# df
Filesystem 1k-blocks Used Available Use% Mounted on
rootfs 6528 5452 1076 84% /
/dev/mtdblock4 6528 5452 1076 84% /
/dev/sda1 299681 18750 277837 6% /share/hdd/data
/dev/sda2 123923 4142 118502 3% /share/hdd/conf
# ./dmesg
Linux version 2.4.22-xfs (unslung@unslung.org) (gcc version 3.4.4) #1 Sun Jun 12
21:17:17 PDT 2005
CPU: XScale-IXP425/IXC1100 revision 1
Machine: Intel IXDP425 Development Platform
Warning: bad configuration page, trying to continue
Security risk: creating user accessible mapping for 0x60000000 at 0xff00f000
Security risk: creating user accessible mapping for 0x51000000 at 0xf1000000
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,115200n8 root=/dev/mtdblock4 rootfstype=jffs2
rw init=/linuxrc mem=32M@0x00000000
Relocating machine vectors to 0xffff0000
Calibrating delay loop... 131.48 BogoMIPS
Memory: 32MB = 32MB total
Memory: 30276KB available (1582K code, 274K data, 244K init)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
PCI Autoconfig: Found Bus 0, Device 1, Function 0
PCI Autoconfig: BAR 0, Mem, size=0x1000, address=0x4bfff000
PCI Autoconfig: Found Bus 0, Device 1, Function 1
PCI Autoconfig: BAR 0, Mem, size=0x1000, address=0x4bffe000
PCI Autoconfig: Found Bus 0, Device 1, Function 2
PCI Autoconfig: BAR 0, Mem, size=0x100, address=0x4bffdf00
PCI: bus0: Fast back to back transfers disabled
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module version 2.6.1 (20010830)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0xff000003 (irq = 15) is a XScale UART
ttyS01 at 0xff001003 (irq = 13) is a XScale UART
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
SCSI subsystem driver Revision: 1.00
* host:<NULL>
IXP425 Flash: Found an alias at 0x800000 for the chip at 0x0
cfi_cmdset_0001: Erase suspend on write enabled
0: offset=0x0,size=0x20000,blocks=64
Using buffer write method
Creating 6 MTD partitions on "IXP425 Flash":
0x00000000-0x00040000 : "RedBoot"
0x00040000-0x00060000 : "SysConf"
0x00060000-0x00160000 : "Kernel"
0x00160000-0x00180000 : "Ramdisk"
0x00180000-0x007e0000 : "Flashdisk"
0x007e0000-0x00800000 : "FIS directory"
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
pci probe begin
ehci_hcd 00:01.2: NEC Corporation USB 2.0
ehci_hcd 00:01.2: irq 26, pci mem c3872f00
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:01.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:01.2 PCI cache line size corrected to 32.
ehci_hcd 00:01.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 5 ports detected
pci probe ok
host/usb-uhci.c: $Revision: 1.1 $ time 21:18:46 Jun 12 2005
host/usb-uhci.c: High bandwidth mode enabled
host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
host/usb-ohci.c: USB OHCI at membase 0xc387a000, IRQ 28
host/usb-ohci.c: usb-00:01.0, NEC Corporation USB
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
host/usb-ohci.c: USB OHCI at membase 0xc3880000, IRQ 27
host/usb-ohci.c: usb-00:01.1, NEC Corporation USB (#2)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
i2c-dev.o: Registered 'IXP425 I2C Adapter' as minor 0
i2c-core.o: adapter IXP425 I2C Adapter registered as adapter 0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: No network devices available.
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 244K
hub.c: new USB device 00:01.2-1, assigned address 2
Protocol: Transparent SCSI
before kernel thread
*** detect:usb-storage
* scsi_register: usb-storage-1,
* scsi_reg, hostno:1 prot is 49
* scsi_reg, retval->host_no:1
scsi1 : SCSI emulation for USB Mass Storage devices
! scan_scsis
*** 49
31 port connect!!!!!
Vendor: Memorex Model: TD 2C Rev: 1.04
Type: Direct-Access ANSI SCSI revision: 02
the host no is 1
* sd_attach:0
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 1003520 512-byte hdwr sectors (514 MB)
sda: Write Protect is off
Partition check:
/dev/scsi/host1/bus0/target0/lun0: p1 p2 p3
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
Module init.
ixp425_eth:
Initializing IXP425 NPE Ethernet driver software v. 1.1
ixp425_eth: CPU clock speed (approx) = 0 MHz
[error] ixEthMiiPhyScan : unexpected Mii PHY ID 00008201
ixp425_eth: ixp0 is using the PHY at address 1
ixp425_eth: ixp1 is using the PHY at address 0
ixp425_eth: ixEthMiiLinkStatus failed on PHY0.
Can't determine
the auto negotiated parameters. Using default values.
enable_irq(22) unbalanced from c39451bc
X1226: I2C based RTC driver.
i2c-core.o: driver X1226 registered.
X1226: found X1226 on IXP425 I2C Adapter
i2c-core.o: client [X1226] registered to adapter [IXP425 I2C Adapter](pos. 0).
atr is 20
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 63980k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal