rendered paste body[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35.13 (eballetbo@jupiter) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #1 Mon May 2 10:09:20 CEST 2011
[ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: IGEP v2 board
[ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
[ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c0575580, node_mem_map c05bb000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 130048 pages, LIFO batch:31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: vram=12M omapfb.mode=dvi:1024x768MR-16@60 root=/dev/mmcblk0p2 console=ttyS2,115200n8 console=tty0 fixrtc
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 256MB 256MB = 512MB total
[ 0.000000] Memory: 486028k/486028k available, 38260k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0034000 ( 176 kB)
[ 0.000000] .text : 0xc0034000 - 0xc0519000 (5012 kB)
[ 0.000000] .data : 0xc053c000 - 0xc0575ba0 ( 231 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:402
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/720 MHz
[ 0.000000] Reprogramming SDRC clock to 332000000 Hz
[ 0.000000] GPMC revision 5.0
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000000] Calibrating delay loop... 719.47 BogoMIPS (lpj=2809856)
[ 0.000000] pid_max: default: 32768 minimum: 301
[ 0.000000] Mount-cache hash table entries: 512
[ 0.000000] CPU: Testing write buffer coherency: ok
[ 0.000000] regulator: core version 0.5
[ 0.000000] regulator: dummy:
[ 0.000000] NET: Registered protocol family 16
[ 0.000000] mux: Setting signal etk_d14.gpio28 0x0104 -> 0x0104
[ 0.000000] IGEP2: Hardware Revision B/C (B compatible)
[ 0.000000] mux: Setting signal i2c3_scl.i2c3_scl 0x0118 -> 0x0100
[ 0.000000] mux: Setting signal i2c3_sda.i2c3_sda 0x0118 -> 0x0100
[ 0.000000] mux: Setting signal etk_clk.hsusb1_stp 0x0013 -> 0x0003
[ 0.000000] mux: Setting signal etk_ctl.hsusb1_clk 0x0013 -> 0x0003
[ 0.000000] mux: Setting signal etk_d8.hsusb1_dir 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal etk_d9.hsusb1_nxt 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal etk_d0.hsusb1_data0 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal etk_d1.hsusb1_data1 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal etk_d2.hsusb1_data2 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal etk_d7.hsusb1_data3 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal etk_d4.hsusb1_data4 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal etk_d5.hsusb1_data5 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal etk_d6.hsusb1_data6 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal etk_d3.hsusb1_data7 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal cam_strobe.cam_strobe 0x0000 -> 0x0004
[ 0.000000] mux: Setting signal cam_wen.gpio167 0x0104 -> 0x0004
[ 0.000000] mux: Setting signal i2c2_scl.i2c2_scl 0x011c -> 0x0100
[ 0.000000] mux: Setting signal i2c2_sda.i2c2_sda 0x011c -> 0x0100
[ 0.000000] mux: Setting signal uart1_rts.uart1_rts 0x0000 -> 0x0007
[ 0.000000] mux: Setting signal uart1_cts.uart1_cts 0x0110 -> 0x0007
[ 0.000000] mux: Setting signal mcbsp4_fsx.gpio155 0x0004 -> 0x0104
[ 0.000000] mux: Setting signal mcspi1_cs1.mcspi1_cs1 0x0104 -> 0x0000
[ 0.000000] mux: Setting signal mcbsp1_fsr.gpio157 0x001c -> 0x011c
[ 0.000213] OMAP DMA hardware revision 4.0
[ 0.015747] bio: create slab <bio-0> at 0
[ 0.016784] regulator: vwlan: 3300 mV normal
[ 0.018249] SCSI subsystem initialized
[ 0.021850] usbcore: registered new interface driver usbfs
[ 0.022064] usbcore: registered new interface driver hub
[ 0.022308] usbcore: registered new device driver usb
[ 0.022827] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
[ 0.025756] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 0.025787] twl4030: power (irq 373) chaining IRQs 376..383
[ 0.026275] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 0.026855] mux: Setting signal sdmmc1_clk.sdmmc1_clk 0x0018 -> 0x0118
[ 0.026977] mux: Setting signal sdmmc1_cmd.sdmmc1_cmd 0x0118 -> 0x0118
[ 0.027069] mux: Setting signal sdmmc1_dat0.sdmmc1_dat0 0x0118 -> 0x0118
[ 0.027130] mux: Setting signal sdmmc1_dat1.sdmmc1_dat1 0x0118 -> 0x0118
[ 0.027221] mux: Setting signal sdmmc1_dat2.sdmmc1_dat2 0x0118 -> 0x0118
