rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-8-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=a11e43a1-4ac5-4d02-8cb0-90c25f9ce9b3 ro quiet splash vt.handoff=7
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000077e70000 (usable)
[ 0.000000] BIOS-e820: 0000000077e70000 - 0000000077e83000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000077e83000 - 0000000077e85000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000077e85000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: TOSHIBA Satellite P205D/JASAA, BIOS V1.20 10/12/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x77e70 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f7300] f7300
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000077e70000
[ 0.000000] 0000000000 - 0077e00000 page 2M
[ 0.000000] 0077e00000 - 0077e70000 page 4k
[ 0.000000] kernel direct mapping tables up to 77e70000 @ 1fffc000-20000000
[ 0.000000] RAMDISK: 35b74000 - 36db2000
[ 0.000000] ACPI: RSDP 00000000000f7260 00024 (v02 TOSCPL)
[ 0.000000] ACPI: XSDT 0000000077e7aa18 00064 (v01 TOSCPL TOSCPL00 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0000000077e828f7 000F4 (v03 TOSCPL Herring 06040000 ATI 000F4240)
[ 0.000000] ACPI: DSDT 0000000077e7aa7c 07E7B (v01 TOSCPL SB600 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0000000077e84fc0 00040
[ 0.000000] ACPI: TCPA 0000000077e82a5f 00032 (v02 TOSCPL 06040000 PTEC 00000000)
[ 0.000000] ACPI: SLIC 0000000077e82a91 00176 (v01 TOSCPL TOSCPL00 06040000 LOHR 00000000)
[ 0.000000] ACPI: SSDT 0000000077e82c07 00206 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 0000000077e82e0d 00054 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 0000000077e82e61 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 0000000077e82e9d 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: ASF! 0000000077e82ed5 0012B (v32 DMA AMDTBL 06040000 PTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000077e70000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000077e70000
[ 0.000000] NODE_DATA [0000000077e6b000 - 0000000077e6ffff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880075800000-ffff8800773fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00077e70
[ 0.000000] On node 0 totalpages: 491005
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3919 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6659 pages used for memmap
[ 0.000000] DMA32 zone: 480365 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880077c00000 s84416 r8192 d22080 u1048576
[ 0.000000] pcpu-alloc: s84416 r8192 d22080 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 484284
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=a11e43a1-4ac5-4d02-8cb0-90c25f9ce9b3 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 1c00000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 1902976k/1964480k available (5940k kernel code, 460k absent, 61044k reserved, 5017k data, 956k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 19660800 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1895.060 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.020007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3790.12 BogoMIPS (lpj=18950600)
[ 0.020012] pid_max: default: 32768 minimum: 301
[ 0.020047] Security Framework initialized
[ 0.020069] AppArmor: AppArmor initialized
[ 0.020071] Yama: becoming mindful.
[ 0.020377] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.021855] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.022461] Mount-cache hash table entries: 256
[ 0.022643] Initializing cgroup subsys ns
[ 0.022648] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.022651] Initializing cgroup subsys cpuacct
[ 0.022657] Initializing cgroup subsys memory
[ 0.022669] Initializing cgroup subsys devices
[ 0.022672] Initializing cgroup subsys freezer
[ 0.022675] Initializing cgroup subsys net_cls
[ 0.022678] Initializing cgroup subsys blkio
[ 0.022724] tseg: 0077f00000
[ 0.022727] CPU: Physical Processor ID: 0
[ 0.022728] CPU: Processor Core ID: 0
[ 0.022731] mce: CPU supports 5 MCE banks
[ 0.022745] using C1E aware idle routine
[ 0.024929] ACPI: Core revision 20110112
[ 0.024934] TOSHIBA Satellite detected - force copy of DSDT to local memory
[ 0.025083] ACPI: Forced DSDT copy: length 0x07E7B copied locally, original unmapped
[ 0.040013] ftrace: allocating 24314 entries in 96 pages
[ 0.050124] Setting APIC routing to flat
[ 0.050458] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.060000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.060000] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.060000] ..... (found apic 0 pin 0) ...
[ 0.169338] ....... works.
[ 0.169340] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 02
[ 0.170000] Performance Events: AMD PMU driver.
[ 0.170000] ... version: 0
[ 0.170000] ... bit width: 48
[ 0.170000] ... generic registers: 4
[ 0.170000] ... value mask: 0000ffffffffffff
[ 0.170000] ... max period: 00007fffffffffff
[ 0.170000] ... fixed-purpose events: 0
[ 0.170000] ... event mask: 000000000000000f
[ 0.170000] Booting Node 0, Processors #1 Ok.
[ 0.030000] System has AMD C1E enabled
[ 0.030000] Switch to broadcast mode on CPU1
[ 0.320125] Brought up 2 CPUs
[ 0.320128] Total of 2 processors activated (7580.65 BogoMIPS).
[ 0.320382] Switch to broadcast mode on CPU0
[ 0.320382] devtmpfs: initialized
[ 0.321276] print_constraints: dummy:
[ 0.321310] Time: 5:17:29 Date: 05/26/11
[ 0.321367] NET: Registered protocol family 16
[ 0.321421] Trying to unpack rootfs image as initramfs...
