All pastes #2121215 Raw Edit

Someone

public text v1 · immutable
#2121215 ·published 2012-02-24 06:56 UTC
rendered paste body
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-38-generic (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #83-Ubuntu SMP Wed Jan 4 11:12:07 UTC 2012 (Ubuntu 2.6.32-38.83-generic 2.6.32.52+drm33.21)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-38-generic root=UUID=15b01189-4e83-48be-a98d-5f1cd96ee5ed ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bff90000 (usable)
[    0.000000]  BIOS-e820: 00000000bff90000 - 00000000bff9e000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bffe0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbff90 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 080000000 write-back
[    0.000000]   1 base 080000000 mask 0C0000000 write-back
[    0.000000]   2 base 0C0000000 mask 0F0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009ec00 (usable)
[    0.000000]  modified: 000000000009ec00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000bff90000 (usable)
[    0.000000]  modified: 00000000bff90000 - 00000000bff9e000 (ACPI data)
[    0.000000]  modified: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS)
[    0.000000]  modified: 00000000bffe0000 - 00000000d0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ff700000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000bff90000
[    0.000000] NX (Execute Disable) protection: active
[    0.000000]  0000000000 - 00bfe00000 page 2M
[    0.000000]  00bfe00000 - 00bff90000 page 4k
[    0.000000] kernel direct mapping tables up to bff90000 @ 10000-15000
[    0.000000] RAMDISK: 377f6000 - 37feff53
[    0.000000] ACPI: RSDP 00000000000fb6b0 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 00000000bff90100 0006C (v01 ACRSYS ACRPRDCT 20090810 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000bff90290 000F4 (v03 ACRSYS FACP0847 20090810 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000bff90620 06CAA (v01  963A1 963A1P04 00000004 INTL 20051117)
[    0.000000] ACPI: FACS 00000000bff9e000 00040
[    0.000000] ACPI: APIC 00000000bff90390 00080 (v01 ACRSYS APIC0847 20090810 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000bff90410 0003C (v01 ACRSYS OEMMCFG  20090810 MSFT 00000097)
[    0.000000] ACPI: SLIC 00000000bff90450 00176 (v01 ACRSYS ACRPRDCT 20090810 MSFT 00000097)
[    0.000000] ACPI: WDRT 00000000bff905d0 00047 (v01 ACRSYS NV-WDRT  20090810 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000bff9e040 00079 (v01 ACRSYS OEMB0847 20090810 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bff9a620 00038 (v01 ACRSYS OEMHPET0 20090810 MSFT 00000097)
[    0.000000] ACPI: NVHD 00000000bff9e0c0 00284 (v01 ACRSYS  NVHDCP  20090810 MSFT 00000097)
[    0.000000] ACPI: AWMI 00000000bff9e350 0004E (v01 ACRSYS OEMB0847 20090810 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-00000000bff90000
[    0.000000] Bootmem setup node 0 0000000000000000-00000000bff90000
[    0.000000]   NODE_DATA [0000000000013000 - 0000000000017fff]
[    0.000000]   bootmap [0000000000018000 -  000000000002fff7] pages 18
[    0.000000] (7 early reservations) ==> bootmem [0000000000 - 00bff90000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 0001a35ac4]    TEXT DATA BSS ==> [0001000000 - 0001a35ac4]
[    0.000000]   #3 [00377f6000 - 0037feff53]          RAMDISK ==> [00377f6000 - 0037feff53]
[    0.000000]   #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
[    0.000000]   #5 [0001a36000 - 0001a361dc]              BRK ==> [0001a36000 - 0001a361dc]
[    0.000000]   #6 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000]  [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880002000000-ffff8800049fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00100000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000bff90
[    0.000000] On node 0 totalpages: 786206
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 103 pages reserved
[    0.000000]   DMA zone: 3823 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10695 pages used for memmap
[    0.000000]   DMA32 zone: 771529 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91608 r8192 d23080 u524288
[    0.000000] pcpu-alloc: s91608 r8192 d23080 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 775352
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-38-generic root=UUID=15b01189-4e83-48be-a98d-5f1cd96ee5ed ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3082492k/3145280k available (5436k kernel code, 456k absent, 62332k reserved, 2982k data, 884k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:440
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 31457280 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1599.974 MHz processor.
[    0.010014] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.94 BogoMIPS (lpj=15999740)
[    0.010085] Security Framework initialized
[    0.010135] AppArmor: AppArmor initialized
[    0.011303] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.015162] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.021322] Mount-cache hash table entries: 256
[    0.021691] Initializing cgroup subsys ns
[    0.021705] Initializing cgroup subsys cpuacct
[    0.021717] Initializing cgroup subsys memory
[    0.021735] Initializing cgroup subsys devices
[    0.021742] Initializing cgroup subsys freezer
[    0.021748] Initializing cgroup subsys net_cls
[    0.021802] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.021809] CPU: L2 cache: 512K
[    0.021817] CPU 0/0x0 -> Node 0
[    0.021823] CPU: Physical Processor ID: 0
[    0.021828] CPU: Processor Core ID: 0
[    0.021836] mce: CPU supports 5 MCE banks
[    0.021852] CPU0: Thermal monitoring enabled (TM1)
[    0.021863] using mwait in idle threads.
