rendered paste bodydmesg
Initializing cgroup subsys cpu
Linux version 2.6.39-rc7+ (root@multivac) (gcc version 4.5.2 (Gentoo 4.5.2 p1.1, pie-0.4.5) ) #66 SMP PREEMPT Mon May 16 16:48:31 CEST 2011
Command line: root=/dev/sdg6
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009a800 (usable)
BIOS-e820: 000000000009a800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cefcf000 (usable)
BIOS-e820: 00000000cefcf000 - 00000000cf026000 (ACPI NVS)
BIOS-e820: 00000000cf026000 - 00000000cf5a2000 (reserved)
BIOS-e820: 00000000cf5a2000 - 00000000cf5b3000 (ACPI NVS)
BIOS-e820: 00000000cf5b3000 - 00000000cf5ca000 (reserved)
BIOS-e820: 00000000cf5ca000 - 00000000cf5cc000 (usable)
BIOS-e820: 00000000cf5cc000 - 00000000cf5d4000 (reserved)
BIOS-e820: 00000000cf5d4000 - 00000000cf5de000 (ACPI NVS)
BIOS-e820: 00000000cf5de000 - 00000000cf63a000 (reserved)
BIOS-e820: 00000000cf63a000 - 00000000cf67d000 (ACPI NVS)
BIOS-e820: 00000000cf67d000 - 00000000cf800000 (usable)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000022f800000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: System manufacturer System Product Name/P8P67 PRO, BIOS 1502 03/02/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x22f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FC0000000 write-back
2 base 0D0000000 mask FF0000000 uncachable
3 base 0E0000000 mask FE0000000 uncachable
4 base 22F800000 mask FFF800000 uncachable
5 base 230000000 mask FF0000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 1GB, type WB
reg 2, base: 3328MB, range: 256MB, type UC
reg 3, base: 3584MB, range: 512MB, type UC
reg 4, base: 8952MB, range: 8MB, type UC
reg 5, base: 8960MB, range: 256MB, type UC
total RAM covered: 8184M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 512MB, type WB
reg 5, base: 8704MB, range: 256MB, type WB
reg 6, base: 8952MB, range: 8MB, type UC
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcf800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000098000] 98000 size 8192
init_memory_mapping: 0000000000000000-00000000cf800000
0000000000 - 00cf800000 page 2M
kernel direct mapping tables up to cf800000 @ cf7fb000-cf800000
init_memory_mapping: 0000000100000000-000000022f800000
0100000000 - 022f800000 page 2M
kernel direct mapping tables up to 22f800000 @ 22f7f6000-22f800000
ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
ACPI: XSDT 00000000cf01d068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000cf0259d8 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000cf01d140 08891 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000cf5d5f80 00040
ACPI: APIC 00000000cf025ad0 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000cf025b68 001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000cf025d40 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000cf025d80 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea0007bfffff] PMD -> [ffff88021c000000-ffff8802231fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0022f800
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000010 -> 0x0000009a
0: 0x00000100 -> 0x000cefcf
0: 0x000cf5ca -> 0x000cf5cc
0: 0x000cf67d -> 0x000cf800
0: 0x00100000 -> 0x0022f800
On node 0 totalpages: 2091230
DMA zone: 56 pages used for memmap
DMA zone: 2 pages reserved
DMA zone: 3920 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 829836 pages, LIFO batch:31
Normal zone: 16996 pages used for memmap
Normal zone: 1226140 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
Allocating PCI resources starting at cf800000 (gap: cf800000:2f51c000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88022f400000 s75328 r8192 d22976 u262144
pcpu-alloc: s75328 r8192 d22976 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2059896
Kernel command line: root=/dev/sdg6
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 8158368k/9166848k available (4830k kernel code, 801928k absent, 206552k reserved, 4132k data, 480k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptable hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3374.302 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6748.60 BogoMIPS (lpj=3374302)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20110316
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 98000
#2
smpboot cpu 2: start_ip = 98000
#3
smpboot cpu 3: start_ip = 98000
#4
smpboot cpu 4: start_ip = 98000
#5
smpboot cpu 5: start_ip = 98000
#6
smpboot cpu 6: start_ip = 98000
#7 Ok.