[ 0.321548] node 0 link 0: io port [1000, fffff]
[ 0.321552] TOM: 0000000080000000 aka 2048M
[ 0.321555] node 0 link 0: mmio [f8100000, ffffffff]
[ 0.321559] node 0 link 0: mmio [f8000000, f80fffff]
[ 0.321562] node 0 link 0: mmio [f8000000, f7ffffff]
[ 0.321565] node 0 link 0: mmio [f0000000, f7ffffff]
[ 0.321568] node 0 link 0: mmio [a0000, bffff]
[ 0.321571] node 0 link 0: mmio [f0000000, efffffff]
[ 0.321573] node 0 link 0: mmio [e0000000, efffffff]
[ 0.321576] node 0 link 0: mmio [80000000, dfffffff]
[ 0.321580] bus: [00, ff] on node 0 link 0
[ 0.321583] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.321586] bus: 00 index 1 [mem 0x80000000-0xfcffffffff]
[ 0.321588] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.321609] ACPI: bus type pci registered
[ 0.321708] PCI: MMCONFIG for domain 0000 [bus 00-1d] at [mem 0xe0000000-0xe1dfffff] (base 0xe0000000)
[ 0.321713] PCI: MMCONFIG at [mem 0xe0000000-0xe1dfffff] reserved in E820
[ 0.324266] PCI: Using configuration type 1 for base access
[ 0.325393] bio: create slab <bio-0> at 0
[ 0.326814] ACPI: EC: Look up EC in DSDT
[ 0.327527] ACPI Error: No handler for Region [ERAM] (ffff880073133d80) [EmbeddedControl] (20110112/evregion-369)
[ 0.327534] ACPI Error: Region EmbeddedControl(0x3) has no handler (20110112/exfldio-292)
[ 0.327541] ACPI Error: Method parse/execution failed [\_SB_.HTEV] (Node ffff880073130780), AE_NOT_EXIST (20110112/psparse-536)
[ 0.327551] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC0.EC0_._REG] (Node ffff88007313a078), AE_NOT_EXIST (20110112/psparse-536)
[ 0.330741] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.350037] ACPI: Interpreter enabled
[ 0.350041] ACPI: (supports S0 S3 S4 S5)
[ 0.350065] ACPI: Using IOAPIC for interrupt routing
[ 0.350881] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.500528] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.501037] ACPI: EC: GPE = 0x13, I/O: command/status = 0x66, data = 0x62
[ 0.501254] ACPI: No dock devices found.
[ 0.501257] HEST: Table not found.
[ 0.501261] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.502414] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.504695] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.504699] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d1fff] (ignored)
[ 0.504703] pci_root PNP0A08:00: host bridge window [mem 0x000d2000-0x000d3fff] (ignored)
[ 0.504706] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff] (ignored)
[ 0.504710] pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff] (ignored)
[ 0.504713] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff] (ignored)
[ 0.504716] pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff] (ignored)
[ 0.504720] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff] (ignored)
[ 0.504723] pci_root PNP0A08:00: host bridge window [mem 0x000de000-0x000dffff] (ignored)
[ 0.504727] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored)
[ 0.504730] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] (ignored)
[ 0.504734] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.504737] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.504748] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600
[ 0.504782] pci 0000:00:01.0: [1002:7912] type 1 class 0x000604
[ 0.504826] pci 0000:00:05.0: [1002:7915] type 1 class 0x000604
[ 0.504855] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.504859] pci 0000:00:05.0: PME# disabled
[ 0.504876] pci 0000:00:06.0: [1002:7916] type 1 class 0x000604
[ 0.504904] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.504907] pci 0000:00:06.0: PME# disabled
[ 0.504923] pci 0000:00:07.0: [1002:7917] type 1 class 0x000604
[ 0.504951] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.504954] pci 0000:00:07.0: PME# disabled
[ 0.504993] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101
[ 0.505013] pci 0000:00:12.0: reg 10: [io 0x8440-0x8447]
[ 0.505025] pci 0000:00:12.0: reg 14: [io 0x8434-0x8437]
[ 0.505036] pci 0000:00:12.0: reg 18: [io 0x8438-0x843f]
[ 0.505048] pci 0000:00:12.0: reg 1c: [io 0x8430-0x8433]
[ 0.505059] pci 0000:00:12.0: reg 20: [io 0x8400-0x840f]
[ 0.505071] pci 0000:00:12.0: reg 24: [mem 0xf8709000-0xf87093ff]
[ 0.505095] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.505128] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
[ 0.505144] pci 0000:00:13.0: reg 10: [mem 0xf8704000-0xf8704fff]
[ 0.505221] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
[ 0.505237] pci 0000:00:13.1: reg 10: [mem 0xf8705000-0xf8705fff]
[ 0.505311] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
[ 0.505327] pci 0000:00:13.2: reg 10: [mem 0xf8706000-0xf8706fff]
[ 0.505401] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
[ 0.505417] pci 0000:00:13.3: reg 10: [mem 0xf8707000-0xf8707fff]
[ 0.505491] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
[ 0.505509] pci 0000:00:13.4: reg 10: [mem 0xf8708000-0xf8708fff]
[ 0.505589] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
[ 0.505611] pci 0000:00:13.5: reg 10: [mem 0xf8709400-0xf87094ff]
[ 0.505691] pci 0000:00:13.5: supports D1 D2
[ 0.505693] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.505699] pci 0000:00:13.5: PME# disabled
[ 0.505725] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.505751] pci 0000:00:14.0: reg 10: [io 0x8410-0x841f]
[ 0.505838] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
[ 0.505853] pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7]
[ 0.505865] pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7]
[ 0.505877] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.505888] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.505900] pci 0000:00:14.1: reg 20: [io 0x8420-0x842f]
[ 0.505944] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.505969] pci 0000:00:14.2: reg 10: [mem 0xf8700000-0xf8703fff 64bit]
[ 0.506035] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.506040] pci 0000:00:14.2: PME# disabled
[ 0.506060] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
[ 0.506144] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.506198] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.506224] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.506244] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.506264] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.506297] PCI: peer root bus 00 res updated from pci conf
[ 0.506327] pci 0000:01:05.0: [1002:791f] type 0 class 0x000300
[ 0.506339] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.506347] pci 0000:01:05.0: reg 18: [mem 0xf8100000-0xf810ffff 64bit]
