rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-28-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu SMP Mon Jan 10 21:21:01 UTC 2011 (Ubuntu 2.6.32-28.55-generic 2.6.32.27+drm33.12)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3fef0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003fef0000 (usable)
[ 0.000000] modified: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[ 0.000000] modified: 000000003fef3000 - 000000003ff00000 (ACPI data)
[ 0.000000] modified: 00000000f0000000 - 00000000f2000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 3f5fa000 - 3feeec4d
[ 0.000000] Allocated new RAMDISK: 008e5000 - 011d9c4d
[ 0.000000] Move RAMDISK from 000000003f5fa000 - 000000003feeec4c to 008e5000 - 011d9c4c
[ 0.000000] ACPI: RSDP 000f77c0 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 3fef30c0 00044 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 3fef9740 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 3fef3240 064AC (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 3fef0000 00040
[ 0.000000] ACPI: HPET 3fef9980 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 3fef9a00 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 3fef9880 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 134MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008e0ed8] TEXT DATA BSS ==> [0000100000 - 00008e0ed8]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [00008e1000 - 00008e4151] BRK ==> [00008e1000 - 00008e4151]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008e5000 - 00011d9c4d] NEW RAMDISK ==> [00008e5000 - 00011d9c4d]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00f5c80] f5c80
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003fef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fef0
[ 0.000000] On node 0 totalpages: 261759
[ 0.000000] free_area_init_node: node 0, pgdat c079c8c0, node_mem_map c11db200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 270 pages used for memmap
[ 0.000000] HighMem zone: 34276 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:b0100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36056 r0 d21288 u1048576
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259713
[ 0.000000] Kernel command line: initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash -- BOOT_IMAGE=/casper/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5237120 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003fef0)
[ 0.000000] Memory: 1014752k/1047488k available (4685k kernel code, 31628k reserved, 2125k data, 660k init, 138184k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a7000 - 0xc084c000 ( 660 kB)
[ 0.000000] .data : 0xc05936e7 - 0xc07a6e88 (2125 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05936e7 (4685 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2666.579 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.15 BogoMIPS (lpj=10666316)
[ 0.004016] Security Framework initialized
[ 0.004028] AppArmor: AppArmor initialized
[ 0.004033] Mount-cache hash table entries: 512
[ 0.004116] Initializing cgroup subsys ns
[ 0.004118] Initializing cgroup subsys cpuacct
[ 0.004122] Initializing cgroup subsys memory
[ 0.004127] Initializing cgroup subsys devices
[ 0.004129] Initializing cgroup subsys freezer
[ 0.004130] Initializing cgroup subsys net_cls
[ 0.004144] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004146] CPU: L2 cache: 4096K
[ 0.004149] CPU: Physical Processor ID: 0
[ 0.004150] CPU: Processor Core ID: 0
[ 0.004153] mce: CPU supports 6 MCE banks
[ 0.004159] CPU0: Thermal monitoring enabled (TM1)
[ 0.004161] using mwait in idle threads.
[ 0.004165] Performance Events: Core2 events, Intel PMU driver.
[ 0.004171] ... version: 2
[ 0.004172] ... bit width: 40
[ 0.004173] ... generic registers: 2
[ 0.004175] ... value mask: 000000ffffffffff
[ 0.004176] ... max period: 000000007fffffff
[ 0.004178] ... fixed-purpose events: 3
[ 0.004179] ... event mask: 0000000700000003
[ 0.004182] Checking 'hlt' instruction... OK.
[ 0.021997] ACPI: Core revision 20090903
[ 0.028008] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.028011] ftrace: allocating 21796 entries in 43 pages
[ 0.032043] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032451] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072904] CPU0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 4096K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM1)
[ 0.160071] CPU1: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b
[ 0.160077] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164017] Brought up 2 CPUs
[ 0.164019] Total of 2 processors activated (10666.46 BogoMIPS).
