rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-8-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.38-8-generic root=/dev/mapper/butler-root ro splash acpi=off quiet splash vt.handoff=7
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b9e90000 (usable)
[ 0.000000] BIOS-e820: 00000000b9e90000 - 00000000b9ebf000 (reserved)
[ 0.000000] BIOS-e820: 00000000b9ebf000 - 00000000b9f6d000 (usable)
[ 0.000000] BIOS-e820: 00000000b9f6d000 - 00000000b9fbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b9fbf000 - 00000000b9fdc000 (usable)
[ 0.000000] BIOS-e820: 00000000b9fdc000 - 00000000b9ff7000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b9ff7000 - 00000000ba000000 (usable)
[ 0.000000] BIOS-e820: 00000000ba000000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP TouchSmart tm2 Notebook PC/3662, BIOS F.0B 11/22/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BA000000 mask FFE000000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask FC0000000 write-back
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xba000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000ba000000
[ 0.000000] 0000000000 - 00ba000000 page 2M
[ 0.000000] kernel direct mapping tables up to ba000000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000
[ 0.000000] 0100000000 - 0240000000 page 2M
[ 0.000000] kernel direct mapping tables up to 240000000 @ b9fd2000-b9fdc000
[ 0.000000] RAMDISK: 359b6000 - 36cd3000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000240000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000
[ 0.000000] NODE_DATA [000000023fffb000 - 000000023fffffff]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237e00000-ffff88023edfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00240000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000b9e90
[ 0.000000] 0: 0x000b9ebf -> 0x000b9f6d
[ 0.000000] 0: 0x000b9fbf -> 0x000b9fdc
[ 0.000000] 0: 0x000b9ff7 -> 0x000ba000
[ 0.000000] 0: 0x00100000 -> 0x00240000
[ 0.000000] On node 0 totalpages: 2072306
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 743324 pages, LIFO batch:31
[ 0.000000] Normal zone: 17920 pages used for memmap
[ 0.000000] Normal zone: 1292800 pages, LIFO batch:31
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b9e90000 - 00000000b9ebf000
[ 0.000000] PM: Registered nosave memory: 00000000b9f6d000 - 00000000b9fbf000
[ 0.000000] PM: Registered nosave memory: 00000000b9fdc000 - 00000000b9ff7000
[ 0.000000] PM: Registered nosave memory: 00000000ba000000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800b9c00000 s84416 r8192 d22080 u2097152
[ 0.000000] pcpu-alloc: s84416 r8192 d22080 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2040044
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-8-generic root=/dev/mapper/butler-root ro splash acpi=off quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8075260k/9437184k available (5940k kernel code, 1147960k absent, 213964k reserved, 5017k data, 956k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:256 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 83886080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1297.032 MHz processor.
[ 0.020005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.06 BogoMIPS (lpj=12970320)
[ 0.020012] pid_max: default: 32768 minimum: 301
[ 0.020054] Security Framework initialized
[ 0.020082] AppArmor: AppArmor initialized
[ 0.020085] Yama: becoming mindful.
[ 0.021412] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.031645] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.034127] Mount-cache hash table entries: 256
[ 0.034339] Initializing cgroup subsys ns
[ 0.034347] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.034351] Initializing cgroup subsys cpuacct
[ 0.034358] Initializing cgroup subsys memory
[ 0.034372] Initializing cgroup subsys devices
[ 0.034375] Initializing cgroup subsys freezer
[ 0.034378] Initializing cgroup subsys net_cls
[ 0.034381] Initializing cgroup subsys blkio
[ 0.034438] CPU: Unsupported number of siblings 2
[ 0.034442] mce: CPU supports 6 MCE banks
[ 0.034453] CPU0: Thermal monitoring handled by SMI
[ 0.034459] using mwait in idle threads.
[ 0.034509] SMP alternatives: switching to UP code
[ 0.049470] Freeing SMP alternatives: 20k freed
[ 0.049490] ftrace: allocating 24314 entries in 96 pages
[ 0.060069] weird, boot CPU (#0) not listed by the BIOS.
[ 0.060072] SMP motherboard not detected.
