rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-1010-linaro-omap (buildd@crabapple) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #17-Ubuntu Wed Dec 15 14:27:49 UTC 2010 (Ubuntu 2.6.35-1010.17-linaro-omap 2.6.35.9)
[ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: IGEP v2 board
[ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
[ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
[ 0.000000] On node 0 totalpages: 128000
[ 0.000000] free_area_init_node: node 0, pgdat c0771d80, node_mem_map c082d000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 126976
[ 0.000000] Kernel command line: vram=12M omapfb.mode=dvi:1024x768MR-16@60 root=/dev/mmcblk0p2 console=ttyS2,115200n8 console=tty0 fixrtc
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] allocated 2621440 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 500MB = 500MB total
[ 0.000000] Memory: 487292k/487292k available, 36996k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0043000 ( 236 kB)
[ 0.000000] .text : 0xc0043000 - 0xc06b3000 (6592 kB)
[ 0.000000] .data : 0xc071e000 - 0xc0776080 ( 353 kB)
[ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:402
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/720 MHz
[ 0.000000] Reprogramming SDRC clock to 332000000 Hz
[ 0.000000] GPMC revision 5.0
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000000] Calibrating delay loop... 719.47 BogoMIPS (lpj=2809856)
[ 0.000000] pid_max: default: 32768 minimum: 301
[ 0.000000] Security Framework initialized
[ 0.000000] AppArmor: AppArmor initialized
[ 0.000000] Yama: becoming mindful.
[ 0.000000] Mount-cache hash table entries: 512
[ 0.000000] Initializing cgroup subsys ns
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Initializing cgroup subsys memory
[ 0.000000] Initializing cgroup subsys devices
[ 0.000000] Initializing cgroup subsys freezer
[ 0.000000] CPU: Testing write buffer coherency: ok
[ 0.000000] devtmpfs: initialized
[ 0.000000] regulator: core version 0.5
[ 0.000000] NET: Registered protocol family 16
[ 0.000000] mux: Setting signal etk_d14.gpio28 0x0104 -> 0x0104
[ 0.000000] IGEP2: Hardware Revision B/C (B compatible)
[ 0.000000] mux: Setting signal i2c3_scl.i2c3_scl 0x0118 -> 0x0100
[ 0.000000] mux: Setting signal i2c3_sda.i2c3_sda 0x0118 -> 0x0100
[ 0.000000] mux: Setting signal etk_clk.hsusb1_stp 0x0013 -> 0x0003
[ 0.000000] mux: Setting signal etk_ctl.hsusb1_clk 0x0013 -> 0x0003
[ 0.000000] mux: Setting signal etk_d8.hsusb1_dir 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal etk_d9.hsusb1_nxt 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal etk_d0.hsusb1_data0 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal etk_d1.hsusb1_data1 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal etk_d2.hsusb1_data2 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal etk_d7.hsusb1_data3 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal etk_d4.hsusb1_data4 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal etk_d5.hsusb1_data5 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal etk_d6.hsusb1_data6 0x0113 -> 0x010b
[ 0.000000] mux: Setting signal etk_d3.hsusb1_data7 0x0113 -> 0x010b
[ 0.000000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.000122] OMAP DMA hardware revision 4.0
[ 0.004760] bio: create slab <bio-0> at 0
[ 0.006378] SCSI subsystem initialized
[ 0.006652] libata version 3.00 loaded.
