Copyright (c) 2003, 2004, 2005, 2006 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 1.6.2-RELEASE #0: Sun Oct 15 16:45:36 EDT 2006
root@dfly.home.local:/usr/src/sys/compile/GENERIC
TSC clock: 860885071 Hz, i8254 clock: 1193188 Hz
CPU: Intel Pentium III (860.89-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 67108864 (65536K bytes)
avail memory = 55586816 (54284K bytes)
Changing APIC ID for IO APIC #0 from 0 to 2 on chip
Changing APIC ID for IO APIC #1 from 0 to 3 on chip
Programming 16 pins in IOAPIC #0
Programming 16 pins in IOAPIC #1
DragonFly/MP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "/kernel.old" at 0xc074e000.
Preloaded elf module "/modules/acpi.ko" at 0xc074e1ec.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fc320
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using MMX optimized bcopy/copyin/copyout
acpi0: <DELL PE2400> on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
compare 0
legacypci0 on motherboard
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=0962)> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xfc00-0xfcff mem 0xfcfff000-0xfcffffff irq 11 at device 6.0 on pci1
aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs
aac0: <Dell PERC 2/Si> mem 0xf4000000-0xf7ffffff irq 2 at device 2.1 on pci0
aac0: i960RX 100MHz, 54MB cache memory, no battery support
aac0: Kernel 2.8-0, Build 6089, S/N 3801d0
aac0: Supported Options=2558<DATA64,HOSTTIME,WINDOW4GB,SOFTERR,SGMAP64>
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xecc0-0xecff mem 0xfe000000-0xfe0fffff,0xfe101000-0xfe101fff irq 10 at device 8.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: MAC address: 00:b0:d0:ab:3e:8c
pci0: <ATI model 4759 graphics accelerator> at 14.0
isab0: <ServerWorks IB6566 PCI to ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
pcib2: <ServerWorks NB6635 3.0LE host to PCI bridge> on legacypci0
pci2: <PCI bus> on pcib2
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8800-0xcc7ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
SMP: AP CPU #1 Launched!
Warning: ACPI idle hook not yet supported for SMP
Waiting 5 seconds for SCSI devices to settle
aacd0: <RAID 0 (Stripe)> on aac0
aacd0: 17354MB (35542272 sectors)
sa0 at ahc0 bus 0 target 6 lun 0
sa0: <ARCHIVE Python 06408-XXX 8130> Removable Sequential Access SCSI-3 device
sa0: 20.000MB/s transfers (20.000MHz, offset 15)
Mounting root from ufs:/dev/aacd0s2a
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:466 1.06> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present