[    0.021868] Performance Events: Atom events, Intel PMU driver.
[    0.021883] ... version:                3
[    0.021888] ... bit width:              40
[    0.021893] ... generic registers:      2
[    0.021898] ... value mask:             000000ffffffffff
[    0.021903] ... max period:             000000007fffffff
[    0.021908] ... fixed-purpose events:   3
[    0.021913] ... event mask:             0000000700000003
[    0.025534] ACPI: Core revision 20090903
[    0.048499] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.048519] ftrace: allocating 22567 entries in 89 pages
[    0.050167] Setting APIC routing to flat
[    0.050596] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.158251] CPU0: Intel(R) Atom(TM) CPU  330   @ 1.60GHz stepping 02
[    0.160000] Booting processor 1 APIC 0x2 ip 0x6000
[    0.020000] Initializing CPU#1
[    0.020000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.020000] CPU: L2 cache: 512K
[    0.020000] CPU 1/0x2 -> Node 0
[    0.020000] CPU: Physical Processor ID: 0
[    0.020000] CPU: Processor Core ID: 1
[    0.020000] CPU1: Thermal monitoring enabled (TM1)
[    0.310109] CPU1: Intel(R) Atom(TM) CPU  330   @ 1.60GHz stepping 02
[    0.310130] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.320288] Booting processor 2 APIC 0x1 ip 0x6000
[    0.020000] Initializing CPU#2
[    0.020000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.020000] CPU: L2 cache: 512K
[    0.020000] CPU 2/0x1 -> Node 0
[    0.020000] CPU: Physical Processor ID: 0
[    0.020000] CPU: Processor Core ID: 0
[    0.020000] CPU2: Thermal monitoring enabled (TM1)
[    0.480070] CPU2: Intel(R) Atom(TM) CPU  330   @ 1.60GHz stepping 02
[    0.480092] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.490320] Booting processor 3 APIC 0x3 ip 0x6000
[    0.020000] Initializing CPU#3
[    0.020000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.020000] CPU: L2 cache: 512K
[    0.020000] CPU 3/0x3 -> Node 0
[    0.020000] CPU: Physical Processor ID: 0
[    0.020000] CPU: Processor Core ID: 1
[    0.020000] CPU3: Thermal monitoring enabled (TM1)
[    0.650136] CPU3: Intel(R) Atom(TM) CPU  330   @ 1.60GHz stepping 02
[    0.650156] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.660034] Brought up 4 CPUs
[    0.660043] Total of 4 processors activated (12799.88 BogoMIPS).
[    0.662083] CPU0 attaching sched-domain:
[    0.662094]  domain 0: span 0,2 level SIBLING
[    0.662100]   groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
[    0.662113]   domain 1: span 0,2 level MC
[    0.662119]    groups: 0,2 (cpu_power = 1178)
[    0.662129]    domain 2: span 0-3 level CPU
[    0.662135]     groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[    0.662155] CPU1 attaching sched-domain:
[    0.662160]  domain 0: span 1,3 level SIBLING
[    0.662166]   groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
[    0.662178]   domain 1: span 1,3 level MC
[    0.662184]    groups: 1,3 (cpu_power = 1178)
[    0.662193]    domain 2: span 0-3 level CPU
[    0.662199]     groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[    0.662214] CPU2 attaching sched-domain:
[    0.662219]  domain 0: span 0,2 level SIBLING
[    0.662225]   groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
[    0.662238]   domain 1: span 0,2 level MC
[    0.662243]    groups: 0,2 (cpu_power = 1178)
[    0.662253]    domain 2: span 0-3 level CPU
[    0.662258]     groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[    0.662273] CPU3 attaching sched-domain:
[    0.662278]  domain 0: span 1,3 level SIBLING
[    0.662284]   groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
[    0.662297]   domain 1: span 1,3 level MC
[    0.662302]    groups: 1,3 (cpu_power = 1178)
[    0.662312]    domain 2: span 0-3 level CPU
[    0.662317]     groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[    0.662691] devtmpfs: initialized
[    0.662691] regulator: core version 0.5
[    0.662691] Time:  6:43:43  Date: 02/24/12
[    0.662691] NET: Registered protocol family 16
[    0.662691] Trying to unpack rootfs image as initramfs...
[    0.662691] ACPI: bus type pci registered
[    0.662691] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31
[    0.662691] PCI: Not using MMCONFIG.
