rendered paste body<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 3.0.1-ge2433f2 (android-build@apa28.mtv.corp.google.com) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Fri Nov 11 18:34:30 PST 2011
<4>[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387f
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: Tuna
<6>[ 0.000000] Reserving 16777216 bytes SDRAM for VRAM
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
<6>[ 0.000000] OMAP4460 ES1.1
<6>[ 0.000000] SRAM: Mapped pa 0x4030d000 to va 0xfe40d000 size: 0x1000
<6>[ 0.000000] SMC: Allocated workspace of 0x300000 Bytes at (0xbfd00000)
<7>[ 0.000000] On node 0 totalpages: 165888
<7>[ 0.000000] free_area_init_node: node 0, pgdat c078c0a0, node_mem_map c08e3000
<7>[ 0.000000] Normal zone: 256 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
<7>[ 0.000000] HighMem zone: 1792 pages used for memmap
<7>[ 0.000000] HighMem zone: 131328 pages, LIFO batch:31
<6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c10ea000 s6816 r8192 d13664 u32768
<7>[ 0.000000] pcpu-alloc: s6816 r8192 d13664 u32768 alloc=8*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 163840
<5>[ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 mem=1G vmalloc=768M omap_wdt.timer_margin=30 no_console_suspend androidboot.serialno=016B80621600D00C androidboot.bootloader=PRIMEKL01 androidboot.baseband=I515.FA02 lcd_bootfb=0xbea70000 mms_ts.panel_id=18 androidboot.cdma=I515.FA02 androidboot.macaddr=2C:44:01:CA:7F:DB
<6>[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>[ 0.000000] Memory: 512MB 136MB = 648MB total
<5>[ 0.000000] Memory: 644664k/644664k available, 403912k reserved, 532480K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
<5>[ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .init : 0xc0008000 - 0xc004d000 ( 276 kB)
<5>[ 0.000000] .text : 0xc004d000 - 0xc0736000 (7076 kB)
<5>[ 0.000000] .data : 0xc0736000 - 0xc078cb80 ( 347 kB)
<5>[ 0.000000] .bss : 0xc078cba4 - 0xc08e25a8 (1367 kB)
<6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] NR_IRQS:410
<4>[ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
<6>[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
<6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
<6>[ 0.000061] Calibrating delay loop... 1194.24 BogoMIPS (lpj=4665344)
<6>[ 0.070404] pid_max: default: 32768 minimum: 301
<6>[ 0.070770] Mount-cache hash table entries: 512
<6>[ 0.070770] Initializing cgroup subsys debug
<6>[ 0.070770] Initializing cgroup subsys cpuacct
<6>[ 0.071716] Initializing cgroup subsys freezer
<6>[ 0.071838] CPU: Testing write buffer coherency: ok
<6>[ 0.072113] L310 cache controller enabled
<6>[ 0.072143] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache size: 1048576 B
<4>[ 0.150238] CPU1: Booted secondary processor
<6>[ 0.181518] Brought up 2 CPUs
<6>[ 0.181518] SMP: Total of 2 processors activated (2388.48 BogoMIPS).
<4>[ 0.185363] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
<4>[ 0.185363] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
<4>[ 0.185394] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
<4>[ 0.185394] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
<4>[ 0.185424] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
<4>[ 0.185455] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
<4>[ 0.185455] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
<4>[ 0.185455] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
<4>[ 0.185485] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
<4>[ 0.185546] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
<4>[ 0.185607] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for thermal_sensor
<4>[ 0.185638] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
<4>[ 0.185638] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
<4>[ 0.185638] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck.
