rendered paste body[4294667.296000] Linux version 2.6.15-23-686 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Tue May 23 14:03:07 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000d2000 - 00000000000d8000 (reserved)
[4294667.296000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
[4294667.296000] BIOS-e820: 000000001ff70000 - 000000001ff7b000 (ACPI data)
[4294667.296000] BIOS-e820: 000000001ff7b000 - 000000001ff80000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
[4294667.296000] BIOS-e820: 000000002ff80000 - 0000000030000000 (reserved)
[4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[4294667.296000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 511MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000f68f0
[4294667.296000] On node 0 totalpages: 130928
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 126832 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI present.
[4294667.296000] ATI board detected. Disabling timer routing over 8254.
[4294667.296000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6950
[4294667.296000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1ff75f3a
[4294667.296000] ACPI: FADT (v001 TOSCPL Chinook 0x06040000 ATI 0x00000003) @ 0x1ff7af24
[4294667.296000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1ff7af98
[4294667.296000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x1ff75f6a
[4294667.296000] ACPI: DSDT (v001 TOSCPL SB200 0x06040000 MSFT 0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x8008
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:4 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[4294667.296000] Processor #1 15:4 APIC version 20
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[4294667.296000] ACPI: BIOS IRQ0 pin2 override ignored.
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda6 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 3201.808 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294668.316000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294668.317000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294668.328000] Memory: 507128k/523712k available (2101k kernel code, 15932k reserved, 592k data, 332k init, 0k highmem)
[4294668.328000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294668.388000] Calibrating delay using timer specific routine.. 6403.05 BogoMIPS (lpj=3201527)
[4294668.388000] Security Framework v1.0.0 initialized
[4294668.388000] SELinux: Disabled at boot.
[4294668.388000] Mount-cache hash table entries: 512
[4294668.388000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
[4294668.388000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
[4294668.388000] monitor/mwait feature present.
[4294668.388000] using mwait in idle threads.
[4294668.388000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[4294668.388000] CPU: L2 cache: 1024K
[4294668.388000] CPU: Hyper-Threading is disabled
[4294668.388000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000459d 00000000 00000000
[4294668.388000] mtrr: v2.0 (20020519)
[4294668.388000] Enabling fast FPU save and restore... done.
[4294668.388000] Enabling unmasked SIMD FPU exception support... done.
[4294668.388000] Checking 'hlt' instruction... OK.
[4294668.392000] SMP alternatives: switching to UP code
[4294668.392000] checking if image is initramfs... it is
[4294668.861000] Freeing initrd memory: 6795k freed
[4294668.872000] ACPI: Looking for DSDT ... not found!
[4294668.878000] CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
[4294668.878000] SMP alternatives: switching to SMP code
[4294668.879000] Booting processor 1/1 eip 3000
[4294668.889000] Initializing CPU#1
[4294668.950000] Calibrating delay using timer specific routine.. 6399.36 BogoMIPS (lpj=3199681)
[4294668.950000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
[4294668.950000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
[4294668.950000] monitor/mwait feature present.
[4294668.950000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[4294668.950000] CPU: L2 cache: 1024K
[4294668.950000] CPU: Hyper-Threading is disabled
[4294668.950000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000459d 00000000 00000000
[4294668.950000] CPU1: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
[4294668.950000] Total of 2 processors activated (12802.41 BogoMIPS).
[4294668.950000] ENABLING IO-APIC IRQs
[4294668.950000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[4294669.061000] checking TSC synchronization across 2 CPUs: passed.
[4294669.062000] Brought up 2 CPUs
[4294669.062000] NET: Registered protocol family 16
[4294669.062000] EISA bus registered
[4294669.062000] ACPI: bus type pci registered
[4294669.062000] PCI: PCI BIOS revision 2.10 entry at 0xfd958, last bus=2
[4294669.062000] PCI: Using configuration type 1
[4294669.062000] ACPI: Subsystem revision 20051216
[4294669.065000] ACPI: Interpreter enabled
[4294669.065000] ACPI: Using IOAPIC for interrupt routing
[4294669.067000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294669.067000] PCI: Probing PCI hardware (bus 00)
[4294669.090000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[4294669.090000] Boot video device is 0000:01:05.0
[4294669.091000] PCI: Transparent bridge - 0000:00:14.4
[4294669.091000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294669.093000] ACPI: PCI Interrupt Link [LNK0] (IRQs 10 11) *0, disabled.
