rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.2.1-gentoo-r2 (root@####) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #5 SMP Mon Feb 20 17:27:41 CST 2012
[ 0.000000] Command line: root=/dev/sda4 BOOT_IMAGE=/boot/vmlinuz-3.2.1-gentoo-r2
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c6e7a000 (usable)
[ 0.000000] BIOS-e820: 00000000c6e7a000 - 00000000c728a000 (reserved)
[ 0.000000] BIOS-e820: 00000000c728a000 - 00000000c730a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c730a000 - 00000000c736a000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c736a000 - 00000000c7d80000 (usable)
[ 0.000000] BIOS-e820: 00000000c7d80000 - 00000000c8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed81000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000019f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: LENOVO 0596CTO/0596CTO, BIOS 8FET31WW (1.15 ) 08/25/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x19f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0FFF90000 mask FFFFF0000 uncachable
[ 0.000000] 4 base 0FED80000 mask FFFFFF000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] TOM2: 000000019f000000 aka 6640M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xc7d80 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7d80000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7c00000 page 2M
[ 0.000000] 00c7c00000 - 00c7d80000 page 4k
[ 0.000000] kernel direct mapping tables up to c7d80000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000019f000000
[ 0.000000] 0100000000 - 0180000000 page 1G
[ 0.000000] 0180000000 - 019f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 19f000000 @ c7d7e000-c7d80000
[ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000c7369120 00074 (v01 LENOVO TP-8F 00000003 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000c7357000 000F4 (v04 LENOVO TP-8F 00001150 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000c7359000 0EBCE (v01 LENOVO TP-8F 00001000 PTEC 00001150)
[ 0.000000] ACPI: FACS 00000000c72f5000 00040
[ 0.000000] ACPI: SLIC 00000000c7368000 00176 (v01 LENOVO TP-8F 00001150 PTEC 00000001)
[ 0.000000] ACPI: HPET 00000000c7356000 00038 (v01 LENOVO TP-8F 00001150 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000c7355000 0005E (v02 LENOVO TP-8F 00001150 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000c7354000 0003C (v01 LENOVO TP-8F 00001150 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c7353000 0003E (v01 LENOVO TP-8F 00001150 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c7352000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000c7351000 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000c734f000 012FA (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: UEFI 00000000c734e000 0012A (v01 LENOVO TP-8F 00001150 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880198c00000-ffff88019e5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0019f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000c6e7a
[ 0.000000] 0: 0x000c736a -> 0x000c7d80
[ 0.000000] 0: 0x00100000 -> 0x0019f000
[ 0.000000] On node 0 totalpages: 1468445
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 796880 pages, LIFO batch:31
[ 0.000000] Normal zone: 10176 pages used for memmap
[ 0.000000] Normal zone: 641088 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c6e7a000 - 00000000c728a000
[ 0.000000] PM: Registered nosave memory: 00000000c728a000 - 00000000c730a000
[ 0.000000] PM: Registered nosave memory: 00000000c730a000 - 00000000c736a000
[ 0.000000] PM: Registered nosave memory: 00000000c7d80000 - 00000000c8000000
[ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
[ 0.000000] PM: Registered nosave memory: 00000000fed81000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:36c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88019ec00000 s76288 r8192 d22016 u1048576
[ 0.000000] pcpu-alloc: s76288 r8192 d22016 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1441880
[ 0.000000] Kernel command line: root=/dev/sda4 BOOT_IMAGE=/boot/vmlinuz-3.2.1-gentoo-r2
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 5695080k/6799360k available (3348k kernel code, 925580k absent, 178700k reserved, 3131k data, 460k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.822 MHz processor.
[ 0.001006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.64 BogoMIPS (lpj=1596822)
[ 0.001325] pid_max: default: 32768 minimum: 301
[ 0.001555] Mount-cache hash table entries: 256
[ 0.002215] Initializing cgroup subsys cpuacct
[ 0.002335] Initializing cgroup subsys freezer
[ 0.002540] tseg: 00c7d80000
[ 0.002545] CPU: Physical Processor ID: 0
[ 0.002749] CPU: Processor Core ID: 0
[ 0.003006] mce: CPU supports 6 MCE banks
[ 0.003929] ACPI: Core revision 20110623
[ 0.018164] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028066] CPU0: AMD E-350 Processor stepping 00
[ 0.028998] Performance Events: AMD PMU driver.
[ 0.028998] ... version: 0
[ 0.028998] ... bit width: 48
[ 0.028998] ... generic registers: 4
[ 0.028998] ... value mask: 0000ffffffffffff
[ 0.028998] ... max period: 00007fffffffffff
[ 0.029001] ... fixed-purpose events: 0
[ 0.029168] ... event mask: 000000000000000f
[ 0.029554] MCE: In-kernel MCE decoding enabled.
[ 0.029944] Booting Node 0, Processors #1 Ok.
[ 0.030145] smpboot cpu 1: start_ip = 98000
[ 0.102007] Brought up 2 CPUs
[ 0.102175] Total of 2 processors activated (6386.57 BogoMIPS).
[ 0.103323] PM: Registering ACPI NVS region at c728a000 (524288 bytes)
[ 0.104176] RTC time: 17:29:13, date: 02/20/12
[ 0.104419] NET: Registered protocol family 16
[ 0.105031] kworker/u:0 used greatest stack depth: 6504 bytes left
[ 0.105261] kworker/u:0 used greatest stack depth: 6168 bytes left
[ 0.105479] Extended Config Space enabled on 0 nodes
[ 0.106043] ACPI: bus type pci registered
[ 0.106238] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000)
[ 0.106432] PCI: not using MMCONFIG
[ 0.106996] PCI: Using configuration type 1 for base access
[ 0.107126] PCI: Using configuration type 1 for extended access
[ 0.107521] kworker/u:0 used greatest stack depth: 5768 bytes left
[ 0.118093] bio: create slab <bio-0> at 0
[ 0.119201] ACPI: Added _OSI(Module Device)
[ 0.119273] ACPI: Added _OSI(Processor Device)
[ 0.119438] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.120007] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.123180] ACPI: EC: Look up EC in DSDT
[ 0.134874] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.143273] ACPI: Interpreter enabled
[ 0.143447] ACPI: (supports S0 S3 S4 S5)
[ 0.143800] ACPI: Using IOAPIC for interrupt routing
[ 0.144275] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000)
[ 0.145121] PCI: MMCONFIG at [mem 0xf8000000-0xf9ffffff] reserved in ACPI motherboard resources
[ 0.176259] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.177243] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.178947] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.181512] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.181821] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c1fff]
[ 0.181986] pci_root PNP0A08:00: host bridge window [mem 0x000c2000-0x000c3fff]
[ 0.182203] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c5fff]
[ 0.182452] pci_root PNP0A08:00: host bridge window [mem 0x000c6000-0x000c7fff]
[ 0.182701] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000c9fff]
[ 0.182985] pci_root PNP0A08:00: host bridge window [mem 0x000ca000-0x000cbfff]
[ 0.183186] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cdfff]
[ 0.183419] pci_root PNP0A08:00: host bridge window [mem 0x000ce000-0x000cffff]
[ 0.183653] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d1fff]
[ 0.183886] pci_root PNP0A08:00: host bridge window [mem 0x000d2000-0x000d3fff]
[ 0.183984] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff]
[ 0.184186] pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff]
[ 0.184420] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff]
[ 0.184650] pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff]
[ 0.186984] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff]
[ 0.187213] pci_root PNP0A08:00: host bridge window [mem 0x000de000-0x000dffff]
[ 0.187984] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e1fff]
[ 0.188176] pci_root PNP0A08:00: host bridge window [mem 0x000e2000-0x000e3fff]
[ 0.188405] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e5fff]
[ 0.188636] pci_root PNP0A08:00: host bridge window [mem 0x000e6000-0x000e7fff]
[ 0.188867] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000e9fff]
