Untitled

Index: target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c===================================================================--- target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c	(revisione 26868)+++ target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c	(copia locale)@@ -145,8 +145,8 @@ 	ar71xx_eth1_data.mac_addr[0] |= 0x02; } -#define UBNT_RS_WAN_PHYMASK	(1 << 20)-#define UBNT_RS_LAN_PHYMASK	((1 << 16) | (1 << 17) | (1 << 18) | (1 << 19))+#define UBNT_RS_WAN_PHYMASK	BIT(20)+#define UBNT_RS_LAN_PHYMASK	(BIT(16) | BIT(17) | BIT(18) | BIT(19))  static void __init ubnt_rs_setup(void) {@@ -175,8 +175,8 @@ MIPS_MACHINE(AR71XX_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation", 	     ubnt_rs_setup); -#define UBNT_RSPRO_WAN_PHYMASK	(1 << 4)-#define UBNT_RSPRO_LAN_PHYMASK	((1 << 0) | (1 << 1) | (1 << 2) | (1 << 3))+#define UBNT_RSPRO_WAN_PHYMASK	BIT(4)+#define UBNT_RSPRO_LAN_PHYMASK	(BIT(0) | BIT(1) | BIT(2) | BIT(3))  static void __init ubnt_rspro_setup(void) {@@ -214,7 +214,7 @@  MIPS_MACHINE(AR71XX_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup); -#define UBNT_LSSR71_PHY_MASK	(1 << 1)+#define UBNT_LSSR71_PHY_MASK	BIT(1)  static void __init ubnt_lssr71_setup(void) {@@ -235,6 +235,9 @@ MIPS_MACHINE(AR71XX_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71", 	     ubnt_lssr71_setup); +#define UBNT_M_WAN_PHYMASK	BIT(4)+#define UBNT_M_LAN_PHYMASK	BIT(0)+ static void __init ubnt_m_setup(void) { 	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);@@ -243,13 +246,14 @@  	ar71xx_add_device_m25p80(NULL); -	ar71xx_add_device_mdio(~0);+	ar71xx_add_device_mdio(~(UBNT_M_WAN_PHYMASK | UBNT_M_LAN_PHYMASK));  	ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0); 	ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 0);-	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; 	ar71xx_eth0_data.speed = SPEED_100; 	ar71xx_eth0_data.duplex = DUPLEX_FULL;+	ar71xx_eth0_data.phy_mask = UBNT_M_WAN_PHYMASK;  	ar71xx_add_device_eth(0); @@ -284,6 +288,7 @@ 	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; 	ar71xx_eth1_data.speed = SPEED_1000; 	ar71xx_eth1_data.duplex = DUPLEX_FULL;+	ar71xx_eth1_data.phy_mask = UBNT_M_LAN_PHYMASK;  	ar71xx_add_device_eth(1); }Index: target/linux/ar71xx/files/drivers/net/ag71xx/ag71xx.h===================================================================--- target/linux/ar71xx/files/drivers/net/ag71xx/ag71xx.h	(revisione 26868)+++ target/linux/ar71xx/files/drivers/net/ag71xx/ag71xx.h	(copia locale)@@ -25,6 +25,7 @@ #include <linux/platform_device.h> #include <linux/ethtool.h> #include <linux/etherdevice.h>+#include <linux/if_vlan.h> #include <linux/phy.h> #include <linux/skbuff.h> #include <linux/dma-mapping.h>@@ -35,10 +36,8 @@ #include <asm/mach-ar71xx/ar71xx.h> #include <asm/mach-ar71xx/platform.h> -#define ETH_FCS_LEN	4- #define AG71XX_DRV_NAME		"ag71xx"-#define AG71XX_DRV_VERSION	"0.5.35"+#define AG71XX_DRV_VERSION	"0.5.36"  #define AG71XX_NAPI_WEIGHT	64 #define AG71XX_OOM_REFILL	(1 + HZ/10)@@ -54,7 +53,7 @@ #define AG71XX_TX_MTU_LEN	1540 #define AG71XX_RX_PKT_RESERVE	64 #define AG71XX_RX_PKT_SIZE	\-	(AG71XX_RX_PKT_RESERVE + ETH_HLEN + ETH_FRAME_LEN + ETH_FCS_LEN)+	(AG71XX_RX_PKT_RESERVE + ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN)  #define AG71XX_TX_RING_SIZE	64 #define AG71XX_TX_THRES_STOP	(AG71XX_TX_RING_SIZE - 4)