[4294669.094000] ACPI: PCI Interrupt Link [LNK1] (IRQs 10 11) *0, disabled.
[4294669.094000] ACPI: PCI Interrupt Link [LNK2] (IRQs 10 11) *0, disabled.
[4294669.094000] ACPI: PCI Interrupt Link [LNK3] (IRQs 10 11) *0, disabled.
[4294669.096000] ACPI: Embedded Controller [EC0] (gpe 6) interrupt mode.
[4294669.136000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[4294669.137000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[4294669.137000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294669.137000] pnp: PnP ACPI init
[4294669.160000] pnp: PnP ACPI: found 9 devices
[4294669.160000] PnPBIOS: Disabled by ACPI PNP
[4294669.160000] PCI: Using ACPI for IRQ routing
[4294669.160000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294669.166000] pnp: 00:06: ioport range 0x1080-0x1080 has been reserved
[4294669.166000] pnp: 00:06: ioport range 0x220-0x22f has been reserved
[4294669.166000] pnp: 00:06: ioport range 0x40b-0x40b has been reserved
[4294669.166000] pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
[4294669.166000] PCI: Bridge: 0000:00:01.0
[4294669.166000] IO window: 9000-9fff
[4294669.166000] MEM window: e8100000-e81fffff
[4294669.166000] PREFETCH window: f0000000-f7ffffff
[4294669.166000] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[4294669.166000] IO window: 0000a800-0000a8ff
[4294669.166000] IO window: 0000ac00-0000acff
[4294669.166000] PREFETCH window: 40000000-41ffffff
[4294669.166000] MEM window: 42000000-43ffffff
[4294669.166000] PCI: Bridge: 0000:00:14.4
[4294669.166000] IO window: a000-afff
[4294669.166000] MEM window: e8200000-e82fffff
[4294669.166000] PREFETCH window: 40000000-41ffffff
[4294669.166000] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 185
[4294669.167000] audit: initializing netlink socket (disabled)
[4294669.167000] audit(1161361561.165:1): initialized
[4294669.167000] VFS: Disk quotas dquot_6.5.1
[4294669.167000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294669.167000] Initializing Cryptographic API
[4294669.167000] io scheduler noop registered
[4294669.167000] io scheduler anticipatory registered
[4294669.167000] io scheduler deadline registered
[4294669.167000] io scheduler cfq registered
[4294669.167000] isapnp: Scanning for PnP cards...
[4294669.522000] isapnp: No Plug & Play device found
[4294669.542000] Real Time Clock Driver v1.12
[4294669.542000] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[4294670.554000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294670.555000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294670.555000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294670.558000] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 193
[4294670.558000] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[4294670.559000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294670.559000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294670.559000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294670.559000] mice: PS/2 mouse device common for all mice
[4294670.561000] EISA: Probing bus 0 at eisa.0
[4294670.561000] Cannot allocate resource for EISA slot 1
[4294670.561000] Cannot allocate resource for EISA slot 8
[4294670.561000] EISA: Detected 0 cards.
[4294670.561000] NET: Registered protocol family 2
[4294670.573000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
[4294670.573000] TCP established hash table entries: 32768 (order: 6, 393216 bytes)
[4294670.573000] TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
[4294670.573000] TCP: Hash tables configured (established 32768 bind 32768)
[4294670.573000] TCP reno registered
[4294670.573000] TCP bic registered
[4294670.573000] NET: Registered protocol family 1
[4294670.573000] NET: Registered protocol family 8
[4294670.573000] NET: Registered protocol family 20
[4294670.573000] Starting balanced_irq
[4294670.573000] Using IPI No-Shortcut mode
[4294670.573000] ACPI wakeup devices:
[4294670.573000] ELAN OHC1 OHC2 EHCI MODM
[4294670.573000] ACPI: (supports S0 S3 S4 S5)
[4294670.574000] Freeing unused kernel memory: 332k freed
[4294670.619000] vga16fb: initializing
[4294670.619000] vga16fb: mapped to 0xc00a0000
[4294670.731000] Console: switching to colour frame buffer device 80x25
[4294670.731000] fb0: VGA16 VGA frame buffer device
[4294671.168000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294671.168000] atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
[4294671.755000] Capability LSM initialized
[4294672.359000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[4294672.359000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 185
[4294672.359000] ATIIXP: chipset revision 0
[4294672.359000] ATIIXP: not 100% native mode: will probe irqs later
[4294672.359000] ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio
[4294672.359000] ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio
[4294672.359000] Probing IDE interface ide0...