[ 0.006958] usbcore: registered new interface driver usbfs
[ 0.007049] usbcore: registered new interface driver hub
[ 0.007232] usbcore: registered new device driver usb
[ 0.007568] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
[ 0.009979] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 0.010040] twl4030: power (irq 373) chaining IRQs 376..383
[ 0.010467] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 0.010925] mux: Setting signal sdmmc1_clk.sdmmc1_clk 0x0018 -> 0x0118
[ 0.011047] mux: Setting signal sdmmc1_cmd.sdmmc1_cmd 0x0118 -> 0x0118
[ 0.011138] mux: Setting signal sdmmc1_dat0.sdmmc1_dat0 0x0118 -> 0x0118
[ 0.011230] mux: Setting signal sdmmc1_dat1.sdmmc1_dat1 0x0118 -> 0x0118
[ 0.011322] mux: Setting signal sdmmc1_dat2.sdmmc1_dat2 0x0118 -> 0x0118
[ 0.011383] mux: Setting signal sdmmc1_dat3.sdmmc1_dat3 0x0118 -> 0x0118
[ 0.011657] mux: Setting signal sdmmc2_clk.sdmmc2_clk 0x0118 -> 0x0118
[ 0.011749] mux: Setting signal sdmmc2_cmd.sdmmc2_cmd 0x0118 -> 0x0118
[ 0.011810] mux: Setting signal sdmmc2_dat0.sdmmc2_dat0 0x0118 -> 0x0118
[ 0.011901] mux: Setting signal sdmmc2_dat1.sdmmc2_dat1 0x0118 -> 0x0118
[ 0.011993] mux: Setting signal sdmmc2_dat2.sdmmc2_dat2 0x0118 -> 0x0118
[ 0.012054] mux: Setting signal sdmmc2_dat3.sdmmc2_dat3 0x0118 -> 0x0118
[ 0.013031] regulator: VUSB1V5: 1500 mV normal standby
[ 0.013366] regulator: VUSB1V8: 1800 mV normal standby
[ 0.013671] regulator: VUSB3V1: 3100 mV normal standby
[ 0.014373] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
[ 0.014709] regulator: VDAC: 1800 mV normal standby
[ 0.015075] regulator: VDVI: 1800 mV normal standby
[ 0.015289] i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz
[ 0.016143] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.016632] NetLabel: Initializing
[ 0.016662] NetLabel: domain hash size = 128
[ 0.016693] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.016754] NetLabel: unlabeled traffic allowed by default
[ 0.016815] Switching to clocksource 32k_counter
[ 0.024688] AppArmor: AppArmor Filesystem Enabled
[ 0.034637] NET: Registered protocol family 2
[ 0.034881] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.035644] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.035949] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.036163] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.036193] TCP reno registered
[ 0.036224] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.036254] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.036468] NET: Registered protocol family 1
[ 0.036529] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.037384] PMU: registered new PMU device of type 0
[ 0.038146] audit: initializing netlink socket (disabled)
[ 0.038208] type=2000 audit(0.218:1): initialized
[ 0.167541] Trying to unpack rootfs image as initramfs...
[ 0.316925] VFS: Disk quotas dquot_6.5.2
[ 0.317291] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.320343] fuse init (API version 7.14)
[ 0.320953] msgmni has been set to 951
[ 0.331390] alg: No test for stdrng (krng)
[ 0.331878] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.331939] io scheduler noop registered
[ 0.331939] io scheduler deadline registered
[ 0.332061] io scheduler cfq registered (default)
[ 0.392486] OMAP DSS rev 2.0
[ 0.392608] OMAP DISPC rev 3.0
[ 0.392669] OMAP VENC rev 2
[ 0.721069] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.742370] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
[ 0.789123] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
[ 0.826934] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
[ 1.441070] console [ttyS2] enabled
[ 1.705535] Freeing initrd memory: 9280K
[ 1.716308] brd: module loaded
[ 1.722717] loop: module loaded
[ 1.727447] omap2-nand driver initializing
[ 1.733459] PPP generic driver version 2.4.2
[ 1.738098] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 1.747863] CSLIP: code copyright 1989 Regents of the University of California.
[ 1.755249] SLIP linefill/keepalive option.
[ 1.759552] smsc911x: Driver version 2008-10-21.
[ 1.769775] smsc911x-mdio: probed
[ 1.773254] eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=0:01, irq=-1)
[ 1.781311] net eth0: MAC Address: 3a:07:32:6b:06:e3
[ 1.786529] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.793395] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 1.799194] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 1.806854] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 1.821685] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 1.828247] hub 1-0:1.0: USB hub found
[ 1.832092] hub 1-0:1.0: 3 ports detected
[ 1.861236] mice: PS/2 mouse device common for all mice
[ 1.866943] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 1.873260] twl_rtc twl_rtc: Power up reset detected.
[ 1.879241] twl_rtc twl_rtc: Enabling TWL-RTC.
[ 1.884796] device-mapper: uevent: version 1.0.3
[ 1.890136] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.899017] device-mapper: multipath: version 1.1.1 loaded
[ 1.904602] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.911926] cpuidle: using governor ladder
[ 1.916107] cpuidle: using governor menu
[ 1.920135] sdhci: Secure Digital Host Controller Interface driver
[ 1.926391] sdhci: Copyright(c) Pierre Ossman
[ 2.116607] No device for DAI omap-mcbsp-dai-0
[ 2.121154] No device for DAI omap-mcbsp-dai-1
[ 2.125610] No device for DAI omap-mcbsp-dai-2
[ 2.130126] No device for DAI omap-mcbsp-dai-3
[ 2.134613] No device for DAI omap-mcbsp-dai-4
[ 2.139099] Not OMAP3 EVM!
