rendered paste body 16.495673] SGI XFS Quota Management subsystem
[ 16.495741] SELinux: Registering netfilter hooks
[ 16.501426] Initializing Cryptographic API
[ 16.501436] io scheduler noop registered
[ 16.501463] io scheduler anticipatory registered (default)
[ 16.501478] io scheduler deadline registered
[ 16.501507] io scheduler cfq registered
[ 16.533628] lp: driver loaded but no devices found
[ 16.533714] Real Time Clock Driver v1.12ac
[ 16.533779] toshiba: not a supported Toshiba laptop
[ 16.533917] i8k: unable to get SMM BIOS version
[ 16.533921] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
[ 16.537711] ppdev: user-space parallel port driver
[ 16.537716] Linux agpgart interface v0.101 (c) Dave Jones
[ 16.537846] vesafb: framebuffer at 0xe8000000, mapped to 0xe0a80000, using 3072k, total 32704k
[ 16.537852] vesafb: mode is 1024x768x16, linelength=2048, pages=20
[ 16.537855] vesafb: protected mode interface info at c000:57f3
[ 16.537859] vesafb: pmi: set display start = c00c5861, set palette = c00c589b
[ 16.537863] vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4
[ 16.537873] vesafb: scrolling: redraw
[ 16.537877] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 16.569467] Console: switching to colour frame buffer device 128x48
[ 16.599821] fbsplash: console 0 using theme 'default'
[ 16.925880] fbsplash: switched splash state to 'on' on console 0
[ 16.926280] fb0: VESA VGA frame buffer device
[ 16.926722] ACPI: AC Adapter [AC] (on-line)
[ 17.198503] ACPI: Battery Slot [BAT0] (battery present)
[ 17.198553] ACPI: Battery Slot [BAT1] (battery absent)
[ 17.198577] ACPI: Lid Switch [LID]
[ 17.198585] ACPI: Power Button (CM) [PBTN]
[ 17.198592] ACPI: Sleep Button (CM) [SBTN]
[ 17.199577] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 17.199596] Using specific hotkey driver
[ 17.200181] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 17.200188] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 17.212131] ACPI: Thermal Zone [THM] (44 C)
[ 17.212158] ibm_acpi: ec object not found
[ 17.212182] isapnp: Scanning for PnP cards...
[ 17.523758] isapnp: No Plug & Play device found
[ 17.523764] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 17.523922] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.524256] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 17.525174] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.525494] parport: PnPBIOS parport detected.
[ 17.525540] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 1.673000] lp0: using parport0 (interrupt-driven).
[ 1.673000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.677000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.677000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.677000] parport0: cannot grant exclusive access for device parkbd
[ 1.677000] mice: PS/2 mouse device common for all mice
[ 1.677000] ts: Compaq touchscreen protocol output
[ 1.687000] input: AT Translated Set 2 keyboard as /class/input/input0
[ 2.280000] input: DualPoint Stick as /class/input/input1
[ 2.302000] input: AlpsPS/2 ALPS DualPoint TouchPad as /class/input/input2
[ 4.688000] floppy0: no floppy controllers found
[ 4.688000] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[ 4.688000] loop: loaded (max 8 devices)
[ 4.688000] Compaq SMART2 Driver (v 2.6.0)
[ 4.688000] HP CISS Driver (v 3.6.10)
[ 4.689000] v2.3 : Micro Memory(tm) PCI memory board block driver
[ 4.689000] MM: desc_per_page = 128
[ 4.689000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 4.689000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 4.689000] ICH4: IDE controller at PCI slot 0000:00:1f.1
[ 4.689000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 4.689000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 4.689000] ICH4: chipset revision 1
[ 4.689000] ICH4: not 100% native mode: will probe irqs later
[ 4.689000] ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
[ 4.689000] ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio
[ 4.689000] Probing IDE interface ide0...
[ 4.953000] hda: IC25N020ATMR04-0, ATA DISK drive
[ 5.565000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.565000] Probing IDE interface ide1...