[    0.662691] PCI: Using configuration type 1 for base access
[    0.662785] bio: create slab <bio-0> at 0
[    0.670667] ACPI: EC: Look up EC in DSDT
[    0.684142] ACPI: Executed 1 blocks of module-level executable AML code
[    0.700879] ACPI: Interpreter enabled
[    0.700888] ACPI: (supports S0 S3 S4 S5)
[    0.700948] ACPI: Using IOAPIC for interrupt routing
[    0.701112] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31
[    0.713912] PCI: MCFG area at fc000000 reserved in ACPI motherboard resources
[    0.715436] PCI: Using MMCONFIG at fc000000 - fdffffff
[    0.752605] ACPI: No dock devices found.
[    0.753808] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.754169] pci 0000:00:03.0: reg 10 io port: [0x4f00-0x4fff]
[    0.754314] pci 0000:00:03.2: reg 10 io port: [0x4900-0x493f]
[    0.754337] pci 0000:00:03.2: reg 20 io port: [0x4d00-0x4d3f]
[    0.754348] pci 0000:00:03.2: reg 24 io port: [0x4e00-0x4e3f]
[    0.754382] pci 0000:00:03.2: PME# supported from D3hot D3cold
[    0.754393] pci 0000:00:03.2: PME# disabled
[    0.754557] pci 0000:00:03.5: reg 10 32bit mmio: [0xfae80000-0xfaefffff]
[    0.754675] pci 0000:00:04.0: reg 10 32bit mmio: [0xfae7f000-0xfae7ffff]
[    0.754722] pci 0000:00:04.0: supports D1 D2
[    0.754727] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.754735] pci 0000:00:04.0: PME# disabled
[    0.754795] pci 0000:00:04.1: reg 10 32bit mmio: [0xfae7ec00-0xfae7ecff]
[    0.754850] pci 0000:00:04.1: supports D1 D2
[    0.754855] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.754863] pci 0000:00:04.1: PME# disabled
[    0.754920] pci 0000:00:08.0: reg 10 32bit mmio: [0xfae78000-0xfae7bfff]
[    0.754973] pci 0000:00:08.0: PME# supported from D3hot D3cold
[    0.754980] pci 0000:00:08.0: PME# disabled
[    0.755075] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfae7d000-0xfae7dfff]
[    0.755086] pci 0000:00:0a.0: reg 14 io port: [0xd080-0xd087]
[    0.755096] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfae7e800-0xfae7e8ff]
[    0.755106] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfae7e400-0xfae7e40f]
[    0.755141] pci 0000:00:0a.0: supports D1 D2
[    0.755147] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.755155] pci 0000:00:0a.0: PME# disabled
[    0.755203] pci 0000:00:0b.0: reg 10 io port: [0xd000-0xd007]
[    0.755213] pci 0000:00:0b.0: reg 14 io port: [0xcc00-0xcc03]
[    0.755223] pci 0000:00:0b.0: reg 18 io port: [0xc880-0xc887]
[    0.755232] pci 0000:00:0b.0: reg 1c io port: [0xc800-0xc803]
[    0.755242] pci 0000:00:0b.0: reg 20 io port: [0xc480-0xc48f]
[    0.755252] pci 0000:00:0b.0: reg 24 32bit mmio: [0xfae76000-0xfae77fff]
[    0.755543] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.755555] pci 0000:00:0c.0: PME# disabled
[    0.755668] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.755676] pci 0000:00:10.0: PME# disabled
[    0.755944] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.755956] pci 0000:00:15.0: PME# disabled
[    0.756259] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.756271] pci 0000:00:16.0: PME# disabled
[    0.756562] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.756574] pci 0000:00:17.0: PME# disabled
[    0.756867] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.756879] pci 0000:00:18.0: PME# disabled
[    0.756993] pci 0000:00:09.0: transparent bridge
[    0.757148] pci 0000:03:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
[    0.757164] pci 0000:03:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[    0.757180] pci 0000:03:00.0: reg 1c 64bit mmio pref: [0xf8000000-0xf9ffffff]
[    0.757191] pci 0000:03:00.0: reg 24 io port: [0xec00-0xec7f]
[    0.757202] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfafe0000-0xfaffffff]
[    0.757288] pci 0000:00:10.0: bridge io port: [0xe000-0xefff]
[    0.757296] pci 0000:00:10.0: bridge 32bit mmio: [0xfaf00000-0xfbffffff]
[    0.757306] pci 0000:00:10.0: bridge 64bit mmio pref: [0xe0000000-0xf9ffffff]
[    0.757475] pci 0000:05:00.0: reg 10 64bit mmio: [0xfebf0000-0xfebfffff]
[    0.757636] pci 0000:00:16.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[    0.757938] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.758435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBB0._PRT]
[    0.758711] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[    0.758892] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
[    0.759149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.759351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.759551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.759751] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.789028] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.789730] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.790458] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.791157] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.791854] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *0, disabled.