<4>[ 0.193725] omap_hwmod: mcpdm: cannot be enabled (3)
<6>[ 0.196380] print_constraints: dummy:
<6>[ 0.196380] NET: Registered protocol family 16
<6>[ 0.196380] GPMC revision 6.0
<6>[ 0.197113] EMIF0 is enabled with IRQ142
<6>[ 0.198028] EMIF1 is enabled with IRQ143
<6>[ 0.198059] Last reset was warm software reset (PRM_RSTST=0x2)
<6>[ 0.198059]
<6>[ 0.198089] HSI: device registered as omap_hwmod: hsi
<6>[ 0.198516] OMAP GPIO hardware version 0.1
<6>[ 0.199890] omap_mux_init: Add partition: #1: core, flags: 2
<6>[ 0.199890] omap_mux_init: Add partition: #2: wkup, flags: 2
<6>[ 0.201232] Tuna HW revision: 19 (Toro unknown), cpu OMAP4460 ES1.1
<6>[ 0.203460] ram_console: got buffer at a0000000, size 200000
<6>[ 0.203460] ram_console: found existing buffer, size 55007, start 55007
<6>[ 0.343841] console [ram-1] enabled
<6>[ 0.345550] Using tuna_oled_factory_info_6500k
<6>[ 0.347503] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio102
<3>[ 0.347503] omap_mux_init_gpio: Could not set gpio102
<6>[ 0.348175] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio101
<3>[ 0.348327] omap_mux_init_gpio: Could not set gpio101
<6>[ 0.548156] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio100
<3>[ 0.548156] omap_mux_init_gpio: Could not set gpio100
<6>[ 0.553955] usb:ehci initialized
<6>[ 0.558349] OMAP DMA hardware revision 0.0
<4>[ 0.558349] omap_rproc_get_pool: carveout memory is unavailable: 0x0, 0x0
<6>[ 0.567077] bio: create slab <bio-0> at 0
<6>[ 0.567626] print_constraints: vwl1271: 2000 mV
<5>[ 0.568939] SCSI subsystem initialized
<6>[ 0.570312] usbcore: registered new interface driver usbfs
<6>[ 0.570556] usbcore: registered new interface driver hub
<6>[ 0.570800] usbcore: registered new device driver usb
<6>[ 0.572113] i2c-gpio i2c-gpio.5: using pins 98 (SDA) and 99 (SCL)
<6>[ 0.587738] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
<4>[ 0.588500] Skipping twl internal clock init and using bootloader value (unknown osc rate)
<6>[ 0.590789] twl6030: PIH (irq 39) chaining IRQs 368..387
<6>[ 0.593200] print_constraints: VUSB: 3300 mV normal standby
<6>[ 0.593780] print_constraints: VMMC: 1800 mV normal standby
<6>[ 0.594451] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
<6>[ 0.594451] print_constraints: VUSIM: 2200 mV normal standby
<6>[ 0.594451] print_constraints: VCXIO: 1800 mV normal standby
<6>[ 0.595550] print_constraints: VDAC: 1800 mV normal standby
<6>[ 0.596771] print_constraints: VAUX1_6030: 3000 mV normal standby
<6>[ 0.597351] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
<6>[ 0.597991] print_constraints: VAUX3_6030: 3100 mV normal standby
<6>[ 0.598999] print_constraints: CLK32KG:
<6>[ 0.599914] print_constraints: CLK32KAUDIO:
<6>[ 0.600372] print_constraints: VDD3:
<6>[ 0.601074] print_constraints: VMEM: at 1250 mV
<6>[ 0.601776] print_constraints: V2V1: 2100 mV normal standby
<6>[ 0.602783] print_constraints: VANA: 2100 mV normal standby
<6>[ 0.611175] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
<6>[ 0.626800] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
<6>[ 0.642425] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
<6>[ 0.643463] omap-rproc omap-rproc.0: dsp is available
<6>[ 0.644073] omap-rproc omap-rproc.1: ipu is available
<6>[ 0.644073] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[ 0.644348] Bluetooth: Core ver 2.16
<6>[ 0.644348] NET: Registered protocol family 31
<6>[ 0.644348] Bluetooth: HCI device and connection manager initialized
<6>[ 0.645599] Bluetooth: HCI socket layer initialized
<6>[ 0.645599] Bluetooth: L2CAP socket layer initialized
<6>[ 0.645599] Bluetooth: SCO socket layer initialized
<6>[ 0.646514] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 0.646759] Switching to clocksource 32k_counter
<6>[ 0.648895] musb-hdrc: version 6.0, musb-dma, peripheral
<7>[ 0.649353] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
<7>[ 0.649383] musb-hdrc: MHDRC RTL version 2.0
<7>[ 0.649749] musb-hdrc: setup fifo_mode 4
<7>[ 0.649749] musb-hdrc: 28/31 max ep, 16384/16384 memory
<6>[ 0.650238] Switched to NOHz mode on CPU #0
<6>[ 0.650238] Switched to NOHz mode on CPU #1
<6>[ 0.650543] musb-hdrc musb-hdrc: USB Peripheral mode controller at fc0ab000 using DMA, IRQ 124
<6>[ 0.650970] NET: Registered protocol family 2
<6>[ 0.651550] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.652679] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.652679] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
<6>[ 0.653137] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.653778] TCP reno registered
<6>[ 0.653778] UDP hash table entries: 128 (order: 0, 4096 bytes)
<6>[ 0.653778] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
<6>[ 0.654113] NET: Registered protocol family 1
<6>[ 0.654968] Trying to unpack rootfs image as initramfs...