[ 6.237000] hdc: SONY DVD+/-RW DW-Q58A, ATAPI CD/DVD-ROM drive
[ 6.849000] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.850000] hda: max request size: 512KiB
[ 6.870000] hda: 39070080 sectors (20003 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(100)
[ 6.871000] hda: cache flushes supported
[ 6.871000] hda: hda1 hda2
[ 6.886000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 6.886000] Uniform CD-ROM driver Revision: 3.20
[ 6.887000] Loading iSCSI transport class v1.1-646.<5>iscsi: registered transport (tcp)
[ 6.887000] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[ 6.887000] Detecting Adaptec I2O RAID controllers...
[ 6.888000] Adaptec aacraid driver (1.1-5[2409]-mh2)
[ 6.888000] NCR53c406a: no available ports found
[ 6.888000] sym53c416.c: Version 1.0.0-ac
[ 6.888000] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
[ 6.888000] Emulex LightPulse Fibre Channel SCSI driver 8.1.9
[ 6.888000] Copyright(c) 2004-2006 Emulex. All rights reserved.
[ 6.910000] Failed initialization of WD-7000 SCSI card!
[ 6.910000] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 6.910000] megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
[ 6.910000] megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006
[ 6.910000] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 6.910000] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 6.910000] 3ware Storage Controller device driver for Linux v1.26.02.001.
[ 6.910000] 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
[ 6.910000] nsp32: loading...
[ 6.910000] ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29, 2006)
[ 6.910000] libata version 2.00 loaded.
[ 6.910000] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[ 6.911000] st: Version 20050830, fixed bufsize 32768, s/g segs 256
[ 6.911000] osst :I: Tape driver with OnStream support version 0.99.4
[ 6.911000] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 6.911000] I2O subsystem v1.325
[ 6.911000] i2o: max drivers = 8
[ 6.911000] I2O Configuration OSM v1.323
[ 6.911000] I2O Bus Adapter OSM v1.317
[ 6.911000] I2O Block Device OSM v1.325
[ 6.911000] I2O SCSI Peripheral OSM v1.316
[ 6.911000] I2O ProcFS OSM v1.316
[ 6.911000] Fusion MPT base driver 3.04.01
[ 6.911000] Copyright (c) 1999-2005 LSI Logic Corporation
[ 6.911000] Fusion MPT SPI Host driver 3.04.01
[ 6.911000] Fusion MPT FC Host driver 3.04.01
[ 6.911000] Fusion MPT SAS Host driver 3.04.01
[ 6.911000] Fusion MPT misc device (ioctl) driver 3.04.01
[ 6.911000] mptctl: Registered with Fusion MPT base driver
[ 6.911000] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 6.911000] Fusion MPT LAN driver 3.04.01
[ 6.911000] ieee1394: Initialized config rom entry `ip1394'
[ 6.911000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 6.911000] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 6.911000] usbmon: debugfs is not available
[ 6.911000] usbcore: registered new driver usblp
[ 6.911000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 6.911000] Initializing USB Mass Storage driver...
[ 6.911000] usbcore: registered new driver usb-storage
[ 6.911000] USB Mass Storage support registered.