[    0.792549] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[    0.793243] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[    0.793939] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[    0.794636] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[    0.795329] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[    0.796026] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[    0.796722] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[    0.797418] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
[    0.798113] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[    0.798810] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[    0.799506] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[    0.800232] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled.
[    0.800927] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[    0.801623] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[    0.802335] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[    0.803045] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *9
[    0.803740] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[    0.804438] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[    0.805137] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[    0.805833] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[    0.806527] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[    0.807222] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[    0.807918] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[    0.808613] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[    0.809308] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[    0.810030] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[    0.810733] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[    0.811442] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *9
[    0.812144] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
[    0.812851] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[    0.813555] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[    0.814271] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *7
[    0.814983] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[    0.815687] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
[    0.816392] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[    0.817202] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.817906] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[    0.818610] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[    0.819324] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
[    0.820069] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[    0.820789] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[    0.821498] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
[    0.822211] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
[    0.822918] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *15
[    0.823630] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *14
[    0.824011] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.824020] vgaarb: loaded
[    0.824326] SCSI subsystem initialized
[    0.824369] libata version 3.00 loaded.
[    0.824369] usbcore: registered new interface driver usbfs
[    0.824369] usbcore: registered new interface driver hub
[    0.824369] usbcore: registered new device driver usb
[    0.824369] ACPI: WMI: Mapper loaded
[    0.824369] PCI: Using ACPI for IRQ routing
[    0.824369] NetLabel: Initializing
[    0.824369] NetLabel:  domain hash size = 128
[    0.824369] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.824369] NetLabel:  unlabeled traffic allowed by default
[    0.824369] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.824369] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[    0.824369] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[    0.840261] Switching to clocksource tsc
[    0.845368] AppArmor: AppArmor Filesystem Enabled
[    0.845422] pnp: PnP ACPI init
[    0.845465] ACPI: bus type pnp registered
[    0.859823] pnp: PnP ACPI: found 10 devices
[    0.859830] ACPI: ACPI bus type pnp unregistered
[    0.859870] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[    0.859878] system 00:04: ioport range 0x800-0x80f has been reserved
[    0.859885] system 00:04: ioport range 0x4000-0x407f has been reserved
[    0.859893] system 00:04: ioport range 0x4080-0x40ff has been reserved
[    0.859900] system 00:04: ioport range 0x4400-0x447f has been reserved
[    0.859908] system 00:04: ioport range 0x4480-0x44ff has been reserved
[    0.859915] system 00:04: ioport range 0x4800-0x487f has been reserved
[    0.859923] system 00:04: ioport range 0x4880-0x48ff has been reserved
[    0.859933] system 00:04: iomem range 0xfefe2000-0xfefe3fff has been reserved
[    0.859941] system 00:04: iomem range 0xfefe1000-0xfefe1fff has been reserved
[    0.859949] system 00:04: iomem range 0xfee01000-0xfeefffff has been reserved
[    0.859968] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.859976] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.859993] system 00:08: iomem range 0xfc000000-0xfdffffff has been reserved
[    0.860010] system 00:09: iomem range 0x0-0x9ffff could not be reserved
[    0.860018] system 00:09: iomem range 0xc0000-0xcffff has been reserved
[    0.860026] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[    0.860034] system 00:09: iomem range 0x100000-0xcfffffff could not be reserved
[    0.860042] system 00:09: iomem range 0xfec00000-0xffffffff could not be reserved
[    0.865276] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[    0.865282] pci 0000:00:09.0:   IO window: disabled
[    0.865291] pci 0000:00:09.0:   MEM window: disabled
[    0.865297] pci 0000:00:09.0:   PREFETCH window: disabled
[    0.865307] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02
[    0.865312] pci 0000:00:0c.0:   IO window: disabled
[    0.865326] pci 0000:00:0c.0:   MEM window: disabled
[    0.865337] pci 0000:00:0c.0:   PREFETCH window: disabled
[    0.865355] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
[    0.865362] pci 0000:00:10.0:   IO window: 0xe000-0xefff
[    0.865371] pci 0000:00:10.0:   MEM window: 0xfaf00000-0xfbffffff
[    0.865379] pci 0000:00:10.0:   PREFETCH window: 0x000000e0000000-0x000000f9ffffff
[    0.865389] pci 0000:00:15.0: PCI bridge, secondary bus 0000:04
[    0.865394] pci 0000:00:15.0:   IO window: disabled
[    0.865408] pci 0000:00:15.0:   MEM window: disabled
[    0.865418] pci 0000:00:15.0:   PREFETCH window: disabled
[    0.865438] pci 0000:00:16.0: PCI bridge, secondary bus 0000:05
[    0.865443] pci 0000:00:16.0:   IO window: disabled
[    0.865458] pci 0000:00:16.0:   MEM window: 0xfeb00000-0xfebfffff
[    0.865469] pci 0000:00:16.0:   PREFETCH window: disabled
[    0.865487] pci 0000:00:17.0: PCI bridge, secondary bus 0000:06
[    0.865492] pci 0000:00:17.0:   IO window: disabled
[    0.865506] pci 0000:00:17.0:   MEM window: disabled
[    0.865516] pci 0000:00:17.0:   PREFETCH window: disabled
[    0.865534] pci 0000:00:18.0: PCI bridge, secondary bus 0000:07
[    0.865539] pci 0000:00:18.0:   IO window: disabled
[    0.865553] pci 0000:00:18.0:   MEM window: disabled
[    0.865564] pci 0000:00:18.0:   PREFETCH window: disabled
[    0.865594] pci 0000:00:09.0: setting latency timer to 64
[    0.866618] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
[    0.866630]   alloc irq_desc for 23 on node -1
[    0.866635]   alloc kstat_irqs on node -1
[    0.866651] pci 0000:00:0c.0: PCI INT A -> Link[LRP0] -> GSI 23 (level, low) -> IRQ 23
[    0.866666] pci 0000:00:0c.0: setting latency timer to 64
[    0.866684] pci 0000:00:10.0: setting latency timer to 64
[    0.867664] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
[    0.867673]   alloc irq_desc for 22 on node -1
[    0.867678]   alloc kstat_irqs on node -1
[    0.867689] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 22 (level, low) -> IRQ 22
[    0.867704] pci 0000:00:15.0: setting latency timer to 64
[    0.868683] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
[    0.868692]   alloc irq_desc for 21 on node -1
[    0.868697]   alloc kstat_irqs on node -1
[    0.868736] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 21 (level, low) -> IRQ 21
[    0.868751] pci 0000:00:16.0: setting latency timer to 64
[    0.869753] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 20
[    0.869762]   alloc irq_desc for 20 on node -1
[    0.869766]   alloc kstat_irqs on node -1
[    0.869778] pci 0000:00:17.0: PCI INT A -> Link[LRP5] -> GSI 20 (level, low) -> IRQ 20
[    0.869792] pci 0000:00:17.0: setting latency timer to 64
[    0.870773] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 23
[    0.870783] pci 0000:00:18.0: PCI INT A -> Link[LRP6] -> GSI 23 (level, low) -> IRQ 23
[    0.870798] pci 0000:00:18.0: setting latency timer to 64
[    0.870810] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.870817] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.870824] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
[    0.870831] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.870839] pci_bus 0000:03: resource 0 io:  [0xe000-0xefff]
[    0.870845] pci_bus 0000:03: resource 1 mem: [0xfaf00000-0xfbffffff]
[    0.870852] pci_bus 0000:03: resource 2 pref mem [0xe0000000-0xf9ffffff]
[    0.870859] pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff]
[    0.870966] NET: Registered protocol family 2
[    0.871400] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.875031] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.882087] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.882934] TCP: Hash tables configured (established 524288 bind 65536)
[    0.882942] TCP reno registered
[    0.883242] NET: Registered protocol family 1
[    0.988998] pci 0000:03:00.0: Boot video device
[    0.989830] Scanning for low memory corruption every 60 seconds
[    0.990175] audit: initializing netlink socket (disabled)
[    0.990202] type=2000 audit(1330065822.988:1): initialized
[    1.007200] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.011249] VFS: Disk quotas dquot_6.5.2
[    1.011419] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.013245] fuse init (API version 7.13)
[    1.013498] msgmni has been set to 6020
[    1.014301] alg: No test for stdrng (krng)
[    1.014507] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.014516] io scheduler noop registered