[ 0.027282] mux: Setting signal sdmmc1_dat3.sdmmc1_dat3 0x0118 -> 0x0118
[ 0.027801] mux: Setting signal sdmmc2_clk.sdmmc2_clk 0x0118 -> 0x0118
[ 0.027893] mux: Setting signal sdmmc2_cmd.sdmmc2_cmd 0x0118 -> 0x0118
[ 0.027954] mux: Setting signal sdmmc2_dat0.sdmmc2_dat0 0x0118 -> 0x0118
[ 0.028045] mux: Setting signal sdmmc2_dat1.sdmmc2_dat1 0x0118 -> 0x0118
[ 0.028106] mux: Setting signal sdmmc2_dat2.sdmmc2_dat2 0x0118 -> 0x0118
[ 0.028198] mux: Setting signal sdmmc2_dat3.sdmmc2_dat3 0x0118 -> 0x0118
[ 0.029968] regulator: VUSB1V5: 1500 mV normal standby
[ 0.030548] regulator: VUSB1V8: 1800 mV normal standby
[ 0.031066] regulator: VUSB3V1: 3100 mV normal standby
[ 0.032440] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 0.034912] regulator: VIO: 1800 mV normal standby
[ 0.035766] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
[ 0.036315] regulator: VDAC: 1800 mV normal standby
[ 0.036895] regulator: VDVI: 1800 mV normal standby
[ 0.037139] i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz
[ 0.037628] i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz
[ 0.039611] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.040374] Switching to clocksource 32k_counter
[ 0.057556] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
[ 0.059875] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 0.059906] musb_hdrc: MHDRC RTL version 1.400
[ 0.059936] musb_hdrc: setup fifo_mode 4
[ 0.059936] musb_hdrc: 28/31 max ep, 16384/16384 memory
[ 0.060089] musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[ 0.060485] NET: Registered protocol family 2
[ 0.060638] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.061035] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.061431] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.061676] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.061706] TCP reno registered
[ 0.061737] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.061767] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.061981] NET: Registered protocol family 1
[ 0.062316] RPC: Registered udp transport module.
[ 0.062347] RPC: Registered tcp transport module.
[ 0.062347] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.062591] Trying to unpack rootfs image as initramfs...
[ 0.819366] Freeing initrd memory: 9464K
[ 0.820678] omap_dsp_init: 600000 bytes @ 9fa00000
[ 0.822448] VFS: Disk quotas dquot_6.5.2
[ 0.822509] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.823089] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.823547] JFFS2 version 2.2. (NAND) 2001-2006 Red Hat, Inc.
[ 0.824310] Btrfs loaded
[ 0.824371] msgmni has been set to 967
[ 0.827636] alg: No test for stdrng (krng)
[ 0.827728] io scheduler noop registered
[ 0.827758] io scheduler deadline registered (default)
[ 0.884460] OMAP DSS rev 2.0
[ 0.884552] OMAP DISPC rev 3.0
[ 0.884582] OMAP DSI rev 1.0
[ 1.057556] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.079620] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
[ 1.100708] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
[ 1.121520] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
[ 1.678710] console [ttyS2] enabled
[ 1.683441] brd: module loaded
[ 1.691223] loop: module loaded
[ 1.694488] at24 2-0050: 128 byte 24c01 EEPROM (writable)
[ 1.703735] OneNAND driver initializing
[ 1.707855] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x20000000, virtual base e0900000
[ 1.717620] OneNAND Manufacturer: Numonyx (0x20)
[ 1.717651] Muxed OneNAND(DDP) 512MB 1.8V 16-bit (0x58)
[ 1.722930] OneNAND version = 0x0031
[ 1.726531] Chip support all block unlock
[ 1.726531] Chip has 2 plane
[ 1.729187] Scanning device for bad blocks
[ 1.886901] Bad eraseblock 3318 at 0x19ec0000
[ 1.926910] Creating 5 MTD partitions on "omap2-onenand":
[ 1.932373] 0x000000000000-0x000000080000 : "X-Loader"
[ 1.939056] 0x000000080000-0x000000200000 : "U-Boot"
[ 1.945343] 0x000000200000-0x000000280000 : "Environment"
[ 1.952117] 0x000000280000-0x000000580000 : "Kernel"
[ 1.958465] 0x000000580000-0x000020000000 : "File System"
[ 1.966613] vcan: Virtual CAN interface driver
[ 1.971221] CAN device driver interface
[ 1.975189] smsc911x: Driver version 2008-10-21.
