rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.2.1-gentoo-r2 (root@alex-thinks) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #6 SMP Mon Feb 20 17:39:11 CST 2012
[ 0.000000] Command line: root=/dev/sda4 rootfstype=ext4 BOOT_IMAGE=/boot/vmlinuz-3.2.1-gentoo-r2
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c6e7a000 (usable)
[ 0.000000] BIOS-e820: 00000000c6e7a000 - 00000000c728a000 (reserved)
[ 0.000000] BIOS-e820: 00000000c728a000 - 00000000c730a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c730a000 - 00000000c736a000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c736a000 - 00000000c7d80000 (usable)
[ 0.000000] BIOS-e820: 00000000c7d80000 - 00000000c8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed81000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000019f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: LENOVO 0596CTO/0596CTO, BIOS 8FET31WW (1.15 ) 08/25/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x19f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0FFF90000 mask FFFFF0000 uncachable
[ 0.000000] 4 base 0FED80000 mask FFFFFF000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] TOM2: 000000019f000000 aka 6640M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xc7d80 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7d80000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7c00000 page 2M
[ 0.000000] 00c7c00000 - 00c7d80000 page 4k
[ 0.000000] kernel direct mapping tables up to c7d80000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000019f000000
[ 0.000000] 0100000000 - 0180000000 page 1G
[ 0.000000] 0180000000 - 019f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 19f000000 @ c7d7e000-c7d80000
[ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000c7369120 00074 (v01 LENOVO TP-8F 00000003 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000c7357000 000F4 (v04 LENOVO TP-8F 00001150 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000c7359000 0EBCE (v01 LENOVO TP-8F 00001000 PTEC 00001150)
[ 0.000000] ACPI: FACS 00000000c72f5000 00040
[ 0.000000] ACPI: SLIC 00000000c7368000 00176 (v01 LENOVO TP-8F 00001150 PTEC 00000001)
[ 0.000000] ACPI: HPET 00000000c7356000 00038 (v01 LENOVO TP-8F 00001150 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000c7355000 0005E (v02 LENOVO TP-8F 00001150 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000c7354000 0003C (v01 LENOVO TP-8F 00001150 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c7353000 0003E (v01 LENOVO TP-8F 00001150 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c7352000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000c7351000 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000c734f000 012FA (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: UEFI 00000000c734e000 0012A (v01 LENOVO TP-8F 00001150 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880198c00000-ffff88019e5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0019f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000c6e7a
[ 0.000000] 0: 0x000c736a -> 0x000c7d80
[ 0.000000] 0: 0x00100000 -> 0x0019f000
[ 0.000000] On node 0 totalpages: 1468445
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 796880 pages, LIFO batch:31
[ 0.000000] Normal zone: 10176 pages used for memmap
[ 0.000000] Normal zone: 641088 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c6e7a000 - 00000000c728a000
[ 0.000000] PM: Registered nosave memory: 00000000c728a000 - 00000000c730a000
[ 0.000000] PM: Registered nosave memory: 00000000c730a000 - 00000000c736a000
[ 0.000000] PM: Registered nosave memory: 00000000c7d80000 - 00000000c8000000
[ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
[ 0.000000] PM: Registered nosave memory: 00000000fed81000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:36c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88019ec00000 s76288 r8192 d22016 u1048576
[ 0.000000] pcpu-alloc: s76288 r8192 d22016 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1441880
[ 0.000000] Kernel command line: root=/dev/sda4 rootfstype=ext4 BOOT_IMAGE=/boot/vmlinuz-3.2.1-gentoo-r2
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 5695092k/6799360k available (3321k kernel code, 925580k absent, 178688k reserved, 3156k data, 452k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.736 MHz processor.
[ 0.001006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.47 BogoMIPS (lpj=1596736)
[ 0.001233] pid_max: default: 32768 minimum: 301
[ 0.001419] Mount-cache hash table entries: 256
[ 0.002125] Initializing cgroup subsys cpuacct
[ 0.002291] Initializing cgroup subsys freezer
[ 0.002450] tseg: 00c7d80000
[ 0.002454] CPU: Physical Processor ID: 0
[ 0.002612] CPU: Processor Core ID: 0
[ 0.002770] mce: CPU supports 6 MCE banks
[ 0.003803] ACPI: Core revision 20110623
[ 0.018379] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028437] CPU0: AMD E-350 Processor stepping 00
[ 0.028998] Performance Events: AMD PMU driver.
[ 0.028998] ... version: 0
[ 0.028998] ... bit width: 48
[ 0.028998] ... generic registers: 4
[ 0.028998] ... value mask: 0000ffffffffffff
[ 0.028998] ... max period: 00007fffffffffff
[ 0.028998] ... fixed-purpose events: 0
[ 0.029002] ... event mask: 000000000000000f
[ 0.029425] MCE: In-kernel MCE decoding enabled.
[ 0.029803] Booting Node 0, Processors #1 Ok.
[ 0.030161] smpboot cpu 1: start_ip = 98000
[ 0.102007] Brought up 2 CPUs
[ 0.102188] Total of 2 processors activated (6386.40 BogoMIPS).
[ 0.103313] PM: Registering ACPI NVS region at c728a000 (524288 bytes)
[ 0.104207] RTC time: 17:40:00, date: 02/20/12
[ 0.104388] NET: Registered protocol family 16
[ 0.104581] kworker/u:0 used greatest stack depth: 5680 bytes left
[ 0.105121] Extended Config Space enabled on 0 nodes
[ 0.105339] ACPI: bus type pci registered
[ 0.106156] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000)
[ 0.106434] PCI: not using MMCONFIG
[ 0.106602] PCI: Using configuration type 1 for base access
[ 0.107004] PCI: Using configuration type 1 for extended access
[ 0.118182] bio: create slab <bio-0> at 0
[ 0.119054] ACPI: Added _OSI(Module Device)
[ 0.119276] ACPI: Added _OSI(Processor Device)
[ 0.119411] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.119578] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.123016] ACPI: EC: Look up EC in DSDT
[ 0.134935] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.143303] ACPI: Interpreter enabled
[ 0.143443] ACPI: (supports S0 S3 S4 S5)
[ 0.143802] ACPI: Using IOAPIC for interrupt routing
[ 0.144331] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000)
[ 0.145212] PCI: MMCONFIG at [mem 0xf8000000-0xf9ffffff] reserved in ACPI motherboard resources
[ 0.176242] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.177241] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.178820] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.181379] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.181633] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c1fff]
[ 0.181884] pci_root PNP0A08:00: host bridge window [mem 0x000c2000-0x000c3fff]
[ 0.181986] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c5fff]
[ 0.182221] pci_root PNP0A08:00: host bridge window [mem 0x000c6000-0x000c7fff]
[ 0.182471] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000c9fff]
[ 0.182719] pci_root PNP0A08:00: host bridge window [mem 0x000ca000-0x000cbfff]
[ 0.182985] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cdfff]
[ 0.183172] pci_root PNP0A08:00: host bridge window [mem 0x000ce000-0x000cffff]
[ 0.183361] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d1fff]
[ 0.183596] pci_root PNP0A08:00: host bridge window [mem 0x000d2000-0x000d3fff]
[ 0.183832] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff]
[ 0.183985] pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff]
[ 0.184191] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff]
[ 0.184424] pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff]
[ 0.184655] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff]
[ 0.186985] pci_root PNP0A08:00: host bridge window [mem 0x000de000-0x000dffff]
[ 0.187216] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e1fff]
[ 0.187984] pci_root PNP0A08:00: host bridge window [mem 0x000e2000-0x000e3fff]
[ 0.188168] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e5fff]
[ 0.188353] pci_root PNP0A08:00: host bridge window [mem 0x000e6000-0x000e7fff]
[ 0.188586] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000e9fff]
[ 0.188818] pci_root PNP0A08:00: host bridge window [mem 0x000ea000-0x000ebfff]
