Anonymous
public text v1 · immutableHit any key to stop autoboot: 0
ARV4518 => tftp 0x80700000 openwrt
Using lq_cpe_eth device
TFTP from server 192.168.10.5; our IP address is 192.168.10.168
Filename 'openwrt'.
Load address: 0x80700000
Loading: #################################################################
#################################################################
#################################################################
##############################
done
Bytes transferred = 3290464 (323560 hex)
ARV4518 => bootm
## Booting kernel from Legacy Image at 80700000 ...
Image Name: MIPS OpenWrt Linux-2.6.37.4
Created: 2011-05-31 17:01:50 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 3290400 Bytes = 3.1 MB
Load Address: 80002000
Entry Point: 80002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting kernel ...
Linux version 2.6.37.4 (luca@po68) (gcc version 4.5.2 (Linaro GCC 4.5-2011.02-0) ) #30 Tue May 31 19:01:45 CEST 2011
cpu: 333333334
fpi: 83333333
io: 83250000
SoC: Danube rev1.5 333Mhz
bootconsole [early0] enabled
CPU revision is: 00019641 (MIPS 24Kc)
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00004000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: ath9k_regdomain=0x82d4 ath9k_caps=0x1f1f console=ttyS1,115200 rootfstype=squashfs,jffs2 machtype=ARV7518PW
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
Writing ErrCtl register=0007fad8
Readback ErrCtl register=0007fad8
Memory: 59884k/65536k available (2105k kernel code, 5652k reserved, 351k data, 2460k init, 0k highmem)
NR_IRQS:256
Calibrating delay loop... 221.69 BogoMIPS (lpj=443392)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is ARV7518PW - ASTORIA
changed ath9k regdomain to 0x82d4
changed ath9k caps to 0x1f1f
bio: create slab <bio-0> at 0
pci 0000:00:0e.0: fixup device configuration
pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
pci 0000:00:0e.0: BAR 0: set to [mem 0x18000000-0x1800ffff] (PCI address [0x18000000-0x1800ffff])
arch/mips/pci/pci-lantiq.c:pcibios_map_irq[263]14 1
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
gptu: totally 6 16-bit timers/counters
gptu: misc_register on minor 63
gptu: succeeded to request irq 126
gptu: succeeded to request irq 127
gptu: succeeded to request irq 128
gptu: succeeded to request irq 129
gptu: succeeded to request irq 130
gptu: succeeded to request irq 131
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
msgmni has been set to 116
io scheduler noop registered
io scheduler deadline registered (default)
lq_asc.0: ttyS0 at MMIO 0x1e100400 (irq = 104) is a lq_asc
lq_asc.1: ttyS1 at MMIO 0x1e100c00 (irq = 112) is a lq_asc
console [ttyS1] enabled, bootconsole disabled
console [ttyS1] enabled, bootconsole disabled
lq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x00007f Chip ID 0x0022cb
Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query version 1.1.
number of CFI chips: 1
Creating 4 MTD partitions on "lq_nor":
0x000000000000-0x000000010000 : "uboot"
0x000000010000-0x000000020000 : "uboot_env"
0x000000020000-0x0000007f0000 : "linux"
no uImage found in linux partition
Can't split linux partition
0x0000007f0000-0x000000800000 : "board_config"
eth0: using mac=00:26:4D:6A:49:D3
lq_mii: probed
eth0: AR8216 switch driver attached.
eth0: attached PHY driver [Atheros AR8216/AR8316] (mii_bus:phy_addr=0:00, irq=-1)
lq_etop: driver loaded!
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Freeing unused kernel memory: 2460k freed
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -
Please press Enter to activate this console. device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering forwarding state
br-lan: port 1(eth0) entering forwarding state
IFXOS, Version 1.5.12 (c) Copyright 2009, Lantiq Deutschland GmbH
Compat-wireless backport release: compat-wireless-2011-01-31-26-gf7606f5
Backport based on wireless-testing.git master-2011-03-24
cfg80211: Calling CRDA to update world regulatory domain
Lantiq TAPI device driver, version 3.13.0.2, (c) 2001-2010 Lantiq Deutschland GmbH
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Lantiq MIPS24KEc MPS driver, version 2.2.2.5, (c) 2006-2010 Lantiq Deutschland GmbH
request_timer(3, 0x000001AE, 1)...successful!