[ 0.188984] pci_root PNP0A08:00: host bridge window [mem 0x000ea000-0x000ebfff]
[ 0.189185] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000edfff]
[ 0.189419] pci_root PNP0A08:00: host bridge window [mem 0x000ee000-0x000effff]
[ 0.189653] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff]
[ 0.189871] pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xffffffff]
[ 0.189984] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.190147] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.190346] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000ce000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce1ff])
[ 0.190657] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
[ 0.190720] pci 0000:00:01.0: [1002:9802] type 0 class 0x000300
[ 0.190735] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.190746] pci 0000:00:01.0: reg 14: [io 0x4000-0x40ff]
[ 0.190757] pci 0000:00:01.0: reg 18: [mem 0xf0200000-0xf023ffff]
[ 0.191014] pci 0000:00:01.0: supports D1 D2
[ 0.191043] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
[ 0.191057] pci 0000:00:01.1: reg 10: [mem 0xf0244000-0xf0247fff]
[ 0.191114] pci 0000:00:01.1: supports D1 D2
[ 0.191183] pci 0000:00:06.0: [1022:1514] type 1 class 0x000604
[ 0.191240] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.191247] pci 0000:00:06.0: PME# disabled
[ 0.191304] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.191330] pci 0000:00:11.0: reg 10: [io 0x4118-0x411f]
[ 0.191344] pci 0000:00:11.0: reg 14: [io 0x4124-0x4127]
[ 0.191358] pci 0000:00:11.0: reg 18: [io 0x4110-0x4117]
[ 0.191373] pci 0000:00:11.0: reg 1c: [io 0x4120-0x4123]
[ 0.191387] pci 0000:00:11.0: reg 20: [io 0x4100-0x410f]
[ 0.191401] pci 0000:00:11.0: reg 24: [mem 0xf024a000-0xf024a3ff]
[ 0.191477] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.191496] pci 0000:00:12.0: reg 10: [mem 0xf0249000-0xf0249fff]
[ 0.191593] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.191619] pci 0000:00:12.2: reg 10: [mem 0xf024a500-0xf024a5ff]
[ 0.191710] pci 0000:00:12.2: supports D1 D2
[ 0.191714] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.191720] pci 0000:00:12.2: PME# disabled
[ 0.191756] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.191775] pci 0000:00:13.0: reg 10: [mem 0xf0248000-0xf0248fff]
[ 0.191871] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.191897] pci 0000:00:13.2: reg 10: [mem 0xf024a400-0xf024a4ff]
[ 0.191995] pci 0000:00:13.2: supports D1 D2
[ 0.191999] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.192006] pci 0000:00:13.2: PME# disabled
[ 0.192042] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.192149] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.192179] pci 0000:00:14.2: reg 10: [mem 0xf0240000-0xf0243fff 64bit]
[ 0.192255] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.192262] pci 0000:00:14.2: PME# disabled
[ 0.192286] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.192388] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.192463] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.192540] pci 0000:00:15.0: supports D1 D2
[ 0.192582] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
[ 0.192661] pci 0000:00:15.1: supports D1 D2
[ 0.192708] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[ 0.192759] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[ 0.192808] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[ 0.192857] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[ 0.192916] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[ 0.192963] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[ 0.193017] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[ 0.193062] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[ 0.193182] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[ 0.193201] pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.193232] pci 0000:01:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.193253] pci 0000:01:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.193268] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.193311] pci 0000:01:00.0: supports D1 D2
[ 0.193314] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193321] pci 0000:01:00.0: PME# disabled
[ 0.195016] pci 0000:00:06.0: PCI bridge to [bus 01-01]
[ 0.195182] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff]
[ 0.195193] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.195275] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.195455] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.195460] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c1fff] (subtractive decode)
[ 0.195465] pci 0000:00:14.4: bridge window [mem 0x000c2000-0x000c3fff] (subtractive decode)
[ 0.195470] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c5fff] (subtractive decode)
[ 0.195475] pci 0000:00:14.4: bridge window [mem 0x000c6000-0x000c7fff] (subtractive decode)
[ 0.195480] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000c9fff] (subtractive decode)
[ 0.195485] pci 0000:00:14.4: bridge window [mem 0x000ca000-0x000cbfff] (subtractive decode)
[ 0.195490] pci 0000:00:14.4: bridge window [mem 0x000cc000-0x000cdfff] (subtractive decode)
[ 0.195495] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode)
[ 0.195500] pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode)
[ 0.195505] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
[ 0.195510] pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
[ 0.195515] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
[ 0.195520] pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
[ 0.195525] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
[ 0.195530] pci 0000:00:14.4: bridge window [mem 0x000de000-0x000dffff] (subtractive decode)
[ 0.195535] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e1fff] (subtractive decode)
[ 0.195540] pci 0000:00:14.4: bridge window [mem 0x000e2000-0x000e3fff] (subtractive decode)
[ 0.195545] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e5fff] (subtractive decode)
[ 0.195550] pci 0000:00:14.4: bridge window [mem 0x000e6000-0x000e7fff] (subtractive decode)
[ 0.195555] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000e9fff] (subtractive decode)
[ 0.195560] pci 0000:00:14.4: bridge window [mem 0x000ea000-0x000ebfff] (subtractive decode)
[ 0.195565] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000edfff] (subtractive decode)
[ 0.195570] pci 0000:00:14.4: bridge window [mem 0x000ee000-0x000effff] (subtractive decode)
[ 0.195575] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[ 0.195580] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xffffffff] (subtractive decode)
[ 0.195585] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.195590] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.195709] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.195998] pci 0000:04:00.0: [10ec:8176] type 0 class 0x000280
[ 0.196025] pci 0000:04:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.196069] pci 0000:04:00.0: reg 18: [mem 0xf0100000-0xf0103fff 64bit]
[ 0.196169] pci 0000:04:00.0: supports D1 D2
[ 0.196173] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196182] pci 0000:04:00.0: PME# disabled
[ 0.198045] pci 0000:00:15.1: PCI bridge to [bus 04-04]
[ 0.198198] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff]
[ 0.198205] pci 0000:00:15.1: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.198239] pci_bus 0000:00: on NUMA node 0
[ 0.198248] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.198571] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.198761] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.198892] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT]
[ 0.198990] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB1._PRT]
[ 0.199333] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.200018] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.215020] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0
[ 0.215572] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0
[ 0.216072] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0
[ 0.216602] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0
[ 0.217069] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
[ 0.217551] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0
[ 0.217999] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0
[ 0.218479] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0
[ 0.219161] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.219340] vgaarb: loaded
[ 0.219502] vgaarb: bridge control possible 0000:00:01.0
[ 0.220222] SCSI subsystem initialized
[ 0.220245] libata version 3.00 loaded.
