rendered paste body Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Syslinux MBR (3.00-3.35) is installed in the MBR of /dev/sda.
=> MS-DOS 3.30 through Windows 95 (A) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Unknown
Boot sector info: According to the info in the boot sector, sda1 starts
at sector 0. But according to the info from fdisk,
sda1 starts at sector 40.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: hfsplus
Boot sector type: -
Boot sector info:
Mounting failed: mount: wrong fs type, bad option, bad superblock on /dev/sda2,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
sda3: __________________________________________________________________________
File system: ext3
Boot sector type: Grub Legacy
Boot sector info: Grub Legacy (v0.97-71.fc15) is installed in the boot
sector of sda3 and looks at sector 210708480 on boot
drive #1 for the stage2 file. A stage2 file is at
this location on /dev/sda. Stage2 looks on partition
#3 for /grub/grub.conf.
Operating System:
Boot files: /grub/menu.lst /grub/grub.conf
sda4: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Fedora release 16 (Verne)
Kernel on an ()
Boot files: /boot/grub/menu.lst /boot/grub/grub.conf /etc/fstab
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT16
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 488,397,167 488,397,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 40 409,639 409,600 EFI System partition
/dev/sda2 409,640 209,756,695 209,347,056 Hierarchical File System Plus (HFS+) partition (Mac OS X)
/dev/sda3 209,758,208 211,806,207 2,048,000 EFI System partition
/dev/sda4 211,806,208 252,766,207 40,960,000 Data partition (Windows/Linux)
/dev/sda5 252,766,208 258,910,207 6,144,000 Swap partition (Linux)
/dev/sda6 258,910,208 488,396,799 229,486,592 Data partition (Windows/Linux)
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 65 MB, 65536000 bytes
16 heads, 32 sectors/track, 250 cylinders, total 128000 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 32 127,487 127,456 6 FAT16
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 b48c5c4e-b2a5-49ed-a587-38396ffed6b9 ext4 Anaconda
/dev/loop2 DM_snapshot_cow
/dev/mapper/live-rw b48c5c4e-b2a5-49ed-a587-38396ffed6b9 ext4 Anaconda
/dev/sda1 826A-0900 vfat EFI
/dev/sda2 4dac2b97-1f07-3599-8418-e6030297edc3 hfsplus Untitled 1
/dev/sda3 23a78827-34da-429e-a26c-3e4779e7c647 ext3
/dev/sda4 27ed4a71-0035-4efd-9b3e-745e82a22711 ext4 _Fedora-15-Beta-
/dev/sda5 d1ee2c24-1981-44b2-84c6-3f8bfaa8752b swap
/dev/sda6 2cbab2bb-5253-4821-97b7-c72b0f03c2b3 ext4
/dev/sdb1 1856-2A63 vfat
========================= "ls -R /dev/mapper/" output: =========================
/dev/mapper:
control
live-rw
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/devpts /mnt/sysimage/dev/pts devpts (rw,relatime,seclabel,gid=5,mode=620,ptmxmode=000)
/dev/mapper/live-rw / ext4 (rw,relatime,seclabel,user_xattr,acl,barrier=1,data=ordered)
/dev/proc /mnt/sysimage/proc proc (rw,relatime)
/dev/sda1 /mnt/sysimage/boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=cp437,iocharset=ascii,shortname=winnt,errors=remount-ro)
/dev/sda3 /mnt/sysimage/boot ext3 (rw,relatime,seclabel,user_xattr,barrier=1,nodelalloc,data=ordered)
/dev/sda4 /mnt/sysimage ext4 (rw,relatime,seclabel,user_xattr,barrier=1,data=ordered)
/dev/sda6 /mnt/sysimage/home ext4 (rw,relatime,seclabel,user_xattr,barrier=1,data=ordered)
/dev/sdb1 /mnt/usb vfat (rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=ascii,shortname=mixed,errors=remount-ro)
/dev/selinuxfs /mnt/sysimage/sys/fs/selinux selinuxfs (rw,relatime)
/dev/sysfs /mnt/sysimage/sys sysfs (rw,relatime,seclabel)
/dev/tmpfs /mnt/sysimage/dev/shm tmpfs (rw,relatime,rootcontext=system_u:object_r:tmpfs_t:s0,seclabel)
/dev/usbfs /mnt/sysimage/proc/bus/usb usbfs (rw,relatime)