[4294672.624000] hda: TOSHIBA MK1031GAS, ATA DISK drive
[4294673.236000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294673.262000] Probing IDE interface ide1...
[4294673.934000] hdc: MATSHITADVD-RAM UJ-831S, ATAPI CD/DVD-ROM drive
[4294674.242000] ide1 at 0x170-0x177,0x376 on irq 15
[4294674.257000] hda: max request size: 1024KiB
[4294674.257000] hda: 195371568 sectors (100030 MB), CHS=16383/255/63, UDMA(100)
[4294674.257000] hda: cache flushes supported
[4294674.257000] hda:<6>hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294674.258000] Uniform CD-ROM driver Revision: 3.20
[4294674.289000] hda1 hda2 < hda5 hda6 hda7 >
[4294676.197000] usbcore: registered new driver usbfs
[4294676.197000] usbcore: registered new driver hub
[4294676.202000] ieee1394: Initialized config rom entry `ip1394'
[4294676.204000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[4294676.204000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 201
[4294676.204000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[4294676.464000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[4294676.464000] ohci_hcd 0000:00:13.0: irq 201, io mem 0xe8001000
[4294676.520000] hub 1-0:1.0: USB hub found
[4294676.520000] hub 1-0:1.0: 3 ports detected
[4294676.621000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 201
[4294676.621000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[4294676.880000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[4294676.880000] ohci_hcd 0000:00:13.1: irq 201, io mem 0xe8002000
[4294676.935000] hub 2-0:1.0: USB hub found
[4294676.936000] hub 2-0:1.0: 3 ports detected
[4294677.037000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 201
[4294677.037000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[4294677.038000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[4294677.038000] ehci_hcd 0000:00:13.2: irq 201, io mem 0xe8003000
[4294677.038000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294677.038000] hub 3-0:1.0: USB hub found
[4294677.038000] hub 3-0:1.0: 6 ports detected
[4294677.060000] usb 1-1: new low speed USB device using ohci_hcd and address 2
[4294677.140000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[4294677.140000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 185
[4294677.140000] PCI: Via IRQ fixup for 0000:02:00.0, from 11 to 9
[4294677.194000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[e8210000-e82107ff] Max Packet=[2048]
[4294677.251000] Attempting manual resume
[4294677.260000] EXT3-fs: INFO: recovery required on readonly filesystem.
[4294677.260000] EXT3-fs: write access will be enabled during recovery.
[4294677.597000] usb 1-1: new low speed USB device using ohci_hcd and address 3
[4294677.747000] usbcore: registered new driver hiddev
[4294677.755000] input: USB Mouse as /class/input/input1
[4294677.755000] input: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:13.0-1
[4294677.755000] usbcore: registered new driver usbhid
[4294677.755000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294678.457000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f535b4021b7]
[4294681.039000] EXT3-fs: hda6: orphan cleanup on readonly fs
[4294681.039000] ext3_orphan_cleanup: deleting unreferenced inode 260667
[4294681.039000] ext3_orphan_cleanup: deleting unreferenced inode 260664
[4294681.039000] EXT3-fs: hda6: 2 orphan inodes deleted
[4294681.039000] EXT3-fs: recovery complete.
[4294681.039000] kjournald starting. Commit interval 5 seconds
[4294681.043000] EXT3-fs: mounted filesystem with ordered data mode.
[4294690.867000] ts: Compaq touchscreen protocol output
[4294692.468000] Linux agpgart interface v0.101 (c) Dave Jones
[4294692.494000] agpgart: Detected Ati IGP9100/M chipset
[4294692.523000] ath_hal: module license 'Proprietary' taints kernel.