[ 1.984802] smsc911x-mdio: probed
[ 1.988372] eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
[ 1.996337] net eth0: MAC Address: 32:77:2b:72:6b:97
[ 2.001647] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.008300] ehci-omap.0 supply hsusb0 not found, using dummy regulator
[ 2.015228] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 2.020996] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 2.028625] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 2.048339] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 2.054229] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.061096] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.068420] usb usb1: Product: OMAP-EHCI Host Controller
[ 2.073791] usb usb1: Manufacturer: Linux 2.6.35.13 ehci_hcd
[ 2.079467] usb usb1: SerialNumber: ehci-omap.0
[ 2.084930] hub 1-0:1.0: USB hub found
[ 2.088806] hub 1-0:1.0: 3 ports detected
[ 2.118896] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.125396] g_ether gadget: using random self ethernet address
[ 2.131317] g_ether gadget: using random host ethernet address
[ 2.137786] usb0: MAC ce:b4:22:a1:0e:e1
[ 2.141662] usb0: HOST MAC e2:3c:ca:87:8b:54
[ 2.146087] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 2.152801] g_ether gadget: g_ether ready
[ 2.156860] musb_hdrc musb_hdrc: MUSB HDRC host driver
[ 2.162078] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 2
[ 2.169464] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.176330] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.183624] usb usb2: Product: MUSB HDRC host driver
[ 2.188629] usb usb2: Manufacturer: Linux 2.6.35.13 musb-hcd
[ 2.194366] usb usb2: SerialNumber: musb_hdrc
[ 2.199615] hub 2-0:1.0: USB hub found
[ 2.203430] hub 2-0:1.0: 1 port detected
[ 2.208160] mice: PS/2 mouse device common for all mice
[ 2.213836] spi1.1 supply vcc not found, using dummy regulator
[ 2.220031] ads7846 spi1.1: touchscreen, irq 315
[ 2.224975] ads7846 spi1.1: no device detected, test read result was 0x00000000
[ 2.233520] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
[ 2.244323] i2c /dev entries driver
[ 2.249755] mmci-omap-hs.0 supply vmmc_aux not found, using dummy regulator
[ 2.259735] Registered led device: gpio-led:red:d0
[ 2.259979] Registered led device: gpio-led:green:d0
[ 2.260192] Registered led device: gpio-led:red:d1
[ 2.260711] Registered led device: gpio-led:green:d1
[ 2.261810] usbcore: registered new interface driver hiddev
[ 2.267730] usbcore: registered new interface driver usbhid
[ 2.273345] usbhid: USB HID core driver
[ 2.353698] No device for DAI omap-mcbsp-dai-0
[ 2.358245] No device for DAI omap-mcbsp-dai-1
[ 2.362823] No device for DAI omap-mcbsp-dai-2
[ 2.367309] No device for DAI omap-mcbsp-dai-3
[ 2.371826] No device for DAI omap-mcbsp-dai-4
[ 2.376281] IGEP v2 SoC init
[ 2.380584] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[ 2.392272] ALSA device list:
[ 2.395294] #0: igep2 (twl4030)
[ 2.398895] TCP cubic registered
[ 2.402404] NET: Registered protocol family 10
[ 2.407348] lo: Disabled Privacy Extensions
[ 2.412048] NET: Registered protocol family 17
[ 2.416625] can: controller area network core (rev 20090105 abi 8)
[ 2.423980] usb 1-1: new high speed USB device using ehci-omap and address 2
[ 2.433227] NET: Registered protocol family 29
[ 2.437744] ThumbEE CPU extension supported.