============================= sda3/grub/grub.conf: =============================
--------------------------------------------------------------------------------
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,2)
# kernel /vmlinuz-version ro root=/dev/sda4
# initrd /initrd-[generic-]version.img
#boot=/dev/sda3
timeout=0
splashimage=(hd0,2)/grub/splash.xpm.gz
hiddenmenu
title Upgrade to Fedora 16 Branched Pre-release (Verne)
kernel /upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade ks=hd:UUID=23a78827-34da-429e-a26c-3e4779e7c647:/upgrade/ks.cfg
initrd /upgrade/initrd.img
--------------------------------------------------------------------------------
=================== sda3: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
100.523002625 = 107.935752192 grub/grub.conf 1
100.523002625 = 107.935752192 grub/menu.lst 1
100.473754883 = 107.882872832 grub/stage2 2
100.640373230 = 108.061777920 initramfs-3.1.0-7.fc16.x86_64.img 9
100.522808075 = 107.935543296 initrd-plymouth.img 5
100.522991180 = 107.935739904 vmlinuz-3.1.0-7.fc16.x86_64 7
================= sda3: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
100.639652252 = 108.061003776 extlinux/cat.c32 2
100.639671326 = 108.061024256 extlinux/chain.c32 1
100.639675140 = 108.061028352 extlinux/cmd.c32 1
100.639682770 = 108.061036544 extlinux/config.c32 1
100.639690399 = 108.061044736 extlinux/cpuid.c32 1
100.639701843 = 108.061057024 extlinux/cpuidtest.c32 1
100.639709473 = 108.061065216 extlinux/disk.c32 1
100.639743805 = 108.061102080 extlinux/dmitest.c32 1
100.639774323 = 108.061134848 extlinux/elf.c32 1
100.639804840 = 108.061167616 extlinux/ethersel.c32 1
100.639827728 = 108.061192192 extlinux/gfxboot.c32 1
100.639831543 = 108.061196288 extlinux/gpxecmd.c32 1
100.639892578 = 108.061261824 extlinux/hdt.c32 4
100.522472382 = 107.935182848 extlinux/host.c32 1
100.522491455 = 107.935203328 extlinux/ifcpu.c32 1
100.522495270 = 107.935207424 extlinux/ifcpu64.c32 1
100.522499084 = 107.935211520 extlinux/ifplop.c32 1
100.522510529 = 107.935223808 extlinux/kbdmap.c32 1
100.522529602 = 107.935244288 extlinux/linux.c32 1
100.522541046 = 107.935256576 extlinux/ls.c32 1
100.522602081 = 107.935322112 extlinux/lua.c32 3
100.522636414 = 107.935358976 extlinux/mboot.c32 1
100.522678375 = 107.935404032 extlinux/meminfo.c32 1
100.522735596 = 107.935465472 extlinux/menu.c32 1
100.639926910 = 108.061298688 extlinux/pcitest.c32 1
100.639942169 = 108.061315072 extlinux/pmload.c32 1
100.639949799 = 108.061323264 extlinux/pwd.c32 1
100.639957428 = 108.061331456 extlinux/reboot.c32 1
100.639980316 = 108.061356032 extlinux/rosh.c32 1
100.639984131 = 108.061360128 extlinux/sanboot.c32 1
100.640010834 = 108.061388800 extlinux/sdi.c32 1
100.640052795 = 108.061433856 extlinux/sysdump.c32 1
100.640060425 = 108.061442048 extlinux/vesainfo.c32 1
100.640121460 = 108.061507584 extlinux/vesamenu.c32 2
100.522743225 = 107.935473664 extlinux/vpdtest.c32 1
100.522747040 = 107.935477760 extlinux/whichsys.c32 1
============== sda3: Version of COM32(R) files used by Syslinux: ===============
extlinux/cat.c32 : COM32R module (v4.xx)
extlinux/chain.c32 : COM32R module (v4.xx)
extlinux/cmd.c32 : COM32R module (v4.xx)
extlinux/config.c32 : COM32R module (v4.xx)
extlinux/cpuid.c32 : COM32R module (v4.xx)
extlinux/cpuidtest.c32 : COM32R module (v4.xx)
extlinux/disk.c32 : COM32R module (v4.xx)
extlinux/dmitest.c32 : COM32R module (v4.xx)
extlinux/elf.c32 : COM32R module (v4.xx)
extlinux/ethersel.c32 : COM32R module (v4.xx)
extlinux/gfxboot.c32 : COM32R module (v4.xx)
extlinux/gpxecmd.c32 : COM32R module (v4.xx)
extlinux/hdt.c32 : COM32R module (v4.xx)
extlinux/host.c32 : COM32R module (v4.xx)
extlinux/ifcpu.c32 : COM32R module (v4.xx)
extlinux/ifcpu64.c32 : COM32R module (v4.xx)