smpboot cpu 7: start_ip = 98000
Brought up 8 CPUs
Total of 8 processors activated (54348.86 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110316/psargs-359)
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110316/nsinit-349)
ACPI: SSDT 00000000cf5dd898 006F4 (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 006F4 (v01 AMI IST 00000001 MSFT 03000001)
ACPI: SSDT 00000000cf5d4d98 000E4 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000E4 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xfe725000-0xfe72500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:19.0: [8086:1503] type 0 class 0x000200
pci 0000:00:19.0: reg 10: [mem 0xfe700000-0xfe71ffff]
pci 0000:00:19.0: reg 14: [mem 0xfe724000-0xfe724fff]
pci 0000:00:19.0: reg 18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xfe723000-0xfe7233ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.6: [8086:244e] type 1 class 0x000604
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xfe722000-0xfe7223ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.0: [8086:1c46] type 0 class 0x000601
pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xfe721000-0xfe7217ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfe720000-0xfe7200ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [1002:68f9] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfe620000-0xfe63ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfe600000-0xfe61ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xfe640000-0xfe643fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: [1033:0194] type 0 class 0x000c03
pci 0000:03:00.0: reg 10: [mem 0xfe500000-0xfe501fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.1: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: [197b:2362] type 0 class 0x000101
pci 0000:05:00.0: reg 10: [io 0xd040-0xd047]
pci 0000:05:00.0: reg 14: [io 0xd030-0xd033]
pci 0000:05:00.0: reg 18: [io 0xd020-0xd027]
pci 0000:05:00.0: reg 1c: [io 0xd010-0xd013]
pci 0000:05:00.0: reg 20: [io 0xd000-0xd00f]
pci 0000:05:00.0: reg 24: [mem 0xfe410000-0xfe4101ff]
pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 05-05]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:00.0: [1033:0194] type 0 class 0x000c03
pci 0000:06:00.0: reg 10: [mem 0xfe300000-0xfe301fff 64bit]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 06-06]
pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:07:00.0: [1b21:1080] type 1 class 0x000604
pci 0000:00:1c.6: PCI bridge to [bus 07-08] (subtractive decode)
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:1c.6: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000c8000-0x000dffff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
pci 0000:08:01.0: [1102:0002] type 0 class 0x000401
pci 0000:08:01.0: reg 10: [io 0xc080-0xc09f]
pci 0000:08:01.0: supports D1 D2
pci 0000:08:01.1: [1102:7002] type 0 class 0x000980
pci 0000:08:01.1: reg 10: [io 0xc0a0-0xc0a7]
pci 0000:08:01.1: supports D1 D2
pci 0000:08:03.0: [1106:3044] type 0 class 0x000c00
pci 0000:08:03.0: reg 10: [mem 0xfe200000-0xfe2007ff]
pci 0000:08:03.0: reg 14: [io 0xc000-0xc07f]
pci 0000:08:03.0: supports D2
pci 0000:08:03.0: PME# supported from D2 D3hot D3cold
pci 0000:08:03.0: PME# disabled
pci 0000:07:00.0: PCI bridge to [bus 08-08] (subtractive decode)
pci 0000:07:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:07:00.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:07:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:07:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode)
pci 0000:07:00.0: bridge window [mem 0xfe200000-0xfe2fffff] (subtractive decode)
pci 0000:07:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:07:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:07:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:07:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:07:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:07:00.0: bridge window [mem 0x000c8000-0x000dffff] (subtractive decode)
pci 0000:07:00.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
pci 0000:09:00.0: [1b4b:9172] type 0 class 0x000106
pci 0000:09:00.0: reg 10: [io 0xb040-0xb047]
pci 0000:09:00.0: reg 14: [io 0xb030-0xb033]
pci 0000:09:00.0: reg 18: [io 0xb020-0xb027]
pci 0000:09:00.0: reg 1c: [io 0xb010-0xb013]
pci 0000:09:00.0: reg 20: [io 0xb000-0xb00f]
pci 0000:09:00.0: reg 24: [mem 0xfe110000-0xfe1101ff]
pci 0000:09:00.0: reg 30: [mem 0xfe100000-0xfe10ffff pref]
pci 0000:09:00.0: PME# supported from D3hot
pci 0000:09:00.0: PME# disabled
pci 0000:00:1c.7: PCI bridge to [bus 09-09]
pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.7: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:1c.7: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.BR24._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1c) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009a800 - 000000000009ffff
reserve RAM buffer: 00000000cefcf000 - 00000000cfffffff
reserve RAM buffer: 00000000cf5cc000 - 00000000cfffffff
