rendered paste body[ 0.230573] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.230585] NetLabel: unlabeled traffic allowed by default
[ 0.230619] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.230625] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.230631] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.236121] Switching to clocksource tsc
[ 0.238022] AppArmor: AppArmor Filesystem Enabled
[ 0.238037] pnp: PnP ACPI init
[ 0.238053] ACPI: bus type pnp registered
[ 0.241559] pnp: PnP ACPI: found 14 devices
[ 0.241561] ACPI: ACPI bus type pnp unregistered
[ 0.241565] PnPBIOS: Disabled by ACPI PNP
[ 0.241578] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.241585] system 00:05: ioport range 0x500-0x501 has been reserved
[ 0.241588] system 00:05: ioport range 0x680-0x69f has been reserved
[ 0.241590] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.241593] system 00:05: ioport range 0x480-0x48f has been reserved
[ 0.241596] system 00:05: ioport range 0xffff-0xffff has been reserved
[ 0.241599] system 00:05: ioport range 0x400-0x47f has been reserved
[ 0.241601] system 00:05: ioport range 0x1180-0x11ff has been reserved
[ 0.241604] system 00:05: ioport range 0x164e-0x164f has been reserved
[ 0.241607] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[ 0.241615] system 00:0c: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.241618] system 00:0c: iomem range 0xfed10000-0xfed13fff has been reserved
[ 0.241621] system 00:0c: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.241624] system 00:0c: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.241626] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.241629] system 00:0c: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.241632] system 00:0c: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.241635] system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.276392] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.276396] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.276402] pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff
[ 0.276407] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[ 0.276414] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 0.276417] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.276422] pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff
[ 0.276427] pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff
[ 0.276434] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
[ 0.276437] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.276442] pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff
[ 0.276447] pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff
[ 0.276453] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:08
[ 0.276457] pci 0000:00:1c.3: IO window: 0x5000-0x5fff
[ 0.276462] pci 0000:00:1c.3: MEM window: 0x84000000-0x841fffff
[ 0.276466] pci 0000:00:1c.3: PREFETCH window: 0x00000084200000-0x000000843fffff
[ 0.276475] pci 0000:0a:07.0: CardBus bridge, secondary bus 0000:0b
[ 0.276477] pci 0000:0a:07.0: IO window: 0x006000-0x0060ff
[ 0.276482] pci 0000:0a:07.0: IO window: 0x006400-0x0064ff
[ 0.276487] pci 0000:0a:07.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.276492] pci 0000:0a:07.0: MEM window: 0x88000000-0x8bffffff
[ 0.276497] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 0.276500] pci 0000:00:1e.0: IO window: 0x6000-0x6fff
[ 0.276505] pci 0000:00:1e.0: MEM window: 0xfc500000-0xfc5fffff
[ 0.276510] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.276530] alloc irq_desc for 17 on node -1
[ 0.276532] alloc kstat_irqs on node -1
[ 0.276539] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.276545] pci 0000:00:1c.0: setting latency timer to 64
[ 0.276553] alloc irq_desc for 16 on node -1
[ 0.276555] alloc kstat_irqs on node -1
[ 0.276559] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.276563] pci 0000:00:1c.1: setting latency timer to 64
[ 0.276572] alloc irq_desc for 18 on node -1
[ 0.276573] alloc kstat_irqs on node -1
[ 0.276577] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.276581] pci 0000:00:1c.2: setting latency timer to 64
[ 0.276590] alloc irq_desc for 19 on node -1
[ 0.276592] alloc kstat_irqs on node -1
[ 0.276596] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.276600] pci 0000:00:1c.3: setting latency timer to 64
[ 0.276607] pci 0000:00:1e.0: setting latency timer to 64
[ 0.276619] alloc irq_desc for 21 on node -1
[ 0.276621] alloc kstat_irqs on node -1
[ 0.276624] pci 0000:0a:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.276631] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.276633] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.276636] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.276638] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff]
[ 0.276641] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
[ 0.276644] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff]
[ 0.276646] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff]
[ 0.276649] pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff]
[ 0.276651] pci_bus 0000:06: resource 0 io: [0x4000-0x4fff]
[ 0.276654] pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfbffffff]
[ 0.276656] pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff]
[ 0.276659] pci_bus 0000:08: resource 0 io: [0x5000-0x5fff]
[ 0.276661] pci_bus 0000:08: resource 1 mem: [0x84000000-0x841fffff]
[ 0.276664] pci_bus 0000:08: resource 2 pref mem [0x84200000-0x843fffff]
[ 0.276666] pci_bus 0000:0a: resource 0 io: [0x6000-0x6fff]