[ 2.443481] Power Management for TI OMAP3.
[ 2.449005] Disabling unused clock "sr2_fck"
[ 2.449035] Disabling unused clock "sr1_fck"
[ 2.449035] Disabling unused clock "mcbsp4_fck"
[ 2.449066] Disabling unused clock "mcbsp3_fck"
[ 2.449066] Disabling unused clock "mcbsp2_fck"
[ 2.449096] Disabling unused clock "mcbsp4_ick"
[ 2.449096] Disabling unused clock "mcbsp3_ick"
[ 2.449096] Disabling unused clock "mcbsp2_ick"
[ 2.449127] Disabling unused clock "gpt2_ick"
[ 2.449127] Disabling unused clock "gpt3_ick"
[ 2.449157] Disabling unused clock "gpt4_ick"
[ 2.449157] Disabling unused clock "gpt5_ick"
[ 2.449157] Disabling unused clock "gpt6_ick"
[ 2.449188] Disabling unused clock "gpt7_ick"
[ 2.449188] Disabling unused clock "gpt8_ick"
[ 2.449218] Disabling unused clock "gpt9_ick"
[ 2.449218] Disabling unused clock "wdt3_ick"
[ 2.449218] Disabling unused clock "wdt3_fck"
[ 2.449249] Disabling unused clock "gpio2_dbck"
[ 2.449249] Disabling unused clock "gpio3_dbck"
[ 2.449279] Disabling unused clock "gpio4_dbck"
[ 2.449279] Disabling unused clock "gpio5_dbck"
[ 2.449310] Disabling unused clock "gpio6_dbck"
[ 2.449310] Disabling unused clock "gpt9_fck"
[ 2.449310] Disabling unused clock "gpt8_fck"
[ 2.449340] Disabling unused clock "gpt7_fck"
[ 2.449340] Disabling unused clock "gpt6_fck"
[ 2.449371] Disabling unused clock "gpt5_fck"
[ 2.449371] Disabling unused clock "gpt4_fck"
[ 2.449371] Disabling unused clock "gpt3_fck"
[ 2.449401] Disabling unused clock "gpt2_fck"
[ 2.449401] Disabling unused clock "gpt12_ick"
[ 2.449432] Disabling unused clock "wdt1_ick"
[ 2.449432] Disabling unused clock "wdt2_ick"
[ 2.449432] Disabling unused clock "wdt2_fck"
[ 2.449462] Disabling unused clock "gpio1_dbck"
[ 2.449462] Disabling unused clock "cam_ick"
[ 2.449493] Disabling unused clock "cam_mclk"
[ 2.449554] Disabling unused clock "des1_ick"
[ 2.449554] Disabling unused clock "sha11_ick"
[ 2.449554] Disabling unused clock "rng_ick"
[ 2.449584] Disabling unused clock "aes1_ick"
[ 2.449584] Disabling unused clock "ssi_ick"
[ 2.449584] Disabling unused clock "mailboxes_ick"
[ 2.449615] Disabling unused clock "mcbsp1_ick"
[ 2.449615] Disabling unused clock "mcbsp5_ick"
[ 2.449645] Disabling unused clock "gpt10_ick"
[ 2.449645] Disabling unused clock "gpt11_ick"
[ 2.449676] Disabling unused clock "hdq_ick"
[ 2.449676] Disabling unused clock "mspro_ick"
[ 2.449707] Disabling unused clock "des2_ick"
[ 2.449707] Disabling unused clock "sha12_ick"
[ 2.449707] Disabling unused clock "aes2_ick"
[ 2.449737] Disabling unused clock "icr_ick"
[ 2.449737] Disabling unused clock "pka_ick"
[ 2.449768] Disabling unused clock "ssi_ssr_fck"
[ 2.449768] Disabling unused clock "hdq_fck"
[ 2.449798] Disabling unused clock "mcbsp1_fck"
[ 2.449798] Disabling unused clock "mcbsp5_fck"
[ 2.449829] Disabling unused clock "mspro_fck"
[ 2.449829] Disabling unused clock "gpt11_fck"
[ 2.449829] Disabling unused clock "gpt10_fck"
[ 2.449859] Disabling unused clock "sad2d_ick"
[ 2.449890] Disabling unused clock "dpll4_m6x2_ck"
[ 2.449890] Disabling unused clock "dpll3_m3x2_ck"
[ 2.449920] Disabling unused clock "sys_clkout1"
[ 2.449920] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 2.462127] omapfb omapfb: no driver for display
[ 2.466857] omapfb omapfb: failed to setup omapfb
[ 2.472045] regulator_init_complete: incomplete constraints, leaving VDVI on
[ 2.479309] regulator_init_complete: incomplete constraints, leaving VDAC on
[ 2.486694] Freeing init memory: 176K
[ 2.579803] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 2.595916] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