reserve RAM buffer: 00000000cf800000 - 00000000cfffffff
reserve RAM buffer: 000000022f800000 - 000000022fffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c8000-0x000dffff window]
pnp 00:00: [mem 0xd0000000-0xffffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed10000-0xfed19fff]
pnp 00:01: [mem 0xe0000000-0xe3ffffff]
pnp 00:01: [mem 0xfed90000-0xfed93fff]
pnp 00:01: [mem 0xfed20000-0xfed3ffff]
pnp 00:01: [mem 0xfee00000-0xfee0ffff]
system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
Switched to NOHz mode on CPU #6
Switched to NOHz mode on CPU #7
Switched to NOHz mode on CPU #4
Switched to NOHz mode on CPU #5
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #0
system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io 0x0290-0x029f]
pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0081-0x0083]
pnp 00:03: [io 0x0087]
pnp 00:03: [io 0x0089-0x008b]
pnp 00:03: [io 0x008f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io 0x0070-0x0071]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x0010-0x001f]
pnp 00:06: [io 0x0022-0x003f]
pnp 00:06: [io 0x0044-0x005f]
pnp 00:06: [io 0x0063]
pnp 00:06: [io 0x0065]
pnp 00:06: [io 0x0067-0x006f]
pnp 00:06: [io 0x0072-0x007f]
pnp 00:06: [io 0x0080]
pnp 00:06: [io 0x0084-0x0086]
pnp 00:06: [io 0x0088]
pnp 00:06: [io 0x008c-0x008e]
pnp 00:06: [io 0x0090-0x009f]
pnp 00:06: [io 0x00a2-0x00bf]
pnp 00:06: [io 0x00e0-0x00ef]
pnp 00:06: [io 0x04d0-0x04d1]
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io 0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io 0x0400-0x0453]
pnp 00:09: [io 0x0458-0x047f]
pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:09: [io 0x0500-0x057f]
pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
pnp 00:09: [mem 0xfec00000-0xfecfffff]
pnp 00:09: [mem 0xfed08000-0xfed08fff]
pnp 00:09: [mem 0xff000000-0xffffffff]
system 00:09: [io 0x0400-0x0453] has been reserved
system 00:09: [io 0x0458-0x047f] has been reserved
system 00:09: [io 0x0500-0x057f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0a: [io 0x0454-0x0457]
system 00:0a: [io 0x0454-0x0457] has been reserved
system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0b: [mem 0xfed00000-0xfed003ff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.3: BAR 9: assigned [mem 0xe4000000-0xe40fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io disabled]
pci 0000:00:1c.1: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.1: bridge window [mem pref disabled]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io disabled]
pci 0000:00:1c.2: bridge window [mem disabled]
pci 0000:00:1c.2: bridge window [mem pref disabled]
pci 0000:05:00.0: BAR 6: assigned [mem 0xe4000000-0xe400ffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-05]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:1c.3: bridge window [mem 0xe4000000-0xe40fffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 06-06]
pci 0000:00:1c.4: bridge window [io disabled]
pci 0000:00:1c.4: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:1c.4: bridge window [mem pref disabled]
pci 0000:07:00.0: PCI bridge to [bus 08-08]
pci 0000:07:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:07:00.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:07:00.0: bridge window [mem pref disabled]
pci 0000:00:1c.6: PCI bridge to [bus 07-08]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:1c.6: bridge window [mem pref disabled]
pci 0000:00:1c.7: PCI bridge to [bus 09-09]
pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.7: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:1c.7: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:07:00.0: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:05: resource 2 [mem 0xe4000000-0xe40fffff pref]
pci_bus 0000:06: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000c8000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0xd0000000-0xffffffff]
pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:08: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:08: resource 4 [io 0xc000-0xcfff]
pci_bus 0000:08: resource 5 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:08: resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:08: resource 9 [io 0x0d00-0xffff]
pci_bus 0000:08: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: resource 11 [mem 0x000c8000-0x000dffff]
pci_bus 0000:08: resource 12 [mem 0xd0000000-0xffffffff]
pci_bus 0000:09: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:09: resource 1 [mem 0xfe100000-0xfe1fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800cafcf000 - ffff8800cefcf000
software IO TLB at phys 0xcafcf000 - 0xcefcf000
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x14
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
fuse init (API version 7.16)
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 15934
NET: Registered protocol family 38
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
pcieport 0000:00:1c.7: irq 46 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe721000 port 0xfe721100 irq 47