[ 0.060079] Setting APIC routing to flat
[ 0.180016] SMP disabled
[ 0.180019] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.180030] ... version: 2
[ 0.180032] ... bit width: 40
[ 0.180035] ... generic registers: 2
[ 0.180037] ... value mask: 000000ffffffffff
[ 0.180040] ... max period: 000000007fffffff
[ 0.180042] ... fixed-purpose events: 3
[ 0.180045] ... event mask: 0000000700000003
[ 0.180730] Brought up 1 CPUs
[ 0.180733] Total of 1 processors activated (2594.06 BogoMIPS).
[ 0.180837] devtmpfs: initialized
[ 0.182415] print_constraints: dummy:
[ 0.182448] Time: 21:37:30 Date: 06/07/11
[ 0.182496] NET: Registered protocol family 16
[ 0.182724] PCI: Using configuration type 1 for base access
[ 0.183911] bio: create slab <bio-0> at 0
[ 0.184015] ACPI: Interpreter disabled.
[ 0.184099] vgaarb: loaded
[ 0.184340] SCSI subsystem initialized
[ 0.184392] libata version 3.00 loaded.
[ 0.184458] usbcore: registered new interface driver usbfs
[ 0.184473] usbcore: registered new interface driver hub
[ 0.184505] usbcore: registered new device driver usb
[ 0.184623] PCI: Probing PCI hardware
[ 0.184626] PCI: Probing PCI hardware (bus 00)
[ 0.184677] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.184708] DMAR: Forcing write-buffer flush capability
[ 0.184710] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.184746] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.184766] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
[ 0.184778] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.184787] pci 0000:00:02.0: reg 20: [io 0x30f0-0x30f7]
[ 0.184832] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.184849] pci 0000:00:02.1: reg 10: [mem 0xd2400000-0xd24fffff 64bit]
[ 0.184955] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.185042] pci 0000:00:1a.0: reg 20: [io 0x30c0-0x30df]
[ 0.185129] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.185208] pci 0000:00:1a.1: reg 20: [io 0x30a0-0x30bf]
[ 0.185294] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.189808] pci 0000:00:1a.7: reg 10: [mem 0xd4504c00-0xd4504fff]
[ 0.216771] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.216778] pci 0000:00:1a.7: PME# disabled
[ 0.216820] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.216844] pci 0000:00:1b.0: reg 10: [mem 0xd4500000-0xd4503fff 64bit]
[ 0.216934] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.216940] pci 0000:00:1b.0: PME# disabled
[ 0.216971] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.217061] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.217067] pci 0000:00:1c.0: PME# disabled
[ 0.217098] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 0.217189] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.217195] pci 0000:00:1c.1: PME# disabled
[ 0.217241] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.217328] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f]
[ 0.217417] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.217504] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f]
[ 0.217587] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.217676] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f]
[ 0.217770] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.222246] pci 0000:00:1d.7: reg 10: [mem 0xd4504800-0xd4504bff]
[ 0.249017] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.249024] pci 0000:00:1d.7: PME# disabled
[ 0.249054] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.249144] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
[ 0.249295] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.249327] pci 0000:00:1f.2: reg 10: [io 0x30e8-0x30ef]
[ 0.249340] pci 0000:00:1f.2: reg 14: [io 0x30fc-0x30ff]
[ 0.249354] pci 0000:00:1f.2: reg 18: [io 0x30e0-0x30e7]
[ 0.249367] pci 0000:00:1f.2: reg 1c: [io 0x30f8-0x30fb]
[ 0.249381] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f]
[ 0.249394] pci 0000:00:1f.2: reg 24: [mem 0xd4504000-0xd45047ff]
[ 0.249450] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.249456] pci 0000:00:1f.2: PME# disabled
[ 0.249483] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.249508] pci 0000:00:1f.3: reg 10: [mem 0xd4505000-0xd45050ff 64bit]
[ 0.249543] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
[ 0.250024] pci 0000:01:00.0: [10ec:8136] type 0 class 0x000200
[ 0.250084] pci 0000:01:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.250197] pci 0000:01:00.0: reg 18: [mem 0xd0410000-0xd0410fff 64bit pref]
[ 0.250271] pci 0000:01:00.0: reg 20: [mem 0xd0400000-0xd040ffff 64bit pref]
[ 0.250318] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.250473] pci 0000:01:00.0: supports D1 D2
[ 0.250476] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.250504] pci 0000:01:00.0: PME# disabled
[ 0.250643] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.250649] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.250655] pci 0000:00:1c.0: bridge window [mem 0xd3500000-0xd44fffff]
[ 0.250664] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.250919] pci 0000:02:00.0: [14e4:432b] type 0 class 0x000280
[ 0.250957] pci 0000:02:00.0: reg 10: [mem 0xd2500000-0xd2503fff 64bit]
[ 0.251109] pci 0000:02:00.0: supports D1 D2
[ 0.251112] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.251121] pci 0000:02:00.0: PME# disabled
[ 0.251188] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.251195] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.251201] pci 0000:00:1c.1: bridge window [mem 0xd2500000-0xd34fffff]
[ 0.251211] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.251305] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.251313] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.251319] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.251329] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.251333] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.251337] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.251427] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.252444] PCI: Discovered primary peer bus 08 [IRQ]
[ 0.252533] PCI: Discovered primary peer bus ff [IRQ]
[ 0.252550] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2917]
[ 0.252584] PCI: setting IRQ 11 as level-triggered
[ 0.252589] pci 0000:00:1c.0: found PCI INT A -> IRQ 11
[ 0.252658] pci 0000:00:1c.0: sharing IRQ 11 with 0000:02:00.0
[ 0.252670] pci 0000:00:1c.1: found PCI INT B -> IRQ 11
[ 0.252676] pci 0000:00:1c.1: sharing IRQ 11 with 0000:00:02.0
[ 0.252685] pci 0000:00:1c.1: sharing IRQ 11 with 0000:00:1a.0
[ 0.252716] pci 0000:00:1c.1: sharing IRQ 11 with 0000:00:1d.2
[ 0.252743] pci 0000:00:1c.1: sharing IRQ 11 with 0000:01:00.0
[ 0.252792] PCI: pci_cache_line_size set to 64 bytes
[ 0.252904] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[ 0.252908] reserve RAM buffer: 00000000b9e90000 - 00000000bbffffff
[ 0.252912] reserve RAM buffer: 00000000b9f6d000 - 00000000bbffffff
[ 0.252916] reserve RAM buffer: 00000000b9fdc000 - 00000000bbffffff
[ 0.252920] reserve RAM buffer: 00000000ba000000 - 00000000bbffffff
[ 0.253053] NetLabel: Initializing
[ 0.253056] NetLabel: domain hash size = 128
[ 0.253059] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.253074] NetLabel: unlabeled traffic allowed by default
[ 0.263374] AppArmor: AppArmor Filesystem Enabled
[ 0.263406] pnp: PnP ACPI: disabled
[ 0.265983] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.266040] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0420000-0xd043ffff pref]
[ 0.266045] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.266050] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.266058] pci 0000:00:1c.0: bridge window [mem 0xd3500000-0xd44fffff]
[ 0.266065] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.266076] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.266080] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.266088] pci 0000:00:1c.1: bridge window [mem 0xd2500000-0xd34fffff]
[ 0.266094] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.266104] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.266106] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.266113] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.266119] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.266142] pci 0000:00:1c.0: found PCI INT A -> IRQ 11
[ 0.266361] pci 0000:00:1c.0: sharing IRQ 11 with 0000:02:00.0
[ 0.266369] pci 0000:00:1c.0: setting latency timer to 64
[ 0.266384] pci 0000:00:1c.1: found PCI INT B -> IRQ 11
[ 0.266391] pci 0000:00:1c.1: sharing IRQ 11 with 0000:00:02.0
[ 0.266400] pci 0000:00:1c.1: sharing IRQ 11 with 0000:00:1a.0
[ 0.266432] pci 0000:00:1c.1: sharing IRQ 11 with 0000:00:1d.2
[ 0.266459] pci 0000:00:1c.1: sharing IRQ 11 with 0000:01:00.0
[ 0.266470] pci 0000:00:1c.1: setting latency timer to 64
[ 0.266480] pci 0000:00:1e.0: setting latency timer to 64
[ 0.266487] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.266490] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.266494] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.266498] pci_bus 0000:01: resource 1 [mem 0xd3500000-0xd44fffff]