<6>[ 0.779998] Freeing initrd memory: 1400K
<6>[ 1.911987] console [ttyFIQ0] enabled
<6>[ 1.911987] Registered FIQ tty driver c79b5600
<6>[ 1.915893] omap-iommu omap-iommu.0: ducati registered
<6>[ 1.916046] omap-iommu omap-iommu.1: tesla registered
<4>[ 1.923187] highmem bounce pool size: 64 pages
<6>[ 1.923431] ashmem: initialized
<6>[ 1.933593] fuse init (API version 7.16)
<6>[ 1.934143] msgmni has been set to 221
<6>[ 1.934387] Registering char device tf_driver (122:0)
<6>[ 1.936370] io scheduler noop registered
<6>[ 1.936553] io scheduler deadline registered
<6>[ 1.936767] io scheduler cfq registered (default)
<6>[ 1.937683] OMAP DSS rev 4.0
<6>[ 1.940795] dsscomp: initializing.
<7>[ 1.940917] misc dsscomp: display0=s6e8aa0
<7>[ 1.941040] misc dsscomp: display1=hdmi_panel
<6>[ 1.941223] misc dsscomp: found 2 displays and 4 overlays
<3>[ 1.941589] could not allocate slot
<6>[ 1.942565] omap-rproc omap-rproc.1: powering up ipu
<6>[ 1.942993] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfully
<6>[ 1.943725] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfully
<6>[ 1.944610] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
<6>[ 1.969390] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
<6>[ 2.006958] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
<6>[ 2.108367] omap_ion_probe: adding heap secure_input of type 2 with ba300000@5a00000
<6>[ 2.108367] omap_ion_probe: adding heap tiler of type 4 with ada00000@6000000
<6>[ 2.108795] omap_ion_probe: adding heap large_surfaces of type 2 with a0200000@2000000
<6>[ 2.108795] omap_ion_probe: adding heap nonsecure_tiler of type 4 with a2200000@2000000
<6>[ 2.109436] PVR: PVRCore_Init
<6>[ 2.109893] PVR: PVRSRVDriverProbe(pDevice=c795c400)
<6>[ 2.109893] PVR: SGX register base: 0x56000000
<6>[ 2.109893] PVR: SGX register size: 65535
<6>[ 2.110351] PVR: SGX IRQ: 53
<6>[ 2.110565] PVR: EnableSystemClocks: Enabling System Clocks
<6>[ 2.110565] PVR_K:(Warning): EnableSGXClocks: Unable to scale SGX frequency (EBUSY) [180, drivers/gpu/pvr/omap4/sysutils_linux.c]
<6>[ 2.111053] PVR_K:(Warning): DisableSGXClocks: Unable to scale SGX frequency (EBUSY) [255, drivers/gpu/pvr/omap4/sysutils_linux.c]
<6>[ 2.111297] PVR: PVRCore_Init: major device 250
<6>[ 2.115936] brd: module loaded
<6>[ 2.122436] loop: module loaded
<6>[ 2.123413] input: barometer as /devices/virtual/input/input0
<6>[ 2.123992] sec_jack_probe : Registering jack driver
<6>[ 2.124755] i2c i2c-4: mpu_probe: 0
<6>[ 2.147827] i2c i2c-4: Installing irq using 205
<6>[ 2.147827] i2c i2c-4: Module Param interface = mpuirq
<4>[ 2.147827] i2c-core: driver [mpu3050] using legacy suspend method
<4>[ 2.148529] i2c-core: driver [mpu3050] using legacy resume method
<6>[ 2.148529] mpu_init: Probe name mpu3050
<6>[ 2.148529] i2c i2c-4: bma250_mod_probe: bma250
<6>[ 2.148986] i2c i2c-4: Installing Accel irq using 282
<3>[ 2.149566] drivers/misc/inv_mpu/accel/bma250.c|bma250_init|320 returning -121
<3>[ 2.149566] i2c i2c-4: Accel init failed -121
<6>[ 2.149566] misc accelirq: Unregistering accelirq
<3>[ 2.149566] i2c i2c-4: Slave registration failed: bma250, -121
<3>[ 2.150085] i2c i2c-4: bma250_mod_probe failed -121
<4>[ 2.150390] bma250_mod: probe of 4-0018 failed with error -121
<6>[ 2.150390] bma250_mod_init: Probe name bma250_mod
<6>[ 2.150787] i2c i2c-4: yas530_mod_probe: yas530
<6>[ 2.150787] i2c i2c-4: Installing Compass irq using 336
<6>[ 2.173553] i2c i2c-4: mpu3050: +yas530