[ 0.276669] pci_bus 0000:0a: resource 1 mem: [0xfc500000-0xfc5fffff]
[ 0.276671] pci_bus 0000:0a: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.276674] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 0.276676] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffff]
[ 0.276679] pci_bus 0000:0b: resource 0 io: [0x6000-0x60ff]
[ 0.276681] pci_bus 0000:0b: resource 1 io: [0x6400-0x64ff]
[ 0.276684] pci_bus 0000:0b: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.276686] pci_bus 0000:0b: resource 3 mem: [0x88000000-0x8bffffff]
[ 0.276726] NET: Registered protocol family 2
[ 0.276826] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.277149] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.277677] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.277958] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.277960] TCP reno registered
[ 0.278048] NET: Registered protocol family 1
[ 0.278068] pci 0000:00:02.0: Boot video device
[ 0.278217] Simple Boot Flag at 0x36 set to 0x1
[ 0.278380] cpufreq-nforce2: No nForce2 chipset.
[ 0.278405] Scanning for low memory corruption every 60 seconds
[ 0.278516] audit: initializing netlink socket (disabled)
[ 0.278527] type=2000 audit(1307565821.275:1): initialized
[ 0.288182] highmem bounce pool size: 64 pages
[ 0.288188] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.289662] VFS: Disk quotas dquot_6.5.2
[ 0.289724] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.290280] fuse init (API version 7.13)
[ 0.290362] msgmni has been set to 1691
[ 0.290564] alg: No test for stdrng (krng)
[ 0.290617] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.290620] io scheduler noop registered
[ 0.290622] io scheduler anticipatory registered
[ 0.290624] io scheduler deadline registered
[ 0.290661] io scheduler cfq registered (default)
[ 0.290811] alloc irq_desc for 24 on node -1
[ 0.290814] alloc kstat_irqs on node -1
[ 0.290824] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.290833] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.290954] alloc irq_desc for 25 on node -1
[ 0.290956] alloc kstat_irqs on node -1
[ 0.290963] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.290971] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.291092] alloc irq_desc for 26 on node -1
[ 0.291094] alloc kstat_irqs on node -1
[ 0.291101] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.291109] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.291228] alloc irq_desc for 27 on node -1
[ 0.291230] alloc kstat_irqs on node -1
[ 0.291237] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.291245] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.291329] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.291504] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.291673] ACPI: AC Adapter [ADP0] (on-line)
[ 0.291745] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.291749] ACPI: Sleep Button [SLPB]
[ 0.291790] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.291833] ACPI: Lid Switch [LID]
[ 0.291875] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.291878] ACPI: Power Button [PWRB]
[ 0.291919] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.291921] ACPI: Power Button [PWRF]
[ 0.292056] fan PNP0C0B:00: registered as cooling_device0
[ 0.292061] ACPI: Fan [FAN0] (on)
[ 0.292850] ACPI: SSDT 7db1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.293409] ACPI: SSDT 7db18620 0054F (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.295620] Monitor-Mwait will be used to enter C-1 state
[ 0.295650] Monitor-Mwait will be used to enter C-2 state
[ 0.295675] Monitor-Mwait will be used to enter C-3 state
[ 0.295681] Marking TSC unstable due to TSC halts in idle
[ 0.295730] processor LNXCPU:00: registered as cooling_device1
[ 0.296183] ACPI: SSDT 7db19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.296624] ACPI: SSDT 7db19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.297469] Switching to clocksource hpet
[ 0.305076] processor LNXCPU:01: registered as cooling_device2
[ 0.308048] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.308058] ACPI: Thermal Zone [TZ00] (67 C)
[ 0.308222] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.308230] ACPI: Thermal Zone [TZVR] (0 C)
[ 0.308391] thermal LNXTHERM:03: registered as thermal_zone2
[ 0.308399] ACPI: Thermal Zone [TZVL] (0 C)
[ 0.308563] thermal LNXTHERM:04: registered as thermal_zone3
[ 0.308570] ACPI: Thermal Zone [TZ01] (53 C)
[ 0.310061] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.310164] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.310527] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.311628] brd: module loaded
[ 0.312247] loop: module loaded
[ 0.312334] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.312741] Fixed MDIO Bus: probed
[ 0.312772] PPP generic driver version 2.4.2
[ 0.312803] tun: Universal TUN/TAP device driver, 1.6
[ 0.312805] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.312880] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.312901] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.312915] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.312919] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.312948] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.312983] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.316877] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.316892] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc804800
[ 0.320837] isapnp: Scanning for PnP cards...
[ 0.365852] ACPI: Battery Slot [BAT0] (battery present)
[ 0.366006] Freeing initrd memory: 7805k freed
[ 0.369799] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.370103] usb usb1: configuration #1 chosen from 1 choice
[ 0.370144] hub 1-0:1.0: USB hub found
[ 0.370169] hub 1-0:1.0: 4 ports detected
[ 0.370291] alloc irq_desc for 23 on node -1
[ 0.370294] alloc kstat_irqs on node -1
[ 0.370308] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.370359] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.370363] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.370433] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.370488] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.374370] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.374387] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc804c00
[ 0.392013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.392098] usb usb2: configuration #1 chosen from 1 choice
[ 0.392123] hub 2-0:1.0: USB hub found
[ 0.392130] hub 2-0:1.0: 6 ports detected
[ 0.392190] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.392208] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.392253] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.392259] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.392262] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.392292] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.392322] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 0.392406] usb usb3: configuration #1 chosen from 1 choice
[ 0.392430] hub 3-0:1.0: USB hub found
[ 0.392437] hub 3-0:1.0: 2 ports detected
[ 0.392477] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.392483] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.392486] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.392514] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.392542] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 0.392626] usb usb4: configuration #1 chosen from 1 choice
[ 0.392650] hub 4-0:1.0: USB hub found
[ 0.392657] hub 4-0:1.0: 2 ports detected
[ 0.392698] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.392704] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.392707] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.392741] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.392763] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 0.392846] usb usb5: configuration #1 chosen from 1 choice
[ 0.392869] hub 5-0:1.0: USB hub found
[ 0.392878] hub 5-0:1.0: 2 ports detected
[ 0.392917] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.392922] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.392925] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.392956] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.392978] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 0.393072] usb usb6: configuration #1 chosen from 1 choice
[ 0.393095] hub 6-0:1.0: USB hub found
[ 0.393102] hub 6-0:1.0: 2 ports detected
[ 0.393144] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.393149] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.393152] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.393180] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.393209] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 0.393292] usb usb7: configuration #1 chosen from 1 choice
[ 0.393315] hub 7-0:1.0: USB hub found
[ 0.393322] hub 7-0:1.0: 2 ports detected
[ 0.393421] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.398275] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.400922] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.400930] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.400933] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.400936] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.400938] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.401061] mice: PS/2 mouse device common for all mice
[ 0.401197] rtc_cmos 00:06: RTC can wake from S4
[ 0.401233] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.401257] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.401353] device-mapper: uevent: version 1.0.3
[ 0.401464] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.401523] device-mapper: multipath: version 1.1.0 loaded
[ 0.401526] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.401628] EISA: Probing bus 0 at eisa.0
[ 0.401634] Cannot allocate resource for EISA slot 1
[ 0.401636] Cannot allocate resource for EISA slot 2
[ 0.401638] Cannot allocate resource for EISA slot 3
[ 0.401640] Cannot allocate resource for EISA slot 4
[ 0.401642] Cannot allocate resource for EISA slot 5
[ 0.401644] Cannot allocate resource for EISA slot 6
[ 0.401651] EISA: Detected 0 cards.
[ 0.401780] cpuidle: using governor ladder
[ 0.401888] cpuidle: using governor menu
[ 0.402291] TCP cubic registered
[ 0.402438] NET: Registered protocol family 10
[ 0.403211] NET: Registered protocol family 17
[ 0.403836] Using IPI No-Shortcut mode
[ 0.403904] PM: Resume from disk failed.
[ 0.403916] registered taskstats version 1
[ 0.404388] Magic number: 15:406:750
[ 0.404405] tty ttyS1: hash matches
[ 0.404463] rtc_cmos 00:06: setting system clock to 2011-06-08 20:43:42 UTC (1307565822)
[ 0.404466] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.404467] EDD information not available.