[ 0.221131] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.221298] PCI: Using ACPI for IRQ routing
[ 0.223340] PCI: pci_cache_line_size set to 64 bytes
[ 0.223584] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.223590] reserve RAM buffer: 00000000c6e7a000 - 00000000c7ffffff
[ 0.223595] reserve RAM buffer: 00000000c7d80000 - 00000000c7ffffff
[ 0.223600] reserve RAM buffer: 000000019f000000 - 000000019fffffff
[ 0.224067] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.224390] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.226006] Switching to clocksource hpet
[ 0.243995] pnp: PnP ACPI init
[ 0.244179] ACPI: bus type pnp registered
[ 0.245565] pnp 00:00: [bus 00-ff]
[ 0.245572] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.245577] pnp 00:00: [mem 0x000c0000-0x000c1fff window]
[ 0.245582] pnp 00:00: [mem 0x000c2000-0x000c3fff window]
[ 0.245586] pnp 00:00: [mem 0x000c4000-0x000c5fff window]
[ 0.245591] pnp 00:00: [mem 0x000c6000-0x000c7fff window]
[ 0.245595] pnp 00:00: [mem 0x000c8000-0x000c9fff window]
[ 0.245599] pnp 00:00: [mem 0x000ca000-0x000cbfff window]
[ 0.245604] pnp 00:00: [mem 0x000cc000-0x000cdfff window]
[ 0.245608] pnp 00:00: [mem 0x000ce000-0x000cffff window]
[ 0.245612] pnp 00:00: [mem 0x000d0000-0x000d1fff window]
[ 0.245617] pnp 00:00: [mem 0x000d2000-0x000d3fff window]
[ 0.245621] pnp 00:00: [mem 0x000d4000-0x000d5fff window]
[ 0.245625] pnp 00:00: [mem 0x000d6000-0x000d7fff window]
[ 0.245630] pnp 00:00: [mem 0x000d8000-0x000d9fff window]
[ 0.245634] pnp 00:00: [mem 0x000da000-0x000dbfff window]
[ 0.245638] pnp 00:00: [mem 0x000dc000-0x000ddfff window]
[ 0.245642] pnp 00:00: [mem 0x000de000-0x000dffff window]
[ 0.245647] pnp 00:00: [mem 0x000e0000-0x000e1fff window]
[ 0.245651] pnp 00:00: [mem 0x000e2000-0x000e3fff window]
[ 0.245655] pnp 00:00: [mem 0x000e4000-0x000e5fff window]
[ 0.245660] pnp 00:00: [mem 0x000e6000-0x000e7fff window]
[ 0.245664] pnp 00:00: [mem 0x000e8000-0x000e9fff window]
[ 0.245671] pnp 00:00: [mem 0x000ea000-0x000ebfff window]
[ 0.245675] pnp 00:00: [mem 0x000ec000-0x000edfff window]
[ 0.245680] pnp 00:00: [mem 0x000ee000-0x000effff window]
[ 0.245684] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[ 0.245689] pnp 00:00: [mem 0xf8000000-0xffffffff window]
[ 0.245693] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.245697] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.245701] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.246192] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.246358] pnp 00:01: [io 0x0f50-0x0f51]
[ 0.246364] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.246369] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.246373] pnp 00:01: [mem 0xf8000000-0xf9ffffff]
[ 0.246672] system 00:01: [io 0x0f50-0x0f51] has been reserved
[ 0.246855] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.247042] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.247215] system 00:01: [mem 0xf8000000-0xf9ffffff] has been reserved
[ 0.247358] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.248234] pnp 00:02: [io 0x0000-0x001f]
[ 0.248239] pnp 00:02: [io 0x0081-0x008f]
[ 0.248244] pnp 00:02: [io 0x00c0-0x00de]
[ 0.248247] pnp 00:02: [io 0x040b]
[ 0.248251] pnp 00:02: [io 0x04d6]
[ 0.248256] pnp 00:02: [dma 4]
[ 0.248590] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.248639] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.248707] pnp 00:03: [irq 13]
[ 0.248991] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.249043] pnp 00:04: [io 0x0070-0x0071]
[ 0.249054] pnp 00:04: [irq 8]
[ 0.249241] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.249260] pnp 00:05: [io 0x0061]
[ 0.249534] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.249589] pnp 00:06: [io 0x0060]
[ 0.249594] pnp 00:06: [io 0x0064]
[ 0.249660] pnp 00:06: [irq 1]
[ 0.249918] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.250068] pnp 00:07: [irq 12]
[ 0.250260] pnp 00:07: Plug and Play ACPI device, IDs LEN0017 PNP0f13 (active)
[ 0.250290] pnp 00:08: [io 0x0022-0x0023]
[ 0.250294] pnp 00:08: [io 0x002e-0x002f]
[ 0.250298] pnp 00:08: [io 0x0072-0x0073]
[ 0.250302] pnp 00:08: [io 0x0080]
[ 0.250305] pnp 00:08: [io 0x0092]
[ 0.250309] pnp 00:08: [io 0x00b0-0x00b1]
[ 0.250313] pnp 00:08: [io 0x00b2]
[ 0.250316] pnp 00:08: [io 0x00b8]
[ 0.250319] pnp 00:08: [io 0x00bc]
[ 0.250323] pnp 00:08: [io 0x00f0]
[ 0.250326] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.250330] pnp 00:08: [io 0x0530-0x0537]
[ 0.250334] pnp 00:08: [io 0x0800-0x0827]
[ 0.250337] pnp 00:08: [io 0x0830]
[ 0.250341] pnp 00:08: [io 0x0840-0x0847]
[ 0.250348] pnp 00:08: [io 0x0b00-0x0b1f]
[ 0.250351] pnp 00:08: [io 0x0b20-0x0b3f]
[ 0.250355] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.250358] pnp 00:08: [io 0x0c14]
[ 0.250362] pnp 00:08: [io 0x0c50-0x0c52]
[ 0.250365] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.250369] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.250373] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.250376] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.250380] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.250383] pnp 00:08: [io 0x0cf9]
[ 0.250388] pnp 00:08: [io 0x8100-0x81ff window]
[ 0.250392] pnp 00:08: [io 0x8200-0x82ff window]
[ 0.250808] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.251066] system 00:08: [io 0x0530-0x0537] has been reserved
[ 0.251229] system 00:08: [io 0x0800-0x0827] has been reserved
[ 0.251360] system 00:08: [io 0x0830] has been reserved
[ 0.251529] system 00:08: [io 0x0840-0x0847] has been reserved
[ 0.251697] system 00:08: [io 0x0b00-0x0b1f] has been reserved
[ 0.251866] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.252045] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.252216] system 00:08: [io 0x0c14] has been reserved
[ 0.252353] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.252522] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.252681] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.252843] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.253014] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.253142] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.253303] system 00:08: [io 0x0cf9] could not be reserved
[ 0.253440] system 00:08: [io 0x8100-0x81ff window] has been reserved
[ 0.253602] system 00:08: [io 0x8200-0x82ff window] has been reserved
[ 0.253772] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.254265] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.254271] pnp 00:09: [mem 0xffe00000-0xffffffff]
[ 0.254276] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.254280] pnp 00:09: [mem 0xfec10000-0xfec1001f]
[ 0.254284] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.254288] pnp 00:09: [mem 0xfed61000-0xfed613ff]
[ 0.254292] pnp 00:09: [mem 0xfed80000-0xfed80fff]
[ 0.254748] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.254921] system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.255113] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.255243] system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.255406] system 00:09: [mem 0xfed61000-0xfed613ff] has been reserved
[ 0.255568] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.255737] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.256234] pnp: PnP ACPI: found 10 devices
[ 0.256440] ACPI: ACPI bus type pnp unregistered
[ 0.262157] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.262443] PCI: max bus depth: 1 pci_try_num: 2
[ 0.262508] pci 0000:00:06.0: BAR 14: assigned [mem 0xf0300000-0xf03fffff]
[ 0.262697] pci 0000:00:15.1: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.262950] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0020000-0xf003ffff pref]
[ 0.263166] pci 0000:00:06.0: PCI bridge to [bus 01-01]