ata2: SATA max UDMA/133 abar m2048@0xfe721000 port 0xfe721180 irq 47
ata3: SATA max UDMA/133 abar m2048@0xfe721000 port 0xfe721200 irq 47
ata4: SATA max UDMA/133 abar m2048@0xfe721000 port 0xfe721280 irq 47
ata5: SATA max UDMA/133 abar m2048@0xfe721000 port 0xfe721300 irq 47
ata6: SATA max UDMA/133 abar m2048@0xfe721000 port 0xfe721380 irq 47
ahci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:05:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfe410000 port 0xfe410100 irq 19
ata8: SATA max UDMA/133 abar m512@0xfe410000 port 0xfe410180 irq 19
ahci 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:09:00.0: irq 48 for MSI/MSI-X
ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
ahci 0000:09:00.0: setting latency timer to 64
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m512@0xfe110000 port 0xfe110100 irq 48
ata10: SATA max UDMA/133 abar m512@0xfe110000 port 0xfe110180 irq 48
e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) bc:ae:c5:77:ec:75
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfe723000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe722000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
xhci_hcd 0000:03:00.0: setting latency timer to 64
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:03:00.0: irq 17, io mem 0xfe500000
xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 52 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 53 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 54 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 55 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 56 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 57 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:06:00.0: setting latency timer to 64
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.0: irq 16, io mem 0xfe300000
xhci_hcd 0000:06:00.0: irq 58 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 59 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 60 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 61 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 62 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 63 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 64 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 65 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
coretemp coretemp.0: TjMax is 98 C.
coretemp coretemp.1: TjMax is 98 C.
coretemp coretemp.2: TjMax is 98 C.
coretemp coretemp.3: TjMax is 98 C.
w83627ehf: Found NCT6776F chip at 0x290
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
EMU10K1_Audigy 0000:08:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9.00: ATA-8: INTEL SSDSA2CT040G3, 4PC10302, max UDMA/133
ata9.00: 78165360 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata9.00: configured for UDMA/133
ata4.00: ATA-7: Maxtor 6L250S0, BACE1G20, max UDMA/133
ata4.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
ata2.00: ATA-8: WDC WD20EARS-00J2GB0, 80.00A80, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD20EARS-00J 80.0 PQ: 0 ANSI: 5
ata3.00: configured for UDMA/133
ata5.00: ATA-7: WDC WD7500AAKS-00RBA0, 30.04G30, max UDMA/133
ata5.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
scsi 3:0:0:0: Direct-Access ATA Maxtor 6L250S0 BACE PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
ata5.00: configured for UDMA/133
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdd] 490234752 512-byte logical blocks: (251 GB/233 GiB)
sd 3:0:0:0: Attached scsi generic sg3 type 0
scsi 4:0:0:0: Direct-Access ATA WDC WD7500AAKS-0 30.0 PQ: 0 ANSI: 5
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
HDA Intel 0000:01:00.1: irq 66 for MSI/MSI-X
HDA Intel 0000:01:00.1: setting latency timer to 64
sd 4:0:0:0: [sde] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ALSA device list:
#0: SB Live! Value [CT4832] (rev.7, serial:0x80271102) at 0xc080, irq 19
#1: HD-Audio Generic at 0xfe640000 irq 66
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
registered taskstats version 1
sde: sde1 sde2 < sde5 >
rtc_cmos 00:04: setting system clock to 2011-05-16 16:49:28 UTC (1305564568)
sd 4:0:0:0: [sde] Attached SCSI disk
sdc: unknown partition table
sd 2:0:0:0: [sdc] Attached SCSI disk
ata6.00: ATA-8: ST31000528AS, CC34, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
sdd: unknown partition table
sd 3:0:0:0: [sdd] Attached SCSI disk
sdb: unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 8:0:0:0: Direct-Access ATA INTEL SSDSA2CT04 4PC1 PQ: 0 ANSI: 5
sd 8:0:0:0: [sdg] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 8:0:0:0: Attached scsi generic sg6 type 0
sd 8:0:0:0: [sdg] Write Protect is off
sd 8:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdg: sdg1 sdg2 < sdg5 sdg6 >
sd 8:0:0:0: [sdg] Attached SCSI disk
sdf: unknown partition table
sd 5:0:0:0: [sdf] Attached SCSI disk
EXT4-fs (sdg6): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext2 filesystem) readonly on device 8:102.