[ 0.506353] pci 0000:01:05.0: reg 20: [io 0x9000-0x90ff]
[ 0.506360] pci 0000:01:05.0: reg 24: [mem 0xf8000000-0xf80fffff]
[ 0.506374] pci 0000:01:05.0: supports D1 D2
[ 0.506395] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.506400] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.506404] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf81fffff]
[ 0.506409] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.506435] pci 0000:00:05.0: PCI bridge to [bus 0b-10]
[ 0.506440] pci 0000:00:05.0: bridge window [io 0x0000-0x0000] (disabled)
[ 0.506445] pci 0000:00:05.0: bridge window [mem 0x00000000-0x000fffff] (disabled)
[ 0.506450] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.506497] pci 0000:11:00.0: [10ec:8136] type 0 class 0x000200
[ 0.506514] pci 0000:11:00.0: reg 10: [io 0xa000-0xa0ff]
[ 0.506543] pci 0000:11:00.0: reg 18: [mem 0xf8300000-0xf8300fff 64bit]
[ 0.506575] pci 0000:11:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.506614] pci 0000:11:00.0: supports D1 D2
[ 0.506617] pci 0000:11:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.506623] pci 0000:11:00.0: PME# disabled
[ 0.506644] pci 0000:11:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.506655] pci 0000:00:06.0: PCI bridge to [bus 11-11]
[ 0.506659] pci 0000:00:06.0: bridge window [io 0xa000-0xafff]
[ 0.506663] pci 0000:00:06.0: bridge window [mem 0xf8300000-0xf83fffff]
[ 0.506668] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.506714] pci 0000:17:00.0: [168c:001c] type 0 class 0x000200
[ 0.506734] pci 0000:17:00.0: reg 10: [mem 0xf8200000-0xf820ffff 64bit]
[ 0.506825] pci 0000:17:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.506834] pci 0000:00:07.0: PCI bridge to [bus 17-17]
[ 0.506839] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.506843] pci 0000:00:07.0: bridge window [mem 0xf8200000-0xf82fffff]
[ 0.506848] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.506890] pci 0000:1d:04.0: [104c:8039] type 2 class 0x000607
[ 0.506916] pci 0000:1d:04.0: reg 10: [mem 0xf8404000-0xf8404fff]
[ 0.506944] pci 0000:1d:04.0: supports D1 D2
[ 0.506946] pci 0000:1d:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.506953] pci 0000:1d:04.0: PME# disabled
[ 0.506979] pci 0000:1d:04.1: [104c:803a] type 0 class 0x000c00
[ 0.507006] pci 0000:1d:04.1: reg 10: [mem 0xf8406000-0xf84067ff]
[ 0.507021] pci 0000:1d:04.1: reg 14: [mem 0xf8400000-0xf8403fff]
[ 0.507109] pci 0000:1d:04.1: supports D1 D2
[ 0.507111] pci 0000:1d:04.1: PME# supported from D0 D1 D2 D3hot
[ 0.507117] pci 0000:1d:04.1: PME# disabled
[ 0.507144] pci 0000:1d:04.2: [104c:803b] type 0 class 0x000180
[ 0.507169] pci 0000:1d:04.2: reg 10: [mem 0xf8405000-0xf8405fff]
[ 0.507264] pci 0000:1d:04.2: supports D1 D2
[ 0.507267] pci 0000:1d:04.2: PME# supported from D0 D1 D2 D3hot
[ 0.507273] pci 0000:1d:04.2: PME# disabled
[ 0.507298] pci 0000:1d:04.3: [104c:803c] type 0 class 0x000805
[ 0.507323] pci 0000:1d:04.3: reg 10: [mem 0xf8406800-0xf84068ff]
[ 0.507418] pci 0000:1d:04.3: supports D1 D2
[ 0.507420] pci 0000:1d:04.3: PME# supported from D0 D1 D2 D3hot
[ 0.507426] pci 0000:1d:04.3: PME# disabled
[ 0.507489] pci 0000:00:14.4: PCI bridge to [bus 1d-1e] (subtractive decode)
[ 0.507495] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.507501] pci 0000:00:14.4: bridge window [mem 0xf8400000-0xf84fffff]
[ 0.507506] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.507510] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.507514] pci 0000:00:14.4: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
[ 0.507518] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.507570] pci_bus 0000:1e: [bus 1e-21] partially hidden behind transparent bridge 0000:1d [bus 1d-1e]
[ 0.507592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.507735] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.507808] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.507875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 0.507944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT]
[ 0.508061] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.508147] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.508216] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.508253] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.516514] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.516577] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.516639] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.516699] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.516760] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.516821] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.516883] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.516945] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.517121] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.517129] vgaarb: loaded
[ 0.517405] SCSI subsystem initialized
[ 0.517524] libata version 3.00 loaded.
[ 0.517598] usbcore: registered new interface driver usbfs
[ 0.517613] usbcore: registered new interface driver hub
[ 0.517647] usbcore: registered new device driver usb
[ 0.517800] wmi: Mapper loaded
[ 0.517803] PCI: Using ACPI for IRQ routing
[ 0.517806] PCI: pci_cache_line_size set to 64 bytes
[ 0.517950] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.517953] reserve RAM buffer: 0000000077e70000 - 0000000077ffffff
[ 0.518100] NetLabel: Initializing
[ 0.518102] NetLabel: domain hash size = 128
[ 0.518104] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.518128] NetLabel: unlabeled traffic allowed by default
[ 0.518192] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.518197] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.520055] Switching to clocksource hpet
[ 0.529665] Switched to NOHz mode on CPU #1
[ 0.529670] Switched to NOHz mode on CPU #0
[ 0.530826] AppArmor: AppArmor Filesystem Enabled
[ 0.530880] pnp: PnP ACPI init
[ 0.530908] ACPI: bus type pnp registered
[ 0.532145] pnp 00:00: [bus 00-ff]
[ 0.532149] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.532152] pnp 00:00: [mem 0x000c0000-0x000c1fff window]
[ 0.532155] pnp 00:00: [mem 0x000c2000-0x000c3fff window]
[ 0.532158] pnp 00:00: [mem 0x000c4000-0x000c5fff window]
[ 0.532161] pnp 00:00: [mem 0x000c6000-0x000c7fff window]
[ 0.532164] pnp 00:00: [mem 0x000c8000-0x000c9fff window]
[ 0.532167] pnp 00:00: [mem 0x000ca000-0x000cbfff window]
[ 0.532170] pnp 00:00: [mem 0x000cc000-0x000cdfff window]