[ 0.263337] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff]
[ 0.263515] pci 0000:00:06.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.263689] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.263934] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[ 0.264117] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.264243] pci 0000:00:15.1: PCI bridge to [bus 04-04]
[ 0.264404] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff]
[ 0.264570] pci 0000:00:15.1: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.264735] pci 0000:00:15.1: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.265020] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.265190] pci 0000:00:06.0: setting latency timer to 64
[ 0.265216] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.265352] pci 0000:00:15.0: setting latency timer to 64
[ 0.265363] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.265527] pci 0000:00:15.1: setting latency timer to 64
[ 0.265534] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.265539] pci_bus 0000:00: resource 5 [mem 0x000c0000-0x000c1fff]
[ 0.265544] pci_bus 0000:00: resource 6 [mem 0x000c2000-0x000c3fff]
[ 0.265548] pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c5fff]
[ 0.265553] pci_bus 0000:00: resource 8 [mem 0x000c6000-0x000c7fff]
[ 0.265557] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000c9fff]
[ 0.265562] pci_bus 0000:00: resource 10 [mem 0x000ca000-0x000cbfff]
[ 0.265566] pci_bus 0000:00: resource 11 [mem 0x000cc000-0x000cdfff]
[ 0.265570] pci_bus 0000:00: resource 12 [mem 0x000d0000-0x000d1fff]
[ 0.265575] pci_bus 0000:00: resource 13 [mem 0x000d2000-0x000d3fff]
[ 0.265579] pci_bus 0000:00: resource 14 [mem 0x000d4000-0x000d5fff]
[ 0.265583] pci_bus 0000:00: resource 15 [mem 0x000d6000-0x000d7fff]
[ 0.265588] pci_bus 0000:00: resource 16 [mem 0x000d8000-0x000d9fff]
[ 0.265592] pci_bus 0000:00: resource 17 [mem 0x000da000-0x000dbfff]
[ 0.265597] pci_bus 0000:00: resource 18 [mem 0x000dc000-0x000ddfff]
[ 0.265601] pci_bus 0000:00: resource 19 [mem 0x000de000-0x000dffff]
[ 0.265606] pci_bus 0000:00: resource 20 [mem 0x000e0000-0x000e1fff]
[ 0.265610] pci_bus 0000:00: resource 21 [mem 0x000e2000-0x000e3fff]
[ 0.265614] pci_bus 0000:00: resource 22 [mem 0x000e4000-0x000e5fff]
[ 0.265619] pci_bus 0000:00: resource 23 [mem 0x000e6000-0x000e7fff]
[ 0.265623] pci_bus 0000:00: resource 24 [mem 0x000e8000-0x000e9fff]
[ 0.265628] pci_bus 0000:00: resource 25 [mem 0x000ea000-0x000ebfff]
[ 0.265632] pci_bus 0000:00: resource 26 [mem 0x000ec000-0x000edfff]
[ 0.265637] pci_bus 0000:00: resource 27 [mem 0x000ee000-0x000effff]
[ 0.265641] pci_bus 0000:00: resource 28 [mem 0xe0000000-0xf7ffffff]
[ 0.265646] pci_bus 0000:00: resource 29 [mem 0xf8000000-0xffffffff]
[ 0.265650] pci_bus 0000:00: resource 30 [io 0x0000-0x0cf7]
[ 0.265655] pci_bus 0000:00: resource 31 [io 0x0d00-0xffff]
[ 0.265660] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.265664] pci_bus 0000:01: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.265668] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.265673] pci_bus 0000:02: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.265678] pci_bus 0000:02: resource 5 [mem 0x000c0000-0x000c1fff]
[ 0.265682] pci_bus 0000:02: resource 6 [mem 0x000c2000-0x000c3fff]
[ 0.265686] pci_bus 0000:02: resource 7 [mem 0x000c4000-0x000c5fff]
[ 0.265690] pci_bus 0000:02: resource 8 [mem 0x000c6000-0x000c7fff]
[ 0.265695] pci_bus 0000:02: resource 9 [mem 0x000c8000-0x000c9fff]
[ 0.265699] pci_bus 0000:02: resource 10 [mem 0x000ca000-0x000cbfff]
[ 0.265703] pci_bus 0000:02: resource 11 [mem 0x000cc000-0x000cdfff]
[ 0.265708] pci_bus 0000:02: resource 12 [mem 0x000d0000-0x000d1fff]
[ 0.265712] pci_bus 0000:02: resource 13 [mem 0x000d2000-0x000d3fff]
[ 0.265717] pci_bus 0000:02: resource 14 [mem 0x000d4000-0x000d5fff]
[ 0.265721] pci_bus 0000:02: resource 15 [mem 0x000d6000-0x000d7fff]
[ 0.265725] pci_bus 0000:02: resource 16 [mem 0x000d8000-0x000d9fff]
[ 0.265730] pci_bus 0000:02: resource 17 [mem 0x000da000-0x000dbfff]
[ 0.265734] pci_bus 0000:02: resource 18 [mem 0x000dc000-0x000ddfff]
[ 0.265738] pci_bus 0000:02: resource 19 [mem 0x000de000-0x000dffff]
[ 0.265743] pci_bus 0000:02: resource 20 [mem 0x000e0000-0x000e1fff]
[ 0.265747] pci_bus 0000:02: resource 21 [mem 0x000e2000-0x000e3fff]
[ 0.265752] pci_bus 0000:02: resource 22 [mem 0x000e4000-0x000e5fff]
[ 0.265756] pci_bus 0000:02: resource 23 [mem 0x000e6000-0x000e7fff]
[ 0.265760] pci_bus 0000:02: resource 24 [mem 0x000e8000-0x000e9fff]
[ 0.265765] pci_bus 0000:02: resource 25 [mem 0x000ea000-0x000ebfff]
[ 0.265769] pci_bus 0000:02: resource 26 [mem 0x000ec000-0x000edfff]
[ 0.265773] pci_bus 0000:02: resource 27 [mem 0x000ee000-0x000effff]
[ 0.265778] pci_bus 0000:02: resource 28 [mem 0xe0000000-0xf7ffffff]
[ 0.265782] pci_bus 0000:02: resource 29 [mem 0xf8000000-0xffffffff]
[ 0.265787] pci_bus 0000:02: resource 30 [io 0x0000-0x0cf7]
[ 0.265791] pci_bus 0000:02: resource 31 [io 0x0d00-0xffff]
[ 0.265796] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.265800] pci_bus 0000:04: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.265805] pci_bus 0000:04: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.265875] NET: Registered protocol family 2
[ 0.266203] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.268229] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.271632] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.272596] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.272820] TCP reno registered
[ 0.272995] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.273262] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.273679] pci 0000:00:01.0: Boot video device
[ 0.398330] PCI: CLS 32 bytes, default 64
[ 0.398447] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.398672] Placing 64MB software IO TLB between ffff8800c2e7a000 - ffff8800c6e7a000
[ 0.398920] software IO TLB at phys 0xc2e7a000 - 0xc6e7a000
[ 0.401596] perf: AMD IBS detected (0x000000ff)
[ 0.403923] audit: initializing netlink socket (disabled)
[ 0.404138] type=2000 audit(1329758952.403:1): initialized
[ 0.453506] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.520563] VFS: Disk quotas dquot_6.5.2
[ 0.521090] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.523410] msgmni has been set to 11123
[ 0.524543] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.524805] io scheduler noop registered
[ 0.524972] io scheduler deadline registered
[ 0.525355] io scheduler cfq registered (default)
[ 0.525801] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.525870] pcieport 0000:00:06.0: irq 40 for MSI/MSI-X
[ 0.526286] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.526368] pcieport 0000:00:15.0: irq 41 for MSI/MSI-X
[ 0.526615] pcieport 0000:00:15.1: setting latency timer to 64
[ 0.526686] pcieport 0000:00:15.1: irq 42 for MSI/MSI-X
[ 0.527651] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 0.527883] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.528086] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[ 0.528123] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 0.528299] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 0.528336] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[ 0.528509] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.528683] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[ 0.529150] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.530416] Non-volatile memory driver v1.3
[ 0.531940] ACPI: AC Adapter [ACAD] (off-line)
[ 0.532682] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.532948] ACPI: Power Button [PWRB]
[ 0.533381] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.533631] ACPI: Sleep Button [SLPB]
[ 0.534111] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.534783] ACPI: Lid Switch [LID]