Freeing unused kernel memory: 480k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1292k freed
Freeing unused kernel memory: 208k freed
usb 1-1: new high speed USB device number 2 using ehci_hcd
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device number 2 using ehci_hcd
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
udev: starting version 151
udevd (4323): /proc/4323/oom_adj is deprecated, please use /proc/4323/oom_score_adj instead.
Refined TSC clocksource calibration: 3400.022 MHz.
Switching to clocksource tsc
usb 5-2: new full speed USB device number 2 using xhci_hcd
xhci_hcd 0000:06:00.0: WARN: Stalled endpoint
xhci_hcd 0000:06:00.0: WARN: Stalled endpoint
xhci_hcd 0000:06:00.0: WARN: Stalled endpoint
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeon 0000:01:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9).
[drm] register mmio base: 0xFE620000
[drm] register mmio size: 131072
ATOM BIOS: CEDAR
radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 4080182 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 67 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading CEDAR Microcode
radeon 0000:01:00.0: WB enabled
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
failed to evaluate ATIF got AE_BAD_PARAMETER
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DisplayPort
[drm] HPD2
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DVI-I
[drm] HPD4
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 2:
[drm] VGA
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: Stalled endpoint
input: Logitech G700 Laser Mouse as /devices/pci0000:00/0000:00:1c.4/0000:06:00.0/usb5/5-2/5-2:1.0/input/input2
generic-usb 0003:046D:C06B.0001: input: USB HID v1.11 Mouse [Logitech G700 Laser Mouse] on usb-0000:06:00.0-2/input0
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: Stalled endpoint
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
input: Logitech G700 Laser Mouse as /devices/pci0000:00/0000:00:1c.4/0000:06:00.0/usb5/5-2/5-2:1.1/input/input3
generic-usb 0003:046D:C06B.0002: input,hiddev0: USB HID v1.11 Keyboard [Logitech G700 Laser Mouse] on usb-0000:06:00.0-2/input1
usb 2-1.2: new high speed USB device number 3 using ehci_hcd
hub 2-1.2:1.0: USB hub found
hub 2-1.2:1.0: 4 ports detected
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
usb 2-1.5: new low speed USB device number 4 using ehci_hcd
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 9216000
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input4
microsoft 0003:045E:00DB.0003: input: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1.5/input0
input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input5
microsoft 0003:045E:00DB.0004: input: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1.5/input1
usb 2-1.7: new full speed USB device number 5 using ehci_hcd
Console: switching to colour frame buffer device 240x75
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.9.0 20080528 for 0000:01:00.0 on minor 0
usb 2-1.2.3: new low speed USB device number 6 using ehci_hcd
input: USB,2-axis 8-button gamepad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.3/2-1.2.3:1.0/input/input6
generic-usb 0003:0583:2060.0005: input: USB HID v1.10 Joystick [USB,2-axis 8-button gamepad ] on usb-0000:00:1d.0-1.2.3/input0
EXT4-fs (sdg6): re-mounted. Opts: (null)
EXT4-fs (sdg1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sdc): mounted filesystem with ordered data mode. Opts: (null)
XFS (sde5): Mounting Filesystem
XFS (sde5): Ending clean mount
EXT4-fs (sdd): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sdd): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdf): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sdf): mounted filesystem with ordered data mode. Opts: (null)
Adding 979928k swap on /dev/sda6. Priority:0 extents:1 across:979928k
Adding 1023996k swap on /dev/sdg5. Priority:1 extents:1 across:1023996k SS
ip_tables: (C) 2000-2006 Netfilter Core Team
e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[drm:select_subconnector_show] *ERROR* Unable to find select subconnector property
[drm:subconnector_show] *ERROR* Unable to find subconnector property
ata1.00: configured for UDMA/133
ata1: EH complete
ata2.00: configured for UDMA/133
ata2: EH complete
ata3.00: configured for UDMA/133
ata3: EH complete
ata4.00: configured for UDMA/133
ata4: EH complete
ata5.00: configured for UDMA/133
ata5: EH complete
ata6.00: configured for UDMA/133
ata6: EH complete
ata9.00: configured for UDMA/133
ata9: EH complete
EXT4-fs (sdg1): re-mounted. Opts: commit=0
EXT4-fs (sda7): re-mounted. Opts: commit=0
EXT4-fs (sdb): re-mounted. Opts: commit=0
EXT4-fs (sdc): re-mounted. Opts: commit=0
EXT4-fs (sdd): re-mounted. Opts: commit=0
EXT4-fs (sdf): re-mounted. Opts: commit=0
multivac ~ #