[ 0.532173] pnp 00:00: [mem 0x000ce000-0x000cffff window]
[ 0.532176] pnp 00:00: [mem 0x000d0000-0x000d1fff window]
[ 0.532179] pnp 00:00: [mem 0x000d2000-0x000d3fff window]
[ 0.532182] pnp 00:00: [mem 0x000d4000-0x000d5fff window]
[ 0.532185] pnp 00:00: [mem 0x000d6000-0x000d7fff window]
[ 0.532191] pnp 00:00: [mem 0x000d8000-0x000d9fff window]
[ 0.532194] pnp 00:00: [mem 0x000da000-0x000dbfff window]
[ 0.532197] pnp 00:00: [mem 0x000dc000-0x000ddfff window]
[ 0.532200] pnp 00:00: [mem 0x000de000-0x000dffff window]
[ 0.532203] pnp 00:00: [mem 0x000e0000-0x000e1fff window]
[ 0.532206] pnp 00:00: [mem 0x000e2000-0x000e3fff window]
[ 0.532209] pnp 00:00: [mem 0x000e4000-0x000e5fff window]
[ 0.532212] pnp 00:00: [mem 0x000e6000-0x000e7fff window]
[ 0.532215] pnp 00:00: [mem 0x000e8000-0x000e9fff window]
[ 0.532218] pnp 00:00: [mem 0x000ea000-0x000ebfff window]
[ 0.532221] pnp 00:00: [mem 0x000ec000-0x000edfff window]
[ 0.532224] pnp 00:00: [mem 0x000ee000-0x000effff window]
[ 0.532227] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[ 0.532230] pnp 00:00: [mem 0xf0000000-0xffffffff window]
[ 0.532233] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.532236] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.532239] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.532337] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.532408] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.532411] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.532514] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.532518] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.532522] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.533054] pnp 00:02: [io 0x0000-0x001f]
[ 0.533057] pnp 00:02: [io 0x0080-0x008f]
[ 0.533060] pnp 00:02: [io 0x00c0-0x00df]
[ 0.533064] pnp 00:02: [dma 4]
[ 0.533115] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.533128] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.533148] pnp 00:03: [irq 13]
[ 0.533207] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.533222] pnp 00:04: [io 0x0070-0x0071]
[ 0.533231] pnp 00:04: [irq 8]
[ 0.533282] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.533294] pnp 00:05: [io 0x0061]
[ 0.533349] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.533365] pnp 00:06: [io 0x0060]
[ 0.533368] pnp 00:06: [io 0x0064]
[ 0.533377] pnp 00:06: [irq 1]
[ 0.533431] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.533450] pnp 00:07: [irq 12]
[ 0.533508] pnp 00:07: Plug and Play ACPI device, IDs SYN0705 SYN0700 SYN0002 PNP0f13 (active)
[ 0.533528] pnp 00:08: [io 0x0022-0x0023]
[ 0.533530] pnp 00:08: [io 0x002e-0x002f]
[ 0.533533] pnp 00:08: [io 0x0072-0x0073]
[ 0.533536] pnp 00:08: [io 0x1080]
[ 0.533538] pnp 00:08: [io 0x00b0-0x00b1]
[ 0.533541] pnp 00:08: [io 0x0092]
[ 0.533544] pnp 00:08: [io 0x0220-0x022f]
[ 0.533546] pnp 00:08: [io 0x040b]
[ 0.533549] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.533552] pnp 00:08: [io 0x04d6]
[ 0.533559] pnp 00:08: [io 0x0530-0x0537]
[ 0.533562] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.533565] pnp 00:08: [io 0x0c14]
[ 0.533567] pnp 00:08: [io 0x0c50-0x0c52]
[ 0.533570] pnp 00:08: [io 0x0c6c]
[ 0.533573] pnp 00:08: [io 0x0c6f]
[ 0.533575] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.533578] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.533580] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.533583] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.533586] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.533589] pnp 00:08: [io 0x8000-0x805f]
[ 0.533592] pnp 00:08: [io 0x8100-0x81ff window]
[ 0.533595] pnp 00:08: [io 0x8200-0x82ff window]
[ 0.533597] pnp 00:08: [io 0x0f40-0x0f47]
[ 0.533600] pnp 00:08: [io 0x087f]
[ 0.533603] pnp 00:08: [io 0xfd60-0xfddf]
[ 0.533735] system 00:08: [io 0x1080] has been reserved
[ 0.533739] system 00:08: [io 0x0220-0x022f] has been reserved
[ 0.533743] system 00:08: [io 0x040b] has been reserved
[ 0.533747] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.533750] system 00:08: [io 0x04d6] has been reserved
[ 0.533754] system 00:08: [io 0x0530-0x0537] has been reserved
[ 0.533758] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.533761] system 00:08: [io 0x0c14] has been reserved
[ 0.533765] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.533769] system 00:08: [io 0x0c6c] has been reserved
[ 0.533772] system 00:08: [io 0x0c6f] has been reserved
[ 0.533776] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.533780] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.533784] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.533787] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.533791] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.533795] system 00:08: [io 0x8000-0x805f] has been reserved
[ 0.533799] system 00:08: [io 0x8100-0x81ff window] has been reserved
[ 0.533803] system 00:08: [io 0x8200-0x82ff window] has been reserved
[ 0.533807] system 00:08: [io 0x0f40-0x0f47] has been reserved
[ 0.533811] system 00:08: [io 0x087f] has been reserved
[ 0.533815] system 00:08: [io 0xfd60-0xfddf] has been reserved
[ 0.533819] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.533884] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.533887] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.533890] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.533981] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.533986] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.533990] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.534123] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[ 0.534179] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.550128] pnp: PnP ACPI: found 11 devices
[ 0.550130] ACPI: ACPI bus type pnp unregistered
[ 0.557191] pci 0000:00:14.4: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.557198] pci 0000:00:05.0: BAR 14: assigned [mem 0x84000000-0x841fffff]
[ 0.557202] pci 0000:00:05.0: BAR 15: assigned [mem 0x84200000-0x843fffff 64bit pref]
[ 0.557206] pci 0000:00:06.0: BAR 15: assigned [mem 0x84400000-0x844fffff pref]
[ 0.557212] pci 0000:00:05.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.557217] pci 0000:00:14.4: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.557221] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.557224] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.557229] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf81fffff]
[ 0.557233] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.557238] pci 0000:00:05.0: PCI bridge to [bus 0b-10]