[ 0.266502] pci_bus 0000:01: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.266506] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.266509] pci_bus 0000:02: resource 1 [mem 0xd2500000-0xd34fffff]
[ 0.266513] pci_bus 0000:02: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.266517] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 0.266521] pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.266525] pci_bus 0000:08: resource 0 [io 0x0000-0xffff]
[ 0.266528] pci_bus 0000:08: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.266533] pci_bus 0000:ff: resource 0 [io 0x0000-0xffff]
[ 0.266536] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.266588] NET: Registered protocol family 2
[ 0.266899] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.268910] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.273940] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.274579] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.274583] TCP reno registered
[ 0.274602] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.274701] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.274919] NET: Registered protocol family 1
[ 0.274946] pci 0000:00:02.0: Boot video device
[ 0.310195] PCI: CLS 64 bytes, default 64
[ 0.310205] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.310209] Placing 64MB software IO TLB between ffff8800b5a8e000 - ffff8800b9a8e000
[ 0.310212] software IO TLB at phys 0xb5a8e000 - 0xb9a8e000
[ 0.310381] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.310712] audit: initializing netlink socket (disabled)
[ 0.310728] type=2000 audit(1307482649.310:1): initialized
[ 0.332108] Trying to unpack rootfs image as initramfs...
[ 0.361361] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.370338] VFS: Disk quotas dquot_6.5.2
[ 0.370419] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.371313] fuse init (API version 7.16)
[ 0.371443] msgmni has been set to 15772
[ 0.380591] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.380626] io scheduler noop registered
[ 0.380629] io scheduler deadline registered
[ 0.380692] io scheduler cfq registered (default)
[ 0.380975] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.381007] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.381065] intel_idle: MWAIT substates: 0x3122220
[ 0.381069] intel_idle: does not run on family 6 model 23
[ 0.381157] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.382591] Linux agpgart interface v0.103
[ 0.382678] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.382914] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.383819] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 0.383962] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 0.385590] brd: module loaded
[ 0.386341] loop: module loaded
[ 0.386472] i2c-core: driver [adp5520] using legacy suspend method
[ 0.386476] i2c-core: driver [adp5520] using legacy resume method
[ 0.387049] Fixed MDIO Bus: probed
[ 0.387091] PPP generic driver version 2.4.2
[ 0.387140] tun: Universal TUN/TAP device driver, 1.6
[ 0.387143] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.387260] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.387287] ehci_hcd 0000:00:1a.7: found PCI INT D -> IRQ 11
[ 0.387324] ehci_hcd 0000:00:1a.7: sharing IRQ 11 with 0000:00:1d.1
[ 0.387343] ehci_hcd 0000:00:1a.7: sharing IRQ 11 with 0000:00:1f.2
[ 0.387533] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.387538] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.387595] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.387644] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.391543] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.400469] ehci_hcd 0000:00:1a.7: irq 11, io mem 0xd4504c00
[ 0.420082] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.420297] hub 1-0:1.0: USB hub found
[ 0.420304] hub 1-0:1.0: 4 ports detected
[ 0.420409] ehci_hcd 0000:00:1d.7: found PCI INT A -> IRQ 11
[ 0.420441] ehci_hcd 0000:00:1d.7: sharing IRQ 11 with 0000:00:1d.0
[ 0.420655] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.420661] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.420717] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.420761] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.424656] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.424666] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd4504800
[ 0.440179] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.440370] hub 2-0:1.0: USB hub found