[ 6.911000] usbcore: registered new driver libusual
[ 6.911000] usbcore: registered new driver hiddev
[ 6.911000] usbcore: registered new driver usbhid
[ 6.911000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 6.911000] md: linear personality registered for level -1
[ 6.911000] md: raid0 personality registered for level 0
[ 6.911000] md: raid1 personality registered for level 1
[ 6.911000] md: raid10 personality registered for level 10
[ 6.928000] raid6: int32x1 449 MB/s
[ 6.945000] raid6: int32x2 550 MB/s
[ 6.962000] raid6: int32x4 457 MB/s
[ 6.979000] raid6: int32x8 382 MB/s
[ 6.996000] raid6: mmxx1 1394 MB/s
[ 7.013000] raid6: mmxx2 1570 MB/s
[ 7.030000] raid6: sse1x1 1023 MB/s
[ 7.047000] raid6: sse1x2 1609 MB/s
[ 7.064000] raid6: sse2x1 1820 MB/s
[ 7.081000] raid6: sse2x2 1914 MB/s
[ 7.081000] raid6: using algorithm sse2x2 (1914 MB/s)
[ 7.081000] md: raid6 personality registered for level 6
[ 7.081000] md: raid5 personality registered for level 5
[ 7.081000] md: raid4 personality registered for level 4
[ 7.081000] raid5: automatically using best checksumming function: pIII_sse
[ 7.086000] pIII_sse : 3708.000 MB/sec
[ 7.086000] raid5: using function: pIII_sse (3708.000 MB/sec)
[ 7.086000] md: multipath personality registered for level -4
[ 7.086000] md: faulty personality registered for level -5
[ 7.086000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 7.086000] md: bitmap version 4.39
[ 7.086000] device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
[ 7.086000] EISA: Probing bus 0 at eisa.0
[ 7.086000] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
[ 7.086000] specify port
[ 7.086000] snd_cs4231: probe of snd_cs4231.0 failed with error -22
[ 7.086000] ALSA device list:
[ 7.086000] No soundcards found.
[ 7.087000] TCP bic registered
[ 7.087000] NET: Registered protocol family 1
[ 7.087000] NET: Registered protocol family 17
[ 7.127000] Using IPI No-Shortcut mode
[ 7.128000] Time: tsc clocksource has been installed.
[ 7.128000] ACPI: (supports S0 S1 S3 S4 S5)
[ 7.128000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 7.128000] Freeing unused kernel memory: 476k freed
[ 7.130000] Time: acpi_pm clocksource has been installed.
[ 7.373000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 7.373000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 7.373000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 7.373000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 7.373000] ehci_hcd 0000:00:1d.7: debug port 1
[ 7.373000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 7.373000] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00
[ 7.377000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 7.377000] usb usb1: configuration #1 chosen from 1 choice
[ 7.377000] hub 1-0:1.0: USB hub found
[ 7.377000] hub 1-0:1.0: 6 ports detected
[ 7.507000] USB Universal Host Controller Interface driver v3.0
[ 7.507000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 7.507000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 7.507000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.507000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 7.507000] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
[ 7.507000] usb usb2: configuration #1 chosen from 1 choice
[ 7.508000] hub 2-0:1.0: USB hub found
[ 7.508000] hub 2-0:1.0: 2 ports detected
[ 7.609000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 7.609000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 7.609000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.609000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 7.609000] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
[ 7.609000] usb usb3: configuration #1 chosen from 1 choice
[ 7.609000] hub 3-0:1.0: USB hub found
[ 7.609000] hub 3-0:1.0: 2 ports detected
[ 7.710000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 7.710000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 7.710000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.710000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 7.710000] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
[ 7.710000] usb usb4: configuration #1 chosen from 1 choice
[ 7.710000] hub 4-0:1.0: USB hub found
[ 7.710000] hub 4-0:1.0: 2 ports detected
[ 7.834000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 7.858000] sl811: driver sl811-hcd, 19 May 2005
[ 39.550000] kjournald starting. Commit interval 5 seconds
[ 39.550000] EXT3-fs: mounted filesystem with ordered data mode.
[ 46.766000] Yenta: CardBus bridge found at 0000:02:01.0 [1028:011d]
[ 46.766000] Yenta O2: res at 0x94/0xD4: 00/ea
[ 46.766000] Yenta O2: enabling read prefetch/write burst
[ 46.916000] Yenta: ISA IRQ mask 0x0418, PCI irq 11
[ 46.916000] Socket status: 30000410
[ 46.916000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 46.916000] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
[ 46.916000] cs: IO port probe 0xd000-0xefff: clean.