[    1.014521] io scheduler anticipatory registered
[    1.014526] io scheduler deadline registered
[    1.014696] io scheduler cfq registered (default)
[    1.015181]   alloc irq_desc for 24 on node -1
[    1.015187]   alloc kstat_irqs on node -1
[    1.015219] pcieport 0000:00:0c.0: irq 24 for MSI/MSI-X
[    1.015246] pcieport 0000:00:0c.0: setting latency timer to 64
[    1.015703]   alloc irq_desc for 25 on node -1
[    1.015708]   alloc kstat_irqs on node -1
[    1.015734] pcieport 0000:00:15.0: irq 25 for MSI/MSI-X
[    1.015759] pcieport 0000:00:15.0: setting latency timer to 64
[    1.016182]   alloc irq_desc for 26 on node -1
[    1.016187]   alloc kstat_irqs on node -1
[    1.016213] pcieport 0000:00:16.0: irq 26 for MSI/MSI-X
[    1.016239] pcieport 0000:00:16.0: setting latency timer to 64
[    1.016669]   alloc irq_desc for 27 on node -1
[    1.016674]   alloc kstat_irqs on node -1
[    1.016699] pcieport 0000:00:17.0: irq 27 for MSI/MSI-X
[    1.016725] pcieport 0000:00:17.0: setting latency timer to 64
[    1.017147]   alloc irq_desc for 28 on node -1
[    1.017153]   alloc kstat_irqs on node -1
[    1.017178] pcieport 0000:00:18.0: irq 28 for MSI/MSI-X
[    1.017204] pcieport 0000:00:18.0: setting latency timer to 64
[    1.017432] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.017497] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.017771] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.017782] ACPI: Power Button [PWRB]
[    1.017918] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.017926] ACPI: Power Button [PWRF]
[    1.020277] processor LNXCPU:00: registered as cooling_device0
[    1.021653] processor LNXCPU:01: registered as cooling_device1
[    1.023011] processor LNXCPU:02: registered as cooling_device2
[    1.024350] processor LNXCPU:03: registered as cooling_device3
[    1.038901] thermal LNXTHERM:01: registered as thermal_zone0
[    1.038932] ACPI: Thermal Zone [THRM] (65 C)
[    1.043674] Linux agpgart interface v0.103
[    1.043788] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.047275] brd: module loaded
[    1.048672] loop: module loaded
[    1.048937] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    1.050128] Fixed MDIO Bus: probed
[    1.050227] PPP generic driver version 2.4.2
[    1.050351] tun: Universal TUN/TAP device driver, 1.6
[    1.050356] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.050608] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.051696] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.051708] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[    1.051749] ehci_hcd 0000:00:04.1: setting latency timer to 64
[    1.051756] ehci_hcd 0000:00:04.1: EHCI Host Controller
[    1.051889] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[    1.051947] ehci_hcd 0000:00:04.1: debug port 1
[    1.051962] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[    1.052008] ehci_hcd 0000:00:04.1: irq 22, io mem 0xfae7ec00
[    1.070050] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    1.070298] usb usb1: configuration #1 chosen from 1 choice
[    1.070379] hub 1-0:1.0: USB hub found
[    1.070405] hub 1-0:1.0: 12 ports detected
[    1.070588] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.071648] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
[    1.071660] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
[    1.071708] ohci_hcd 0000:00:04.0: setting latency timer to 64
[    1.071715] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    1.071839] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[    1.071894] ohci_hcd 0000:00:04.0: irq 21, io mem 0xfae7f000
[    1.104160] Freeing initrd memory: 8167k freed
[    1.132244] usb usb2: configuration #1 chosen from 1 choice
[    1.132322] hub 2-0:1.0: USB hub found
[    1.132344] hub 2-0:1.0: 12 ports detected
[    1.132508] uhci_hcd: USB Universal Host Controller Interface driver
[    1.132703] PNP: No PS/2 controller found. Probing ports directly.
[    1.134177] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.134197] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.134513] mice: PS/2 mouse device common for all mice
[    1.134799] rtc_cmos 00:06: RTC can wake from S4
[    1.134923] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.135003] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.135354] device-mapper: uevent: version 1.0.3
[    1.135711] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.136166] device-mapper: multipath: version 1.1.0 loaded
[    1.136175] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.137090] cpuidle: using governor ladder
[    1.137096] cpuidle: using governor menu
[    1.137949] TCP cubic registered
[    1.138378] NET: Registered protocol family 10
[    1.140231] NET: Registered protocol family 17
[    1.140657] PM: Resume from disk failed.
[    1.140700] registered taskstats version 1
[    1.141580]   Magic number: 0:98:722
[    1.141601] block loop2: hash matches
[    1.141785] rtc_cmos 00:06: setting system clock to 2012-02-24 06:43:44 UTC (1330065824)
[    1.141794] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.141798] EDD information not available.