<6>[ 2.173736] yas530_mod_init: Probe name yas530_mod
<6>[ 2.174194] lte_modem_bootloader successfully probed
<6>[ 2.178863] omap_temp_sensor omap_temp_sensor.0: omap_temp_sensor probed
<6>[ 2.182128] m25p80 spi3.0: w25q80 (1024 Kbytes)
<6>[ 2.184600] PPP generic driver version 2.4.2
<6>[ 2.184600] PPP Deflate Compression module registered
<6>[ 2.184600] PPP BSD Compression module registered
<6>[ 2.188781] PPP MPPE Compression module registered
<6>[ 2.188812] NET: Registered protocol family 24
<6>[ 2.188812] tun: Universal TUN/TAP device driver, 1.6
<6>[ 2.191101] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 2.191101] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 2.191833] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
<6>[ 2.192077] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
<6>[ 2.192077] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
<6>[ 2.208374] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
<6>[ 2.208374] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 2.208740] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 2.209045] usb usb1: Product: OMAP-EHCI Host Controller
<6>[ 2.209045] usb usb1: Manufacturer: Linux 3.0.1-ge2433f2 ehci_hcd
<6>[ 2.209320] usb usb1: SerialNumber: ehci-omap.0
<6>[ 2.209686] hub 1-0:1.0: USB hub found
<6>[ 2.210021] hub 1-0:1.0: 3 ports detected
<6>[ 2.240936] usbcore: registered new interface driver cdc_acm
<6>[ 2.240936] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[ 2.241455] Initializing USB Mass Storage driver...
<6>[ 2.241455] usbcore: registered new interface driver usb-storage
<6>[ 2.241851] USB Mass Storage support registered.
<6>[ 2.241851] usbcore: registered new interface driver usbserial
<6>[ 2.242279] usbserial: USB Serial Driver core
<6>[ 2.443786] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 2.443786] android_usb gadget: Number of LUNs=1
<6>[ 2.444183] lun0: LUN: removable file: (no medium)
<6>[ 2.444610] android_usb gadget: android_usb ready
<6>[ 2.444793] mousedev: PS/2 mouse device common for all mice
<6>[ 2.445404] input: Melfas MMSxxx Touchscreen as /devices/platform/omap/omap_i2c.3/i2c-3/3-0048/input/input1
<6>[ 2.827209] GPIO Input Driver: Start gpio inputs for tuna-gpio-keypad in interrupt mode
<6>[ 2.827545] GPIO Input Driver: Start gpio inputs for tuna-gpio-keypad in interrupt mode
<6>[ 2.827972] input: tuna-gpio-keypad as /devices/virtual/input/input2
<6>[ 2.828918] input: proximity as /devices/virtual/input/input3
<6>[ 2.829437] input: lightsensor-level as /devices/virtual/input/input4
<6>[ 2.833129] using rtc device, twl_rtc, for alarms
<6>[ 2.833251] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
<6>[ 2.833740] i2c /dev entries driver
<6>[ 2.834564] dmm: probe base: fd300000, irq 145
<6>[ 2.837860] max17040 4-0036: MAX17040 Fuel-Gauge Ver 3
<6>[ 2.840362] OMAP Watchdog Timer Rev 0x01: initial timeout 30 sec
<6>[ 2.843048] device-mapper: uevent: version 1.0.3
<6>[ 2.843627] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
<6>[ 2.843872] Bluetooth: HCI UART driver ver 2.2
<6>[ 2.843994] Bluetooth: HCI H4 protocol initialized
<6>[ 2.844238] cpuidle: using governor ladder
<6>[ 2.844451] cpuidle: using governor menu
<6>[ 2.851409] usbcore: registered new interface driver usbhid
<6>[ 2.851654] usbhid: USB HID core driver
<6>[ 2.852416] logger: created 256K log 'log_main'
<6>[ 2.852722] logger: created 256K log 'log_events'
<6>[ 2.853271] logger: created 256K log 'log_radio'