[ 46.916000] pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff
[ 46.916000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[ 46.917000] Yenta: CardBus bridge found at 0000:02:01.1 [1028:011d]
[ 46.932000] ieee80211_crypt: registered algorithm 'NULL'
[ 46.940000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 46.940000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 47.042000] Yenta: ISA IRQ mask 0x0418, PCI irq 11
[ 47.042000] Socket status: 30000410
[ 47.042000] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
[ 47.042000] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
[ 47.042000] cs: IO port probe 0xd000-0xefff: clean.
[ 47.043000] pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff
[ 47.043000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[ 47.051000] tg3.c:v3.65 (August 07, 2006)
[ 47.051000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 47.543000] pccard: PCMCIA card inserted into slot 0
[ 47.690000] pccard: PCMCIA card inserted into slot 1
[ 48.710000] eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:0d:56:e0:85:b4
[ 48.710000] eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
[ 48.710000] eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 48.745000] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[ 48.745000] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[ 48.746000] ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 48.747000] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[ 48.840000] input: PC Speaker as /class/input/input3
[ 48.906000] NET: Registered protocol family 23
[ 49.152000] i8xx TCO timer: initialized (0x0860). heartbeat=30 sec (nowayout=0)
[ 49.536000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 49.536000] PCI: Unable to reserve mem region #1:8000000@e8000000 for device 0000:01:00.0
[ 49.536000] radeonfb (0000:01:00.0): cannot request region 0.
[ 49.536000] radeonfb: probe of 0000:01:00.0 failed with error -16
[ 49.540000] agpgart: Detected an Intel 855PM Chipset.
[ 49.547000] agpgart: AGP aperture is 128M @ 0xe0000000
[ 49.547000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 49.547000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 50.358000] intel8x0_measure_ac97_clock: measured 50483 usecs
[ 50.358000] intel8x0: clocking to 48000
[ 55.765000] cs: memory probe 0xf6000000-0xfbffffff: excluding 0xf6000000-0xfa1fffff 0xfae00000-0xfb3fffff
[ 55.774000] pcmcia: registering new device pcmcia0.0
[ 55.957000] cs: IO port probe 0x100-0x3af: excluding 0x280-0x287
[ 56.010000] cs: IO port probe 0x3e0-0x4ff: clean.
[ 56.010000] cs: IO port probe 0x820-0x8ff: clean.
[ 56.010000] cs: IO port probe 0xc00-0xcf7: clean.
[ 56.011000] cs: IO port probe 0xa00-0xaff: clean.
[ 56.025000] cs: memory probe 0xf6000000-0xfbffffff: excluding 0xf6000000-0xfa7fffff 0xfae00000-0xfb3fffff
[ 56.028000] pcmcia: registering new device pcmcia1.0
[ 56.029000] cs: IO port probe 0x100-0x3af: excluding 0x280-0x287
[ 56.119000] cs: IO port probe 0x3e0-0x4ff: clean.
[ 56.120000] cs: IO port probe 0x820-0x8ff: clean.
[ 56.120000] cs: IO port probe 0xc00-0xcf7: clean.
[ 56.120000] cs: IO port probe 0xa00-0xaff: clean.