extlinux/ifplop.c32 : COM32R module (v4.xx)
extlinux/kbdmap.c32 : COM32R module (v4.xx)
extlinux/linux.c32 : COM32R module (v4.xx)
extlinux/ls.c32 : COM32R module (v4.xx)
extlinux/lua.c32 : COM32R module (v4.xx)
extlinux/mboot.c32 : COM32R module (v4.xx)
extlinux/meminfo.c32 : COM32R module (v4.xx)
extlinux/menu.c32 : COM32R module (v4.xx)
extlinux/pcitest.c32 : COM32R module (v4.xx)
extlinux/pmload.c32 : COM32R module (v4.xx)
extlinux/pwd.c32 : COM32R module (v4.xx)
extlinux/reboot.c32 : COM32R module (v4.xx)
extlinux/rosh.c32 : COM32R module (v4.xx)
extlinux/sanboot.c32 : COM32R module (v4.xx)
extlinux/sdi.c32 : COM32R module (v4.xx)
extlinux/sysdump.c32 : COM32R module (v4.xx)
extlinux/vesainfo.c32 : COM32R module (v4.xx)
extlinux/vesamenu.c32 : COM32R module (v4.xx)
extlinux/vpdtest.c32 : COM32R module (v4.xx)
extlinux/whichsys.c32 : COM32R module (v4.xx)
========================== sda4/boot/grub/grub.conf: ===========================
--------------------------------------------------------------------------------
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,2)
# kernel /vmlinuz-version ro root=/dev/sda4
# initrd /initrd-[generic-]version.img
#boot=/dev/sda3
timeout=0
splashimage=(hd0,2)/grub/splash.xpm.gz
hiddenmenu
title Upgrade to Fedora 16 Branched Pre-release (Verne)
kernel /upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade ks=hd:UUID=23a78827-34da-429e-a26c-3e4779e7c647:/upgrade/ks.cfg
initrd /upgrade/initrd.img
--------------------------------------------------------------------------------
=============================== sda4/etc/fstab: ================================
--------------------------------------------------------------------------------
#
# /etc/fstab
# Created by anaconda on Sat May 7 19:00:15 2011
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=27ed4a71-0035-4efd-9b3e-745e82a22711 / ext4 defaults 1 1
UUID=23a78827-34da-429e-a26c-3e4779e7c647 /boot ext3 defaults 1 2
UUID=826A-0900 /boot/efi vfat umask=0077,shortname=winnt 0 0
UUID=2cbab2bb-5253-4821-97b7-c72b0f03c2b3 /home ext4 defaults 1 2
UUID=d1ee2c24-1981-44b2-84c6-3f8bfaa8752b swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
--------------------------------------------------------------------------------
=================== sda4: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
101.499565125 = 108.984328192 boot/grub/grub.conf 1
101.499565125 = 108.984328192 boot/grub/menu.lst 1
101.450317383 = 108.931448832 boot/grub/stage2 2
101.616935730 = 109.110353920 boot/initramfs-3.1.0-7.fc16.x86_64.img 9
101.499370575 = 108.984119296 boot/initrd-plymouth.img 5
101.499553680 = 108.984315904 boot/vmlinuz-3.1.0-7.fc16.x86_64 7
================= sda4: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
101.616214752 = 109.109579776 boot/extlinux/cat.c32 2
101.616233826 = 109.109600256 boot/extlinux/chain.c32 1
101.616237640 = 109.109604352 boot/extlinux/cmd.c32 1
101.616245270 = 109.109612544 boot/extlinux/config.c32 1
101.616252899 = 109.109620736 boot/extlinux/cpuid.c32 1
101.616264343 = 109.109633024 boot/extlinux/cpuidtest.c32 1
101.616271973 = 109.109641216 boot/extlinux/disk.c32 1
101.616306305 = 109.109678080 boot/extlinux/dmitest.c32 1
101.616336823 = 109.109710848 boot/extlinux/elf.c32 1
101.616367340 = 109.109743616 boot/extlinux/ethersel.c32 1
101.616390228 = 109.109768192 boot/extlinux/gfxboot.c32 1
101.616394043 = 109.109772288 boot/extlinux/gpxecmd.c32 1
101.616455078 = 109.109837824 boot/extlinux/hdt.c32 4
101.499034882 = 108.983758848 boot/extlinux/host.c32 1
101.499053955 = 108.983779328 boot/extlinux/ifcpu.c32 1
101.499057770 = 108.983783424 boot/extlinux/ifcpu64.c32 1
101.499061584 = 108.983787520 boot/extlinux/ifplop.c32 1
101.499073029 = 108.983799808 boot/extlinux/kbdmap.c32 1