<6>[ 2.853637] logger: created 256K log 'log_system'
<6>[ 2.854766] OMAP HSI: HSI driver version 0.4.2
<6>[ 2.855041] omap_hsi omap_hsi.0: Registering IRQ mpu_p1 (99)
<6>[ 2.855163] omap_hsi omap_hsi.0: HSI port 1 initialized
<6>[ 2.855346] omap_hsi omap_hsi.0: Registering IRQ mpu_dma (103)
<6>[ 2.855682] omap_hsi omap_hsi.0: HSI Hardware REVISION 0x50043101
<4>[ 2.858001] omap_hsi omap_hsi.0: Cannot set HSI FClk to default value: 96000000. Will retry on next open
<6>[ 2.862884] SDP4430 SoC init
<6>[ 2.893524] asoc: null-codec-dai <-> MultiMedia1 mapping ok
<6>[ 2.894958] asoc: null-codec-dai <-> MultiMedia2 mapping ok
<6>[ 2.896820] asoc: null-codec-dai <-> Voice mapping ok
<6>[ 2.898284] asoc: null-codec-dai <-> Tones mapping ok
<6>[ 2.899749] asoc: null-codec-dai <-> Vibra mapping ok
<6>[ 2.900665] asoc: null-codec-dai <-> MODEM mapping ok
<6>[ 2.901672] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
<6>[ 2.903686] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
<6>[ 2.905181] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok
<6>[ 2.906494] asoc: dit-hifi <-> omap-mcasp-dai.0 mapping ok
<4>[ 2.908782] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Stereo In debugfs file
<6>[ 2.909912] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
<6>[ 2.910827] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
<6>[ 2.911804] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
<6>[ 2.912841] asoc: twl6040-vib <-> mcpdm-vib mapping ok
<6>[ 2.913787] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
<6>[ 2.914855] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
<6>[ 2.915832] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
<6>[ 2.916870] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
<6>[ 2.918792] input: Tuna Headset Jack as /devices/platform/soc-audio/sound/card0/input5
<6>[ 2.921875] asoc: hdmi-audio-codec <-> hdmi-audio-dai mapping ok
<6>[ 2.922515] ALSA device list:
<6>[ 2.922698] #0: TI OMAP4 Board
<6>[ 2.922790] #1: OMAP4HDMI
<6>[ 2.923004] GACT probability NOT on
<6>[ 2.923217] Mirror/redirect action on
<6>[ 2.923309] u32 classifier
<6>[ 2.923400] Actions configured
<6>[ 2.923522] Netfilter messages via NETLINK v0.30.
<6>[ 2.923767] nf_conntrack version 0.5.0 (10094 buckets, 40376 max)
<6>[ 2.925018] ctnetlink v0.93: registering with nfnetlink.
<6>[ 2.925262] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 2.925384] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 2.925903] xt_time: kernel timezone is -0000
<6>[ 2.928466] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 2.928924] arp_tables: (C) 2002 David S. Miller
<6>[ 2.929107] TCP cubic registered
<6>[ 2.930297] NET: Registered protocol family 10
<6>[ 2.936859] Mobile IPv6
<6>[ 2.937011] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 2.937622] IPv6 over IPv4 tunneling driver
<6>[ 2.944396] NET: Registered protocol family 17
<6>[ 2.944519] NET: Registered protocol family 15
<5>[ 2.945007] Bridge firewalling registered
<6>[ 2.945251] Bluetooth: RFCOMM TTY layer initialized
<6>[ 2.945465] Bluetooth: RFCOMM socket layer initialized
<6>[ 2.945556] Bluetooth: RFCOMM ver 1.11
<6>[ 2.945678] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 2.945861] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 2.946105] NET: Registered protocol family 35
<6>[ 2.946655] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<6>[ 2.946899] ThumbEE CPU extension supported.