[ 0.535318] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.535573] ACPI: Power Button [PWRF]
[ 0.536410] ACPI: acpi_idle registered with cpuidle
[ 0.542248] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.542476] ACPI: Thermal Zone [THZ0] (76 C)
[ 0.543780] ahci 0000:00:11.0: version 3.0
[ 0.543855] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.544271] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 0.544549] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio ccc
[ 0.545912] scsi0 : ahci
[ 0.546888] ata1: SATA max UDMA/133 abar m1024@0xf024a000 port 0xf024a100 irq 19
[ 0.547497] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.547756] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.548040] r8169 0000:01:00.0: setting latency timer to 64
[ 0.548110] r8169 0000:01:00.0: irq 43 for MSI/MSI-X
[ 0.548893] r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xffffc90000036000, 60:eb:69:d9:6d:f3, XID 083000c0 IRQ 43
[ 0.549359] r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.550375] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.567776] i8042: Detected active multiplexing controller, rev 1.1
[ 0.583563] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.583741] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.584041] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.584319] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.584539] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.585240] mousedev: PS/2 mouse device common for all mice
[ 0.586658] rtc_cmos 00:04: RTC can wake from S4
[ 0.587248] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.587478] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.591660] cpuidle: using governor ladder
[ 0.594226] cpuidle: using governor menu
[ 0.594386] EFI Variables Facility v0.08 2004-May-17
[ 0.596569] snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.596952] snd_hda_intel 0000:00:01.1: irq 44 for MSI/MSI-X
[ 0.596990] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[ 0.603340] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 0.604271] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
[ 0.606445] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.606634] ACPI: Battery Slot [BAT1] (battery present)
[ 0.624356] ALSA device list:
[ 0.624534] #0: HD-Audio Generic at 0xf0244000 irq 44
[ 0.624703] #1: HDA ATI SB at 0xf0240000 irq 16
[ 0.625188] TCP cubic registered
[ 0.626124] PM: Checking hibernation image partition /dev/sda6
[ 0.626833] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.007359] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.019821] ata1.00: ATA-8: OCZ-VERTEX3, 2.15, max UDMA/133
[ 1.019998] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.029671] ata1.00: configured for UDMA/133
[ 1.030513] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.15 PQ: 0 ANSI: 5
[ 1.032107] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.032993] sd 0:0:0:0: [sda] Write Protect is off
[ 1.033207] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.033287] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.035360] sda: sda1 sda2 sda3 sda4
[ 1.037439] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.400143] Refined TSC clocksource calibration: 1596.599 MHz.
[ 1.400338] Switching to clocksource tsc
[ 1.638910] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd000b3/0x340000/0xa0400
[ 1.639244] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[ 1.679354] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 1.682786] PM: Hibernation image partition 8:6 present
[ 1.682796] PM: Looking for hibernation image.
[ 1.682838] PM: Image not found (code -6)
[ 1.682845] PM: Hibernation image not present or could not be loaded.
[ 1.682888] registered taskstats version 1
[ 1.710119] Magic number: 0:208:492
[ 6.969050] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 7.195109] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input7
[ 7.274664] EXT4-fs (sda4): couldn't mount as ext3 due to feature incompatibilities
[ 7.285574] EXT4-fs (sda4): couldn't mount as ext2 due to feature incompatibilities
[ 7.299821] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 7.300153] VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
[ 7.302450] Freeing unused kernel memory: 460k freed
[ 7.302881] Write protecting the kernel read-only data: 6144k
[ 7.309925] Freeing unused kernel memory: 732k freed
[ 7.317218] Freeing unused kernel memory: 736k freed
[ 7.391492] cat used greatest stack depth: 4816 bytes left
[ 7.420043] init-early.sh used greatest stack depth: 4544 bytes left
[ 7.813118] NET: Registered protocol family 1
[ 7.851908] udevd used greatest stack depth: 4184 bytes left
[ 7.852122] udevd[784]: starting version 171
[ 7.946670] [drm] Initialized drm 1.1.0 20060810
[ 8.010601] [drm] radeon defaulting to kernel modesetting.
[ 8.010608] [drm] radeon kernel modesetting enabled.
[ 8.010680] radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.010694] radeon 0000:00:01.0: setting latency timer to 64
[ 8.011447] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x17AA:0x21DF).
[ 8.011569] [drm] register mmio base: 0xF0200000
[ 8.011573] [drm] register mmio size: 262144
[ 8.011898] ATOM BIOS: Lenovo
[ 8.011959] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 8.011965] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
[ 8.012305] [drm] Detected VRAM RAM=384M, BAR=256M
[ 8.012312] [drm] RAM width 32bits DDR
[ 8.012443] [TTM] Zone kernel: Available graphics memory: 2848504 kiB.
[ 8.012448] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 8.012452] [TTM] Initializing pool allocator.
[ 8.012519] [drm] radeon: 384M of VRAM memory ready
[ 8.012523] [drm] radeon: 512M of GTT memory ready.
[ 8.012559] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.012563] [drm] Driver supports precise vblank timestamp query.
[ 8.012625] radeon 0000:00:01.0: irq 45 for MSI/MSI-X
[ 8.012633] radeon 0000:00:01.0: radeon: using MSI.
[ 8.012683] [drm] radeon: irq initialized.
[ 8.012693] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 8.017771] [drm] Loading PALM Microcode
[ 8.037544] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 8.037553] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 8.037557] thinkpad_acpi: ThinkPad BIOS 8FET31WW (1.15 ), EC unknown
[ 8.037562] thinkpad_acpi: Lenovo ThinkPad X120e, model 0596CTO
[ 8.052859] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 8.053682] thinkpad_acpi: radio switch found; radios are enabled
[ 8.053705] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 8.059587] usbcore: registered new interface driver usbfs
[ 8.059618] usbcore: registered new interface driver hub
[ 8.064383] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.073745] usbcore: registered new device driver usb
[ 8.074840] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.074848] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
[ 8.082802] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 8.083422] Registered led device: tpacpi::power
[ 8.083465] Registered led device: tpacpi::standby
[ 8.083503] Registered led device: tpacpi::thinkvantage
[ 8.085702] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 8.118922] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[ 8.122080] cfg80211: Calling CRDA to update world regulatory domain
[ 8.165270] rtl8192ce 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.165286] rtl8192ce 0000:04:00.0: setting latency timer to 64
[ 8.266130] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 8.266544] radeon 0000:00:01.0: WB enabled
[ 8.274640] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 8.275206] rtlwifi: wireless switch is on
[ 8.284308] [drm] ring test succeeded in 1 usecs
[ 8.284610] [drm] radeon: ib pool ready.
[ 8.284742] [drm] ib test succeeded in 0 usecs
[ 8.289491] [drm] Radeon Display Connectors
[ 8.289498] [drm] Connector 0:
[ 8.289529] [drm] LVDS
[ 8.289533] [drm] HPD1
[ 8.289538] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 8.289542] [drm] Encoders:
[ 8.289545] [drm] LCD1: INTERNAL_UNIPHY
[ 8.289549] [drm] Connector 1:
[ 8.289551] [drm] HDMI-A
[ 8.289554] [drm] HPD2
[ 8.289558] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 8.289561] [drm] Encoders:
[ 8.289564] [drm] DFP1: INTERNAL_UNIPHY
[ 8.289567] [drm] Connector 2:
[ 8.289570] [drm] VGA
[ 8.289574] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 8.289577] [drm] Encoders:
[ 8.289580] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 8.289882] [drm] Internal thermal controller without fan control
[ 8.290394] [drm] radeon: power management initialized
[ 8.754918] [drm] fb mappable at 0xE0142000
[ 8.754924] [drm] vram apper at 0xE0000000
[ 8.754928] [drm] size 4325376
[ 8.754931] [drm] fb depth is 24
[ 8.754934] [drm] pitch is 5632
[ 8.755056] fbcon: radeondrmfb (fb0) is primary device
[ 9.274725] Console: switching to colour frame buffer device 195x54
[ 9.283076] fb0: radeondrmfb frame buffer device
[ 9.283080] drm: registered panic notifier
[ 9.283094] [drm] Initialized radeon 2.12.0 20080528 for 0000:00:01.0 on minor 0
[ 9.283266] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 9.283549] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.283668] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 9.283685] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 9.283705] ehci_hcd 0000:00:12.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
[ 9.283713] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
[ 9.283720] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 9.283766] QUIRK: Enable AMD PLL fix
[ 9.283829] ehci_hcd 0000:00:12.2: debug port 1
[ 9.283838] ehci_hcd 0000:00:12.2: reset command 0080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
[ 9.283850] ehci_hcd 0000:00:12.2: MWI active
[ 9.283854] ehci_hcd 0000:00:12.2: supports USB remote wakeup
[ 9.283872] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf024a500
[ 9.283880] ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 9.283890] ehci_hcd 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 9.289112] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 9.289195] usb usb1: default language 0x0409
[ 9.289208] usb usb1: udev 1, busnum 1, minor = 0
[ 9.289212] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.289217] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.289222] usb usb1: Product: EHCI Host Controller
[ 9.289225] usb usb1: Manufacturer: Linux 3.2.1-gentoo-r2 ehci_hcd
[ 9.289229] usb usb1: SerialNumber: 0000:00:12.2
[ 9.289380] usb usb1: usb_probe_device
[ 9.289387] usb usb1: configuration #1 chosen from 1 choice
[ 9.289408] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 9.289461] hub 1-0:1.0: usb_probe_interface
[ 9.289465] hub 1-0:1.0: usb_probe_interface - got id
[ 9.289470] hub 1-0:1.0: USB hub found
[ 9.289481] hub 1-0:1.0: 5 ports detected
[ 9.289485] hub 1-0:1.0: standalone hub
[ 9.289488] hub 1-0:1.0: no power switching (usb 1.0)
[ 9.289492] hub 1-0:1.0: individual port over-current protection
[ 9.289497] hub 1-0:1.0: power on to power good time: 20ms
[ 9.289506] hub 1-0:1.0: local power source is good
[ 9.289510] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 9.289737] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.289805] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 9.289821] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 9.289836] ehci_hcd 0000:00:13.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
[ 9.289843] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
[ 9.289850] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 9.289890] ehci_hcd 0000:00:13.2: debug port 1
[ 9.289898] ehci_hcd 0000:00:13.2: reset command 0080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
[ 9.289910] ehci_hcd 0000:00:13.2: MWI active
[ 9.289914] ehci_hcd 0000:00:13.2: supports USB remote wakeup
[ 9.289932] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf024a400
[ 9.289940] ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 9.289950] ehci_hcd 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 9.295034] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 9.295115] usb usb2: default language 0x0409
[ 9.295129] usb usb2: udev 1, busnum 2, minor = 128
[ 9.295134] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.295139] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.295144] usb usb2: Product: EHCI Host Controller
[ 9.295148] usb usb2: Manufacturer: Linux 3.2.1-gentoo-r2 ehci_hcd
[ 9.295152] usb usb2: SerialNumber: 0000:00:13.2
[ 9.295303] usb usb2: usb_probe_device
[ 9.295309] usb usb2: configuration #1 chosen from 1 choice
[ 9.295331] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 9.295381] hub 2-0:1.0: usb_probe_interface
[ 9.295385] hub 2-0:1.0: usb_probe_interface - got id
[ 9.295391] hub 2-0:1.0: USB hub found
[ 9.295403] hub 2-0:1.0: 5 ports detected
[ 9.295407] hub 2-0:1.0: standalone hub
[ 9.295410] hub 2-0:1.0: no power switching (usb 1.0)
[ 9.295414] hub 2-0:1.0: individual port over-current protection
[ 9.295419] hub 2-0:1.0: power on to power good time: 20ms
[ 9.295428] hub 2-0:1.0: local power source is good
[ 9.295432] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 9.318465] Disabling lock debugging due to kernel taint
[ 9.318520] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 9.341363] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.341371] ohci_hcd: block sizes: ed 80 td 96
[ 9.341487] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9.341605] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 9.341621] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 9.341641] ohci_hcd 0000:00:12.0: enabled AMD prefetch quirk
[ 9.341722] ohci_hcd 0000:00:12.0: created debug files
[ 9.341727] ohci_hcd 0000:00:12.0: supports USB remote wakeup
[ 9.341763] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0249000
[ 9.389119] ehci_hcd 0000:00:12.2: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 9.389129] hub 1-0:1.0: port 4: status 0501 change 0001
[ 9.396081] ohci_hcd 0000:00:12.0: OHCI controller state
[ 9.396112] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers
[ 9.396119] ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3
[ 9.396125] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0
[ 9.396132] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF
[ 9.396137] ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 9.396149] ohci_hcd 0000:00:12.0: hcca frame #0005
[ 9.396156] ohci_hcd 0000:00:12.0: roothub.a 02000205 POTPGT=2 NPS NDP=5(5)
[ 9.396162] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 9.396168] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE
[ 9.396174] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS
[ 9.396181] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS
[ 9.396187] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS
[ 9.396193] ohci_hcd 0000:00:12.0: roothub.portstatus [3] 0x00000100 PPS
[ 9.396199] ohci_hcd 0000:00:12.0: roothub.portstatus [4] 0x00000100 PPS
[ 9.396218] ehci_hcd 0000:00:13.2: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 9.396224] hub 2-0:1.0: port 2: status 0501 change 0001
[ 9.396241] ehci_hcd 0000:00:13.2: GetStatus port:5 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 9.396246] hub 2-0:1.0: port 5: status 0501 change 0001
[ 9.396281] usb usb3: default language 0x0409
[ 9.396294] usb usb3: udev 1, busnum 3, minor = 256
[ 9.396298] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.396303] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.396308] usb usb3: Product: OHCI Host Controller
[ 9.396311] usb usb3: Manufacturer: Linux 3.2.1-gentoo-r2 ohci_hcd
[ 9.396315] usb usb3: SerialNumber: 0000:00:12.0
[ 9.396591] usb usb3: usb_probe_device
[ 9.396598] usb usb3: configuration #1 chosen from 1 choice
[ 9.396615] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 9.396715] hub 3-0:1.0: usb_probe_interface
[ 9.396720] hub 3-0:1.0: usb_probe_interface - got id
[ 9.396725] hub 3-0:1.0: USB hub found
[ 9.396784] hub 3-0:1.0: 5 ports detected
[ 9.396788] hub 3-0:1.0: standalone hub
[ 9.396791] hub 3-0:1.0: no power switching (usb 1.0)
[ 9.396795] hub 3-0:1.0: global over-current protection
[ 9.396799] hub 3-0:1.0: power on to power good time: 4ms
[ 9.396808] hub 3-0:1.0: local power source is good
[ 9.396811] hub 3-0:1.0: no over-current condition exists
[ 9.396816] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 9.396966] ehci_hcd 0000:00:12.2: HS companion for 0000:00:12.0
[ 9.397073] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9.397174] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 9.397189] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 9.397206] ohci_hcd 0000:00:13.0: enabled AMD prefetch quirk
[ 9.397240] ohci_hcd 0000:00:13.0: created debug files
[ 9.397244] ohci_hcd 0000:00:13.0: supports USB remote wakeup
[ 9.397261] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0248000
[ 9.406366] [fglrx] Maximum main memory to use for locked dma buffers: 5373 MBytes.