[ 0.440379] hub 2-0:1.0: 6 ports detected
[ 0.440483] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.440503] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.440602] uhci_hcd 0000:00:1a.0: found PCI INT A -> IRQ 11
[ 0.440610] uhci_hcd 0000:00:1a.0: sharing IRQ 11 with 0000:00:02.0
[ 0.440635] uhci_hcd 0000:00:1a.0: sharing IRQ 11 with 0000:00:1c.1
[ 0.440649] uhci_hcd 0000:00:1a.0: sharing IRQ 11 with 0000:00:1d.2
[ 0.440676] uhci_hcd 0000:00:1a.0: sharing IRQ 11 with 0000:01:00.0
[ 0.440844] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.440849] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.440905] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.440942] uhci_hcd 0000:00:1a.0: irq 11, io base 0x000030c0
[ 0.441107] hub 3-0:1.0: USB hub found
[ 0.441114] hub 3-0:1.0: 2 ports detected
[ 0.441199] PCI: setting IRQ 10 as level-triggered
[ 0.441205] uhci_hcd 0000:00:1a.1: found PCI INT B -> IRQ 10
[ 0.441227] uhci_hcd 0000:00:1a.1: sharing IRQ 10 with 0000:00:1b.0
[ 0.441284] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.441289] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.441347] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.441384] uhci_hcd 0000:00:1a.1: irq 10, io base 0x000030a0
[ 0.441547] hub 4-0:1.0: USB hub found
[ 0.441553] hub 4-0:1.0: 2 ports detected
[ 0.441641] uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 11
[ 0.441684] uhci_hcd 0000:00:1d.0: sharing IRQ 11 with 0000:00:1d.7
[ 0.441718] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.441723] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.441780] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.441814] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00003080
[ 0.441977] hub 5-0:1.0: USB hub found
[ 0.441983] hub 5-0:1.0: 2 ports detected
[ 0.442071] uhci_hcd 0000:00:1d.1: found PCI INT B -> IRQ 11
[ 0.442090] uhci_hcd 0000:00:1d.1: sharing IRQ 11 with 0000:00:1a.7
[ 0.442127] uhci_hcd 0000:00:1d.1: sharing IRQ 11 with 0000:00:1f.2
[ 0.442153] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.442158] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.442206] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.442238] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00003060
[ 0.442410] hub 6-0:1.0: USB hub found
[ 0.442416] hub 6-0:1.0: 2 ports detected
[ 0.442515] uhci_hcd 0000:00:1d.2: found PCI INT D -> IRQ 11
[ 0.442522] uhci_hcd 0000:00:1d.2: sharing IRQ 11 with 0000:00:02.0
[ 0.442531] uhci_hcd 0000:00:1d.2: sharing IRQ 11 with 0000:00:1a.0
[ 0.442551] uhci_hcd 0000:00:1d.2: sharing IRQ 11 with 0000:00:1c.1
[ 0.442589] uhci_hcd 0000:00:1d.2: sharing IRQ 11 with 0000:01:00.0
[ 0.442602] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.442607] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.442654] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.442689] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00003040
[ 0.442850] hub 7-0:1.0: USB hub found
[ 0.442856] hub 7-0:1.0: 2 ports detected
[ 0.442975] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.451388] i8042: Detected active multiplexing controller, rev 1.1
[ 0.453950] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.453960] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.460360] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.460402] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.460441] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.460607] mousedev: PS/2 mouse device common for all mice
[ 0.460753] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.460781] rtc0: alarms up to one day, 114 bytes nvram
[ 0.460928] device-mapper: uevent: version 1.0.3
[ 0.461044] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 0.461123] device-mapper: multipath: version 1.2.0 loaded
[ 0.461127] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.470091] cpuidle: using governor ladder
[ 0.470095] cpuidle: using governor menu
[ 0.470416] TCP cubic registered
[ 0.470597] NET: Registered protocol family 10
[ 0.471206] NET: Registered protocol family 17
[ 0.471227] Registering the dns_resolver key type
[ 0.471383] PM: Hibernation image not present or could not be loaded.
[ 0.471405] registered taskstats version 1
[ 0.472016] Magic number: 15:334:651
[ 0.472122] rtc_cmos rtc_cmos: setting system clock to 2011-06-07 21:37:30 UTC (1307482650)
[ 0.472127] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.472129] EDD information not available.