[ 56.206000] 0.0: ttyS2 at I/O 0x3e8 (irq = 3) is a 16550A
[ 67.748000] EXT3 FS on dm-0, internal journal
[ 68.307000] kjournald starting. Commit interval 5 seconds
[ 68.307000] EXT3 FS on hda1, internal journal
[ 68.307000] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.440000] Adding 1048568k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1048568k
[ 91.552000] fbsplash: console 1 using theme 'default'
[ 91.555000] fbsplash: switched splash state to 'on' on console 1
[ 91.560000] fbsplash: console 2 using theme 'default'
[ 91.564000] fbsplash: switched splash state to 'on' on console 2
[ 91.570000] fbsplash: console 3 using theme 'default'
[ 91.573000] fbsplash: switched splash state to 'on' on console 3
[ 91.728000] fbsplash: console 4 using theme 'default'
[ 91.784000] fbsplash: switched splash state to 'on' on console 4
[ 91.857000] fbsplash: console 5 using theme 'default'
[ 91.861000] fbsplash: switched splash state to 'on' on console 5
[ 91.864000] fbsplash: console 11 using theme 'default'
[ 91.867000] fbsplash: switched splash state to 'on' on console 11
[ 94.868000] [drm] Initialized drm 1.0.1 20051102
[ 94.927000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 96.233000] mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x2000000
[ 96.233000] mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x2000000
[ 96.233000] mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x2000000
[ 96.233000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 96.233000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 96.233000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 96.489000] [drm] Setting GART location based on new memory map
[ 96.489000] [drm] Loading R200 Microcode
[ 96.489000] [drm] writeback test succeeded in 2 usecs
[ 110.304000] PM: Writing back config space on device 0000:02:00.0 at offset c (was a4000000, writing 0)
[ 110.304000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 164714e4, writing 81261028)
[ 110.304000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 4008)
[ 110.304000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000002)
[ 110.304000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00104)
[ 110.304000] PM: Writing back config space on device 0000:02:00.0 at offset 0 (was 164714e4, writing 16a614e4)
[ 120.035000] Bridge firewalling registered
[ 434.124000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 434.124000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 434.124000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 434.124000] [drm] Loading R200 Microcode
[ 659.268000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 659.268000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 659.268000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 659.268000] [drm] Loading R200 Microcode
[ 673.041000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 164714e4, writing 81261028)
[ 673.041000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 4008)
[ 673.041000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000002)
[ 673.041000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00104)
[ 673.041000] PM: Writing back config space on device 0000:02:00.0 at offset 0 (was 164714e4, writing 16a614e4)
[ 673.529000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 164714e4, writing 81261028)
[ 673.529000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 4008)
[ 673.529000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000002)
[ 673.529000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00104)
[ 673.529000] PM: Writing back config space on device 0000:02:00.0 at offset 0 (was 164714e4, writing 16a614e4)
[ 677.996000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 164714e4, writing 81261028)
[ 677.996000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 4008)
[ 677.996000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000002)
[ 677.996000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00104)
[ 677.996000] PM: Writing back config space on device 0000:02:00.0 at offset 0 (was 164714e4, writing 16a614e4)
[ 678.600000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 164714e4, writing 81261028)
[ 678.600000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 4008)
[ 678.600000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000002)
[ 678.600000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00104)
[ 678.600000] PM: Writing back config space on device 0000:02:00.0 at offset 0 (was 164714e4, writing 16a614e4)
[ 1366.892000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 1366.892000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 1366.892000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 1366.892000] [drm] Loading R200 Microcode
[ 1416.449000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 164714e4, writing 81261028)
[ 1416.449000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 4008)
[ 1416.449000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000002)
[ 1416.449000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00104)
[ 1416.449000] PM: Writing back config space on device 0000:02:00.0 at offset 0 (was 164714e4, writing 16a614e4)
[ 1475.006000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 1475.006000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 1475.006000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 1475.006000] [drm] Loading R200 Microcode
[ 1536.993000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 1536.993000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 1536.993000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 1536.993000] [drm] Loading R200 Microcode
[ 1959.947000] ndiswrapper version 1.17 loaded (preempt=no,smp=yes)
[ 1960.020000] ndiswrapper (wrapper_init:134): loadndiswrapper failed (1792); check system log for messages from 'loadndisdriver'
[ 1960.020000] ndiswrapper (wrapper_init:141): ndiswrapper: initialization failed
[ 1960.057000] ndiswrapper version 1.17 loaded (preempt=no,smp=yes)
[ 1960.059000] ndiswrapper (wrapper_init:134): loadndiswrapper failed (1792); check system log for messages from 'loadndisdriver'
[ 1960.059000] ndiswrapper (wrapper_init:141): ndiswrapper: initialization failed
[ 1960.096000] ndiswrapper version 1.17 loaded (preempt=no,smp=yes)