[    1.142003] Freeing unused kernel memory: 884k freed
[    1.142571] Write protecting the kernel read-only data: 7716k
[    1.188865] udev: starting version 151
[    1.375440] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.376937] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[    1.376955] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[    1.376972] forcedeth 0000:00:0a.0: setting latency timer to 64
[    1.463459] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:01:6c:6d:08:95
[    1.463470] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
[    1.463532] ahci 0000:00:0b.0: version 3.0
[    1.464939] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    1.464955] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[    1.465042]   alloc irq_desc for 29 on node -1
[    1.465047]   alloc kstat_irqs on node -1
[    1.465067] ahci 0000:00:0b.0: irq 29 for MSI/MSI-X
[    1.465186] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.465195] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part sxs 
[    1.465204] ahci 0000:00:0b.0: setting latency timer to 64
[    1.466016] scsi0 : ahci
[    1.466445] scsi1 : ahci
[    1.466720] scsi2 : ahci
[    1.466976] scsi3 : ahci
[    1.467227] scsi4 : ahci
[    1.467487] scsi5 : ahci
[    1.468081] ata1: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76100 irq 29
[    1.468091] ata2: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76180 irq 29
[    1.468098] ata3: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76200 irq 29
[    1.468105] ata4: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76280 irq 29
[    1.468112] ata5: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76300 irq 29
[    1.468119] ata6: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76380 irq 29
[    1.670037] usb 2-1: new low speed USB device using ohci_hcd and address 2
[    1.810034] ata1: SATA link down (SStatus 0 SControl 300)
[    1.810058] ata3: SATA link down (SStatus 0 SControl 300)
[    1.820037] ata4: SATA link down (SStatus 0 SControl 300)
[    1.821284] ata5: SATA link down (SStatus 0 SControl 300)
[    1.821323] ata6: SATA link down (SStatus 0 SControl 300)
[    1.898297] usb 2-1: configuration #1 chosen from 1 choice
[    1.929873] usbcore: registered new interface driver hiddev
[    1.936589] input: Chicony 2.4G Multimedia Wireless Kit as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.0/input/input3
[    1.936905] generic-usb 0003:04F2:0918.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony 2.4G Multimedia Wireless Kit] on usb-0000:00:04.0-1/input0
[    1.950609] input: Chicony 2.4G Multimedia Wireless Kit as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.1/input/input4
[    1.951308] generic-usb 0003:04F2:0918.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Chicony 2.4G Multimedia Wireless Kit] on usb-0000:00:04.0-1/input1
[    1.951420] usbcore: registered new interface driver usbhid
[    1.951434] usbhid: v2.6:USB HID core driver
[    2.000048] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.001301] ata2.00: ATA-8: WDC WD5000BEVT-22ZAT0, 01.01A01, max UDMA/133
[    2.001309] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.002712] ata2.00: configured for UDMA/133
[    2.002995] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000BEVT-2 01.0 PQ: 0 ANSI: 5
[    2.003546] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.003616] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    2.003784] sd 1:0:0:0: [sda] Write Protect is off
[    2.003792] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.003931] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.004545]  sda: sda1 sda2 < sda5 > sda3
[    2.050126] sd 1:0:0:0: [sda] Attached SCSI disk
[    7.502952] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   12.937030] udev: starting version 151
[   13.032308] ACPI: resource nForce2_smbus [0x4d00-0x4d3f] conflicts with ACPI region IP2_ [0x4d00-0x4d04]
[   13.032320] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.032331] nForce2_smbus 0000:00:03.2: Error probing SMB1.
[   13.032419] ACPI: resource nForce2_smbus [0x4e00-0x4e3f] conflicts with ACPI region SM00 [0x4e00-0x4e3f]
[   13.032429] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.032439] nForce2_smbus 0000:00:03.2: Error probing SMB2.
[   13.067184] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.107802] lp: driver loaded but no devices found
[   13.466896] [drm] Initialized drm 1.1.0 20060810
[   13.592407] acer-wmi: Acer Laptop ACPI-WMI Extras
[   13.592438] acer-wmi: No or unsupported WMI interface, unable to load
[   13.594156] cfg80211: Calling CRDA to update world regulatory domain
[   13.638008] type=1505 audit(1330065836.988:2):  operation="profile_load" pid=611 name="/sbin/dhclient3"
[   13.638877] type=1505 audit(1330065836.988:3):  operation="profile_load" pid=611 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   13.639390] type=1505 audit(1330065836.988:4):  operation="profile_load" pid=611 name="/usr/lib/connman/scripts/dhclient-script"
[   13.643998] cfg80211: World regulatory domain updated:
[   13.644011] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.644022] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.644031] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.644040] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.644048] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.644057] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.715544] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 19
