# This is a sample ~/.gammurc file.
# In Unix/Linux copy it into your home directory and name it .gammurc
# or into /etc and name it gammurc
# In Win32 copy it into directory with Gammu.exe and name gammurc
# More about parameters later
# -----------------------------------------------------------------------------
[gammu]
port = com8:
#model = 6110
connection = fbusblue
#synchronizetime = yes
#logfile = gammulog
#logformat = textall
#use_locking = yes
#gammuloc = locfile
#startinfo = yes
#gammucoding = utf8
#rsslevel = teststable
#usephonedb = yes
[gammu1]
port = com8:
#model = 6110
connection = fbusblue
#synchronizetime = yes
#logfile = gammulog
#logformat = textall
#use_locking = yes
#gammuloc = locfile
#startinfo = yes
#gammucoding = utf8
# Step 1. Please find required Connection parameter and look into assigned
# with it port type. With some Connection you must set concrete model
# ================================================================ cables =====
# New Nokia protocol for FBUS/DAU9P
# Connection "fbus", port type serial
# New Nokia protocol for DLR3/DLR3P
# Connection "fbusdlr3"/"dlr3", port type serial
# New Nokia protocol for DKU2 (and phone with USB converter on phone mainboard
# like 6230)
# Connection "dku2phonet"/"dku2", port type dku2
# New Nokia protocol for DKU5 (and phone without USB converter on phone
# mainboard like 5100)
# Connection "dku5fbus"/"dku5", port type dku5
# New Nokia protocol for PL2303 USB cable (and phone without USB converter
# on phone mainboard like 5100)
# Connection "fbuspl2303", port type usb
# Old Nokia protocol for MBUS/DAU9P
# Connection "mbus", port type serial
# -----------------------------------------------------------------------------
# AT commands for DLR3, DKU5 or other AT compatible cable (8 bits, None
# parity, no flow control, 1 stop bit). Used with Nokia, Alcatel, Siemens, etc.
# Connection "at19200"/"at115200"/.., port type serial
# AT commands for DKU2 cable
# Connection "dku2at", port type dku2
# ============================================================== infrared =====
# Nokia protocol for infrared with Nokia 6110/6130/6150
# Connection "fbusirda"/"infrared", port type serial
# Nokia protocol for infrared with other Nokia models
# Connection "irdaphonet"/"irda", port type irda
# -----------------------------------------------------------------------------
# AT commands for infrared. Used with Nokia, Alcatel, Siemens, etc.
# Connection "irdaat", port type irda
# -----------------------------------------------------------------------------
# OBEX for infrared
# Connection "irdaobex", port type irda. Must be used with model "obex"
# ============================================================= Bluetooth =====
# Nokia protocol with serial port set in BT stack (WidComm, other) from
# adequate service and Nokia 6210
# Connection "fbusblue", port type serial
# Nokia protocol with serial port set in BT stack (WidComm, other) from
# adequate service and other Nokia models
# Connection "phonetblue", port type serial
# -----------------------------------------------------------------------------
# Nokia protocol for Bluetooth stack with Nokia 6210
# Connection "bluerffbus", port type BT
# Nokia protocol for Bluetooth stack with DCT4 Nokia models, which don't inform
# about services correctly (6310, 6310i with firmware lower than 5.50, 8910,..)
# Connection "bluerfphonet", port type BT
# Nokia protocol for Bluetooth stack with other DCT4 Nokia models
# Connection "bluephonet", port type BT
# -----------------------------------------------------------------------------
# AT commands for Bluetooth stack and 6210 / DCT4 Nokia models, which don't
# inform about BT services correctly (6310, 6310i with firmware lower
# than 5.50, 8910,..)
# Connection "bluerfat", port type BT
# AT commands for Bluetooth stack with other phones (Siemens, other Nokia,etc.)
# Connection "blueat", port type BT
# -----------------------------------------------------------------------------
# OBEX for Bluetooth stack with DCT4 Nokia models, which don't inform about
# BT services correctly (6310, 6310i with firmware lower than 5.50, 8910,...)
# Connection "bluerfobex", port type BT
# OBEX for Bluetooth stack with other phones (Siemens, other Nokia, etc.)
# Connection "blueobex", port type BT. Must be used with model "obex"
# Step2. According to port type from Step1 and used OS set Port parameter
# -----------------------------------------------------------------------------
# Port type | "Port" parameter in Windows/DOS | "Port" parameter in Linux/Unix
# ----------|---------------------------------|--------------------------------
# serial | "com*:" | "/dev/ttyS*"
# | (example "com1:") | (example "/dev/ttyS1")
# | | or "/dev/tts/**" (with DevFS)
# ----------|---------------------------------|--------------------------------
# irda | ignored (can be empty) | "/dev/ircomm*"
# ----------|---------------------------------|--------------------------------
# BT | Bluetooth device address
# | (example "")
# ----------|---------------------------------|--------------------------------
# dku2 | ignored (can be empty) | /dev/ttyUSB* or /dev/ttyACM*
# ----------|---------------------------------|--------------------------------
# dku5 | ignored (can be empty) | connection with it not possible
# ----------|---------------------------------|--------------------------------
# usb | connection with it not possible | "/dev/ttyUSB*"
# Step3. Set other config parameters
# -----------------------------------------------------------------------------
# Parameter name | Description
# ----------------|------------------------------------------------------------
# Model | use only, when Gammu doesn't recognize your phone model.
# | Put it here. Example values: "6110", "6150", "6210", "8210"
# SynchronizeTime | if you want to set time from computer to phone during
# | starting connection. Do not rather use this option when
# | when to reset phone during connection (in some phones need
# | to set time again after restart)
# GammuLoc | name of localisation file
# StartInfo | this option allow to set, that you want (setting "yes")
# | to see message on the phone screen or phone should enable
# | light for a moment during starting connection. Phone
# | WON'T beep during starting connection with this option.
# GammuCoding | forces using specified codepage (in win32 - for example
# | "1250" will force CP1250) or UTF8 (in Linux - "utf8")
# ----------------|------------------------------------------------------------
# Logfile | Use, when want to have logfile from communication.
# Logformat | What debug info and format should be used:
# | "nothing" - no debug level (default)
# | "text" - transmission dump in text format
# | "textall" - all possible info in text format
# | "errors" - errors in text format
# | "binary" - transmission dump in binary format
# ----------------|------------------------------------------------------------
# Use_Locking | under Unix/Linux use "yes", if want to lock used device
# | to prevent using it by other applications. In win32 ignored
# ----------------|------------------------------------------------------------
# RSSLevel | Should Gammu connect to www.mwiacek.com and check for new
# | versions ?
# | if yes, there will be taken
# | www.mwiacek.com/gsm/soft/gammu.rss file, read latest version
# | numbers and (if any exist) displayed info to user on each
# | application startup
# | "teststable" - check for latest stable and test versions
# | "stable" - check for latest stable versions
# | No private data are sent to server, Internet connection
# | to www.mwiacek.com on port 80 required
# | By default option not active
# ----------------|------------------------------------------------------------
# UsePhoneDB | Should Gammu connect to www.gammu.org and check for latest
# | firmware versions for device ?
# | if yes (value "yes"), there will be taken
# |www.gammu.org/gammunet/support/phones/phonedbxml.php?model=x
# | file, read all phone details from it and (if any
# | higher firmware exist) displayed info to user on each
# | application startup
# | No private data are sent to server, Internet connection
# | to www.gammu.org on port 80 required
# | By default option not active