[4294692.523000] ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
[4294692.541000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294692.577000] wlan: 0.8.6.0 (EXPERIMENTAL)
[4294692.580000] ath_rate_sample: 1.2
[4294692.637000] agpgart: AGP aperture is 64M @ 0xec000000
[4294692.637000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294692.638000] ath_pci: 0.9.6.0 (EXPERIMENTAL)
[4294692.638000] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 209
[4294692.726000] sdhci: Secure Digital Host Controller Interface driver, 0.10
[4294692.726000] sdhci: Copyright(c) Pierre Ossman
[4294693.086000] Build date: May 29 2006
[4294693.086000] Debugging version (IEEE80211)
[4294693.086000] ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[4294693.086000] ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[4294693.086000] ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[4294693.086000] ath0: H/W encryption support: WEP AES AES_CCM TKIP
[4294693.086000] ath0: mac 5.9 phy 4.3 radio 4.6
[4294693.086000] ath0: Use hw queue 1 for WME_AC_BE traffic
[4294693.086000] ath0: Use hw queue 0 for WME_AC_BK traffic
[4294693.086000] ath0: Use hw queue 2 for WME_AC_VI traffic
[4294693.086000] ath0: Use hw queue 3 for WME_AC_VO traffic
[4294693.086000] ath0: Use hw queue 8 for CAB traffic
[4294693.086000] ath0: Use hw queue 9 for beacons
[4294693.086000] Debugging version (ATH)
[4294693.086000] ath0: Atheros 5212: mem=0xe8200000, irq=209
[4294693.086000] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 185
[4294693.086000] Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff01]
[4294693.086000] Yenta: Using CSCINT to route CSC interrupts to PCI
[4294693.086000] Yenta: Routing CardBus interrupts to PCI
[4294693.086000] Yenta TI: socket 0000:02:04.0, mfunc 0x89501212, devctl 0x44
[4294693.157000] 8139too Fast Ethernet driver 0.9.27
[4294693.157000] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 201
[4294693.157000] eth0: RealTek RTL8139 at 0xe0a58800, 00:0f:b0:66:0d:4b, IRQ 201
[4294693.158000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[4294693.317000] Yenta: ISA IRQ mask 0x0a70, PCI irq 185
[4294693.317000] Socket status: 30000006
[4294693.317000] Yenta: Raising subordinate bus# of parent bus (#02) from #04 to #06
[4294693.317000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[4294693.317000] cs: IO port probe 0xa000-0xafff: clean.
[4294693.318000] pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff
[4294693.318000] pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x41ffffff
[4294693.343000] ACPI: PCI Interrupt 0000:02:04.2[B] -> GSI 17 (level, low) -> IRQ 193
[4294693.403000] sdhci: ============== REGISTER DUMP ==============
[4294693.403000] sdhci: Sys addr: 0x00000000 | Version: 0x00000000
[4294693.403000] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[4294693.403000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[4294693.403000] sdhci: Present: 0x01f20000 | Host ctl: 0x00000000
[4294693.403000] sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[4294693.403000] sdhci: Walk up: 0x00000000 | Clock: 0x00000000
[4294693.403000] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
[4294693.403000] sdhci: Int enab: 0x01ff00cf | Sig enab: 0x01ff00cf
[4294693.403000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[4294693.403000] sdhci: Caps: 0x01e021a1 | Max curr: 0x00000055
[4294693.403000] sdhci: ===========================================
[4294693.453000] mmc0: SDHCI at 0xe8211000 irq 193 DMA
[4294693.521000] input: PS/2 Mouse as /class/input/input2
[4294693.541000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[4294693.564000] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 193
[4294693.565000] atiixp: codec reset timeout
[4294693.579000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294693.581000] input: PC Speaker as /class/input/input4
[4294693.913000] cs: IO port probe 0x100-0x3af: clean.
[4294693.922000] cs: IO port probe 0x3e0-0x4ff: clean.
[4294693.923000] cs: IO port probe 0x820-0x8ff: clean.
[4294693.923000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7
[4294693.924000] cs: IO port probe 0xa00-0xaff: clean.
[4294694.080000] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 193
[4294694.242000] eth0: link down
[4294694.425000] lp: driver loaded but no devices found
[4294694.480000] SCSI subsystem initialized
[4294694.496000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[4294694.496000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[4294694.496000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294694.548000] fuse init (API version 7.3)
[4294694.590000] Adding 923696k swap on /dev/hda7. Priority:-1 extents:1 across:923696k
[4294694.654000] EXT3 FS on hda6, internal journal
[4294694.825000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294694.825000] md: bitmap version 4.39
[4294694.894000] NET: Registered protocol family 17
[4294695.302000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294701.652000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4294701.691000] ISOFS: changing to secondary root