rendered paste bodysmartctl 5.40 2010-10-16 r3189 [x86_64-redhat-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10 family
Device Model: ST3250410AS
Serial Number: 6RY142TT
Firmware Version: 3.AAC
User Capacity: 250,058,268,160 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat Jun 4 15:52:37 2011 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 64) minutes.
SCT capabilities: (0x0001) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 114 096 006 Pre-fail Always - 58930345
3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 210
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 086 060 030 Pre-fail Always - 468815840
9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 21895
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 210
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 069 058 045 Old_age Always - 31 (Min/Max 31/33)
194 Temperature_Celsius 0x0022 031 042 000 Old_age Always - 31 (0 18 0 0)
195 Hardware_ECC_Recovered 0x001a 059 054 000 Old_age Always - 14286159
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 001 000 Old_age Always - 5011
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 7326 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 7326 occurred at disk power-on lifetime: 21895 hours (912 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 2e 51 1c ed
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 2e 51 1c ed 00 00:23:56.694 SET MAX ADDRESS EXT
27 00 00 2e 51 1c e0 00 00:24:02.580 READ NATIVE MAX ADDRESS EXT
37 00 00 2e 51 1c ed 00 00:24:02.580 SET MAX ADDRESS EXT
27 00 01 2e 51 1c e0 00 00:24:02.456 READ NATIVE MAX ADDRESS EXT
37 00 01 2e 51 1c ed 00 00:24:02.456 SET MAX ADDRESS EXT
Error 7325 occurred at disk power-on lifetime: 21895 hours (912 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 2e 51 1c ed
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 2e 51 1c ed 00 00:23:56.694 SET MAX ADDRESS EXT
27 00 00 2e 51 1c e0 00 00:23:56.694 READ NATIVE MAX ADDRESS EXT
37 00 00 2e 51 1c ed 00 00:23:56.694 SET MAX ADDRESS EXT
27 00 01 6f 59 1c e0 00 00:23:56.694 READ NATIVE MAX ADDRESS EXT
29 00 01 6f 59 1c e0 00 00:23:56.693 READ MULTIPLE EXT
Error 7324 occurred at disk power-on lifetime: 21894 hours (912 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 0f e1 cf 41 e0 Error: ICRC, ABRT 15 sectors at LBA = 0x0041cfe1 = 4313057
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 20 d0 cf 41 e0 00 03:23:03.292 READ DMA EXT
ec 00 00 00 00 00 a0 00 03:23:03.289 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 03:23:03.164 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 03:23:02.861 IDENTIFY DEVICE
00 00 20 00 00 00 00 04 03:22:57.830 NOP [Abort queued commands]
Error 7323 occurred at disk power-on lifetime: 21894 hours (912 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 0f e1 cf 41 e0 Error: ICRC, ABRT 15 sectors at LBA = 0x0041cfe1 = 4313057
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 20 d0 cf 41 e0 00 03:23:03.292 READ DMA EXT
ec 00 00 00 00 00 a0 00 03:23:03.289 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 03:23:03.164 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 03:23:02.861 IDENTIFY DEVICE
00 00 00 00 00 00 00 04 03:22:57.830 NOP [Abort queued commands]
Error 7322 occurred at disk power-on lifetime: 21894 hours (912 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 ef cf 41 e0 Error: ICRC, ABRT at LBA = 0x0041cfef = 4313071
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 20 d0 cf 41 e0 00 03:22:55.906 READ DMA EXT
ec 00 00 00 00 00 a0 00 03:22:55.903 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 03:22:55.900 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 03:22:55.897 IDENTIFY DEVICE
00 00 08 00 00 00 00 04 03:22:55.772 NOP [Abort queued commands]
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.