[ 0.442475] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.682525] isapnp: No Plug & Play device found
[ 0.682560] Freeing unused kernel memory: 668k freed
[ 0.682958] Write protecting the kernel text: 4676k
[ 0.683009] Write protecting the kernel read-only data: 1848k
[ 0.698419] udev: starting version 151
[ 0.760054] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 0.809801] tg3.c:v3.102 (September 1, 2009)
[ 0.809830] tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.809843] tg3 0000:04:00.0: setting latency timer to 64
[ 0.810047] ahci 0000:00:1f.2: version 3.0
[ 0.810057] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.810087] alloc irq_desc for 28 on node -1
[ 0.810090] alloc kstat_irqs on node -1
[ 0.810099] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 0.810137] ahci: SSS flag set, parallel bus scan disabled
[ 0.810161] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.810164] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 0.810169] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.816340] scsi0 : ahci
[ 0.816499] scsi1 : ahci
[ 0.816594] scsi2 : ahci
[ 0.816691] scsi3 : ahci
[ 0.816738] ata1: SATA max UDMA/133 abar m2048@0xfc804000 port 0xfc804100 irq 28
[ 0.816742] ata2: SATA max UDMA/133 abar m2048@0xfc804000 port 0xfc804180 irq 28
[ 0.816744] ata3: DUMMY
[ 0.816745] ata4: DUMMY
[ 0.836371] eth0: Tigon3 [partno(BCM95764m) rev 5784100] (PCI Express) MAC address 00:a0:d1:ae:bd:d5
[ 0.836374] eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 0.836377] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 0.836379] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 0.893445] usb 2-2: configuration #1 chosen from 1 choice
[ 0.900242] Initializing USB Mass Storage driver...
[ 0.900363] scsi4 : SCSI emulation for USB Mass Storage devices
[ 0.900445] usbcore: registered new interface driver usb-storage
[ 0.900448] USB Mass Storage support registered.
[ 0.900453] usb-storage: device found at 3
[ 0.900454] usb-storage: waiting for device to settle before scanning
[ 1.004068] usb 2-6: new high speed USB device using ehci_hcd and address 4
[ 1.136049] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.136778] ata1.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
[ 1.136783] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.137051] usb 2-6: configuration #1 chosen from 1 choice
[ 1.137645] ata1.00: configured for UDMA/133
[ 1.152243] scsi 0:0:0:0: Direct-Access ATA ST9250827AS 3.AA PQ: 0 ANSI: 5
[ 1.152397] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.152486] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.152529] sd 0:0:0:0: [sda] Write Protect is off
[ 1.152531] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.152553] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.152677] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.205250] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.376065] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 1.551918] usb 5-1: configuration #1 chosen from 1 choice
[ 1.664158] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.836582] usb 1-1: configuration #1 chosen from 1 choice
[ 1.877047] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.890019] ata2.00: ATAPI: Optiarc DVD RW AD-7560S, SX07, max UDMA/100
[ 1.903759] ata2.00: configured for UDMA/100
[ 1.921206] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7560S SX07 PQ: 0 ANSI: 5
[ 1.926994] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.926999] Uniform CD-ROM driver Revision: 3.20
[ 1.927160] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.927214] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.929964] alloc irq_desc for 20 on node -1
[ 1.929967] alloc kstat_irqs on node -1
[ 1.929974] ohci1394 0000:0a:07.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.934013] usbcore: registered new interface driver hiddev
[ 1.947083] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input6
[ 1.947175] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1/input0
[ 1.947203] usbcore: registered new interface driver usbhid
[ 1.947206] usbhid: v2.6:USB HID core driver
[ 1.988065] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[fc502000-fc5027ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.491200] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 3.260311] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00a0d1a0d1aebdd5]
[ 5.896288] usb-storage: device scan complete
[ 5.897104] scsi 4:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
[ 5.897573] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 5.898094] sd 4:0:0:0: [sdb] 3907024896 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 5.898961] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 5.898964] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5.900587] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 5.900592] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5.900600] sdb: sdb1