[ 0.557241] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
[ 0.557246] pci 0000:00:05.0: bridge window [mem 0x84000000-0x841fffff]
[ 0.557250] pci 0000:00:05.0: bridge window [mem 0x84200000-0x843fffff 64bit pref]
[ 0.557257] pci 0000:11:00.0: BAR 6: assigned [mem 0x84400000-0x8441ffff pref]
[ 0.557262] pci 0000:00:06.0: PCI bridge to [bus 11-11]
[ 0.557265] pci 0000:00:06.0: bridge window [io 0xa000-0xafff]
[ 0.557269] pci 0000:00:06.0: bridge window [mem 0xf8300000-0xf83fffff]
[ 0.557273] pci 0000:00:06.0: bridge window [mem 0x84400000-0x844fffff pref]
[ 0.557278] pci 0000:00:07.0: PCI bridge to [bus 17-17]
[ 0.557280] pci 0000:00:07.0: bridge window [io disabled]
[ 0.557285] pci 0000:00:07.0: bridge window [mem 0xf8200000-0xf82fffff]
[ 0.557288] pci 0000:00:07.0: bridge window [mem pref disabled]
[ 0.557296] pci 0000:1d:04.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.557301] pci 0000:1d:04.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[ 0.557305] pci 0000:1d:04.0: BAR 13: assigned [io 0x3000-0x30ff]
[ 0.557309] pci 0000:1d:04.0: BAR 14: assigned [io 0x3400-0x34ff]
[ 0.557312] pci 0000:1d:04.0: CardBus bridge to [bus 1e-21]
[ 0.557315] pci 0000:1d:04.0: bridge window [io 0x3000-0x30ff]
[ 0.557325] pci 0000:1d:04.0: bridge window [io 0x3400-0x34ff]
[ 0.557331] pci 0000:1d:04.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.557337] pci 0000:1d:04.0: bridge window [mem 0x88000000-0x8bffffff]
[ 0.557344] pci 0000:00:14.4: PCI bridge to [bus 1d-1e]
[ 0.557348] pci 0000:00:14.4: bridge window [io 0x3000-0x3fff]
[ 0.557354] pci 0000:00:14.4: bridge window [mem 0xf8400000-0xf84fffff]
[ 0.557360] pci 0000:00:14.4: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.557378] pci 0000:00:05.0: enabling device (0000 -> 0003)
[ 0.557382] pci 0000:00:05.0: setting latency timer to 64
[ 0.557388] pci 0000:00:06.0: setting latency timer to 64
[ 0.557394] pci 0000:00:07.0: setting latency timer to 64
[ 0.557425] pci 0000:1d:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.557433] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.557436] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.557439] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.557443] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.557446] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf81fffff]
[ 0.557449] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.557453] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
[ 0.557456] pci_bus 0000:0b: resource 1 [mem 0x84000000-0x841fffff]
[ 0.557459] pci_bus 0000:0b: resource 2 [mem 0x84200000-0x843fffff 64bit pref]
[ 0.557462] pci_bus 0000:11: resource 0 [io 0xa000-0xafff]
[ 0.557465] pci_bus 0000:11: resource 1 [mem 0xf8300000-0xf83fffff]
[ 0.557469] pci_bus 0000:11: resource 2 [mem 0x84400000-0x844fffff pref]
[ 0.557472] pci_bus 0000:17: resource 1 [mem 0xf8200000-0xf82fffff]
[ 0.557475] pci_bus 0000:1d: resource 0 [io 0x3000-0x3fff]
[ 0.557479] pci_bus 0000:1d: resource 1 [mem 0xf8400000-0xf84fffff]
[ 0.557482] pci_bus 0000:1d: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.557485] pci_bus 0000:1d: resource 4 [io 0x0000-0xffff]
[ 0.557488] pci_bus 0000:1d: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.557491] pci_bus 0000:1d: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.557495] pci_bus 0000:1e: resource 0 [io 0x3000-0x30ff]
[ 0.557498] pci_bus 0000:1e: resource 1 [io 0x3400-0x34ff]
[ 0.557501] pci_bus 0000:1e: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.557504] pci_bus 0000:1e: resource 3 [mem 0x88000000-0x8bffffff]
[ 0.557550] NET: Registered protocol family 2
[ 0.557723] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.559121] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.561733] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.562368] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.562372] TCP reno registered
[ 0.562388] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.562421] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.562566] NET: Registered protocol family 1
[ 0.562708] pci 0000:01:05.0: Boot video device
[ 0.562734] PCI: CLS 32 bytes, default 64
[ 0.564484] audit: initializing netlink socket (disabled)
[ 0.564503] type=2000 audit(1306387048.560:1): initialized
[ 0.582012] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.584575] VFS: Disk quotas dquot_6.5.2
[ 0.584655] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.585573] fuse init (API version 7.16)
[ 0.585709] msgmni has been set to 3716
[ 0.586073] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.586111] io scheduler noop registered
[ 0.586114] io scheduler deadline registered
[ 0.586180] io scheduler cfq registered (default)
[ 0.586438] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.586476] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
[ 0.586613] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.586639] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.586751] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.586776] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
[ 0.586891] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 0.586896] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[ 0.586913] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 0.586916] pci 0000:11:00.0: Signaling PME through PCIe PME interrupt
[ 0.586920] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[ 0.586935] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 0.586938] pci 0000:17:00.0: Signaling PME through PCIe PME interrupt
[ 0.586942] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[ 0.586965] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.587006] pciehp 0000:00:05.0:pcie04: HPC vendor_id 1002 device_id 7915 ss_vid 1179 ss_did ff00
[ 0.587028] pciehp 0000:00:05.0:pcie04: service driver pciehp loaded
[ 0.587041] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.589386] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.591887] ACPI: AC Adapter [ACAD] (on-line)
[ 0.591974] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.592009] ACPI: Lid Switch [LID]
[ 0.592067] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.592073] ACPI: Power Button [PWRB]
[ 0.592149] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.592153] ACPI: Power Button [PWRF]
[ 0.592379] ACPI: acpi_idle registered with cpuidle
[ 0.592418] ACPI: processor limited to max C-state 1
[ 0.610309] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.610411] ERST: Table is not found!