[ 0.188984] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000edfff]
[ 0.189187] pci_root PNP0A08:00: host bridge window [mem 0x000ee000-0x000effff]
[ 0.189421] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff]
[ 0.189656] pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xffffffff]
[ 0.189984] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.190148] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.190293] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000ce000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce1ff])
[ 0.190554] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
[ 0.190615] pci 0000:00:01.0: [1002:9802] type 0 class 0x000300
[ 0.190631] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.190642] pci 0000:00:01.0: reg 14: [io 0x4000-0x40ff]
[ 0.190653] pci 0000:00:01.0: reg 18: [mem 0xf0200000-0xf023ffff]
[ 0.190701] pci 0000:00:01.0: supports D1 D2
[ 0.190728] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
[ 0.190741] pci 0000:00:01.1: reg 10: [mem 0xf0244000-0xf0247fff]
[ 0.190800] pci 0000:00:01.1: supports D1 D2
[ 0.191000] pci 0000:00:06.0: [1022:1514] type 1 class 0x000604
[ 0.191059] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.191067] pci 0000:00:06.0: PME# disabled
[ 0.191162] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.191189] pci 0000:00:11.0: reg 10: [io 0x4118-0x411f]
[ 0.191203] pci 0000:00:11.0: reg 14: [io 0x4124-0x4127]
[ 0.191217] pci 0000:00:11.0: reg 18: [io 0x4110-0x4117]
[ 0.191231] pci 0000:00:11.0: reg 1c: [io 0x4120-0x4123]
[ 0.191245] pci 0000:00:11.0: reg 20: [io 0x4100-0x410f]
[ 0.191259] pci 0000:00:11.0: reg 24: [mem 0xf024a000-0xf024a3ff]
[ 0.191324] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.191343] pci 0000:00:12.0: reg 10: [mem 0xf0249000-0xf0249fff]
[ 0.191439] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.191466] pci 0000:00:12.2: reg 10: [mem 0xf024a500-0xf024a5ff]
[ 0.191558] pci 0000:00:12.2: supports D1 D2
[ 0.191562] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.191568] pci 0000:00:12.2: PME# disabled
[ 0.191600] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.191619] pci 0000:00:13.0: reg 10: [mem 0xf0248000-0xf0248fff]
[ 0.191713] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.191739] pci 0000:00:13.2: reg 10: [mem 0xf024a400-0xf024a4ff]
[ 0.191830] pci 0000:00:13.2: supports D1 D2
[ 0.191834] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.191840] pci 0000:00:13.2: PME# disabled
[ 0.191872] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.191976] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.192010] pci 0000:00:14.2: reg 10: [mem 0xf0240000-0xf0243fff 64bit]
[ 0.192086] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.192093] pci 0000:00:14.2: PME# disabled
[ 0.192113] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.192212] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.192281] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.192359] pci 0000:00:15.0: supports D1 D2
[ 0.192399] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
[ 0.192479] pci 0000:00:15.1: supports D1 D2
[ 0.192524] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[ 0.192573] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[ 0.192618] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[ 0.192665] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[ 0.192719] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[ 0.192764] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[ 0.192808] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[ 0.192856] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[ 0.193033] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[ 0.193053] pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.193084] pci 0000:01:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.193105] pci 0000:01:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.193120] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.193165] pci 0000:01:00.0: supports D1 D2
[ 0.193169] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193176] pci 0000:01:00.0: PME# disabled
[ 0.195017] pci 0000:00:06.0: PCI bridge to [bus 01-01]
[ 0.195176] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff]
[ 0.195186] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.195267] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.195448] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.195453] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c1fff] (subtractive decode)
[ 0.195459] pci 0000:00:14.4: bridge window [mem 0x000c2000-0x000c3fff] (subtractive decode)
[ 0.195464] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c5fff] (subtractive decode)
[ 0.195469] pci 0000:00:14.4: bridge window [mem 0x000c6000-0x000c7fff] (subtractive decode)
[ 0.195474] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000c9fff] (subtractive decode)
[ 0.195479] pci 0000:00:14.4: bridge window [mem 0x000ca000-0x000cbfff] (subtractive decode)
[ 0.195484] pci 0000:00:14.4: bridge window [mem 0x000cc000-0x000cdfff] (subtractive decode)
[ 0.195489] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode)
[ 0.195494] pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode)
[ 0.195499] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
[ 0.195503] pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
[ 0.195508] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
[ 0.195513] pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
[ 0.195518] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
[ 0.195523] pci 0000:00:14.4: bridge window [mem 0x000de000-0x000dffff] (subtractive decode)
[ 0.195528] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e1fff] (subtractive decode)
[ 0.195533] pci 0000:00:14.4: bridge window [mem 0x000e2000-0x000e3fff] (subtractive decode)
[ 0.195538] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e5fff] (subtractive decode)
[ 0.195543] pci 0000:00:14.4: bridge window [mem 0x000e6000-0x000e7fff] (subtractive decode)
[ 0.195548] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000e9fff] (subtractive decode)
[ 0.195553] pci 0000:00:14.4: bridge window [mem 0x000ea000-0x000ebfff] (subtractive decode)
[ 0.195558] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000edfff] (subtractive decode)
[ 0.195563] pci 0000:00:14.4: bridge window [mem 0x000ee000-0x000effff] (subtractive decode)
[ 0.195568] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[ 0.195573] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xffffffff] (subtractive decode)
[ 0.195578] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.195583] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.195703] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.195996] pci 0000:04:00.0: [10ec:8176] type 0 class 0x000280
[ 0.196024] pci 0000:04:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.196069] pci 0000:04:00.0: reg 18: [mem 0xf0100000-0xf0103fff 64bit]
[ 0.196171] pci 0000:04:00.0: supports D1 D2
[ 0.196175] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196183] pci 0000:04:00.0: PME# disabled
[ 0.198062] pci 0000:00:15.1: PCI bridge to [bus 04-04]
[ 0.198263] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff]
[ 0.198271] pci 0000:00:15.1: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.198310] pci_bus 0000:00: on NUMA node 0
[ 0.198328] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.198693] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.198883] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.199028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT]
[ 0.199118] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB1._PRT]
[ 0.199453] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.200098] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.215139] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0
[ 0.215677] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0
[ 0.216328] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0
[ 0.216860] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0
[ 0.217330] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
[ 0.217813] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0
[ 0.218222] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0
[ 0.218702] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0
[ 0.219306] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.219306] vgaarb: loaded
[ 0.219447] vgaarb: bridge control possible 0000:00:01.0
[ 0.220300] SCSI subsystem initialized
[ 0.221068] libata version 3.00 loaded.