[ 6.304086] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 6.304089] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.304091] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 15.797725] Adding 2000084k swap on /dev/sda3. Priority:-1 extents:1 across:2000084k
[ 15.808162] udev: starting version 151
[ 16.039239] type=1505 audit(1307558638.131:2): operation="profile_load" pid=527 name="/sbin/dhclient3"
[ 16.039920] type=1505 audit(1307558638.131:3): operation="profile_load" pid=527 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 16.040297] type=1505 audit(1307558638.135:4): operation="profile_load" pid=527 name="/usr/lib/connman/scripts/dhclient-script"
[ 16.041812] type=1505 audit(1307558638.135:5): operation="profile_replace" pid=534 name="/sbin/dhclient3"
[ 16.042502] type=1505 audit(1307558638.135:6): operation="profile_replace" pid=534 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 16.042882] type=1505 audit(1307558638.135:7): operation="profile_replace" pid=534 name="/usr/lib/connman/scripts/dhclient-script"
[ 16.346629] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 16.346864] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 16.346918] acer-wmi: Brightness must be controlled by generic video driver
[ 16.429366] Linux video capture interface: v2.00
[ 16.439288] parport_pc 00:09: activated
[ 16.439292] parport_pc 00:09: reported by Plug and Play ACPI
[ 16.439365] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 16.445207] lp: driver loaded but no devices found
[ 16.528264] ppdev: user-space parallel port driver
[ 16.537257] lp0: using parport0 (interrupt-driven).
[ 16.537612] tpm_tis 00:0d: 1.2 TPM (device-id 0xB, rev-id 16)
[ 16.559395] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:a103)
[ 16.575824] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input7
[ 16.575876] usbcore: registered new interface driver uvcvideo
[ 16.575879] USB Video Class driver (v0.1.0)
[ 16.640592] sdhci: Secure Digital Host Controller Interface driver
[ 16.640595] sdhci: Copyright(c) Pierre Ossman
[ 16.660209] sdhci-pci 0000:0a:07.3: SDHCI controller found [104c:803c] (rev 0)
[ 16.660225] sdhci-pci 0000:0a:07.3: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 16.660285] Registered led device: mmc0::
[ 16.660421] mmc0: SDHCI controller on PCI [0000:0a:07.3] using DMA
[ 16.860032] tpm_tis 00:0d: Operation Timed out
[ 16.961051] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 17.061094] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa04000/0x0
[ 17.098126] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 17.134192] usb 3-2: configuration #1 chosen from 1 choice
[ 17.183378] cfg80211: Calling CRDA to update world regulatory domain
[ 17.183721] yenta_cardbus 0000:0a:07.0: CardBus bridge found [1025:0139]
[ 17.183739] yenta_cardbus 0000:0a:07.0: Enabling burst memory read transactions
[ 17.183745] yenta_cardbus 0000:0a:07.0: Using CSCINT to route CSC interrupts to PCI
[ 17.183747] yenta_cardbus 0000:0a:07.0: Routing CardBus interrupts to PCI
[ 17.183752] yenta_cardbus 0000:0a:07.0: TI: mfunc 0x01a61b22, devctl 0x66
[ 17.190609] Linux agpgart interface v0.103
[ 17.200396] Bluetooth: Core ver 2.15
[ 17.200566] NET: Registered protocol family 31
[ 17.200568] Bluetooth: HCI device and connection manager initialized
[ 17.200571] Bluetooth: HCI socket layer initialized
[ 17.241421] cfg80211: World regulatory domain updated:
[ 17.241424] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.241427] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.241430] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.241433] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.241435] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.241438] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.260756] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 17.261473] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 17.288735] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 17.315758] alloc irq_desc for 29 on node -1
[ 17.315761] alloc kstat_irqs on node -1
[ 17.315776] tg3 0000:04:00.0: irq 29 for MSI/MSI-X
[ 17.326305] type=1505 audit(1307558639.419:8): operation="profile_replace" pid=799 name="/sbin/dhclient3"
[ 17.326997] type=1505 audit(1307558639.419:9): operation="profile_replace" pid=799 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 17.327379] type=1505 audit(1307558639.419:10): operation="profile_replace" pid=799 name="/usr/lib/connman/scripts/dhclient-script"
[ 17.330002] type=1505 audit(1307558639.423:11): operation="profile_load" pid=798 name="/usr/share/gdm/guest-session/Xsession"
[ 17.413880] yenta_cardbus 0000:0a:07.0: ISA IRQ mask 0x0c70, PCI irq 21
[ 17.413894] yenta_cardbus 0000:0a:07.0: Socket status: 30000006
[ 17.413898] pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
[ 17.413926] yenta_cardbus 0000:0a:07.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
[ 17.413929] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x6000-0x6fff: clean.
