rotation; "R0" ><!ELEMENT frame EMPTY><!ATTLIST frame x1 %Coord; #REQUIRED y1 %Coord; #REQUIRED x2 %Coord; #REQUIRED y2 %Coord; #REQUIRED columns %Int; #REQUIRED rows %Int; #REQUIRED layer %Layer; #REQUIRED border-left %Bool; "yes" border-top %Bool; "yes" border-right %Bool; "yes" border-bottom %Bool; "yes" ><!ELEMENT hole EMPTY><!ATTLIST hole x %Coord; #REQUIRED y %Coord; #REQUIRED drill %Dimension; #REQUIRED ><!ELEMENT pad EMPTY><!ATTLIST pad name %String; #REQUIRED x %Coord; #REQUIRED y %Coord; #REQUIRED drill %Dimension; #REQUIRED diameter %Dimension; "0" shape %PadShape; "round" rot %Rotation; "R0" stop %Bool; "yes" thermals %Bool; "yes" first %Bool; "no" ><!ELEMENT smd EMPTY><!ATTLIST smd name %String; #REQUIRED x %Coord; #REQUIRED y %Coord; #REQUIRED dx %Dimension; #REQUIRED dy %Dimension; #REQUIRED layer %Layer; #REQUIRED roundness %Int; "0" rot %Rotation; "R0" stop %Bool; "yes" thermals %Bool; "yes" cream %Bool; "yes" ><!ELEMENT element (attribute*, variant*)><!ATTLIST element name %String; #REQUIRED library %String; #REQUIRED package %String; #REQUIRED value %String; #REQUIRED x %Coord; #REQUIRED y %Coord; #REQUIRED locked %Bool; "no" smashed %Bool; "no" rot %Rotation; "R0" ><!ELEMENT via EMPTY><!ATTLIST via x %Coord; #REQUIRED y %Coord; #REQUIRED extent %Extent; #REQUIRED drill %Dimension; #REQUIRED diameter %Dimension; "0" shape %ViaShape; "round" alwaysstop %Bool; "no" ><!ELEMENT polygon (vertex)*> <!-- the vertices must define a valid polygon; if the last vertex is the same as the first one, it is ignored --><!ATTLIST polygon width %Dimension; #REQUIRED layer %Layer; #REQUIRED spacing %Dimension; #IMPLIED pour %PolygonPour; "solid" isolate %Dimension; #IMPLIED -- only in <signal> or <package> context -- orphans %Bool; "no" -- only in <signal> context -- thermals %Bool; "yes" -- only in <signal> context -- rank %Int; "0" -- 1..6 in <signal> context, 0 or 7 in <package> context -- ><!ELEMENT vertex EMPTY><!ATTLIST vertex x %Coord; #REQUIRED y %Coord; #REQUIRED curve %WireCurve; "0" -- the curvature from this vertex to the next one -- ><!ELEMENT pin EMPTY><!ATTLIST pin name %String; #REQUIRED x %Coord; #REQUIRED y %Coord; #REQUIRED visible %PinVisible; "both" length %PinLength; "long" direction %PinDirection; "io" function %PinFunction; "none" swaplevel %Int; "0" rot %Rotation; "R0" ><!ELEMENT part (attribute*, variant*)><!ATTLIST part name %String; #REQUIRED library %String; #REQUIRED deviceset %String; #REQUIRED device %String; #REQUIRED technology %String; "" value %String; #IMPLIED ><!ELEMENT instance (attribute)*><!ATTLIST instance part %String; #REQUIRED gate %String; #REQUIRED x %Coord; #REQUIRED y %Coord; #REQUIRED smashed %Bool; "no" rot %Rotation; "R0" -- only 0, 90, 180 or 270 -- ><!ELEMENT label EMPTY><!ATTLIST label x %Coord; #REQUIRED y %Coord; #REQUIRED size %Dimension; #REQUIRED layer %Layer; #REQUIRED font %TextFont; "proportional" ratio %Int; "8" rot %Rotation; "R0" -- only 0, 90, 180 or 270 -- xref %Bool; "no" -- only