[ 0.164523] CPU0 attaching sched-domain:
[ 0.164526] domain 0: span 0-1 level MC
[ 0.164528] groups: 0 1
[ 0.164532] CPU1 attaching sched-domain:
[ 0.164534] domain 0: span 0-1 level MC
[ 0.164535] groups: 1 0
[ 0.164585] devtmpfs: initialized
[ 0.164585] regulator: core version 0.5
[ 0.164585] Time: 22:05:39 Date: 01/01/07
[ 0.164585] NET: Registered protocol family 16
[ 0.164585] Trying to unpack rootfs image as initramfs...
[ 0.164585] EISA bus registered
[ 0.164585] ACPI: bus type pci registered
[ 0.164585] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31
[ 0.164585] PCI: MCFG area at f0000000 reserved in E820
[ 0.164585] PCI: Using MMCONFIG for extended config space
[ 0.164585] PCI: Using configuration type 1 for base access
[ 1.164134] bio: create slab <bio-0> at 0
[ 1.165085] ACPI: EC: Look up EC in DSDT
[ 1.171429] ACPI: Interpreter enabled
[ 1.171434] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.171456] ACPI: Using IOAPIC for interrupt routing
[ 1.178666] ACPI: No dock devices found.
[ 1.178733] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.179530] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.179533] pci 0000:00:03.0: PME# disabled
[ 1.179584] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.179586] pci 0000:00:07.0: PME# disabled
[ 1.179829] pci 0000:00:0a.1: reg 20 io port: [0x1c00-0x1c3f]
[ 1.179835] pci 0000:00:0a.1: reg 24 io port: [0x1c80-0x1cbf]
[ 1.179860] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 1.179865] pci 0000:00:0a.1: PME# disabled
[ 1.179935] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
[ 1.179966] pci 0000:00:0b.0: supports D1 D2
[ 1.179967] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.179971] pci 0000:00:0b.0: PME# disabled
[ 1.179998] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
[ 1.180033] pci 0000:00:0b.1: supports D1 D2
[ 1.180035] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.180038] pci 0000:00:0b.1: PME# disabled
[ 1.180080] pci 0000:00:0d.0: reg 20 io port: [0xfd00-0xfd0f]
[ 1.180125] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7]
[ 1.180130] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3]
[ 1.180134] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977]
[ 1.180139] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73]
[ 1.180143] pci 0000:00:0e.0: reg 20 io port: [0xf800-0xf80f]
[ 1.180148] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 1.180198] pci 0000:00:0f.0: reg 10 io port: [0x9e0-0x9e7]
[ 1.180203] pci 0000:00:0f.0: reg 14 io port: [0xbe0-0xbe3]
[ 1.180208] pci 0000:00:0f.0: reg 18 io port: [0x960-0x967]
[ 1.180212] pci 0000:00:0f.0: reg 1c io port: [0xb60-0xb63]
[ 1.180217] pci 0000:00:0f.0: reg 20 io port: [0xf300-0xf30f]
[ 1.180221] pci 0000:00:0f.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff]
[ 1.180317] pci 0000:00:10.1: reg 10 32bit mmio: [0xfe024000-0xfe027fff]
[ 1.180354] pci 0000:00:10.1: PME# supported from D3hot D3cold
[ 1.180358] pci 0000:00:10.1: PME# disabled
[ 1.180395] pci 0000:00:14.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 1.180400] pci 0000:00:14.0: reg 14 io port: [0xf200-0xf207]
[ 1.180425] pci 0000:00:14.0: supports D1 D2
[ 1.180427] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.180430] pci 0000:00:14.0: PME# disabled
[ 1.180483] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 1.180493] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 1.180504] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 1.180511] pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f]
[ 1.180517] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfbfe0000-0xfbffffff]
[ 1.180594] pci 0000:00:03.0: bridge io port: [0xe000-0xefff]
[ 1.180597] pci 0000:00:03.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
[ 1.180601] pci 0000:00:03.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 1.180643] pci 0000:02:00.0: reg 10 io port: [0xcf00-0xcf07]
[ 1.180650] pci 0000:02:00.0: reg 14 io port: [0xce00-0xce03]
[ 1.180656] pci 0000:02:00.0: reg 18 io port: [0xcd00-0xcd07]
[ 1.180664] pci 0000:02:00.0: reg 1c io port: [0xcc00-0xcc03]
[ 1.180670] pci 0000:02:00.0: reg 20 io port: [0xcb00-0xcb0f]
[ 1.180678] pci 0000:02:00.0: reg 24 32bit mmio: [0xfddfe000-0xfddfffff]
[ 1.180707] pci 0000:02:00.0: PME# supported from D3hot
[ 1.180711] pci 0000:02:00.0: PME# disabled
[ 1.180758] pci 0000:00:07.0: bridge io port: [0xc000-0xcfff]
[ 1.180761] pci 0000:00:07.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 1.180765] pci 0000:00:07.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
[ 1.180805] pci 0000:03:07.0: reg 10 32bit mmio: [0xfdfd0000-0xfdfdffff]
[ 1.180811] pci 0000:03:07.0: reg 14 32bit mmio: [0xfdfe0000-0xfdfeffff]
[ 1.180882] pci 0000:03:08.0: reg 10 32bit mmio: [0xfdfff000-0xfdfff7ff]
[ 1.180888] pci 0000:03:08.0: reg 14 io port: [0xdf00-0xdf7f]
[ 1.180925] pci 0000:03:08.0: supports D2
[ 1.180927] pci 0000:03:08.0: PME# supported from D2 D3hot D3cold