Lantiq VMMC device driver, version 1.9.0.3, (c) 2006-2010 Lantiq Deutschland GmbH
Lantiq KPI2UDP driver, version 2.2.0.0, (c) 2008-2010 Lantiq Deutschland GmbH
PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
Length 3256 (0xcb8) 3256
version 0xe010
regDmn[0] 0x82d4
regDmn[1] 0x1f1f
rfSilent 0x0
blueToothOptions 0x0
deviceCap 0x0
Modal header 0
=============
antCtrlCommon 0x0
antCtrlChain[0] 0x0
antCtrlChain[1] 0x0
antCtrlChain[2] 0x0
spurChans[0].spurChan 0x8000
spurChans[1].spurChan 0x0
spurChans[2].spurChan 0x0
spurChans[3].spurChan 0x0
spurChans[4].spurChan 0x0
Modal header 1
=============
antCtrlCommon 0x120
antCtrlChain[0] 0x150
antCtrlChain[1] 0x150
antCtrlChain[2] 0x0
spurChans[0].spurChan 0x8000
spurChans[1].spurChan 0x0
spurChans[2].spurChan 0x0
spurChans[3].spurChan 0x0
spurChans[4].spurChan 0x0
ath: eeprom contains invalid mac address: ff:ff:ff:ff:ff:ff
ath: random mac address will be used: 6a:f5:17:af:9d:f1
ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb8000000, irq=30
NET: Registered protocol family 8
NET: Registered protocol family 20
PPP generic driver version 2.4.2
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: ES
ip_tables: (C) 2000-2006 Netfilter Core Team
cfg80211: Regulatory domain changed to country: ES
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
NET: Registered protocol family 24
nf_conntrack version 0.5.0 (974 buckets, 3896 max)
IFX MEI Version 5.00.00
Infineon CPE API Driver version: DSL CPE API V3.24.4.4
Infineon Technologies ATM driver version 1.0.8
Infineon Technologies ATM (A1) firmware version 0.1
ifxmips_atm: ATM init succeed
dwc_otg: version 2.60a 22-NOV-2006
DWC_otg: Using DMA mode
dwc_otg dwc_otg.0: DWC OTG Controller
dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
dwc_otg dwc_otg.0: irq 62, io mem 0xffffffffbe101000
DWC_otg: Init: Port Power? op_state=1
DWC_otg: Init: Power Port (0)
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
DISCONNECTED PORT
BusyBox v1.17.3 (2011-04-03 15:27:39 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
ATTITUDE ADJUSTMENT (bleeding edge, r26437) ----------
* 1/4 oz Vodka Pour all ingredents into mixing
* 1/4 oz Gin tin with ice, strain into glass.
* 1/4 oz Amaretto
* 1/4 oz Triple sec
* 1/4 oz Peach schnapps
* 1/4 oz Sour mix
* 1 splash Cranberry juice
-----------------------------------------------------
root@OpenWrt:/#
WARNING: FW version 12.1.0 too old. Minimum required FW version is 12.4.0
root@OpenWrt:/# ifconfig br-lan 192.168.10.168
root@OpenWrt:/# route add default gw 192.168.10.102
root@OpenWrt:/# echo "nameserver 192.168.10.5" > /etc/resolv.conf
root@OpenWrt:/# ping www.google.com
PING www.google.com (74.125.43.104): 56 data bytes
64 bytes from 74.125.43.104: seq=0 ttl=49 time=65.613 ms
64 bytes from 74.125.43.104: seq=1 ttl=49 time=62.833 ms
^C
--- www.google.com ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 62.833/64.223/65.613 ms
root@OpenWrt:/# passwd
Changing password for root
New password:
Bad password: too short
Retype password:
Password for root changed by root
root@OpenWrt:/# echo "shutdown[]" | svd_if
{"shutdown":"starting"}
root@OpenWrt:/# ps | grep svd
1063 root 1436 S grep svd
root@OpenWrt:/# svd
root@OpenWrt:/#
WARNING: FW version 12.1.0 too old. Minimum required FW version is 12.4.0