in <net> context -- ><!ELEMENT junction EMPTY><!ATTLIST junction x %Coord; #REQUIRED y %Coord; #REQUIRED ><!ELEMENT connect EMPTY><!ATTLIST connect gate %String; #REQUIRED pin %String; #REQUIRED pad %String; #REQUIRED route %ContactRoute; "all" ><!ELEMENT technology (attribute)*><!ATTLIST technology name %String; #REQUIRED ><!ELEMENT attribute EMPTY><!ATTLIST attribute name %String; #REQUIRED value %String; #IMPLIED x %Coord; #IMPLIED y %Coord; #IMPLIED size %Dimension; #IMPLIED layer %Layer; #IMPLIED font %TextFont; #IMPLIED ratio %Int; #IMPLIED rot %Rotation; "R0" display %AttributeDisplay; "value" -- only in <element> or <instance> context -- constant %Bool; "no" -- only in <device> context -- ><!ELEMENT pinref EMPTY><!ATTLIST pinref part %String; #REQUIRED gate %String; #REQUIRED pin %String; #REQUIRED ><!ELEMENT contactref EMPTY><!ATTLIST contactref element %String; #REQUIRED pad %String; #REQUIRED route %ContactRoute; "all" ><!-- ### Object lists ##################################################### --><!ELEMENT variantdefs (variantdef)*><!ELEMENT settings (setting)*><!ELEMENT sheets (sheet)*><!ELEMENT layers (layer)*><!ELEMENT packages (package)*><!ELEMENT symbols (symbol)*><!ELEMENT devicesets (deviceset)*><!ELEMENT gates (gate)*><!ELEMENT devices (device)*><!ELEMENT libraries (library)*><!ELEMENT connects (connect)*><!ELEMENT technologies (technology)*><!ELEMENT attributes (attribute)*><!ELEMENT classes (class)*><!ELEMENT parts (part)*><!ELEMENT instances (instance)*><!ELEMENT errors (approved)*><!ELEMENT plain (polygon | wire | text | circle | rectangle | frame | hole)*><!ELEMENT designrules (description*, param*)><!ELEMENT autorouter (pass)*><!ELEMENT elements (element)*><!ELEMENT signals (signal)*><!ELEMENT busses (bus)*><!ELEMENT nets (net)*><!-- ### Miscellaneous objects ############################################ --><!ELEMENT setting EMPTY><!ATTLIST setting alwaysvectorfont %Bool; #IMPLIED verticaltext %VerticalText; "up" ><!ELEMENT grid EMPTY><!ATTLIST grid distance %Real; #IMPLIED unitdist %GridUnit; #IMPLIED unit %GridUnit; #IMPLIED style %GridStyle; "lines" multiple %Int; "1" display %Bool; "no" altdistance %Real; #IMPLIED altunitdist %GridUnit; #IMPLIED altunit %GridUnit; #IMPLIED ><!ELEMENT layer EMPTY><!ATTLIST layer number %Layer; #REQUIRED name %String; #REQUIRED color %Int; #REQUIRED fill %Int; #REQUIRED visible %Bool; "yes" active %Bool; "yes" ><!ELEMENT class (clearance)*><!ATTLIST class number %Class; #REQUIRED name %String; #REQUIRED width %Dimension; "0" drill %Dimension; "0" ><!ELEMENT clearance EMPTY><!ATTLIST clearance class %Class; #REQUIRED value %Dimension; "0" ><!ELEMENT description (#PCDATA)><!ATTLIST description language %String; "en" ><!ELEMENT param EMPTY><!ATTLIST param name %String; #REQUIRED value %String; #REQUIRED ><!ELEMENT pass (param)*><!ATTLIST pass name %String; #REQUIRED refer %String; #IMPLIED active %Bool; "yes" ><!ELEMENT approved EMPTY><!ATTLIST approved hash %String; #REQUIRED >