[ 0.610532] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.732409] ACPI: Battery Slot [BAT1] (battery present)
[ 0.819980] Freeing initrd memory: 18680k freed
[ 1.340515] Linux agpgart interface v0.103
[ 1.342273] brd: module loaded
[ 1.343137] loop: module loaded
[ 1.343291] i2c-core: driver [adp5520] using legacy suspend method
[ 1.343293] i2c-core: driver [adp5520] using legacy resume method
[ 1.343608] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.343664] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 1.344282] Fixed MDIO Bus: probed
[ 1.344331] PPP generic driver version 2.4.2
[ 1.344400] tun: Universal TUN/TAP device driver, 1.6
[ 1.344402] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.344543] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.344626] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.344649] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 1.344724] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 1.370071] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.370088] ehci_hcd 0000:00:13.5: debug port 1
[ 1.370118] ehci_hcd 0000:00:13.5: irq 19, io mem 0xf8709400
[ 1.390036] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.390199] hub 1-0:1.0: USB hub found
[ 1.390205] hub 1-0:1.0: 10 ports detected
[ 1.390375] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.390444] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.390457] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.390520] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.390581] ohci_hcd 0000:00:13.0: irq 16, io mem 0xf8704000
[ 1.450180] hub 2-0:1.0: USB hub found
[ 1.450193] hub 2-0:1.0: 2 ports detected
[ 1.450362] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.450376] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.450433] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.450494] ohci_hcd 0000:00:13.1: irq 17, io mem 0xf8705000
[ 1.510178] hub 3-0:1.0: USB hub found
[ 1.510189] hub 3-0:1.0: 2 ports detected
[ 1.510353] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.510366] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.510422] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.510482] ohci_hcd 0000:00:13.2: irq 18, io mem 0xf8706000
[ 1.570181] hub 4-0:1.0: USB hub found
[ 1.570191] hub 4-0:1.0: 2 ports detected
[ 1.570359] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.570373] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 1.570429] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.570478] ohci_hcd 0000:00:13.3: irq 17, io mem 0xf8707000
[ 1.630184] hub 5-0:1.0: USB hub found
[ 1.630195] hub 5-0:1.0: 2 ports detected
[ 1.630359] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.630372] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 1.630431] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.630483] ohci_hcd 0000:00:13.4: irq 18, io mem 0xf8708000
[ 1.690174] hub 6-0:1.0: USB hub found
[ 1.690185] hub 6-0:1.0: 2 ports detected
[ 1.690306] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.690461] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.710567] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 1.719639] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.719646] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.719830] mousedev: PS/2 mouse device common for all mice
[ 1.720835] rtc_cmos 00:04: RTC can wake from S4
[ 1.744346] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.761110] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.761142] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.761311] device-mapper: uevent: version 1.0.3
[ 1.761426] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 1.761560] device-mapper: multipath: version 1.2.0 loaded
[ 1.761564] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.761768] cpuidle: using governor ladder
[ 1.761771] cpuidle: using governor menu
[ 1.762134] TCP cubic registered
[ 1.762318] NET: Registered protocol family 10
[ 1.762990] NET: Registered protocol family 17
[ 1.763015] Registering the dns_resolver key type
[ 1.763054] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-58 (2 cpu cores) (version 2.20.00)
[ 1.763119] powernow-k8: 0 : fid 0xb (1900 MHz), vid 0x12
[ 1.763122] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13
[ 1.763124] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14
[ 1.763127] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
[ 1.763315] PM: Hibernation image not present or could not be loaded.
[ 1.763331] registered taskstats version 1
[ 1.763715] Magic number: 11:195:265
[ 1.763838] rtc_cmos 00:04: setting system clock to 2011-05-26 05:17:31 UTC (1306387051)
[ 1.763842] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.763844] EDD information not available.
[ 1.766114] Freeing unused kernel memory: 956k freed
[ 1.766630] Write protecting the kernel read-only data: 10240k
[ 1.767594] Freeing unused kernel memory: 184k freed
[ 1.773961] Freeing unused kernel memory: 1444k freed
[ 1.808573] <30>udev[106]: starting version 167
[ 1.867457] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 1.882115] acpi device:27: registered as cooling_device2
[ 1.882244] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:25/LNXVIDEO:01/input/input4
[ 1.882325] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 1.990101] scsi0 : pata_atiixp
[ 1.995649] scsi1 : pata_atiixp
[ 1.996293] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[ 1.996297] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[ 2.000125] firewire_ohci 0000:1d:04.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.006891] ahci 0000:00:12.0: version 3.0
[ 2.006928] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.006971] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 2.007074] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.007078] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.008139] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.008165] r8169 0000:11:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.008213] r8169 0000:11:00.0: setting latency timer to 64
[ 2.008276] r8169 0000:11:00.0: irq 43 for MSI/MSI-X
[ 2.008684] sdhci: Secure Digital Host Controller Interface driver
[ 2.008688] sdhci: Copyright(c) Pierre Ossman
[ 2.008995] r8169 0000:11:00.0: eth0: RTL8101e at 0xffffc90000330000, 00:1b:38:b6:ce:f5, XID 94200000 IRQ 43
[ 2.009018] scsi2 : ahci
[ 2.009852] scsi3 : ahci
[ 2.010148] scsi4 : ahci
[ 2.013644] scsi5 : ahci
[ 2.013830] ata3: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709100 irq 22
[ 2.013835] ata4: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709180 irq 22
[ 2.013839] ata5: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709200 irq 22
[ 2.013844] ata6: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709280 irq 22
[ 2.060054] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 2.060176] firewire_ohci: Added fw-ohci device 0000:1d:04.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 2.170514] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WT03, max UDMA/33
[ 2.210459] ata1.00: configured for UDMA/33
[ 2.215847] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WT03 PQ: 0 ANSI: 5
[ 2.220705] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.220709] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.220892] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.221004] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.360060] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.370054] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.370092] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.560167] firewire_core: created device fw0: GUID 00023f81c2401ccd, S400
[ 2.660033] usb 4-1: new low speed USB device using ohci_hcd and address 2
[ 2.800039] ata3: softreset failed (device not ready)
[ 2.800043] ata3: applying SB600 PMP SRST workaround and retrying
[ 2.950122] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.0/input/input5
[ 2.950259] generic-usb 0003:046D:C50B.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:13.2-1/input0
[ 2.958761] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.1/input/input6
[ 2.958890] generic-usb 0003:046D:C50B.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.2-1/input1
[ 2.958910] usbcore: registered new interface driver usbhid
[ 2.958913] usbhid: USB HID core driver
[ 3.000056] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.001127] ata3.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC7DP, max UDMA/100
[ 3.001131] ata3.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.001135] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.002348] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.002351] ata3.00: configured for UDMA/100
[ 3.002557] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
[ 3.002758] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 3.002803] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.002820] sd 2:0:0:0: [sda] Write Protect is off
[ 3.002823] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.002849] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.160035] usb 5-1: new full speed USB device using ohci_hcd and address 2
[ 3.430311] sda: sda1 sda2 < sda5 >
[ 3.430815] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.440139] sdhci-pci 0000:1d:04.3: SDHCI controller found [104c:803c] (rev 0)
[ 3.440159] sdhci-pci 0000:1d:04.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 3.440223] mmc0: no vmmc regulator found
[ 3.440283] Registered led device: mmc0::
[ 3.440591] mmc0: SDHCI controller on PCI [0000:1d:04.3] using DMA
[ 3.466523] [drm] Initialized drm 1.1.0 20060810
[ 3.523873] [drm] radeon defaulting to kernel modesetting.