[ 1.180931] pci 0000:03:08.0: PME# disabled
[ 1.180961] pci 0000:00:10.0: transparent bridge
[ 1.180964] pci 0000:00:10.0: bridge io port: [0xd000-0xdfff]
[ 1.180967] pci 0000:00:10.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 1.180971] pci 0000:00:10.0: bridge 32bit mmio pref: [0xfde00000-0xfdefffff]
[ 1.180980] pci_bus 0000:00: on NUMA node 0
[ 1.180984] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.181196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 1.244299] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.244417] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
[ 1.244531] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
[ 1.244644] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.244758] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
[ 1.244871] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
[ 1.244983] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.245095] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.245209] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[ 1.245322] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.245435] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
[ 1.245547] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.245661] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 1.245773] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.245886] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.245999] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
[ 1.246112] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[ 1.246224] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.246338] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[ 1.246451] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[ 1.246594] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 1.246733] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 1.246871] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 1.247009] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 1.247147] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
[ 1.247284] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 1.247420] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 1.247558] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 1.247696] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 1.247835] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 1.247974] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 1.248116] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 1.248254] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 1.248393] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 1.248531] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 1.248673] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 1.248811] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 1.248949] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 1.249088] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 1.249228] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 1.249367] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 1.249479] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.249482] vgaarb: loaded
[ 1.249571] SCSI subsystem initialized
[ 1.249632] libata version 3.00 loaded.
[ 1.249687] usbcore: registered new interface driver usbfs
[ 1.249696] usbcore: registered new interface driver hub
[ 1.249714] usbcore: registered new device driver usb
[ 1.249813] ACPI: WMI: Mapper loaded
[ 1.249815] PCI: Using ACPI for IRQ routing
[ 1.249982] NetLabel: Initializing
[ 1.249983] NetLabel: domain hash size = 128
[ 1.249984] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.249994] NetLabel: unlabeled traffic allowed by default
[ 1.250020] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 1.250024] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 1.672049] Switching to clocksource tsc
[ 1.674036] AppArmor: AppArmor Filesystem Enabled
[ 1.674071] pnp: PnP ACPI init
[ 1.674108] ACPI: bus type pnp registered
[ 1.678603] pnp: PnP ACPI: found 13 devices
[ 1.678609] ACPI: ACPI bus type pnp unregistered
[ 1.678614] PnPBIOS: Disabled by ACPI PNP
[ 1.678634] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 1.678637] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 1.678639] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 1.678641] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 1.678643] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 1.678645] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 1.678653] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 1.678655] system 00:02: ioport range 0x800-0x87f has been reserved
[ 1.678658] system 00:02: ioport range 0x290-0x297 has been reserved
[ 1.678660] system 00:02: ioport range 0x880-0x88f has been reserved
[ 1.678669] system 00:0b: iomem range 0xf0000000-0xf1ffffff has been reserved
[ 1.678674] system 00:0c: iomem range 0xda000-0xdbfff has been reserved