[ 0.494629] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.990102] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 1.008525] Freeing initrd memory: 19572k freed
[ 1.021131] Freeing unused kernel memory: 956k freed
[ 1.021632] Write protecting the kernel read-only data: 10240k
[ 1.022924] Freeing unused kernel memory: 184k freed
[ 1.031622] Freeing unused kernel memory: 1444k freed
[ 1.064191] <30>udev[58]: starting version 167
[ 1.278226] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.278274] r8169 0000:01:00.0: found PCI INT A -> IRQ 11
[ 1.278283] r8169 0000:01:00.0: sharing IRQ 11 with 0000:00:02.0
[ 1.278292] r8169 0000:01:00.0: sharing IRQ 11 with 0000:00:1a.0
[ 1.278312] r8169 0000:01:00.0: sharing IRQ 11 with 0000:00:1c.1
[ 1.278326] r8169 0000:01:00.0: sharing IRQ 11 with 0000:00:1d.2
[ 1.278617] r8169 0000:01:00.0: setting latency timer to 64
[ 1.278818] r8169 0000:01:00.0: irq 16 for MSI/MSI-X
[ 1.279432] r8169 0000:01:00.0: eth0: RTL8102e at 0xffffc9000177e000, d8:d3:85:01:18:fa, XID 04e00000 IRQ 16
[ 1.280027] usb 2-6: new high speed USB device using ehci_hcd and address 3
[ 1.330135] Switching to clocksource tsc
[ 1.337762] ahci 0000:00:1f.2: version 3.0
[ 1.337784] ahci 0000:00:1f.2: found PCI INT B -> IRQ 11
[ 1.337804] ahci 0000:00:1f.2: sharing IRQ 11 with 0000:00:1a.7
[ 1.337825] ahci 0000:00:1f.2: sharing IRQ 11 with 0000:00:1d.1
[ 1.338080] ahci 0000:00:1f.2: irq 17 for MSI/MSI-X
[ 1.338141] ahci: SSS flag set, parallel bus scan disabled
[ 1.338188] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.338194] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems
[ 1.338201] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.339137] [drm] Initialized drm 1.1.0 20060810
[ 1.391166] scsi0 : ahci
[ 1.391389] scsi1 : ahci
[ 1.391546] scsi2 : ahci
[ 1.391700] scsi3 : ahci
[ 1.391859] scsi4 : ahci
[ 1.392015] scsi5 : ahci
[ 1.392151] ata1: SATA max UDMA/133 abar m2048@0xd4504000 port 0xd4504100 irq 17
[ 1.392156] ata2: SATA max UDMA/133 abar m2048@0xd4504000 port 0xd4504180 irq 17
[ 1.392160] ata3: DUMMY
[ 1.392162] ata4: DUMMY
[ 1.392165] ata5: SATA max UDMA/133 abar m2048@0xd4504000 port 0xd4504300 irq 17
[ 1.392170] ata6: SATA max UDMA/133 abar m2048@0xd4504000 port 0xd4504380 irq 17
[ 1.392483] i915 0000:00:02.0: found PCI INT A -> IRQ 11
[ 1.392498] i915 0000:00:02.0: sharing IRQ 11 with 0000:00:1a.0
[ 1.392519] i915 0000:00:02.0: sharing IRQ 11 with 0000:00:1c.1
[ 1.392534] i915 0000:00:02.0: sharing IRQ 11 with 0000:00:1d.2
[ 1.392722] i915 0000:00:02.0: setting latency timer to 64
[ 1.510064] mtrr: no more MTRRs available
[ 1.510068] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 1.511064] i915 0000:00:02.0: irq 18 for MSI/MSI-X
[ 1.511072] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.511075] [drm] Driver supports precise vblank timestamp query.
[ 1.579854] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.622451] usbcore: registered new interface driver uas
[ 1.889812] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 2.008571] Console: switching to colour frame buffer device 160x50
[ 2.008606] fb0: inteldrmfb frame buffer device
[ 2.008609] drm: registered panic notifier
[ 2.008776] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.029969] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.089039] ata1.00: ATA-8: OCZ-VERTEX2, 1.32, max UDMA/133
[ 2.089044] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.168938] ata1.00: configured for UDMA/133
[ 2.169084] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.32 PQ: 0 ANSI: 5
[ 2.169300] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.169451] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 2.169563] sd 0:0:0:0: [sda] Write Protect is off
[ 2.169568] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.169605] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.170382] sda: sda1 sda2 < sda5 >
[ 2.170771] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.339772] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 2.509763] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.859729] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.209696] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.236596] Initializing USB Mass Storage driver...