[ 3.523879] [drm] radeon kernel modesetting enabled.
[ 3.524097] radeon 0000:01:05.0: power state changed by ACPI to D0
[ 3.524104] radeon 0000:01:05.0: power state changed by ACPI to D0
[ 3.524114] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.527038] [drm] initializing kernel modesetting (RS690 0x1002:0x791F).
[ 3.527072] [drm] register mmio base: 0xF8100000
[ 3.527074] [drm] register mmio size: 65536
[ 3.527199] ATOM BIOS: ATI
[ 3.527231] radeon 0000:01:05.0: VRAM: 128M 0x0000000078000000 - 0x000000007FFFFFFF (128M used)
[ 3.527235] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 3.527269] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.527272] [drm] Driver supports precise vblank timestamp query.
[ 3.527285] [drm] radeon: irq initialized.
[ 3.527545] [drm] Detected VRAM RAM=128M, BAR=128M
[ 3.527551] [drm] RAM width 128bits DDR
[ 3.527669] [TTM] Zone kernel: Available graphics memory: 962120 kiB.
[ 3.527672] [TTM] Initializing pool allocator.
[ 3.527700] [drm] radeon: 128M of VRAM memory ready
[ 3.527703] [drm] radeon: 512M of GTT memory ready.
[ 3.527731] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 3.531846] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 3.541896] radeon 0000:01:05.0: WB enabled
[ 3.541981] [drm] Loading RS690/RS740 Microcode
[ 3.546335] [drm] radeon: ring at 0x0000000080001000
[ 3.546358] [drm] ring test succeeded in 1 usecs
[ 3.546532] [drm] radeon: ib pool ready.
[ 3.546611] [drm] ib test succeeded in 0 usecs
[ 3.546614] [drm] Enabling audio support
[ 3.546946] [drm] Radeon Display Connectors
[ 3.546949] [drm] Connector 0:
[ 3.546950] [drm] VGA
[ 3.546953] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c
[ 3.546956] [drm] Encoders:
[ 3.546957] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 3.546959] [drm] Connector 1:
[ 3.546961] [drm] LVDS
[ 3.546963] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
[ 3.546965] [drm] Encoders:
[ 3.546967] [drm] LCD1: INTERNAL_LVTM1
[ 3.546969] [drm] Connector 2:
[ 3.546971] [drm] S-video
[ 3.546972] [drm] Encoders:
[ 3.546974] [drm] TV1: INTERNAL_KLDSCP_DAC1
[ 4.197998] [drm] fb mappable at 0xF0040000
[ 4.198002] [drm] vram apper at 0xF0000000
[ 4.198004] [drm] size 8294400
[ 4.198006] [drm] fb depth is 24
[ 4.198008] [drm] pitch is 7680
[ 4.198199] Console: switching to colour frame buffer device 180x56
[ 4.198235] fb0: radeondrmfb frame buffer device
[ 4.198237] drm: registered panic notifier
[ 4.198247] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0
[ 4.970299] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 4.970305] EXT4-fs (sda1): write access will be enabled during recovery
[ 6.093216] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 6.093229] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1703949
[ 6.093276] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1703947
[ 6.093286] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1703946
[ 6.093296] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1703945
[ 6.093305] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1703944
[ 6.093313] EXT4-fs (sda1): 5 orphan inodes deleted
[ 6.093315] EXT4-fs (sda1): recovery complete
[ 6.396890] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 18.521069] <30>udev[369]: starting version 167
[ 18.581789] lp: driver loaded but no devices found
[ 18.674979] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 18.859725] type=1400 audit(1306387068.578:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=524 comm="apparmor_parser"
[ 18.860475] type=1400 audit(1306387068.588:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=524 comm="apparmor_parser"
[ 18.860758] type=1400 audit(1306387068.588:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=524 comm="apparmor_parser"
[ 18.864500] type=1400 audit(1306387068.588:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=551 comm="apparmor_parser"
[ 18.998545] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
[ 19.031548] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 19.031780] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 19.045320] r8169 0000:11:00.0: eth0: link down
[ 19.045330] r8169 0000:11:00.0: eth0: link down
[ 19.045843] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.109763] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.146751] MCE: In-kernel MCE decoding enabled.