<5>[ 2.947082] Registering SWP/SWPB emulation handler
<6>[ 2.953338] Reprogramming LPDDR2 timings to 400000000 Hz
<3>[ 2.954315] Power Management for TI OMAP4.
<6>[ 2.955963] OMAP4 PM: Static dependency added between MPUSS and DUCATI <-> L4_PER/CFG and L3_1.
<4>[ 2.956909] sr_init: No PMIC hook to init smartreflex
<6>[ 2.957183] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
<6>[ 2.957489] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
<6>[ 2.957794] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
<6>[ 2.958007] SmartReflex Class3 initialized
<6>[ 2.977111] mmc0: new high speed MMC card at address 0001
<6>[ 2.977630] mmcblk0: mmc0:0001 SEM32G 29.7 GiB
<6>[ 2.977966] mmcblk0boot0: mmc0:0001 SEM32G partition 1 2.00 MiB
<6>[ 2.978179] mmcblk0boot1: mmc0:0001 SEM32G partition 2 2.00 MiB
<6>[ 2.989562] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13
<6>[ 2.997253] mmcblk0boot1: unknown partition table
<6>[ 2.999755] mmcblk0boot0: unknown partition table
<6>[ 3.030120] max17040 4-0036: online = 1 vcell = 4158750 soc = 100 status = 4 health = 1 temp = 310 charger status = 1
<6>[ 3.054382] phone_active_irq_handler : phone_state=0
<6>[ 3.076568] usbcore: registered new interface driver if_usb_driver
<6>[ 3.091125] [MODEM_IF] cdma_ipc0 state changed: OFFLINE
<6>[ 3.091217] phone_active_irq_handler : phone_state=0
<6>[ 3.091613] clock: disabling unused clocks to save power
<6>[ 3.120361] [MODEM_IF] cdma_ipc0 state changed: OFFLINE
<6>[ 3.120544] phone_active_irq_handler : phone_state=0
<6>[ 3.572723] cannot apply mgr(lcd) on inactive device
<4>[ 3.573394] omapfb omapfb: failed to apply dispc config
<6>[ 3.573760] cannot apply mgr(tv) on inactive device
<4>[ 3.574157] omapfb omapfb: failed to apply dispc config
<6>[ 3.574707] cannot apply mgr(lcd2) on inactive device
<4>[ 3.575103] omapfb omapfb: failed to apply dispc config
<6>[ 3.578857] regulator_init_complete: VDAC: disabling
<6>[ 3.579956] regulator_init_complete: VUSB: disabling
<7>[ 3.580505] omaplfb OMAPLFBInitFBDev: Device 0: Requesting 4 TILER 2D framebuffers
<4>[ 3.581054] ## wifi_probe
<4>[ 3.581146] wifi_set_power = 1
<4>[ 3.837646] wifi_set_carddetect = 1
<4>[ 3.850494]
<4>[ 3.850494] Dongle Host Driver, version 5.90.125.87
<4>[ 3.850494] Compiled in drivers/net/wireless/bcmdhd on Nov 11 2011 at 18:34:02
<6>[ 3.971313] mmc1: new high speed SDIO card at address 0001
<4>[ 3.973571] F1 signature read @0x18000000=0x16444330
<4>[ 3.983337] DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 3.984130] wl_create_event_handler thr:59 started
<4>[ 3.984375] dhd_attach thr:5a started
<4>[ 3.984558] dhd_attach thr:5b started
<4>[ 3.984680] dhd_attach thr:5c started
<4>[ 3.984832] wifi_get_mac_addr
<4>[ 3.987854] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
<4>[ 3.987976] wifi_set_power = 0
<4>[ 4.244537] =========== WLAN placed in RESET ========
<6>[ 4.245727] fsa9480 4-0025: cable detect change, from 'unknown/none' to 'usb-peripheral'
<6>[ 4.247497] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:37 UTC (946684837)
<6>[ 4.248260] Freeing init memory: 276K