[ 0.222009] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.222011] PCI: Using ACPI for IRQ routing
[ 0.223461] PCI: pci_cache_line_size set to 64 bytes
[ 0.223698] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.223703] reserve RAM buffer: 00000000c6e7a000 - 00000000c7ffffff
[ 0.223709] reserve RAM buffer: 00000000c7d80000 - 00000000c7ffffff
[ 0.223713] reserve RAM buffer: 000000019f000000 - 000000019fffffff
[ 0.224226] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.224379] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.227004] Switching to clocksource hpet
[ 0.244862] pnp: PnP ACPI init
[ 0.245069] ACPI: bus type pnp registered
[ 0.246433] pnp 00:00: [bus 00-ff]
[ 0.246439] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.246444] pnp 00:00: [mem 0x000c0000-0x000c1fff window]
[ 0.246449] pnp 00:00: [mem 0x000c2000-0x000c3fff window]
[ 0.246453] pnp 00:00: [mem 0x000c4000-0x000c5fff window]
[ 0.246458] pnp 00:00: [mem 0x000c6000-0x000c7fff window]
[ 0.246462] pnp 00:00: [mem 0x000c8000-0x000c9fff window]
[ 0.246467] pnp 00:00: [mem 0x000ca000-0x000cbfff window]
[ 0.246471] pnp 00:00: [mem 0x000cc000-0x000cdfff window]
[ 0.246475] pnp 00:00: [mem 0x000ce000-0x000cffff window]
[ 0.246479] pnp 00:00: [mem 0x000d0000-0x000d1fff window]
[ 0.246484] pnp 00:00: [mem 0x000d2000-0x000d3fff window]
[ 0.246488] pnp 00:00: [mem 0x000d4000-0x000d5fff window]
[ 0.246492] pnp 00:00: [mem 0x000d6000-0x000d7fff window]
[ 0.246496] pnp 00:00: [mem 0x000d8000-0x000d9fff window]
[ 0.246501] pnp 00:00: [mem 0x000da000-0x000dbfff window]
[ 0.246505] pnp 00:00: [mem 0x000dc000-0x000ddfff window]
[ 0.246509] pnp 00:00: [mem 0x000de000-0x000dffff window]
[ 0.246513] pnp 00:00: [mem 0x000e0000-0x000e1fff window]
[ 0.246518] pnp 00:00: [mem 0x000e2000-0x000e3fff window]
[ 0.246522] pnp 00:00: [mem 0x000e4000-0x000e5fff window]
[ 0.246526] pnp 00:00: [mem 0x000e6000-0x000e7fff window]
[ 0.246530] pnp 00:00: [mem 0x000e8000-0x000e9fff window]
[ 0.246534] pnp 00:00: [mem 0x000ea000-0x000ebfff window]
[ 0.246539] pnp 00:00: [mem 0x000ec000-0x000edfff window]
[ 0.246543] pnp 00:00: [mem 0x000ee000-0x000effff window]
[ 0.246547] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[ 0.246552] pnp 00:00: [mem 0xf8000000-0xffffffff window]
[ 0.246559] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.246563] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.246567] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.247039] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.247196] pnp 00:01: [io 0x0f50-0x0f51]
[ 0.247202] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.247207] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.247211] pnp 00:01: [mem 0xf8000000-0xf9ffffff]
[ 0.247454] system 00:01: [io 0x0f50-0x0f51] has been reserved
[ 0.247636] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.247807] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.247981] system 00:01: [mem 0xf8000000-0xf9ffffff] has been reserved
[ 0.248149] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.248908] pnp 00:02: [io 0x0000-0x001f]
[ 0.248913] pnp 00:02: [io 0x0081-0x008f]
[ 0.248917] pnp 00:02: [io 0x00c0-0x00de]
[ 0.248921] pnp 00:02: [io 0x040b]
[ 0.248924] pnp 00:02: [io 0x04d6]
[ 0.248928] pnp 00:02: [dma 4]
[ 0.249156] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.249177] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.249196] pnp 00:03: [irq 13]
[ 0.249441] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.249464] pnp 00:04: [io 0x0070-0x0071]
[ 0.249475] pnp 00:04: [irq 8]
[ 0.249670] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.249690] pnp 00:05: [io 0x0061]
[ 0.249876] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.249903] pnp 00:06: [io 0x0060]
[ 0.249907] pnp 00:06: [io 0x0064]
[ 0.249964] pnp 00:06: [irq 1]
[ 0.250361] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.250514] pnp 00:07: [irq 12]
[ 0.250809] pnp 00:07: Plug and Play ACPI device, IDs LEN0017 PNP0f13 (active)
[ 0.250842] pnp 00:08: [io 0x0022-0x0023]
[ 0.250846] pnp 00:08: [io 0x002e-0x002f]
[ 0.250851] pnp 00:08: [io 0x0072-0x0073]
[ 0.250854] pnp 00:08: [io 0x0080]
[ 0.250858] pnp 00:08: [io 0x0092]
[ 0.250861] pnp 00:08: [io 0x00b0-0x00b1]
[ 0.250865] pnp 00:08: [io 0x00b2]
[ 0.250868] pnp 00:08: [io 0x00b8]
[ 0.250872] pnp 00:08: [io 0x00bc]
[ 0.250875] pnp 00:08: [io 0x00f0]
[ 0.250879] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.250882] pnp 00:08: [io 0x0530-0x0537]
[ 0.250886] pnp 00:08: [io 0x0800-0x0827]
[ 0.250890] pnp 00:08: [io 0x0830]
[ 0.250893] pnp 00:08: [io 0x0840-0x0847]
[ 0.250897] pnp 00:08: [io 0x0b00-0x0b1f]
[ 0.250900] pnp 00:08: [io 0x0b20-0x0b3f]
[ 0.250904] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.250907] pnp 00:08: [io 0x0c14]
[ 0.250911] pnp 00:08: [io 0x0c50-0x0c52]
[ 0.250918] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.250921] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.250925] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.250928] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.250932] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.250936] pnp 00:08: [io 0x0cf9]
[ 0.250940] pnp 00:08: [io 0x8100-0x81ff window]
[ 0.250944] pnp 00:08: [io 0x8200-0x82ff window]
[ 0.251269] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.251447] system 00:08: [io 0x0530-0x0537] has been reserved
[ 0.251615] system 00:08: [io 0x0800-0x0827] has been reserved
[ 0.251784] system 00:08: [io 0x0830] has been reserved
[ 0.251952] system 00:08: [io 0x0840-0x0847] has been reserved
[ 0.252178] system 00:08: [io 0x0b00-0x0b1f] has been reserved
[ 0.252353] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.252523] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.252692] system 00:08: [io 0x0c14] has been reserved
[ 0.252861] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.253035] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.253149] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.253311] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.253471] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.253632] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.253792] system 00:08: [io 0x0cf9] could not be reserved
[ 0.253951] system 00:08: [io 0x8100-0x81ff window] has been reserved
[ 0.254124] system 00:08: [io 0x8200-0x82ff window] has been reserved
[ 0.254257] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.254452] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.254457] pnp 00:09: [mem 0xffe00000-0xffffffff]
[ 0.254462] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.254466] pnp 00:09: [mem 0xfec10000-0xfec1001f]
[ 0.254470] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.254474] pnp 00:09: [mem 0xfed61000-0xfed613ff]
[ 0.254478] pnp 00:09: [mem 0xfed80000-0xfed80fff]
[ 0.254769] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.254932] system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.255110] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.255242] system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.255358] system 00:09: [mem 0xfed61000-0xfed613ff] has been reserved
[ 0.255521] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.255685] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.257156] pnp: PnP ACPI: found 10 devices
[ 0.257343] ACPI: ACPI bus type pnp unregistered
[ 0.262958] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.263275] PCI: max bus depth: 1 pci_try_num: 2
[ 0.263340] pci 0000:00:06.0: BAR 14: assigned [mem 0xf0300000-0xf03fffff]
[ 0.263531] pci 0000:00:15.1: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.263783] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0020000-0xf003ffff pref]
[ 0.264048] pci 0000:00:06.0: PCI bridge to [bus 01-01]
[ 0.264218] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff]
[ 0.264354] pci 0000:00:06.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.264527] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.264768] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[ 0.264940] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.265082] pci 0000:00:15.1: PCI bridge to [bus 04-04]
[ 0.265242] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff]
[ 0.265361] pci 0000:00:15.1: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.265528] pci 0000:00:15.1: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.265799] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.265967] pci 0000:00:06.0: setting latency timer to 64