[ 1.678676] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 1.678679] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 1.678681] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 1.678683] system 00:0c: iomem range 0xfeff0000-0xfeff00ff has been reserved
[ 1.678686] system 00:0c: iomem range 0x3fef0000-0x3fefffff could not be reserved
[ 1.678688] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
[ 1.678690] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 1.678693] system 00:0c: iomem range 0x100000-0x3feeffff could not be reserved
[ 1.678695] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 1.678697] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 1.678700] system 00:0c: iomem range 0xfeff0000-0xfeff03ff could not be reserved
[ 1.711701] Freeing initrd memory: 9171k freed
[ 1.713569] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
[ 1.713576] pci 0000:00:03.0: IO window: 0xe000-0xefff
[ 1.713581] pci 0000:00:03.0: MEM window: 0xf8000000-0xfbffffff
[ 1.713584] pci 0000:00:03.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 1.713590] pci 0000:00:07.0: PCI bridge, secondary bus 0000:02
[ 1.713593] pci 0000:00:07.0: IO window: 0xc000-0xcfff
[ 1.713597] pci 0000:00:07.0: MEM window: 0xfdd00000-0xfddfffff
[ 1.713601] pci 0000:00:07.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
[ 1.713607] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
[ 1.713610] pci 0000:00:10.0: IO window: 0xd000-0xdfff
[ 1.713614] pci 0000:00:10.0: MEM window: 0xfdf00000-0xfdffffff
[ 1.713618] pci 0000:00:10.0: PREFETCH window: 0xfde00000-0xfdefffff
[ 1.713646] pci 0000:00:03.0: setting latency timer to 64
[ 1.713655] pci 0000:00:07.0: setting latency timer to 64
[ 1.713662] pci 0000:00:10.0: setting latency timer to 64
[ 1.713668] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.713671] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 1.713673] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 1.713675] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff]
[ 1.713677] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[ 1.713680] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 1.713682] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 1.713684] pci_bus 0000:02: resource 2 pref mem [0xfdc00000-0xfdcfffff]
[ 1.713686] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 1.713688] pci_bus 0000:03: resource 1 mem: [0xfdf00000-0xfdffffff]
[ 1.713690] pci_bus 0000:03: resource 2 pref mem [0xfde00000-0xfdefffff]
[ 1.713692] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 1.713694] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 1.713772] NET: Registered protocol family 2
[ 1.713960] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.714460] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.716157] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.717099] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.717104] TCP reno registered
[ 1.717353] NET: Registered protocol family 1
[ 1.744093] pci 0000:01:00.0: Boot video device
[ 1.744258] cpufreq-nforce2: No nForce2 chipset.
[ 1.744281] Scanning for low memory corruption every 60 seconds
[ 1.744360] audit: initializing netlink socket (disabled)
[ 1.744371] type=2000 audit(1167689139.744:1): initialized
[ 1.751907] highmem bounce pool size: 64 pages
[ 1.751911] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.753096] VFS: Disk quotas dquot_6.5.2
[ 1.753141] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.753569] fuse init (API version 7.13)
[ 1.753636] msgmni has been set to 1731
[ 1.753806] alg: No test for stdrng (krng)
[ 1.753847] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.753850] io scheduler noop registered
[ 1.753851] io scheduler anticipatory registered
[ 1.753853] io scheduler deadline registered
[ 1.753882] io scheduler cfq registered (default)
[ 1.754015] alloc irq_desc for 24 on node -1
[ 1.754017] alloc kstat_irqs on node -1
[ 1.754025] pcieport 0000:00:03.0: irq 24 for MSI/MSI-X
[ 1.754030] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.754111] alloc irq_desc for 25 on node -1
[ 1.754113] alloc kstat_irqs on node -1
[ 1.754117] pcieport 0000:00:07.0: irq 25 for MSI/MSI-X
[ 1.754122] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.754173] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.754191] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.754268] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.754271] ACPI: Power Button [PWRB]
[ 1.754322] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.754324] ACPI: Power Button [PWRF]
[ 1.754368] fan PNP0C0B:00: registered as cooling_device0
[ 1.754372] ACPI: Fan [FAN] (on)
[ 1.754689] processor LNXCPU:00: registered as cooling_device1
[ 1.754717] processor LNXCPU:01: registered as cooling_device2
[ 1.758238] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.758246] ACPI: Thermal Zone [THRM] (40 C)
[ 1.758311] isapnp: Scanning for PnP cards...