[ 17.414145] yenta_cardbus 0000:0a:07.0: pcmcia: parent PCI bridge Memory window: 0xfc500000 - 0xfc5fffff
[ 17.414148] yenta_cardbus 0000:0a:07.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
[ 17.414810] alloc irq_desc for 22 on node -1
[ 17.414813] alloc kstat_irqs on node -1
[ 17.414839] tifm_7xx1 0000:0a:07.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 18.094205] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.172570] [drm] Initialized drm 1.1.0 20060810
[ 18.240128] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 18.240257] usbcore: registered new interface driver btusb
[ 18.309993] Bluetooth: L2CAP ver 2.14
[ 18.309995] Bluetooth: L2CAP socket layer initialized
[ 18.479955] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.479960] i915 0000:00:02.0: setting latency timer to 64
[ 18.486740] alloc irq_desc for 30 on node -1
[ 18.486744] alloc kstat_irqs on node -1
[ 18.486754] i915 0000:00:02.0: irq 30 for MSI/MSI-X
[ 18.486761] [drm] set up 31M of stolen space
[ 18.917615] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.917618] Bluetooth: BNEP filters: protocol multicast
[ 18.993052] Bridge firewalling registered
[ 19.053343] fb0: inteldrmfb frame buffer device
[ 19.053345] registered panic notifier
[ 19.053378] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 19.080172] acpi device:02: registered as cooling_device3
[ 19.081638] acpi device:04: registered as cooling_device4
[ 19.083170] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 19.083300] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 19.083391] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 19.111292] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x200-0x20f 0x300-0x31f
[ 19.112590] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 19.112870] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 19.113323] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 19.113908] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 19.139492] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[ 19.139496] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 19.139589] iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 19.139619] iwlagn 0000:02:00.0: setting latency timer to 64
[ 19.139674] iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
[ 19.172793] Bluetooth: SCO (Voice Link) ver 0.6
[ 19.172796] Bluetooth: SCO socket layer initialized
[ 19.177145] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 19.177199] alloc irq_desc for 31 on node -1
[ 19.177201] alloc kstat_irqs on node -1
[ 19.177218] iwlagn 0000:02:00.0: irq 31 for MSI/MSI-X
[ 19.216186] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 19.230085] iwlagn 0000:02:00.0: firmware: requesting iwlwifi-5000-5.ucode
[ 19.254536] vga16fb: initializing
[ 19.254539] vga16fb: mapped to 0xc00a0000
[ 19.254543] vga16fb: not registering due to another framebuffer present
[ 19.426653] iwlagn 0000:02:00.0: Driver unable to support your firmware API. Driver supports v5, firmware is v0.
[ 19.426708] iwlagn 0000:02:00.0: Could not read microcode: -22
[ 19.428166] iwlagn 0000:02:00.0: firmware: requesting iwlwifi-5000-5.ucode
[ 19.431011] iwlagn 0000:02:00.0: Driver unable to support your firmware API. Driver supports v5, firmware is v0.
[ 19.431073] iwlagn 0000:02:00.0: Could not read microcode: -22
[ 19.553962] Console: switching to colour frame buffer device 160x50
[ 19.559530] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 19.559568] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 19.632892] Bluetooth: RFCOMM TTY layer initialized
[ 19.632896] Bluetooth: RFCOMM socket layer initialized
[ 19.632898] Bluetooth: RFCOMM ver 1.11
[ 19.690803] hda_codec: ALC268: BIOS auto-probing.
[ 19.691274] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 19.752755] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 19.752758] tg3: eth0: Flow control is on for TX and on for RX.
[ 19.752872] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 29.953027] eth0: no IPv6 routers present
[ 113.676587] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 143.426280] iwlagn 0000:02:00.0: firmware: requesting iwlwifi-5000-5.ucode
[ 143.430457] iwlagn 0000:02:00.0: Driver unable to support your firmware API. Driver supports v5, firmware is v0.
[ 143.430475] iwlagn 0000:02:00.0: Could not read microcode: -22