[ 0.265992] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.266143] pci 0000:00:15.0: setting latency timer to 64
[ 0.266154] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.266319] pci 0000:00:15.1: setting latency timer to 64
[ 0.266326] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.266331] pci_bus 0000:00: resource 5 [mem 0x000c0000-0x000c1fff]
[ 0.266335] pci_bus 0000:00: resource 6 [mem 0x000c2000-0x000c3fff]
[ 0.266340] pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c5fff]
[ 0.266344] pci_bus 0000:00: resource 8 [mem 0x000c6000-0x000c7fff]
[ 0.266348] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000c9fff]
[ 0.266353] pci_bus 0000:00: resource 10 [mem 0x000ca000-0x000cbfff]
[ 0.266357] pci_bus 0000:00: resource 11 [mem 0x000cc000-0x000cdfff]
[ 0.266362] pci_bus 0000:00: resource 12 [mem 0x000d0000-0x000d1fff]
[ 0.266366] pci_bus 0000:00: resource 13 [mem 0x000d2000-0x000d3fff]
[ 0.266370] pci_bus 0000:00: resource 14 [mem 0x000d4000-0x000d5fff]
[ 0.266374] pci_bus 0000:00: resource 15 [mem 0x000d6000-0x000d7fff]
[ 0.266379] pci_bus 0000:00: resource 16 [mem 0x000d8000-0x000d9fff]
[ 0.266383] pci_bus 0000:00: resource 17 [mem 0x000da000-0x000dbfff]
[ 0.266387] pci_bus 0000:00: resource 18 [mem 0x000dc000-0x000ddfff]
[ 0.266392] pci_bus 0000:00: resource 19 [mem 0x000de000-0x000dffff]
[ 0.266396] pci_bus 0000:00: resource 20 [mem 0x000e0000-0x000e1fff]
[ 0.266400] pci_bus 0000:00: resource 21 [mem 0x000e2000-0x000e3fff]
[ 0.266405] pci_bus 0000:00: resource 22 [mem 0x000e4000-0x000e5fff]
[ 0.266409] pci_bus 0000:00: resource 23 [mem 0x000e6000-0x000e7fff]
[ 0.266414] pci_bus 0000:00: resource 24 [mem 0x000e8000-0x000e9fff]
[ 0.266418] pci_bus 0000:00: resource 25 [mem 0x000ea000-0x000ebfff]
[ 0.266422] pci_bus 0000:00: resource 26 [mem 0x000ec000-0x000edfff]
[ 0.266427] pci_bus 0000:00: resource 27 [mem 0x000ee000-0x000effff]
[ 0.266431] pci_bus 0000:00: resource 28 [mem 0xe0000000-0xf7ffffff]
[ 0.266436] pci_bus 0000:00: resource 29 [mem 0xf8000000-0xffffffff]
[ 0.266440] pci_bus 0000:00: resource 30 [io 0x0000-0x0cf7]
[ 0.266444] pci_bus 0000:00: resource 31 [io 0x0d00-0xffff]
[ 0.266449] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.266453] pci_bus 0000:01: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.266458] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.266463] pci_bus 0000:02: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.266467] pci_bus 0000:02: resource 5 [mem 0x000c0000-0x000c1fff]
[ 0.266471] pci_bus 0000:02: resource 6 [mem 0x000c2000-0x000c3fff]
[ 0.266476] pci_bus 0000:02: resource 7 [mem 0x000c4000-0x000c5fff]
[ 0.266480] pci_bus 0000:02: resource 8 [mem 0x000c6000-0x000c7fff]
[ 0.266484] pci_bus 0000:02: resource 9 [mem 0x000c8000-0x000c9fff]
[ 0.266489] pci_bus 0000:02: resource 10 [mem 0x000ca000-0x000cbfff]
[ 0.266493] pci_bus 0000:02: resource 11 [mem 0x000cc000-0x000cdfff]
[ 0.266497] pci_bus 0000:02: resource 12 [mem 0x000d0000-0x000d1fff]
[ 0.266501] pci_bus 0000:02: resource 13 [mem 0x000d2000-0x000d3fff]
[ 0.266506] pci_bus 0000:02: resource 14 [mem 0x000d4000-0x000d5fff]
[ 0.266510] pci_bus 0000:02: resource 15 [mem 0x000d6000-0x000d7fff]
[ 0.266514] pci_bus 0000:02: resource 16 [mem 0x000d8000-0x000d9fff]
[ 0.266519] pci_bus 0000:02: resource 17 [mem 0x000da000-0x000dbfff]
[ 0.266523] pci_bus 0000:02: resource 18 [mem 0x000dc000-0x000ddfff]
[ 0.266527] pci_bus 0000:02: resource 19 [mem 0x000de000-0x000dffff]
[ 0.266532] pci_bus 0000:02: resource 20 [mem 0x000e0000-0x000e1fff]
[ 0.266536] pci_bus 0000:02: resource 21 [mem 0x000e2000-0x000e3fff]
[ 0.266540] pci_bus 0000:02: resource 22 [mem 0x000e4000-0x000e5fff]
[ 0.266545] pci_bus 0000:02: resource 23 [mem 0x000e6000-0x000e7fff]
[ 0.266549] pci_bus 0000:02: resource 24 [mem 0x000e8000-0x000e9fff]
[ 0.266553] pci_bus 0000:02: resource 25 [mem 0x000ea000-0x000ebfff]
[ 0.266558] pci_bus 0000:02: resource 26 [mem 0x000ec000-0x000edfff]
[ 0.266562] pci_bus 0000:02: resource 27 [mem 0x000ee000-0x000effff]
[ 0.266567] pci_bus 0000:02: resource 28 [mem 0xe0000000-0xf7ffffff]
[ 0.266571] pci_bus 0000:02: resource 29 [mem 0xf8000000-0xffffffff]
[ 0.266575] pci_bus 0000:02: resource 30 [io 0x0000-0x0cf7]
[ 0.266580] pci_bus 0000:02: resource 31 [io 0x0d00-0xffff]
[ 0.266584] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.266589] pci_bus 0000:04: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.266593] pci_bus 0000:04: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.266666] NET: Registered protocol family 2
[ 0.266980] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.268901] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.272216] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.273125] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.273338] TCP reno registered
[ 0.273514] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.273780] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.274239] pci 0000:00:01.0: Boot video device
[ 0.398533] PCI: CLS 32 bytes, default 64
[ 0.398650] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.398875] Placing 64MB software IO TLB between ffff8800c2e7a000 - ffff8800c6e7a000
[ 0.399136] software IO TLB at phys 0xc2e7a000 - 0xc6e7a000
[ 0.401505] perf: AMD IBS detected (0x000000ff)
[ 0.403864] audit: initializing netlink socket (disabled)
[ 0.404189] type=2000 audit(1329759599.403:1): initialized
[ 0.453460] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.520858] VFS: Disk quotas dquot_6.5.2
[ 0.521387] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.523692] msgmni has been set to 11123
[ 0.525038] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.525301] io scheduler noop registered
[ 0.525470] io scheduler deadline registered
[ 0.525956] io scheduler cfq registered (default)
[ 0.526518] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.526588] pcieport 0000:00:06.0: irq 40 for MSI/MSI-X
[ 0.526894] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.526966] pcieport 0000:00:15.0: irq 41 for MSI/MSI-X
[ 0.527364] pcieport 0000:00:15.1: setting latency timer to 64
[ 0.527434] pcieport 0000:00:15.1: irq 42 for MSI/MSI-X
[ 0.527953] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 0.528177] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.528353] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[ 0.528387] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 0.528562] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 0.528597] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[ 0.528771] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.528945] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[ 0.529365] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.530382] Non-volatile memory driver v1.3
[ 0.532816] ACPI: AC Adapter [ACAD] (off-line)
[ 0.533430] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.533691] ACPI: Power Button [PWRB]
[ 0.534109] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.534363] ACPI: Sleep Button [SLPB]
[ 0.534788] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.535664] ACPI: Lid Switch [LID]
[ 0.536340] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.536592] ACPI: Power Button [PWRF]
[ 0.537253] ACPI: acpi_idle registered with cpuidle
[ 0.544109] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.544338] ACPI: Thermal Zone [THZ0] (77 C)
[ 0.545802] ahci 0000:00:11.0: version 3.0
[ 0.545893] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.546243] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 0.546547] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio ccc
[ 0.548061] scsi0 : ahci
[ 0.549147] ata1: SATA max UDMA/133 abar m1024@0xf024a000 port 0xf024a100 irq 19
[ 0.549767] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.550095] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.550383] r8169 0000:01:00.0: setting latency timer to 64
[ 0.550473] r8169 0000:01:00.0: irq 43 for MSI/MSI-X
[ 0.551463] r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xffffc90000036000, 60:eb:69:d9:6d:f3, XID 083000c0 IRQ 43
[ 0.551787] r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.552517] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.567805] i8042: Detected active multiplexing controller, rev 1.1