[ 9.406462] [fglrx] vendor: 1002 device: 9802 count: 1
[ 9.407326] [fglrx] ioport: bar 1, base 0x4000, size: 0x100
[ 9.407342] radeon 0000:00:01.0: setting latency timer to 64
[ 9.408166] [fglrx] Kernel PAT support is enabled
[ 9.408209] [fglrx] module loaded - fglrx 8.91.4 [Oct 25 2011] with 1 minors
[ 9.452366] ohci_hcd 0000:00:13.0: OHCI controller state
[ 9.452393] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
[ 9.452402] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3
[ 9.452408] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
[ 9.452414] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
[ 9.452420] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 9.452432] ohci_hcd 0000:00:13.0: hcca frame #0005
[ 9.452439] ohci_hcd 0000:00:13.0: roothub.a 02000205 POTPGT=2 NPS NDP=5(5)
[ 9.452445] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 9.452451] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
[ 9.452458] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
[ 9.452464] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
[ 9.452471] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
[ 9.452477] ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
[ 9.452483] ohci_hcd 0000:00:13.0: roothub.portstatus [4] 0x00000100 PPS
[ 9.452523] usb usb4: default language 0x0409
[ 9.452535] usb usb4: udev 1, busnum 4, minor = 384
[ 9.452540] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.452544] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.452549] usb usb4: Product: OHCI Host Controller
[ 9.452553] usb usb4: Manufacturer: Linux 3.2.1-gentoo-r2 ohci_hcd
[ 9.452556] usb usb4: SerialNumber: 0000:00:13.0
[ 9.452714] usb usb4: usb_probe_device
[ 9.452720] usb usb4: configuration #1 chosen from 1 choice
[ 9.452739] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 9.452788] hub 4-0:1.0: usb_probe_interface
[ 9.452793] hub 4-0:1.0: usb_probe_interface - got id
[ 9.452798] hub 4-0:1.0: USB hub found
[ 9.452811] hub 4-0:1.0: 5 ports detected
[ 9.452814] hub 4-0:1.0: standalone hub
[ 9.452818] hub 4-0:1.0: no power switching (usb 1.0)
[ 9.452821] hub 4-0:1.0: global over-current protection
[ 9.452826] hub 4-0:1.0: power on to power good time: 4ms
[ 9.452835] hub 4-0:1.0: local power source is good
[ 9.452839] hub 4-0:1.0: no over-current condition exists
[ 9.452843] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 9.453001] ehci_hcd 0000:00:13.2: HS companion for 0000:00:13.0
[ 9.455091] modprobe used greatest stack depth: 3248 bytes left
[ 9.489236] hub 1-0:1.0: state 7 ports 5 chg 0010 evt 0000
[ 9.489314] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[ 9.540382] ehci_hcd 0000:00:12.2: port 4 full speed --> companion
[ 9.540395] ehci_hcd 0000:00:12.2: GetStatus port:4 status 003801 0 ACK POWER OWNER sig=j CONNECT
[ 9.540445] hub 1-0:1.0: port 4 not reset yet, waiting 50ms
[ 9.591125] ehci_hcd 0000:00:12.2: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC
[ 9.591170] hub 2-0:1.0: state 7 ports 5 chg 0024 evt 0000
[ 9.591184] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 9.642182] ehci_hcd 0000:00:13.2: port 2 high speed
[ 9.642196] ehci_hcd 0000:00:13.2: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 9.694111] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[ 9.746120] ehci_hcd 0000:00:13.2: port 2 high speed
[ 9.746133] ehci_hcd 0000:00:13.2: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 9.817293] usb 2-2: default language 0x0409
[ 9.822048] usb 2-2: udev 2, busnum 2, minor = 129
[ 9.822057] usb 2-2: New USB device found, idVendor=0bda, idProduct=0158
[ 9.822062] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.822067] usb 2-2: Product: USB2.0-CRW
[ 9.822071] usb 2-2: Manufacturer: Generic
[ 9.822074] usb 2-2: SerialNumber: 20071114173400000
[ 9.822229] usb 2-2: usb_probe_device
[ 9.822236] usb 2-2: configuration #1 chosen from 1 choice
[ 9.825234] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
[ 9.828370] hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
[ 9.838598] uas 2-2:1.0: usb_probe_interface
[ 9.838607] uas 2-2:1.0: usb_probe_interface - got id
[ 9.838654] usbcore: registered new interface driver uas
[ 9.840441] libusual 2-2:1.0: usb_probe_interface
[ 9.840456] libusual 2-2:1.0: usb_probe_interface - got id
[ 9.840587] usbcore: registered new interface driver libusual
[ 9.842879] Initializing USB Mass Storage driver...
[ 9.842938] usb-storage 2-2:1.0: usb_probe_interface
[ 9.842949] usb-storage 2-2:1.0: usb_probe_interface - got id
[ 9.842996] usbcore: registered new interface driver usb-storage
[ 9.843018] USB Mass Storage support registered.
