rendered paste bodyWelcome to PulseAudio! Use "help" for usage information.
>>> 4 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_06_00.0.analog-surround-51>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9059
volume: 0: 46% 1: 46% 2: 46% 3: 46% 4: 46% 5: 46%
0: -20.40 dB 1: -20.40 dB 2: -20.40 dB 3: -20.40 dB 4: -20.40 dB 5: -20.40 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 6ch 44100Hz
channel map: front-left,front-right,rear-left,rear-right,front-center,lfe
Surround 5.1
used by: 0
linked by: 0
fixed latency: 80.00 ms
card: 2 <alsa_card.pci-0000_06_00.0>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ADC Capture/Standard PCM Playback"
alsa.id = "emu10k1"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "SB Audigy 2 ZS [SB0360]"
alsa.long_card_name = "SB Audigy 2 ZS [SB0360] (rev.4, serial:0x20011102) at 0xa100, irq 16"
alsa.driver_name = "snd_emu10k1"
device.bus_path = "pci-0000:06:00.0"
sysfs.path = "/devices/pci0000:00/0000:00:1e.0/0000:06:00.0/sound/card0"
device.bus = "pci"
device.vendor.id = "1102"
device.vendor.name = "Creative Labs"
device.product.id = "0004"
device.product.name = "SB Audigy"
device.string = "surround51:0"
device.buffering.buffer_size = "42336"
device.buffering.fragment_size = "5292"
device.access_mode = "serial"
device.profile.name = "analog-surround-51"
device.profile.description = "Analogue Surround 5.1"
device.description = "SB Audigy Analogue Surround 5.1"
alsa.mixer_name = "SigmaTel STAC9750,51"
alsa.components = "AC97a:83847650"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output;output-amplifier-on: Analogue Output / Amplifier (priority 9910, available: unknown)
analog-output;output-amplifier-off: Analogue Output / No Amplifier (priority 9900, available: unknown)
active port: <analog-output;output-amplifier-on>
index: 1
name: <raop.Master-Airport.local>
driver: <module-raop-sink.c>
flags: NETWORK DECIBEL_VOLUME LATENCY
state: RUNNING
suspend cause:
priority: 0
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 1
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
fixed latency: 250.00 ms
module: 26
properties:
device.string = "[169.254.22.155]:5000"
device.intended_roles = "music"
device.description = "Master Airport"
device.icon_name = "audio-card"
index: 2
name: <raop.Family-Room-Speakers.local>
driver: <module-raop-sink.c>
flags: NETWORK DECIBEL_VOLUME LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 0
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 2
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 250.00 ms
module: 27
properties:
device.string = "[169.254.140.88]:5000"
device.intended_roles = "music"
device.description = "Family Room Speakers"
device.icon_name = "audio-card"
index: 3
name: <raop.Master-Base-Station.local>
driver: <module-raop-sink.c>
flags: NETWORK DECIBEL_VOLUME LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 0
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 3
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 250.00 ms
module: 28
properties:
device.string = "[169.254.39.172]:5000"
device.intended_roles = "music"
device.description = "Rumpus Room"
device.icon_name = "audio-card"