<6>[ 4.263427] max17040 4-0036: online = 1 vcell = 4176250 soc = 100 status = 4 health = 1 temp = 310 charger status = 1
<3>[ 4.331695] init: Unable to open persistent property directory /data/property errno: 2
<3>[ 4.332641] android_usb: already disabled
<6>[ 4.332916] adb_bind_config
<6>[ 4.373016] mms_ts 3-0048: could not find firmware file 'mms144_ts_rev32.fw'
<6>[ 4.375488] mms_ts 3-0048: Melfas MMS-series touch controller initialized
<3>[ 4.390594] omap-rproc omap-rproc.1: rproc_loader_cont: failed to load ducati-m3.bin
<3>[ 4.419525] HDCP: failed to load keys
<6>[ 4.420227] adb_open
<6>[ 4.569763] s6e8aa: d/b 1, p 1, b-01390ffb
<6>[ 4.569793] s6e8aa: c0, 1, b-00901abe, got v 3363046, factory wants 3356281
<6>[ 4.569824] s6e8aa: c1, 1, b-00f3613f, got v 3609958, factory wants 3600633
<6>[ 4.569854] s6e8aa: c2, 1, b-0073113c, got v 3332675, factory wants 3325664
<6>[ 4.569885] s6e8aa: d/b 1, p 2, b-044d7cf9
<6>[ 4.569915] s6e8aa: c0, 2, b-01f18ead, got v 3229480, factory wants 3220999
<6>[ 4.569946] s6e8aa: c1, 2, b-02592c45, got v 3483052, factory wants 3472918
<6>[ 4.569976] s6e8aa: c2, 2, b-018b18ad, got v 3192021, factory wants 3182705
<6>[ 4.570007] s6e8aa: d/b 1, p 3, b-0b323808
<6>[ 4.570037] s6e8aa: c0, 3, b-051e36fb, got v 3095496, factory wants 3084417
<6>[ 4.570037] s6e8aa: c1, 3, b-05479a9b, got v 3352237, factory wants 3339547
<6>[ 4.570068] s6e8aa: c2, 3, b-041f72cf, got v 3046756, factory wants 3035293
<6>[ 4.570098] s6e8aa: d/b 1, p 4, b-186611f4
<6>[ 4.570129] s6e8aa: c0, 4, b-0b70189a, got v 2953167, factory wants 2939659
<6>[ 4.570159] s6e8aa: c1, 4, b-0bab1f2f, got v 3199367, factory wants 3184831
<6>[ 4.570190] s6e8aa: c2, 4, b-0943de00, got v 2894267, factory wants 2879590
<6>[ 4.570220] s6e8aa: d/b 1, p 5, b-6840e4ff
<6>[ 4.570251] s6e8aa: c0, 5, b-30eece90, got v 2572249, factory wants 2547489
<6>[ 4.570251] s6e8aa: c1, 5, b-325e19b3, got v 2805298, factory wants 2780101
<6>[ 4.570281] s6e8aa: c2, 5, b-2874626c, got v 2485071, factory wants 2459323
<6>[ 4.570312] s6e8aa: d/b 1, p 6, b-ffffffff
<6>[ 4.570343] s6e8aa: c0, 6, b-788cb4ae, got v 2172045, factory wants 2131333
<6>[ 4.570373] s6e8aa: c1, 6, b-7b98ab67, got v 2402902, factory wants 2361333
<6>[ 4.570404] s6e8aa: c2, 6, b-676d589a, got v 2050281, factory wants 2008667
<6>[ 4.789794] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 4.794586] android_work: sent uevent USB_STATE=DISCONNECTED
<3>[ 4.991668] Invalid Device Structure
<6>[ 5.008209] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 5.019927] android_usb gadget: high speed config #1: android
<6>[ 5.020660] android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 5.259674] max17040 4-0036: online = 1 vcell = 4176250 soc = 100 status = 1 health = 1 temp = 310 charger status = 1
<3>[ 5.940093] EXT4-fs (mmcblk0p11): VFS: Can't find ext4 filesystem
<3>[ 6.144470] EXT4-fs (mmcblk0p11): VFS: Can't find ext4 filesystem
<3>[ 6.407592] EXT4-fs (mmcblk0p11): VFS: Can't find ext4 filesystem
<3>[ 6.617645] EXT4-fs (mmcblk0p11): VFS: Can't find ext4 filesystem
<4>[ 52.210693] adbd (109): /proc/109/oom_adj is deprecated, please use /proc/109/oom_score_adj instead.