[ 3.236751] scsi6 : usb-storage 2-6:1.0
[ 3.237156] usbcore: registered new interface driver usb-storage
[ 3.237160] USB Mass Storage support registered.
[ 4.232072] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 4.235632] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 4.239305] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 5.564111] usbcore: registered new interface driver usbhid
[ 5.564116] usbhid: USB HID core driver
[ 16.277467] Intel AES-NI instructions are not detected.
[ 16.746780] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 21.465991] Adding 8290300k swap on /dev/mapper/butler-swap_1. Priority:-1 extents:1 across:8290300k
[ 21.522773] <30>udev[416]: starting version 167
[ 21.527939] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,user_xattr
[ 21.604763] lp: driver loaded but no devices found
[ 21.824907] type=1400 audit(1307482671.842:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=545 comm="apparmor_parser"
[ 21.850580] type=1400 audit(1307482671.872:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=545 comm="apparmor_parser"
[ 21.851508] type=1400 audit(1307482671.872:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=545 comm="apparmor_parser"
[ 22.338371] r8169 0000:01:00.0: eth0: link down
[ 22.352057] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.489476] lib80211: common routines for IEEE802.11 drivers
[ 22.489482] lib80211_crypt: registered algorithm 'NULL'
[ 22.673500] wl: module license 'MIXED/Proprietary' taints kernel.
[ 22.673505] Disabling lock debugging due to kernel taint
[ 22.841907] type=1400 audit(1307482672.862:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=881 comm="apparmor_parser"
[ 22.846367] type=1400 audit(1307482672.862:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=882 comm="apparmor_parser"
[ 22.849525] type=1400 audit(1307482672.872:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=882 comm="apparmor_parser"
[ 22.850457] type=1400 audit(1307482672.872:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=882 comm="apparmor_parser"
[ 22.879629] type=1400 audit(1307482672.902:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=883 comm="apparmor_parser"
[ 22.928772] type=1400 audit(1307482672.952:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=883 comm="apparmor_parser"
[ 22.953295] type=1400 audit(1307482672.972:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=883 comm="apparmor_parser"
[ 23.666111] Linux video capture interface: v2.00
[ 23.671186] input: Wacom ISDv4 E3 Finger as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input1
[ 23.672888] uhci_hcd 0000:00:1a.1: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
[ 23.736178] uvcvideo: Found UVC 1.00 device HP Webcam (10f1:1a16)
[ 23.759574] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/input/input2
[ 23.760910] usbcore: registered new interface driver uvcvideo
[ 23.760914] USB Video Class driver (v1.0.0)
[ 23.771979] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400
[ 23.805497] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input3
[ 23.983101] wl 0000:02:00.0: found PCI INT A -> IRQ 11
[ 23.983131] wl 0000:02:00.0: sharing IRQ 11 with 0000:00:1c.0
[ 23.983185] wl 0000:02:00.0: setting latency timer to 64
[ 24.127842] lib80211_crypt: registered algorithm 'TKIP'
[ 24.209641] eth1: Broadcom BCM432b 802.11 Hybrid Wireless Controller 5.100.82.38
[ 24.617652] HDA Intel 0000:00:1b.0: found PCI INT A -> IRQ 10
[ 24.617671] HDA Intel 0000:00:1b.0: sharing IRQ 10 with 0000:00:1a.1
[ 24.625797] HDA Intel 0000:00:1b.0: irq 19 for MSI/MSI-X
[ 24.625838] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 24.748633] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[ 24.788581] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 24.788943] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 26.717999] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[ 29.787347] input: Wacom ISDv4 E3 Pen as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input6
[ 34.286863] usbcore: registered new interface driver wacom
[ 34.286868] wacom: v1.52:USB Wacom tablet driver
[ 34.443062] ppdev: user-space parallel port driver
[ 34.485969] audit_printk_skb: 9 callbacks suppressed
[ 34.485975] type=1400 audit(1307482684.502:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1435 comm="apparmor_parser"
[ 34.488201] type=1400 audit(1307482684.512:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1435 comm="apparmor_parser"
[ 34.976732] eth1: no IPv6 routers present