[ 2.602691] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.612304] mmc0: new high speed SDHC card at address 1234
[ 2.626617] mmcblk0: mmc0:1234 SA04G 3.67 GiB
[ 2.634765] mmcblk0: p1 p2
[ 2.649505] hub 1-1:1.0: USB hub found
[ 2.653656] hub 1-1:1.0: 2 ports detected
[ 2.736236] mmc1: new SDIO card at address 0001
[ 2.947357] usb 1-1.1: new low speed USB device using ehci-omap and address 3
[ 3.199066] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c30e
[ 3.206146] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.213562] usb 1-1.1: Product: HID compliant keyboard
[ 3.218719] usb 1-1.1: Manufacturer: Logitech
[ 3.378479] input: Logitech HID compliant keyboard as /devices/platform/ehci-omap.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1
[ 3.476135] generic-usb 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-ehci-omap.0-1.1/input0
[ 3.556213] input: Logitech HID compliant keyboard as /devices/platform/ehci-omap.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input2
[ 3.568237] generic-usb 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-ehci-omap.0-1.1/input1
[ 3.674255] usb 1-1.2: new low speed USB device using ehci-omap and address 4
[ 3.804077] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c061
[ 3.811096] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.818572] usb 1-1.2: Product: USB Laser Mouse
[ 3.823150] usb 1-1.2: Manufacturer: Logitech
[ 3.856964] input: Logitech USB Laser Mouse as /devices/platform/ehci-omap.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input3
[ 3.885467] generic-usb 0003:046D:C061.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-ehci-omap.0-1.2/input0
[ 4.197326] net eth0: SMSC911x/921x identified at 0xe08d2000, IRQ: 336
[ 4.210021] ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 4.358398] EXT3-fs: barriers not enabled
[ 4.365753] kjournald starting. Commit interval 5 seconds
[ 4.371368] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[ 4.798645] eth0: IPv6 duplicate address fe80::3077:2bff:fe72:6b97 detected!
[ 17.382507] EXT3-fs (mmcblk0p2): using internal journal
[ 17.523406] udev[3158]: starting version 163
[ 18.358276] input: TWL4030 Keypad as /devices/platform/i2c_omap.1/i2c-1/1-004a/twl4030_keypad/input/input4
[ 18.735321] lib80211: common routines for IEEE802.11 drivers
[ 18.735321] lib80211_crypt: registered algorithm 'NULL'
[ 18.852600] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 18.895355] Linux video capture interface: v2.00
[ 18.940521] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 19.217315] tvp5150 2-005c: chip found @ 0xb8 (OMAP I2C adapter)
[ 20.139404] mcp251x spi1.0: MCP251x didn't enter in conf mode after reset
[ 20.177886] mcp251x spi1.0: Probe failed
[ 20.177917] mcp251x spi1.0: probe failed
[ 20.255493] cfg80211: Calling CRDA to update world regulatory domain
[ 20.513641] cfg80211: World regulatory domain updated:
[ 20.513671] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.513702] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.513702] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.513732] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.513732] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.513763] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.729797] libertas_sdio: Libertas SDIO driver
[ 20.729827] libertas_sdio: Copyright Pierre Ossman
[ 21.745483] Adding 524284k swap on /SWAP.swap. Priority:-1 extents:436 across:1778196k SS
[ 22.833343] libertas: 00:13:e0:f2:0f:e4, fw 9.70.7p0, cap 0x00000303
[ 22.833374] libertas: unidentified region code; using the default (USA)
[ 22.841064] libertas: wlan0: Marvell WLAN 802.11 adapter