101.499092102 = 108.983820288 boot/extlinux/linux.c32 1
101.499103546 = 108.983832576 boot/extlinux/ls.c32 1
101.499164581 = 108.983898112 boot/extlinux/lua.c32 3
101.499198914 = 108.983934976 boot/extlinux/mboot.c32 1
101.499240875 = 108.983980032 boot/extlinux/meminfo.c32 1
101.499298096 = 108.984041472 boot/extlinux/menu.c32 1
101.616489410 = 109.109874688 boot/extlinux/pcitest.c32 1
101.616504669 = 109.109891072 boot/extlinux/pmload.c32 1
101.616512299 = 109.109899264 boot/extlinux/pwd.c32 1
101.616519928 = 109.109907456 boot/extlinux/reboot.c32 1
101.616542816 = 109.109932032 boot/extlinux/rosh.c32 1
101.616546631 = 109.109936128 boot/extlinux/sanboot.c32 1
101.616573334 = 109.109964800 boot/extlinux/sdi.c32 1
101.616615295 = 109.110009856 boot/extlinux/sysdump.c32 1
101.616622925 = 109.110018048 boot/extlinux/vesainfo.c32 1
101.616683960 = 109.110083584 boot/extlinux/vesamenu.c32 2
101.499305725 = 108.984049664 boot/extlinux/vpdtest.c32 1
101.499309540 = 108.984053760 boot/extlinux/whichsys.c32 1
============== sda4: Version of COM32(R) files used by Syslinux: ===============
boot/extlinux/cat.c32 : COM32R module (v4.xx)
boot/extlinux/chain.c32 : COM32R module (v4.xx)
boot/extlinux/cmd.c32 : COM32R module (v4.xx)
boot/extlinux/config.c32 : COM32R module (v4.xx)
boot/extlinux/cpuid.c32 : COM32R module (v4.xx)
boot/extlinux/cpuidtest.c32 : COM32R module (v4.xx)
boot/extlinux/disk.c32 : COM32R module (v4.xx)
boot/extlinux/dmitest.c32 : COM32R module (v4.xx)
boot/extlinux/elf.c32 : COM32R module (v4.xx)
boot/extlinux/ethersel.c32 : COM32R module (v4.xx)
boot/extlinux/gfxboot.c32 : COM32R module (v4.xx)
boot/extlinux/gpxecmd.c32 : COM32R module (v4.xx)
boot/extlinux/hdt.c32 : COM32R module (v4.xx)
boot/extlinux/host.c32 : COM32R module (v4.xx)
boot/extlinux/ifcpu.c32 : COM32R module (v4.xx)
boot/extlinux/ifcpu64.c32 : COM32R module (v4.xx)
boot/extlinux/ifplop.c32 : COM32R module (v4.xx)
boot/extlinux/kbdmap.c32 : COM32R module (v4.xx)
boot/extlinux/linux.c32 : COM32R module (v4.xx)
boot/extlinux/ls.c32 : COM32R module (v4.xx)
boot/extlinux/lua.c32 : COM32R module (v4.xx)
boot/extlinux/mboot.c32 : COM32R module (v4.xx)
boot/extlinux/meminfo.c32 : COM32R module (v4.xx)
boot/extlinux/menu.c32 : COM32R module (v4.xx)
boot/extlinux/pcitest.c32 : COM32R module (v4.xx)
boot/extlinux/pmload.c32 : COM32R module (v4.xx)
boot/extlinux/pwd.c32 : COM32R module (v4.xx)
boot/extlinux/reboot.c32 : COM32R module (v4.xx)
boot/extlinux/rosh.c32 : COM32R module (v4.xx)
boot/extlinux/sanboot.c32 : COM32R module (v4.xx)
boot/extlinux/sdi.c32 : COM32R module (v4.xx)
boot/extlinux/sysdump.c32 : COM32R module (v4.xx)
boot/extlinux/vesainfo.c32 : COM32R module (v4.xx)
boot/extlinux/vesamenu.c32 : COM32R module (v4.xx)
boot/extlinux/vpdtest.c32 : COM32R module (v4.xx)
boot/extlinux/whichsys.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda1
00000000 eb 58 90 42 53 44 20 20 34 2e 34 00 02 01 20 00 |.X.BSD 4.4... .|
00000010 02 00 00 00 00 f0 00 00 20 00 10 00 00 00 00 00 |........ .......|
00000020 00 40 06 00 4f 0c 00 00 00 00 00 00 02 00 00 00 |.@..O...........|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 00 00 29 00 09 6a 82 45 46 49 20 20 20 20 20 20 |..)..j.EFI |
00000050 20 20 46 41 54 33 32 20 20 20 fa 31 c0 8e d0 bc | FAT32 .1....|
00000060 00 7c fb 8e d8 e8 00 00 5e 83 c6 19 bb 07 00 fc |.|......^.......|
00000070 ac 84 c0 74 06 b4 0e cd 10 eb f5 30 e4 cd 16 cd |...t.......0....|
00000080 19 0d 0a 4e 6f 6e 2d 73 79 73 74 65 6d 20 64 69 |...Non-system di|
00000090 73 6b 0d 0a 50 72 65 73 73 20 61 6e 79 20 6b 65 |sk..Press any ke|
000000a0 79 20 74 6f 20 72 65 62 6f 6f 74 0d 0a 00 00 00 |y to reboot.....|
000000b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
No volume groups found
mdadm: No arrays found in config file or automatically