[ 1960.099000] ndiswrapper (wrapper_init:134): loadndiswrapper failed (1792); check system log for messages from 'loadndisdriver'
[ 1960.099000] ndiswrapper (wrapper_init:141): ndiswrapper: initialization failed
[ 1960.135000] ndiswrapper version 1.17 loaded (preempt=no,smp=yes)
[ 1960.138000] ndiswrapper (wrapper_init:134): loadndiswrapper failed (1792); check system log for messages from 'loadndisdriver'
[ 1960.138000] ndiswrapper (wrapper_init:141): ndiswrapper: initialization failed
[ 2021.166000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 2021.166000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 2021.166000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 2021.166000] [drm] Loading R200 Microcode
[ 3492.283000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 3492.283000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 3492.283000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 3492.283000] [drm] Loading R200 Microcode
[ 3499.083000] mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x2000000
[ 3499.083000] mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x2000000
[ 3499.083000] mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x2000000
[ 3499.083000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 3499.083000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 3499.083000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 3499.297000] [drm] Setting GART location based on new memory map
[ 3499.297000] [drm] Loading R200 Microcode
[ 3499.297000] [drm] writeback test succeeded in 2 usecs
[ 3672.647000] hda: dma_timer_expiry: dma status == 0x21
[ 3682.647000] hda: DMA timeout error
[ 3682.647000] hda: dma timeout error: status=0xd0 { Busy }
[ 3682.647000] ide: failed opcode was: unknown
[ 3682.647000] hda: DMA disabled
[ 3682.697000] ide0: reset: success
[ 3943.864000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 3943.864000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 3943.864000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 3943.864000] [drm] Loading R200 Microcode
[ 4242.026000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 4242.026000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 4242.026000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 4242.026000] [drm] Loading R200 Microcode
[ 5073.578000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 5073.578000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 5073.578000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 5073.578000] [drm] Loading R200 Microcode
[ 9426.678000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 9426.678000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 9426.678000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 9426.678000] [drm] Loading R200 Microcode
[11839.175000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[11839.175000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[11839.175000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[11839.175000] [drm] Loading R200 Microcode
[12113.981000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[12113.981000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[12115.569000] intel8x0_measure_ac97_clock: measured 238713 usecs
[12115.569000] intel8x0: clocking to 48000
[12140.433000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[12140.433000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[12140.433000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[12140.433000] [drm] Loading R200 Microcode
[12293.736000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[12293.736000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[12293.736000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[12293.736000] [drm] Loading R200 Microcode
[12320.056000] gameport: kgameportd exiting
[12442.386000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[12442.386000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[12442.386000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[12442.386000] [drm] Loading R200 Microcode
[12456.895000] mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x2000000
[12456.895000] mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x2000000
[12456.895000] mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x2000000
[12456.895000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[12456.895000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[12456.895000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[12457.115000] [drm] Setting GART location based on new memory map
[12457.115000] [drm] Loading R200 Microcode
[12457.115000] [drm] writeback test succeeded in 2 usecs
[12539.549000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[12539.549000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[12540.558000] intel8x0_measure_ac97_clock: measured 113478 usecs
[12540.558000] intel8x0: clocking to 48000
[12560.858000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[12560.858000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[12560.858000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[12560.858000] [drm] Loading R200 Microcode
[12610.250000] mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x2000000
[12610.250000] mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x2000000
[12610.250000] mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x2000000
[12610.250000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[12610.250000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[12610.250000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[12610.464000] [drm] Setting GART location based on new memory map
[12610.464000] [drm] Loading R200 Microcode
[12610.464000] [drm] writeback test succeeded in 2 usecs
[12860.566000] mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x2000000
[12860.566000] mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x2000000
[12860.566000] mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x2000000
[12860.566000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[12860.566000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[12860.566000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[12860.776000] [drm] Setting GART location based on new memory map
[12860.776000] [drm] Loading R200 Microcode
[12860.776000] [drm] writeback test succeeded in 2 usecs