[ 19.149133] Bluetooth: Core ver 2.15
[ 19.149324] NET: Registered protocol family 31
[ 19.149327] Bluetooth: HCI device and connection manager initialized
[ 19.149331] Bluetooth: HCI socket layer initialized
[ 19.159578] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 19.178436] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 19.230250] usbcore: registered new interface driver btusb
[ 19.231780] EDAC MC: Ver: 2.1.0 Apr 11 2011
[ 19.245674] EDAC amd64_edac: v3.3.0
[ 19.250402] EDAC amd64: DRAM ECC disabled.
[ 19.250415] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 19.250418] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 19.250419] (Note that use of the override may cause unknown side effects.)
[ 19.365884] Linux video capture interface: v2.00
[ 19.533473] type=1400 audit(1306387069.258:6): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=815 comm="apparmor_parser"
[ 19.533502] type=1400 audit(1306387069.258:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=816 comm="apparmor_parser"
[ 19.536825] type=1400 audit(1306387069.258:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=816 comm="apparmor_parser"
[ 19.537124] type=1400 audit(1306387069.258:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=816 comm="apparmor_parser"
[ 19.553565] type=1400 audit(1306387069.278:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=823 comm="apparmor_parser"
[ 19.554145] type=1400 audit(1306387069.278:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=823 comm="apparmor_parser"
[ 19.594384] tifm_7xx1 0000:1d:04.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 19.705591] yenta_cardbus 0000:1d:04.0: CardBus bridge found [1179:ff00]
[ 19.705617] yenta_cardbus 0000:1d:04.0: Enabling burst memory read transactions
[ 19.705623] yenta_cardbus 0000:1d:04.0: Using CSCINT to route CSC interrupts to PCI
[ 19.705626] yenta_cardbus 0000:1d:04.0: Routing CardBus interrupts to PCI
[ 19.705634] yenta_cardbus 0000:1d:04.0: TI: mfunc 0x10a01b22, devctl 0x64
[ 19.735213] hdpvr 1-2:1.0: firmware version 0x15 dated Jun 17 2010 09:26:53
[ 19.832689] lirc_dev: IR Remote Control driver registered, major 249
[ 19.847649] lirc_zilog: module is from the staging directory, the quality is unknown, you have been warned.
[ 19.863648] lirc_zilog: Zilog/Hauppauge IR driver initializing
[ 19.888259] lirc_zilog: initialization complete
[ 19.951028] yenta_cardbus 0000:1d:04.0: ISA IRQ mask 0x0cf8, PCI irq 20
[ 19.951034] yenta_cardbus 0000:1d:04.0: Socket status: 30000006
[ 19.951039] pci_bus 0000:1d: Raising subordinate bus# of parent bus (#1d) from #1e to #21
[ 19.951055] yenta_cardbus 0000:1d:04.0: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff]
[ 19.951059] yenta_cardbus 0000:1d:04.0: pcmcia: parent PCI bridge window: [mem 0xf8400000-0xf84fffff]
[ 19.951064] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf8400000-0xf84fffff: excluding 0xf8400000-0xf840ffff
[ 19.951080] yenta_cardbus 0000:1d:04.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[ 19.951083] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff
[ 20.012607] lirc_zilog: probing IR Rx on Hauppage HD PVR I2C (i2c-5)
[ 20.012614] lirc_zilog: probe of IR Rx on Hauppage HD PVR I2C (i2c-5) done. Waiting on IR Tx.
[ 20.012658] lirc_zilog: probing IR Tx on Hauppage HD PVR I2C (i2c-5)
[ 20.017259] i2c i2c-5: lirc_dev: driver lirc_zilog registered at minor = 0
[ 20.057106] Bluetooth: L2CAP ver 2.15
[ 20.057113] Bluetooth: L2CAP socket layer initialized
[ 20.073985] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.073990] Bluetooth: BNEP filters: protocol multicast
[ 20.080813] Bluetooth: SCO (Voice Link) ver 0.6
[ 20.080817] Bluetooth: SCO socket layer initialized
[ 20.084447] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[ 20.084511] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 20.086573] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 20.158608] Bluetooth: RFCOMM TTY layer initialized
[ 20.158620] Bluetooth: RFCOMM socket layer initialized
[ 20.158623] Bluetooth: RFCOMM ver 1.11
[ 20.247545] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.356238] hda_codec: ALC268: BIOS auto-probing.
[ 20.368576] lirc_zilog: Zilog/Hauppauge IR blaster firmware version 2.1.0 loaded
[ 20.368584] lirc_zilog: probe of IR Tx on Hauppage HD PVR I2C (i2c-5) done. IR unit ready.
[ 20.368599] hdpvr 1-2:1.0: device now attached to video0
[ 20.371503] hdpvr 1-6:1.0: firmware version 0x15 dated Jun 17 2010 09:26:53
[ 20.379613] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 20.572912] lirc_zilog: probing IR Rx on Hauppage HD PVR I2C (i2c-6)
[ 20.572918] lirc_zilog: ir_probe: probing IR Rx on Hauppage HD PVR I2C (i2c-6) failed with 1
[ 20.572928] Zilog/Hauppauge i2c IR: probe of 6-0071 failed with error 1
[ 20.573033] lirc_zilog: probing IR Tx on Hauppage HD PVR I2C (i2c-6)
[ 20.573037] lirc_zilog: ir_probe: probing IR Tx on Hauppage HD PVR I2C (i2c-6) failed with 1
[ 20.573041] Zilog/Hauppauge i2c IR: probe of 6-0070 failed with error 1
[ 20.573045] hdpvr 1-6:1.0: device now attached to video1
[ 20.573103] usbcore: registered new interface driver hdpvr
[ 20.641272] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000/0x0
[ 20.641281] synaptics: Toshiba Satellite P205D detected, limiting rate to 40pps.
[ 20.737034] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 20.766798] r8169 0000:11:00.0: eth0: link up
[ 20.767180] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.479762] ppdev: user-space parallel port driver
[ 22.364343] Intel AES-NI instructions are not detected.
[ 22.391710] padlock_aes: VIA PadLock not detected.
[ 22.430855] padlock_sha: VIA PadLock Hash Engine not detected.
[ 26.404580] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 27.206988] Adding 1963004k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:1963004k
[ 31.620022] eth0: no IPv6 routers present