rendered paste bodySerial Number: L40G6YYC
Firmware Version: YAH814Y0
User Capacity: 40,982,151,168 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 0
Local Time is: Sat Feb 4 18:57:06 2012 CST
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 118) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 30) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off supp ort.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 31) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 1
3 Spin_Up_Time 0x0027 221 221 063 Pre-fail Always - 9940
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 77
5 Reallocated_Sector_Ct 0x0033 240 001 063 Pre-fail Always In_th e_past 33
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 231 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 253 247 187 Pre-fail Always - 51371
9 Power_On_Minutes 0x0032 253 253 000 Old_age Always - 182h+07m
10 Spin_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 247 247 000 Old_age Always - 2540
196 Reallocated_Event_Count 0x0008 252 252 000 Old_age Offline - 1
197 Current_Pending_Sector 0x0008 232 001 000 Old_age Offline - 21
198 Offline_Uncorrectable 0x0008 252 252 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x0008 197 197 000 Old_age Offline - 6
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 16
202 Data_Address_Mark_Errs 0x000a 253 238 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 0
204 Soft_ECC_Correction 0x000a 253 249 000 Old_age Always - 0
205 Thermal_Asperity_Rate 0x000a 253 216 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 253 253 000 Old_age Offline - 0
96 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
97 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
98 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
SMART Error Log Version: 1
ATA Error Count: 4440 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4440 occurred at disk power-on lifetime: 162 hours (6 days + 18 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 42 9e 1b 40 e2 Error: ICRC, ABRT at LBA = 0x02401b9e = 37755806
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 00 e0 1a 40 e2 08 00:41:09.840 WRITE DMA
f8 00 00 00 00 00 e0 08 00:41:09.824 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 0a 00:41:09.824 IDENTIFY DEVICE
ef 03 44 00 00 00 a0 0a 00:41:09.824 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 08 00:41:09.824 READ NATIVE MAX ADDRESS
Error 4439 occurred at disk power-on lifetime: 162 hours (6 days + 18 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 3a a6 1b 40 e2 Error: ICRC, ABRT at LBA = 0x02401ba6 = 37755814
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 00 e0 1a 40 e2 08 00:41:09.536 WRITE DMA
ca 00 00 e0 19 40 e2 08 00:41:09.536 WRITE DMA
ca 00 30 c8 68 01 e3 08 00:41:09.536 WRITE DMA
ca 00 10 58 89 00 e3 08 00:41:09.536 WRITE DMA
ca 00 10 e8 cd ff e2 08 00:41:09.536 WRITE DMA
Error 4438 occurred at disk power-on lifetime: 162 hours (6 days + 18 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 00 e0 08 00:39:54.560 READ DMA
f8 00 00 00 00 00 e0 08 00:39:54.544 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 0a 00:39:54.528 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 0a 00:39:54.528 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 08 00:39:54.528 READ NATIVE MAX ADDRESS
Error 4437 occurred at disk power-on lifetime: 162 hours (6 days + 18 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 00 e0 08 00:39:54.368 READ DMA
f8 00 00 00 00 00 e0 08 00:39:54.192 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 0a 00:39:54.192 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 0a 00:39:54.192 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 08 00:39:54.192 READ NATIVE MAX ADDRESS
Error 4436 occurred at disk power-on lifetime: 162 hours (6 days + 18 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 05 01 00 00 a0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 05 01 00 00 a0 08 00:39:43.680 IDENTIFY PACKET DEVICE
ca 00 10 20 ca 00 e3 08 00:39:37.712 WRITE DMA
ca 00 08 48 89 00 e3 08 00:39:37.712 WRITE DMA
ca 00 10 08 09 00 e3 08 00:39:37.712 WRITE DMA
ca 00 08 18 08 00 e3 08 00:39:37.696 WRITE DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA _of_first_error
# 1 Short captive Completed: read failure 60% 41 293 0191
Device does not support Selective Self Tests/Logging