[ 9.843887] ums-realtek 2-2:1.0: usb_probe_interface
[ 9.843895] ums-realtek 2-2:1.0: usb_probe_interface - got id
[ 9.855404] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 1
[ 9.855642] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 2
[ 9.855889] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 3
[ 9.856143] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 4
[ 9.856392] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 5
[ 9.856641] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 6
[ 9.856888] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 7
[ 9.857142] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 8
[ 9.857391] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 9
[ 9.857640] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 10
[ 9.857888] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 11
[ 9.858141] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 12
[ 9.858391] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 13
[ 9.858640] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 14
[ 9.858887] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 15
[ 9.859141] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 16
[ 9.859390] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 17
[ 9.859640] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 18
[ 9.859888] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 19
[ 9.860141] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 20
[ 9.860391] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 21
[ 9.860640] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 22
[ 9.860889] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 23
[ 9.861141] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 24
[ 9.861390] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 25
[ 9.861640] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 26
[ 9.861888] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 27
[ 9.862141] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 28
[ 9.862391] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 29
[ 9.862640] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 30
[ 9.862887] ehci_hcd 0000:00:13.2: detected XactErr len 0/13 retry 31
[ 9.863141] ehci_hcd 0000:00:13.2: devpath 2 ep2in 3strikes
[ 9.863368] scsi1 : usb-storage 2-2:1.0
[ 9.863604] usbcore: registered new interface driver ums-realtek
[ 9.879257] ehci_hcd 0000:00:13.2: port 5 high speed
[ 9.879271] ehci_hcd 0000:00:13.2: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 9.930386] usb 2-5: new high-speed USB device number 3 using ehci_hcd
[ 9.984419] ehci_hcd 0000:00:13.2: port 5 high speed
[ 9.984432] ehci_hcd 0000:00:13.2: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 10.050780] usb 2-5: skipped 1 descriptor after configuration
[ 10.050795] usb 2-5: skipped 5 descriptors after interface
[ 10.050807] usb 2-5: skipped 1 descriptor after endpoint
[ 10.050817] usb 2-5: skipped 10 descriptors after interface
[ 10.051264] usb 2-5: default language 0x0409
[ 10.052389] usb 2-5: udev 3, busnum 2, minor = 130
[ 10.052399] usb 2-5: New USB device found, idVendor=04f2, idProduct=b1b4
[ 10.052409] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=2
[ 10.052417] usb 2-5: Product: Integrated Camera
[ 10.052424] usb 2-5: Manufacturer: Image Processor
[ 10.052431] usb 2-5: SerialNumber: Integrated Camera
[ 10.052602] usb 2-5: usb_probe_device
[ 10.052608] usb 2-5: configuration #1 chosen from 1 choice
[ 10.052902] usb 2-5: adding 2-5:1.0 (config #1, interface 0)
[ 10.053081] usb 2-5: adding 2-5:1.1 (config #1, interface 1)
[ 10.053186] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0010
[ 10.053205] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00010101 CSC PPS CCS
[ 10.053217] hub 3-0:1.0: port 4, status 0101, change 0001, 12 Mb/s
[ 10.065637] Linux video capture interface: v2.00
[ 10.068510] uvcvideo 2-5:1.0: usb_probe_interface
[ 10.068519] uvcvideo 2-5:1.0: usb_probe_interface - got id
[ 10.068562] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b1b4)
[ 10.070182] usbcore: registered new interface driver uvcvideo
[ 10.070186] USB Video Class driver (1.1.1)
[ 10.072984] usb 2-5: link qh512-0001/ffff8801983e5500 start 1 [1/0 us]
[ 10.073142] usb 2-5: unlink qh512-0001/ffff8801983e5500 start 1 [1/0 us]
[ 10.158372] hub 3-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x101
[ 10.180142] ohci_hcd 0000:00:12.0: port[3] reset timeout, stat 00000111
[ 10.231333] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
[ 10.282335] usb 3-4: new full-speed USB device number 2 using ohci_hcd
[ 10.304861] ohci_hcd 0000:00:12.0: port[3] reset timeout, stat 00000113
[ 10.355365] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
[ 10.430146] usb 3-4: skipped 1 descriptor after interface
[ 10.432162] usb 3-4: default language 0x0409
[ 10.438165] usb 3-4: udev 2, busnum 3, minor = 257
[ 10.438174] usb 3-4: New USB device found, idVendor=0a5c, idProduct=217f
[ 10.438184] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 10.438193] usb 3-4: Product: Broadcom Bluetooth Device
[ 10.438200] usb 3-4: Manufacturer: Broadcom Corp
[ 10.438207] usb 3-4: SerialNumber: E02A82F2FAD4
[ 10.438374] usb 3-4: usb_probe_device
[ 10.438381] usb 3-4: configuration #1 chosen from 1 choice
[ 10.440173] usb 3-4: adding 3-4:1.0 (config #1, interface 0)
[ 10.440352] usb 3-4: adding 3-4:1.1 (config #1, interface 1)
[ 10.440465] usb 3-4: adding 3-4:1.2 (config #1, interface 2)
[ 10.440595] usb 3-4: adding 3-4:1.3 (config #1, interface 3)
[ 10.441088] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0010
[ 10.441155] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0000
[ 10.441180] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0004
[ 10.441245] ehci_hcd 0000:00:13.2: GetStatus port:2 status 001002 0 ACK POWER sig=se0 CSC
[ 10.441257] hub 2-0:1.0: port 2, status 0100, change 0001, 12 Mb/s
[ 10.441264] usb 2-2: USB disconnect, device number 2
[ 10.441268] usb 2-2: unregistering device
[ 10.441272] usb 2-2: unregistering interface 2-2:1.0
[ 10.441610] usb 2-2: usb_disable_device nuking all URBs
[ 10.455676] Bluetooth: Core ver 2.16
[ 10.455718] NET: Registered protocol family 31
[ 10.455722] Bluetooth: HCI device and connection manager initialized
[ 10.455729] Bluetooth: HCI socket layer initialized
[ 10.455733] Bluetooth: L2CAP socket layer initialized
[ 10.455744] Bluetooth: SCO socket layer initialized
[ 10.460724] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.460763] btusb 3-4:1.0: usb_probe_interface
[ 10.460768] btusb 3-4:1.0: usb_probe_interface - got id
[ 10.461164] btusb 3-4:1.2: usb_probe_interface
[ 10.461170] btusb 3-4:1.2: usb_probe_interface - got id
[ 10.461189] btusb 3-4:1.3: usb_probe_interface
[ 10.461193] btusb 3-4:1.3: usb_probe_interface - got id
[ 10.461230] usbcore: registered new interface driver btusb
[ 10.545168] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
[ 10.545185] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0010
[ 10.774759] EXT4-fs (sda4): re-mounted. Opts: discard
[ 12.023105] r8169 0000:01:00.0: eth0: link down
[ 12.704409] usb 2-5: usb auto-suspend, wakeup 0
[ 12.704430] hub 1-0:1.0: hub_suspend
[ 12.704443] usb usb1: bus auto-suspend, wakeup 1
[ 12.704448] ehci_hcd 0000:00:12.2: suspend root hub
[ 12.705451] hub 4-0:1.0: hub_suspend
[ 12.705458] usb usb4: bus auto-suspend, wakeup 1
[ 12.705465] ohci_hcd 0000:00:13.0: suspend root hub
[ 14.599997] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 14.715068] hub 2-0:1.0: hub_suspend
[ 14.715090] usb usb2: bus auto-suspend, wakeup 1
[ 14.715095] ehci_hcd 0000:00:13.2: suspend root hub
[ 20.118329] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 21.453037] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 22.107079] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 22.556133] r8169 0000:01:00.0: eth0: link down
[ 22.601516] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 25.038837] NET: Registered protocol family 17
[ 25.060196] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 26.455030] wlan0: authenticate with c4:3d:c7:a8:67:cf (try 1)
[ 26.456806] wlan0: authenticated
[ 26.456868] wlan0: associate with c4:3d:c7:a8:67:cf (try 1)
[ 26.465344] wlan0: RX AssocResp from c4:3d:c7:a8:67:cf (capab=0x431 status=0 aid=1)
[ 26.465353] wlan0: associated