[ 2.141815] IGEP v2 SoC init
[ 2.146026] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[ 2.154388] ALSA device list:
[ 2.157409] #0: igep2 (twl4030)
[ 2.160858] usb 1-1: new high speed USB device using ehci-omap and address 2
[ 2.169036] TCP cubic registered
[ 2.173767] NET: Registered protocol family 10
[ 2.179473] lo: Disabled Privacy Extensions
[ 2.185058] NET: Registered protocol family 17
[ 2.189758] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 2.201965] Power Management for TI OMAP3.
[ 2.214721] Disabling unused clock "sr2_fck"
[ 2.214752] Disabling unused clock "sr1_fck"
[ 2.214752] Disabling unused clock "mcbsp4_fck"
[ 2.214782] Disabling unused clock "mcbsp3_fck"
[ 2.214782] Disabling unused clock "mcbsp2_fck"
[ 2.214813] Disabling unused clock "mcbsp4_ick"
[ 2.214813] Disabling unused clock "mcbsp3_ick"
[ 2.214843] Disabling unused clock "mcbsp2_ick"
[ 2.214843] Disabling unused clock "gpt2_ick"
[ 2.214843] Disabling unused clock "gpt3_ick"
[ 2.214874] Disabling unused clock "gpt4_ick"
[ 2.214874] Disabling unused clock "gpt5_ick"
[ 2.214904] Disabling unused clock "gpt6_ick"
[ 2.214904] Disabling unused clock "gpt7_ick"
[ 2.214935] Disabling unused clock "gpt8_ick"
[ 2.214935] Disabling unused clock "gpt9_ick"
[ 2.214965] Disabling unused clock "wdt3_ick"
[ 2.214965] Disabling unused clock "wdt3_fck"
[ 2.214996] Disabling unused clock "gpio2_dbck"
[ 2.214996] Disabling unused clock "gpio3_dbck"
[ 2.214996] Disabling unused clock "gpio4_dbck"
[ 2.215026] Disabling unused clock "gpio5_dbck"
[ 2.215026] Disabling unused clock "gpio6_dbck"
[ 2.215057] Disabling unused clock "gpt9_fck"
[ 2.215057] Disabling unused clock "gpt8_fck"
[ 2.215087] Disabling unused clock "gpt7_fck"
[ 2.215087] Disabling unused clock "gpt6_fck"
[ 2.215118] Disabling unused clock "gpt5_fck"
[ 2.215118] Disabling unused clock "gpt4_fck"
[ 2.215118] Disabling unused clock "gpt3_fck"
[ 2.215148] Disabling unused clock "gpt2_fck"
[ 2.215148] Disabling unused clock "gpt12_ick"
[ 2.215179] Disabling unused clock "wdt1_ick"
[ 2.215179] Disabling unused clock "wdt2_ick"
[ 2.215209] Disabling unused clock "wdt2_fck"
[ 2.215209] Disabling unused clock "gpio1_dbck"
[ 2.215240] Disabling unused clock "cam_ick"
[ 2.215270] Disabling unused clock "cam_mclk"
[ 2.215301] Disabling unused clock "des1_ick"
[ 2.215332] Disabling unused clock "sha11_ick"
[ 2.215332] Disabling unused clock "rng_ick"
[ 2.215332] Disabling unused clock "aes1_ick"
[ 2.215362] Disabling unused clock "ssi_ick"
[ 2.215362] Disabling unused clock "mailboxes_ick"
[ 2.215393] Disabling unused clock "mcbsp1_ick"
[ 2.215393] Disabling unused clock "mcbsp5_ick"
[ 2.215423] Disabling unused clock "gpt10_ick"
[ 2.215423] Disabling unused clock "gpt11_ick"
[ 2.215454] Disabling unused clock "i2c2_ick"
[ 2.215454] Disabling unused clock "mcspi1_ick"
[ 2.215484] Disabling unused clock "mcspi2_ick"
[ 2.215484] Disabling unused clock "mcspi3_ick"
[ 2.215484] Disabling unused clock "mcspi4_ick"
[ 2.215515] Disabling unused clock "hdq_ick"
[ 2.215515] Disabling unused clock "mspro_ick"
[ 2.215545] Disabling unused clock "des2_ick"
[ 2.215545] Disabling unused clock "sha12_ick"
[ 2.215576] Disabling unused clock "aes2_ick"
[ 2.215576] Disabling unused clock "icr_ick"
[ 2.215606] Disabling unused clock "pka_ick"
[ 2.215606] Disabling unused clock "hsotgusb_ick"
[ 2.215637] Disabling unused clock "ssi_ssr_fck"
[ 2.215637] Disabling unused clock "hdq_fck"
[ 2.215667] Disabling unused clock "mcspi1_fck"
[ 2.215667] Disabling unused clock "mcspi2_fck"
[ 2.215698] Disabling unused clock "mcspi3_fck"
[ 2.215698] Disabling unused clock "mcspi4_fck"
[ 2.215698] Disabling unused clock "mcbsp1_fck"