<6>[ 58.099365] max17040 4-0036: online = 1 vcell = 4212500 soc = 100 status = 1 health = 1 temp = 300 charger status = 1
<6>[ 110.938751] max17040 4-0036: online = 1 vcell = 4212500 soc = 100 status = 1 health = 1 temp = 300 charger status = 1
<6>[ 162.040985] max17040 4-0036: online = 1 vcell = 4212500 soc = 100 status = 1 health = 1 temp = 300 charger status = 1
<6>[ 204.548095] EXT4-fs (mmcblk0p10): recovery complete
<6>[ 204.548217] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts:
<3>[ 206.080169] EXT2-fs (mmcblk0p12): error: couldn't mount because of unsupported optional features (44)
<3>[ 206.140319] EXT4-fs (mmcblk0p12): couldn't mount as ext3 due to feature incompatibilities
<4>[ 206.266510] EXT4-fs (mmcblk0p12): warning: mounting fs with errors, running e2fsck is recommended
<6>[ 206.268463] EXT4-fs (mmcblk0p12): recovery complete
<6>[ 206.269561] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: (null)
<6>[ 214.572540] max17040 4-0036: online = 1 vcell = 4212500 soc = 100 status = 4 health = 1 temp = 300 charger status = 1
<6>[ 267.412170] max17040 4-0036: online = 1 vcell = 4187500 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 320.251586] max17040 4-0036: online = 1 vcell = 4186250 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 373.090911] max17040 4-0036: online = 1 vcell = 4186250 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 423.819976] max17040 4-0036: online = 1 vcell = 4186250 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 476.658996] max17040 4-0036: online = 1 vcell = 4186250 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<5>[ 507.006591] EXT4-fs (mmcblk0p12): error count: 7
<5>[ 507.007110] EXT4-fs (mmcblk0p12): initial error at 1327653712: ext4_ext_insert_index:798: inode 1753252
<5>[ 507.008148] EXT4-fs (mmcblk0p12): last error at 1327770354: ext4_ext_insert_index:798: inode 1753252
<6>[ 529.498565] max17040 4-0036: online = 1 vcell = 4185000 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 580.041107] max17040 4-0036: online = 1 vcell = 4185000 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 632.880706] max17040 4-0036: online = 1 vcell = 4185000 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 685.720092] max17040 4-0036: online = 1 vcell = 4185000 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 736.040863] max17040 4-0036: online = 1 vcell = 4185000 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 788.880187] max17040 4-0036: online = 1 vcell = 4185000 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 839.603698] max17040 4-0036: online = 1 vcell = 4185000 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<2>[ 864.790161] EXT4-fs error (device mmcblk0p10): ext4_mb_generate_buddy:736: group 1, 26150 blocks in bitmap, 26800 in gd
<3>[ 864.790466] Aborting journal on device mmcblk0p10-8.
<2>[ 864.824310] EXT4-fs (mmcblk0p10): Remounting filesystem read-only
<2>[ 864.825378] EXT4-fs error (device mmcblk0p10) in ext4_da_write_end:3254: IO failure
<2>[ 864.842529] EXT4-fs (mmcblk0p10): ext4_da_writepages: jbd2_start: 1952 pages, ino 316; err -30
<6>[ 889.628021] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 940.041107] max17040 4-0036: online = 1 vcell = 4185000 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 992.880706] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 1045.720245] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<2>[ 1054.844543] EXT4-fs error (device mmcblk0p12): ext4_mb_generate_buddy:736: group 3, 7243 blocks in bitmap, 7270 in gd
<3>[ 1054.845336] Aborting journal on device mmcblk0p12-8.
<2>[ 1054.846588] EXT4-fs (mmcblk0p12): Remounting filesystem read-only
<2>[ 1054.848449] EXT4-fs (mmcblk0p12): ext4_da_writepages: jbd2_start: 1024 pages, ino 24586; err -30
<6>[ 1096.041046] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 1148.880371] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 1201.718383] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 1252.041107] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 1304.880767] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 1357.720245] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 1408.041015] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 1460.880279] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 1513.718017] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 1564.041076] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 1616.880615] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 1669.719940] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 1720.041168] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 1772.880737] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<2>[ 1804.741394] EXT4-fs error (device mmcblk0p10): ext4_remount:4325: Abort forced by user
<6>[ 1825.720306] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1
<6>[ 1876.041168] max17040 4-0036: online = 1 vcell = 4183750 soc = 100 status = 4 health = 1 temp = 290 charger status = 1