[ 0.580296] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.580496] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.580755] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.581094] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.581327] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.582044] mousedev: PS/2 mouse device common for all mice
[ 0.583341] rtc_cmos 00:04: RTC can wake from S4
[ 0.583810] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.584065] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.585322] cpuidle: using governor ladder
[ 0.586818] cpuidle: using governor menu
[ 0.590375] EFI Variables Facility v0.08 2004-May-17
[ 0.592336] snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.592725] snd_hda_intel 0000:00:01.1: irq 44 for MSI/MSI-X
[ 0.592764] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[ 0.598099] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 0.598854] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
[ 0.600292] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.601705] ACPI: Battery Slot [BAT1] (battery present)
[ 0.618037] ALSA device list:
[ 0.618214] #0: HD-Audio Generic at 0xf0244000 irq 44
[ 0.618380] #1: HDA ATI SB at 0xf0240000 irq 16
[ 0.618808] TCP cubic registered
[ 0.619728] PM: Checking hibernation image partition /dev/sda6
[ 0.621438] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.009147] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.021296] ata1.00: ATA-8: OCZ-VERTEX3, 2.15, max UDMA/133
[ 1.021489] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.031432] ata1.00: configured for UDMA/133
[ 1.032226] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.15 PQ: 0 ANSI: 5
[ 1.033792] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.034702] sd 0:0:0:0: [sda] Write Protect is off
[ 1.034884] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.034962] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.036653] sda: sda1 sda2 sda3 sda4
[ 1.038519] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.038722] PM: Hibernation image partition 8:6 present
[ 1.038727] PM: Looking for hibernation image.
[ 1.038764] PM: Image not found (code -6)
[ 1.038768] PM: Hibernation image not present or could not be loaded.
[ 1.038796] registered taskstats version 1
[ 1.065667] Magic number: 0:414:694
[ 1.077068] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 1.077355] VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
[ 1.079700] Freeing unused kernel memory: 452k freed
[ 1.080192] Write protecting the kernel read-only data: 6144k
[ 1.087705] Freeing unused kernel memory: 760k freed
[ 1.095484] Freeing unused kernel memory: 744k freed
[ 1.172753] cat used greatest stack depth: 4816 bytes left
[ 1.203318] init-early.sh used greatest stack depth: 4344 bytes left
[ 1.400087] Refined TSC clocksource calibration: 1596.599 MHz.
[ 1.400277] Switching to clocksource tsc
[ 1.608310] NET: Registered protocol family 1
[ 1.645657] udevd[769]: starting version 171
[ 1.758503] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 1.758509] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 1.758513] thinkpad_acpi: ThinkPad BIOS 8FET31WW (1.15 ), EC unknown
[ 1.758517] thinkpad_acpi: Lenovo ThinkPad X120e, model 0596CTO
[ 1.766489] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 1.766855] thinkpad_acpi: radio switch found; radios are enabled
[ 1.766872] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 1.787859] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 1.788933] Registered led device: tpacpi::power
[ 1.788971] Registered led device: tpacpi::standby
[ 1.789048] Registered led device: tpacpi::thinkvantage
[ 1.792375] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 1.830243] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 1.833952] [drm] Initialized drm 1.1.0 20060810
[ 1.834640] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 1.839149] usbcore: registered new interface driver usbfs
[ 1.839177] usbcore: registered new interface driver hub
[ 1.844496] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.859237] usbcore: registered new device driver usb
[ 1.865430] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.865438] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
[ 1.865554] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.865654] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.865671] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.865696] ehci_hcd 0000:00:12.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
[ 1.865703] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
[ 1.865711] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.865762] QUIRK: Enable AMD PLL fix
[ 1.865780] ehci_hcd 0000:00:12.2: debug port 1
[ 1.865790] ehci_hcd 0000:00:12.2: reset command 0080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
[ 1.865802] ehci_hcd 0000:00:12.2: MWI active
[ 1.865806] ehci_hcd 0000:00:12.2: supports USB remote wakeup
[ 1.865843] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf024a500
[ 1.865851] ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.865862] ehci_hcd 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 1.871186] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.871270] usb usb1: default language 0x0409
[ 1.871284] usb usb1: udev 1, busnum 1, minor = 0
[ 1.871289] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.871294] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.871298] usb usb1: Product: EHCI Host Controller
[ 1.871302] usb usb1: Manufacturer: Linux 3.2.1-gentoo-r2 ehci_hcd
[ 1.871306] usb usb1: SerialNumber: 0000:00:12.2
[ 1.871440] usb usb1: usb_probe_device
[ 1.871447] usb usb1: configuration #1 chosen from 1 choice
[ 1.871466] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.871517] hub 1-0:1.0: usb_probe_interface
[ 1.871522] hub 1-0:1.0: usb_probe_interface - got id
[ 1.871528] hub 1-0:1.0: USB hub found
[ 1.871538] hub 1-0:1.0: 5 ports detected
[ 1.871542] hub 1-0:1.0: standalone hub
[ 1.871545] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.871549] hub 1-0:1.0: individual port over-current protection
[ 1.871554] hub 1-0:1.0: power on to power good time: 20ms
[ 1.871562] hub 1-0:1.0: local power source is good
[ 1.871566] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.871821] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.871933] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.871948] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.871962] ehci_hcd 0000:00:13.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
[ 1.871969] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
[ 1.871976] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.872091] ehci_hcd 0000:00:13.2: debug port 1
[ 1.872100] ehci_hcd 0000:00:13.2: reset command 0080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
[ 1.872112] ehci_hcd 0000:00:13.2: MWI active
[ 1.872116] ehci_hcd 0000:00:13.2: supports USB remote wakeup
[ 1.872134] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf024a400
[ 1.872143] ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.872153] ehci_hcd 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 1.876091] cfg80211: Calling CRDA to update world regulatory domain
[ 1.878498] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.878575] usb usb2: default language 0x0409
[ 1.878589] usb usb2: udev 1, busnum 2, minor = 128
[ 1.878594] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.878599] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.878603] usb usb2: Product: EHCI Host Controller
[ 1.878607] usb usb2: Manufacturer: Linux 3.2.1-gentoo-r2 ehci_hcd
[ 1.878611] usb usb2: SerialNumber: 0000:00:13.2
[ 1.878739] usb usb2: usb_probe_device
[ 1.878745] usb usb2: configuration #1 chosen from 1 choice
[ 1.878764] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1.878818] hub 2-0:1.0: usb_probe_interface
[ 1.878822] hub 2-0:1.0: usb_probe_interface - got id
[ 1.878828] hub 2-0:1.0: USB hub found
[ 1.878839] hub 2-0:1.0: 5 ports detected
[ 1.878843] hub 2-0:1.0: standalone hub
[ 1.878846] hub 2-0:1.0: no power switching (usb 1.0)
[ 1.878850] hub 2-0:1.0: individual port over-current protection
[ 1.878855] hub 2-0:1.0: power on to power good time: 20ms
[ 1.878863] hub 2-0:1.0: local power source is good
[ 1.878867] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 1.922168] [drm] radeon defaulting to kernel modesetting.