[ 2.215728] Disabling unused clock "mcbsp5_fck"
[ 2.215728] Disabling unused clock "i2c2_fck"
[ 2.215759] Disabling unused clock "mspro_fck"
[ 2.215759] Disabling unused clock "gpt11_fck"
[ 2.215759] Disabling unused clock "gpt10_fck"
[ 2.215789] Disabling unused clock "sad2d_ick"
[ 2.215820] Disabling unused clock "dpll4_m6x2_ck"
[ 2.215820] Disabling unused clock "dpll3_m3x2_ck"
[ 2.215850] Disabling unused clock "sys_clkout1"
[ 2.216522] registered taskstats version 1
[ 2.220916] fbcvt: 1024x768@60: CVT Name - .786M3-R
[ 2.244598] Console: switching to colour frame buffer device 128x48
[ 2.261596] regulator_init_complete: incomplete constraints, leaving VDAC on
[ 2.269134] regulator_init_complete: incomplete constraints, leaving VUSB3V1 on
[ 2.276855] regulator_init_complete: incomplete constraints, leaving VUSB1V8 on
[ 2.284637] regulator_init_complete: incomplete constraints, leaving VUSB1V5 on
[ 2.293243] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 2.302001] Freeing init memory: 236K
[ 2.310424] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 2.330810] hub 1-1:1.0: USB hub found
[ 2.337829] mmc0: new high speed SDHC card at address 1234
[ 2.343933] hub 1-1:1.0: 2 ports detected
[ 2.352386] mmcblk0: mmc0:1234 SA04G 3.67 GiB
[ 2.362884] mmcblk0: p1 p2
[ 2.476806] udev[62]: starting version 163
[ 2.658020] usb 1-1.1: new low speed USB device using ehci-omap and address 3
[ 3.025268] usb 1-1.2: new low speed USB device using ehci-omap and address 4
[ 3.579895] usbcore: registered new interface driver hiddev
[ 3.609252] input: Logitech HID compliant keyboard as /devices/platform/ehci-omap.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input0
[ 3.636444] generic-usb 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-ehci-omap.0-1.1/input0
[ 3.677673] input: Logitech HID compliant keyboard as /devices/platform/ehci-omap.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input1
[ 3.693450] generic-usb 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-ehci-omap.0-1.1/input1
[ 3.724670] input: Logitech USB Laser Mouse as /devices/platform/ehci-omap.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
[ 3.758178] generic-usb 0003:046D:C061.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-ehci-omap.0-1.2/input0
[ 3.780303] usbcore: registered new interface driver usbhid
[ 3.790039] usbhid: USB HID core driver
[ 4.388824] Btrfs loaded
[ 4.641021] EXT3-fs: barriers not enabled
[ 4.648712] kjournald starting. Commit interval 5 seconds
[ 4.654449] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[ 6.949340] udev[305]: starting version 163
[ 6.991027] EXT3-fs (mmcblk0p2): using internal journal
[ 7.864624] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input3
[ 8.013763] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 8.137145] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 8.254364] Registered led device: gpio-led:red:d0
[ 8.254486] Registered led device: gpio-led:green:d0
[ 8.254608] Registered led device: gpio-led:red:d1
[ 8.273712] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
[ 8.383392] Registered led device: gpio-led:green:d1
[ 8.658233] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 8.658264] musb_hdrc: MHDRC RTL version 1.400
[ 8.658294] musb_hdrc: setup fifo_mode 4
[ 8.658294] musb_hdrc: 28/31 max ep, 16384/16384 memory
[ 8.658538] musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[ 10.298614] net eth0: SMSC911x/921x identified at 0xe0808000, IRQ: 336
[ 10.548645] eth0: IPv6 duplicate address fe80::3807:32ff:fe6b:6e3 detected!
[ 11.985473] Adding 524284k swap on /SWAP.swap. Priority:-1 extents:436 across:1778196k SS