[   13.715570]   alloc irq_desc for 19 on node -1
[   13.715580]   alloc kstat_irqs on node -1
[   13.715609] ath5k 0000:05:00.0: PCI INT A -> Link[LN4A] -> GSI 19 (level, low) -> IRQ 19
[   13.715637] ath5k 0000:05:00.0: setting latency timer to 64
[   13.715775] ath5k 0000:05:00.0: registered as 'phy0'
[   13.816778] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 22
[   13.816796] nouveau 0000:03:00.0: PCI INT A -> Link[SGRU] -> GSI 22 (level, low) -> IRQ 22
[   13.816812] nouveau 0000:03:00.0: setting latency timer to 64
[   13.832565] [drm] nouveau 0000:03:00.0: failed to evaluate _DSM: 5
[   13.880945] [drm] nouveau 0000:03:00.0: Detected an NV50 generation card (0x0ace80b1)
[   13.882914] [drm] nouveau 0000:03:00.0: Attempting to load BIOS image from PRAMIN
[   13.959855] [drm] nouveau 0000:03:00.0: ... appears to be valid
[   13.959868] [drm] nouveau 0000:03:00.0: BIT BIOS found
[   13.959877] [drm] nouveau 0000:03:00.0: Bios version 62.79.6c.00
[   13.959889] [drm] nouveau 0000:03:00.0: TMDS table revision 2.0 not currently supported
[   13.959898] [drm] nouveau 0000:03:00.0: Found Display Configuration Block version 4.0
[   13.959909] [drm] nouveau 0000:03:00.0: DCB connector table: VHER 0x40 5 16 4
[   13.959918] [drm] nouveau 0000:03:00.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
[   13.959928] [drm] nouveau 0000:03:00.0:   1: 0x00002161: type 0x61 idx 1 tag 0x08
[   13.959937] [drm] nouveau 0000:03:00.0: Raw DCB entry 0: 02021332 00020010
[   13.959947] [drm] nouveau 0000:03:00.0: Raw DCB entry 1: 02000300 0000001e
[   13.959955] [drm] nouveau 0000:03:00.0: Raw DCB entry 2: 0000000e 00000000
[   13.969314] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 0 at offset 0xE294
[   14.092689] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 1 at offset 0xE56C
[   14.092700] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 2 at offset 0xE56E
[   14.092720] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 3 at offset 0xE62F
[   14.092741] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 4 at offset 0xE6F4
[   14.092750] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table at offset 0xE759
[   14.122592] [drm] nouveau 0000:03:00.0: 0xE759: Condition still not met after 20ms, skipping following opcodes
[   14.122616] [drm] nouveau 0000:03:00.0: 0xCB2E: parsing output script 0
[   14.224400] ath: EEPROM regdomain: 0x65
[   14.224407] ath: EEPROM indicates we should expect a direct regpair map
[   14.224417] ath: Country alpha2 being used: 00
[   14.224422] ath: Regpair used: 0x65
[   14.240925] [TTM] Zone  kernel: Available graphics memory: 1545772 kiB.
[   14.240962] [drm] nouveau 0000:03:00.0: 256 MiB VRAM
[   14.282063] [drm] nouveau 0000:03:00.0: 512 MiB GART (aperture)
[   14.289995] [drm] nouveau 0000:03:00.0: Allocating FIFO number 1
[   14.298076] [drm] nouveau 0000:03:00.0: nouveau_channel_alloc: initialised FIFO 1
[   14.300218] [drm] nouveau 0000:03:00.0: Detected a TMDS output
[   14.300235] [drm] nouveau 0000:03:00.0: Detected a DAC output
[   14.300247] [drm] nouveau 0000:03:00.0: Detected a DVI-D connector
[   14.300721] [drm] nouveau 0000:03:00.0: Detected a VGA connector
[   14.349314] type=1505 audit(1330065837.698:5):  operation="profile_replace" pid=780 name="/sbin/dhclient3"
[   14.350132] type=1505 audit(1330065837.708:6):  operation="profile_replace" pid=780 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   14.350659] type=1505 audit(1330065837.708:7):  operation="profile_replace" pid=780 name="/usr/lib/connman/scripts/dhclient-script"
[   14.358915] type=1505 audit(1330065837.708:8):  operation="profile_load" pid=779 name="/usr/share/gdm/guest-session/Xsession"
[   14.368176] type=1505 audit(1330065837.718:9):  operation="profile_load" pid=787 name="/usr/sbin/tcpdump"
[   14.374408] type=1505 audit(1330065837.728:10):  operation="profile_load" pid=781 name="/usr/bin/evince"
[   14.383573] type=1505 audit(1330065837.738:11):  operation="profile_load" pid=781 name="/usr/bin/evince-previewer"
[   14.385366] [drm] nouveau 0000:03:00.0: allocated 1024x768 fb: 0x40250000, bo ffff8800bb5d5c00
[   14.385665] fb0: nouveaufb frame buffer device
[   14.385673] registered panic notifier
[   14.385692] [drm] Initialized nouveau 0.0.15 20090420 for 0000:03:00.0 on minor 0
[   14.394783] vga16fb: initializing
[   14.394797] vga16fb: mapped to 0xffff8800000a0000
[   14.394810] vga16fb: not registering due to another framebuffer present
[   14.413983] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[   14.414141] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[   14.415716] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[   14.415738] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[   14.415754] hda_intel: Disable MSI for Nvidia chipset
[   14.415840] HDA Intel 0000:00:08.0: setting latency timer to 64
[   14.442068] phy0: Selected rate control algorithm 'minstrel'
[   14.444654] Registered led device: ath5k-phy0::rx
[   14.444732] Registered led device: ath5k-phy0::tx
[   14.444743] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   14.444951] Console: switching to colour frame buffer device 128x48
[   14.445290] [drm] nouveau 0000:03:00.0: 0x1195: parsing clock script 0
[   14.575811] ADDRCONF(NETDEV_UP): wlan0: link is not ready