[ 1.922174] [drm] radeon kernel modesetting enabled.
[ 1.922241] radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.922250] radeon 0000:00:01.0: setting latency timer to 64
[ 1.922508] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x17AA:0x21DF).
[ 1.922630] [drm] register mmio base: 0xF0200000
[ 1.922633] [drm] register mmio size: 262144
[ 1.922875] ATOM BIOS: Lenovo
[ 1.922924] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 1.922930] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
[ 1.934969] rtl8192ce 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.934985] rtl8192ce 0000:04:00.0: setting latency timer to 64
[ 1.951825] [drm] Detected VRAM RAM=384M, BAR=256M
[ 1.951829] [drm] RAM width 32bits DDR
[ 1.954309] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.954316] ohci_hcd: block sizes: ed 80 td 96
[ 1.958955] [TTM] Zone kernel: Available graphics memory: 2848524 kiB.
[ 1.958962] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 1.958966] [TTM] Initializing pool allocator.
[ 1.959058] [drm] radeon: 384M of VRAM memory ready
[ 1.959063] [drm] radeon: 512M of GTT memory ready.
[ 1.959090] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.959094] [drm] Driver supports precise vblank timestamp query.
[ 1.959155] radeon 0000:00:01.0: irq 45 for MSI/MSI-X
[ 1.959164] radeon 0000:00:01.0: radeon: using MSI.
[ 1.959216] [drm] radeon: irq initialized.
[ 1.959226] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.961555] [drm] Loading PALM Microcode
[ 1.971160] ehci_hcd 0000:00:12.2: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 1.971171] hub 1-0:1.0: port 4: status 0501 change 0001
[ 1.978145] ehci_hcd 0000:00:13.2: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 1.978155] hub 2-0:1.0: port 2: status 0501 change 0001
[ 1.978173] ehci_hcd 0000:00:13.2: GetStatus port:5 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 1.978180] hub 2-0:1.0: port 5: status 0501 change 0001
[ 2.021476] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 2.022046] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 2.022054] rtlwifi: wireless switch is on
[ 2.023798] radeon 0000:00:01.0: WB enabled
[ 2.040723] [drm] ring test succeeded in 1 usecs
[ 2.040925] [drm] radeon: ib pool ready.
[ 2.041074] [drm] ib test succeeded in 0 usecs
[ 2.042882] [drm] Radeon Display Connectors
[ 2.042887] [drm] Connector 0:
[ 2.042890] [drm] LVDS
[ 2.042893] [drm] HPD1
[ 2.042898] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 2.042901] [drm] Encoders:
[ 2.042904] [drm] LCD1: INTERNAL_UNIPHY
[ 2.042907] [drm] Connector 1:
[ 2.042910] [drm] HDMI-A
[ 2.042912] [drm] HPD2
[ 2.042916] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 2.042919] [drm] Encoders:
[ 2.042922] [drm] DFP1: INTERNAL_UNIPHY
[ 2.042925] [drm] Connector 2:
[ 2.042927] [drm] VGA
[ 2.042931] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 2.042934] [drm] Encoders:
[ 2.042937] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.043066] [drm] Internal thermal controller without fan control
[ 2.043229] [drm] radeon: power management initialized
[ 2.071086] hub 1-0:1.0: state 7 ports 5 chg 0010 evt 0000
[ 2.071168] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[ 2.122106] ehci_hcd 0000:00:12.2: port 4 full speed --> companion
[ 2.122129] ehci_hcd 0000:00:12.2: GetStatus port:4 status 003801 0 ACK POWER OWNER sig=j CONNECT
[ 2.122185] hub 1-0:1.0: port 4 not reset yet, waiting 50ms
[ 2.173215] ehci_hcd 0000:00:12.2: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC
[ 2.173259] hub 2-0:1.0: state 7 ports 5 chg 0024 evt 0000
[ 2.173271] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 2.224416] ehci_hcd 0000:00:13.2: port 2 high speed
[ 2.224429] ehci_hcd 0000:00:13.2: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.275221] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[ 2.328376] ehci_hcd 0000:00:13.2: port 2 high speed
[ 2.328389] ehci_hcd 0000:00:13.2: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.399498] usb 2-2: default language 0x0409
[ 2.404008] usb 2-2: udev 2, busnum 2, minor = 129
[ 2.404034] usb 2-2: New USB device found, idVendor=0bda, idProduct=0158
[ 2.404045] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.404054] usb 2-2: Product: USB2.0-CRW
[ 2.404061] usb 2-2: Manufacturer: Generic
[ 2.404068] usb 2-2: SerialNumber: 20071114173400000
[ 2.404259] usb 2-2: usb_probe_device
[ 2.404266] usb 2-2: configuration #1 chosen from 1 choice
[ 2.406126] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
[ 2.409181] hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
[ 2.417535] uas 2-2:1.0: usb_probe_interface
[ 2.417544] uas 2-2:1.0: usb_probe_interface - got id
[ 2.417893] usbcore: registered new interface driver uas
[ 2.420126] libusual 2-2:1.0: usb_probe_interface
[ 2.420163] libusual 2-2:1.0: usb_probe_interface - got id
[ 2.420530] usbcore: registered new interface driver libusual
[ 2.422740] Initializing USB Mass Storage driver...
[ 2.422786] usb-storage 2-2:1.0: usb_probe_interface
[ 2.422797] usb-storage 2-2:1.0: usb_probe_interface - got id
[ 2.422840] usbcore: registered new interface driver usb-storage
[ 2.422844] USB Mass Storage support registered.
[ 2.424126] ums-realtek 2-2:1.0: usb_probe_interface
[ 2.424134] ums-realtek 2-2:1.0: usb_probe_interface - got id
[ 2.436844] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 1
[ 2.437087] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 2
[ 2.437336] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 3
[ 2.437585] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 4
[ 2.437833] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 5
[ 2.438084] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 6
[ 2.438335] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 7
[ 2.438584] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 8
[ 2.438833] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 9
[ 2.439085] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 10
[ 2.439334] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 11
[ 2.439584] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 12
[ 2.439832] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 13
[ 2.440084] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 14
[ 2.440387] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 15
[ 2.440712] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 16
[ 2.440958] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 17
[ 2.441210] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 18
[ 2.441459] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 19
[ 2.441709] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 20
[ 2.441959] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 21
[ 2.442209] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 22
[ 2.442461] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 23
[ 2.442710] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 24
[ 2.442959] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 25
[ 2.443209] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 26
[ 2.443459] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 27
[ 2.443709] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 28
[ 2.444014] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 29
[ 2.444211] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 30
[ 2.444461] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 31
[ 2.444710] ehci_hcd 0000:00:13.2: devpath 2 ep2in 3strikes
[ 2.444801] scsi1 : usb-storage 2-2:1.0
[ 2.445192] usbcore: registered new interface driver ums-realtek
[ 2.460113] ehci_hcd 0000:00:13.2: port 5 high speed
[ 2.460124] ehci_hcd 0000:00:13.2: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.492989] [drm] fb mappable at 0xE0142000
[ 2.492996] [drm] vram apper at 0xE0000000
[ 2.492999] [drm] size 4325376
[ 2.493008] [drm] fb depth is 24
[ 2.493011] [drm] pitch is 5632
[ 2.493125] fbcon: radeondrmfb (fb0) is primary device
[ 2.511163] usb 2-5: new high-speed USB device number 3 using ehci_hcd
[ 2.565198] ehci_hcd 0000:00:13.2: port 5 high speed
[ 2.565209] ehci_hcd 0000:00:13.2: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.631984] usb 2-5: skipped 1 descriptor after configuration
[ 2.631997] usb 2-5: skipped 5 descriptors after interface
[ 2.632037] usb 2-5: skipped 1 descriptor after endpoint
[ 2.632046] usb 2-5: skipped 10 descriptors after interface
[ 2.632591] usb 2-5: default language 0x0409
[ 2.633850] usb 2-5: udev 3, busnum 2, minor = 130
[ 2.633862] usb 2-5: New USB device found, idVendor=04f2, idProduct=b1b4
[ 2.633871] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=2
[ 2.633878] usb 2-5: Product: Integrated Camera
[ 2.633885] usb 2-5: Manufacturer: Image Processor
[ 2.633891] usb 2-5: SerialNumber: Integrated Camera
[ 2.634078] usb 2-5: usb_probe_device
[ 2.634085] usb 2-5: configuration #1 chosen from 1 choice
[ 2.634665] usb 2-5: adding 2-5:1.0 (config #1, interface 0)
[ 2.634774] usb 2-5: adding 2-5:1.1 (config #1, interface 1)
[ 2.634877] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0010
[ 2.634948] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0004
[ 2.634960] ehci_hcd 0000:00:13.2: GetStatus port:2 status 001002 0 ACK POWER sig=se0 CSC
[ 2.634971] hub 2-0:1.0: port 2, status 0100, change 0001, 12 Mb/s
[ 2.634976] usb 2-2: USB disconnect, device number 2
[ 2.634980] usb 2-2: unregistering device
[ 2.634984] usb 2-2: unregistering interface 2-2:1.0
[ 2.635650] usb 2-2: usb_disable_device nuking all URBs
[ 2.647955] Linux video capture interface: v2.00
[ 2.651121] uvcvideo 2-5:1.0: usb_probe_interface
[ 2.651129] uvcvideo 2-5:1.0: usb_probe_interface - got id
[ 2.651433] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b1b4)
[ 2.653148] usbcore: registered new interface driver uvcvideo
[ 2.653151] USB Video Class driver (1.1.1)
[ 2.656056] usb 2-5: link qh512-0001/ffff88019810a500 start 1 [1/0 us]
[ 2.656178] usb 2-5: unlink qh512-0001/ffff88019810a500 start 1 [1/0 us]
[ 2.739226] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
[ 3.026879] Console: switching to colour frame buffer device 195x54
[ 3.035299] fb0: radeondrmfb frame buffer device
[ 3.035302] drm: registered panic notifier
[ 3.035318] [drm] Initialized radeon 2.12.0 20080528 for 0000:00:01.0 on minor 0
[ 3.035483] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.035636] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 3.035653] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 3.035672] ohci_hcd 0000:00:12.0: enabled AMD prefetch quirk
[ 3.035753] ohci_hcd 0000:00:12.0: created debug files
[ 3.035757] ohci_hcd 0000:00:12.0: supports USB remote wakeup
[ 3.035791] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0249000
[ 3.035913] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0010
[ 3.035989] ehci_hcd 0000:00:12.2: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 3.036083] hub 1-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
[ 3.074851] Disabling lock debugging due to kernel taint
[ 3.074905] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 3.090219] ohci_hcd 0000:00:12.0: OHCI controller state
[ 3.090246] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers
[ 3.090254] ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3
[ 3.090260] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0
[ 3.090266] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF
[ 3.090272] ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 3.090284] ohci_hcd 0000:00:12.0: hcca frame #0005
[ 3.090291] ohci_hcd 0000:00:12.0: roothub.a 02000205 POTPGT=2 NPS NDP=5(5)
[ 3.090297] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 3.090303] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE
[ 3.090310] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS
[ 3.090316] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS
[ 3.090322] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS
[ 3.090328] ohci_hcd 0000:00:12.0: roothub.portstatus [3] 0x00000100 PPS
[ 3.090334] ohci_hcd 0000:00:12.0: roothub.portstatus [4] 0x00000100 PPS
[ 3.090478] usb usb3: default language 0x0409
[ 3.090491] usb usb3: udev 1, busnum 3, minor = 256
[ 3.090495] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.090499] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.090504] usb usb3: Product: OHCI Host Controller
[ 3.090507] usb usb3: Manufacturer: Linux 3.2.1-gentoo-r2 ohci_hcd
[ 3.090511] usb usb3: SerialNumber: 0000:00:12.0
[ 3.090667] usb usb3: usb_probe_device
[ 3.090674] usb usb3: configuration #1 chosen from 1 choice
[ 3.090691] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 3.090741] hub 3-0:1.0: usb_probe_interface
[ 3.090745] hub 3-0:1.0: usb_probe_interface - got id
[ 3.090750] hub 3-0:1.0: USB hub found
[ 3.090809] hub 3-0:1.0: 5 ports detected
[ 3.090812] hub 3-0:1.0: standalone hub
[ 3.090815] hub 3-0:1.0: no power switching (usb 1.0)
[ 3.090819] hub 3-0:1.0: global over-current protection
[ 3.090823] hub 3-0:1.0: power on to power good time: 4ms
[ 3.090832] hub 3-0:1.0: local power source is good
[ 3.090835] hub 3-0:1.0: no over-current condition exists
[ 3.090839] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 3.090992] ehci_hcd 0000:00:12.2: HS companion for 0000:00:12.0
[ 3.091100] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.091212] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.091228] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 3.091241] ohci_hcd 0000:00:13.0: enabled AMD prefetch quirk
[ 3.091271] ohci_hcd 0000:00:13.0: created debug files
[ 3.091275] ohci_hcd 0000:00:13.0: supports USB remote wakeup
[ 3.091292] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0248000
[ 3.142105] hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
[ 3.146158] ohci_hcd 0000:00:13.0: OHCI controller state
[ 3.146188] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
[ 3.146196] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3
[ 3.146202] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
[ 3.146209] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
[ 3.146215] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 3.146227] ohci_hcd 0000:00:13.0: hcca frame #0005
[ 3.146234] ohci_hcd 0000:00:13.0: roothub.a 02000205 POTPGT=2 NPS NDP=5(5)
[ 3.146240] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 3.146246] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
[ 3.146252] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
[ 3.146259] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
[ 3.146265] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
[ 3.146271] ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
[ 3.146277] ohci_hcd 0000:00:13.0: roothub.portstatus [4] 0x00000100 PPS
[ 3.146304] usb usb4: default language 0x0409
[ 3.146317] usb usb4: udev 1, busnum 4, minor = 384
[ 3.146322] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.146326] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.146331] usb usb4: Product: OHCI Host Controller
[ 3.146334] usb usb4: Manufacturer: Linux 3.2.1-gentoo-r2 ohci_hcd
[ 3.146338] usb usb4: SerialNumber: 0000:00:13.0
[ 3.147236] usb usb4: usb_probe_device
[ 3.147246] usb usb4: configuration #1 chosen from 1 choice
[ 3.147269] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 3.147438] hub 4-0:1.0: usb_probe_interface
[ 3.147442] hub 4-0:1.0: usb_probe_interface - got id
[ 3.147448] hub 4-0:1.0: USB hub found
[ 3.147509] hub 4-0:1.0: 5 ports detected
[ 3.147512] hub 4-0:1.0: standalone hub
[ 3.147515] hub 4-0:1.0: no power switching (usb 1.0)
[ 3.147519] hub 4-0:1.0: global over-current protection
[ 3.147523] hub 4-0:1.0: power on to power good time: 4ms
[ 3.147532] hub 4-0:1.0: local power source is good
[ 3.147536] hub 4-0:1.0: no over-current condition exists
[ 3.147541] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 3.147699] ehci_hcd 0000:00:13.2: HS companion for 0000:00:13.0
[ 3.162575] [fglrx] Maximum main memory to use for locked dma buffers: 5373 MBytes.
[ 3.162662] [fglrx] vendor: 1002 device: 9802 count: 1
[ 3.163480] [fglrx] ioport: bar 1, base 0x4000, size: 0x100
[ 3.163495] radeon 0000:00:01.0: setting latency timer to 64
[ 3.164269] [fglrx] Kernel PAT support is enabled
[ 3.164314] [fglrx] module loaded - fglrx 8.91.4 [Oct 25 2011] with 1 minors
[ 3.165359] modprobe used greatest stack depth: 3248 bytes left
[ 3.193218] ehci_hcd 0000:00:12.2: port 4 full speed --> companion
[ 3.193231] ehci_hcd 0000:00:12.2: GetStatus port:4 status 003801 0 ACK POWER OWNER sig=j CONNECT
[ 3.193287] hub 1-0:1.0: port 4 not reset yet, waiting 50ms
[ 3.244351] ehci_hcd 0000:00:12.2: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC
[ 3.244394] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0010
[ 3.244408] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00010101 CSC PPS CCS
[ 3.244417] hub 3-0:1.0: port 4, status 0101, change 0001, 12 Mb/s
[ 3.348352] hub 3-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x101
[ 3.370204] ohci_hcd 0000:00:12.0: port[3] reset timeout, stat 00000111
[ 3.421356] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
[ 3.472314] usb 3-4: new full-speed USB device number 2 using ohci_hcd
[ 3.495212] ohci_hcd 0000:00:12.0: port[3] reset timeout, stat 00000113
[ 3.546359] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
[ 3.621280] usb 3-4: skipped 1 descriptor after interface
[ 3.623248] usb 3-4: default language 0x0409
[ 3.629248] usb 3-4: udev 2, busnum 3, minor = 257
[ 3.629258] usb 3-4: New USB device found, idVendor=0a5c, idProduct=217f
[ 3.629268] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.629276] usb 3-4: Product: Broadcom Bluetooth Device
[ 3.629284] usb 3-4: Manufacturer: Broadcom Corp
[ 3.629291] usb 3-4: SerialNumber: E02A82F2FAD4
[ 3.629459] usb 3-4: usb_probe_device
[ 3.629467] usb 3-4: configuration #1 chosen from 1 choice
[ 3.631300] usb 3-4: adding 3-4:1.0 (config #1, interface 0)
[ 3.631497] usb 3-4: adding 3-4:1.1 (config #1, interface 1)
[ 3.631608] usb 3-4: adding 3-4:1.2 (config #1, interface 2)
[ 3.631719] usb 3-4: adding 3-4:1.3 (config #1, interface 3)
[ 3.632194] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0010
[ 3.632278] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0000
[ 3.632299] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0010
[ 3.648287] Bluetooth: Core ver 2.16
[ 3.648341] NET: Registered protocol family 31
[ 3.648346] Bluetooth: HCI device and connection manager initialized
[ 3.648353] Bluetooth: HCI socket layer initialized
[ 3.648357] Bluetooth: L2CAP socket layer initialized
[ 3.648367] Bluetooth: SCO socket layer initialized
[ 3.650484] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3.650520] btusb 3-4:1.0: usb_probe_interface
[ 3.650526] btusb 3-4:1.0: usb_probe_interface - got id
[ 3.651449] btusb 3-4:1.2: usb_probe_interface
[ 3.651455] btusb 3-4:1.2: usb_probe_interface - got id
[ 3.651475] btusb 3-4:1.3: usb_probe_interface
[ 3.651480] btusb 3-4:1.3: usb_probe_interface - got id
[ 3.651759] usbcore: registered new interface driver btusb
[ 4.704308] usb 2-5: usb auto-suspend, wakeup 0
[ 5.704291] hub 4-0:1.0: hub_suspend
[ 5.704312] usb usb4: bus auto-suspend, wakeup 1
[ 5.704319] ohci_hcd 0000:00:13.0: suspend root hub
[ 5.704333] hub 1-0:1.0: hub_suspend
[ 5.704339] usb usb1: bus auto-suspend, wakeup 1
[ 5.704344] ehci_hcd 0000:00:12.2: suspend root hub
[ 6.715320] hub 2-0:1.0: hub_suspend
[ 6.715341] usb usb2: bus auto-suspend, wakeup 1
[ 6.715346] ehci_hcd 0000:00:13.2: suspend root hub
[ 33.220292] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd000b3/0x340000/0xa0400
[ 33.220309] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[ 33.260845] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 33.480586] EXT4-fs (sda4): re-mounted. Opts: discard
[ 34.871862] r8169 0000:01:00.0: eth0: link down
[ 37.484316] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 39.027736] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 39.243520] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input8
[ 43.096464] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 43.912388] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 45.401832] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 45.852971] r8169 0000:01:00.0: eth0: link down
[ 45.892011] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 48.346443] NET: Registered protocol family 17
[ 48.373735] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 49.772327] wlan0: authenticate with c4:3d:c7:a8:67:cf (try 1)
[ 49.773891] wlan0: authenticated
[ 49.773958] wlan0: associate with c4:3d:c7:a8:67:cf (try 1)
[ 49.778604] wlan0: RX AssocResp from c4:3d:c7:a8:67:cf (capab=0x431 status=0 aid=1)
[ 49.778614] wlan0: associated