[ 1.759346] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.759440] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.759767] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.760576] brd: module loaded
[ 1.760940] loop: module loaded
[ 1.760997] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.761120] pata_acpi 0000:00:0d.0: setting latency timer to 64
[ 1.761352] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 1.761355] alloc irq_desc for 23 on node -1
[ 1.761357] alloc kstat_irqs on node -1
[ 1.761361] pata_acpi 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 1.761374] pata_acpi 0000:00:0e.0: setting latency timer to 64
[ 1.761381] pata_acpi 0000:00:0e.0: PCI INT A disabled
[ 1.761596] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 1.761599] alloc irq_desc for 22 on node -1
[ 1.761600] alloc kstat_irqs on node -1
[ 1.761604] pata_acpi 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 1.761616] pata_acpi 0000:00:0f.0: setting latency timer to 64
[ 1.761623] pata_acpi 0000:00:0f.0: PCI INT A disabled
[ 1.761853] Fixed MDIO Bus: probed
[ 1.761878] PPP generic driver version 2.4.2
[ 1.761900] tun: Universal TUN/TAP device driver, 1.6
[ 1.761901] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.761964] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.762186] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 1.762188] alloc irq_desc for 21 on node -1
[ 1.762190] alloc kstat_irqs on node -1
[ 1.762193] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 1.762199] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 1.762202] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 1.762227] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 1.762241] ehci_hcd 0000:00:0b.1: debug port 1
[ 1.762248] ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported
[ 1.762262] ehci_hcd 0000:00:0b.1: irq 21, io mem 0xfe02e000
[ 1.772505] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 1.772566] usb usb1: configuration #1 chosen from 1 choice
[ 1.772587] hub 1-0:1.0: USB hub found
[ 1.772592] hub 1-0:1.0: 8 ports detected
[ 1.772637] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.772860] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 1.772862] alloc irq_desc for 20 on node -1
[ 1.772863] alloc kstat_irqs on node -1
[ 1.772867] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[ 1.772873] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 1.772876] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 1.772900] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 1.772917] ohci_hcd 0000:00:0b.0: irq 20, io mem 0xfe02f000
[ 1.830546] usb usb2: configuration #1 chosen from 1 choice
[ 1.830567] hub 2-0:1.0: USB hub found
[ 1.830574] hub 2-0:1.0: 8 ports detected
[ 1.830619] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.830675] PNP: No PS/2 controller found. Probing ports directly.
[ 1.831054] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.831058] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.831141] mice: PS/2 mouse device common for all mice
[ 1.831233] rtc_cmos 00:05: RTC can wake from S4
[ 1.831258] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.831287] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.831358] device-mapper: uevent: version 1.0.3
[ 1.831428] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.831475] device-mapper: multipath: version 1.1.0 loaded
[ 1.831477] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.831556] EISA: Probing bus 0 at eisa.0
[ 1.831560] Cannot allocate resource for EISA slot 1
[ 1.831578] EISA: Detected 0 cards.
[ 1.831630] cpuidle: using governor ladder
[ 1.831632] cpuidle: using governor menu
[ 1.831939] TCP cubic registered
[ 1.832058] NET: Registered protocol family 10
[ 1.832414] lo: Disabled Privacy Extensions
[ 1.832677] NET: Registered protocol family 17
[ 1.832708] Using IPI No-Shortcut mode
[ 1.832759] PM: Resume from disk failed.
[ 1.832767] registered taskstats version 1
[ 1.833123] Magic number: 7:888:96
[ 1.833176] rtc_cmos 00:05: setting system clock to 2007-01-01 22:05:41 UTC (1167689141)
[ 1.833178] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.833180] EDD information not available.
[ 2.111309] isapnp: No Plug & Play device found
[ 2.111323] Freeing unused kernel memory: 660k freed
[ 2.111647] Write protecting the kernel text: 4688k
[ 2.111678] Write protecting the kernel read-only data: 1844k
[ 2.126195] udev: starting version 151
[ 2.191065] pata_amd 0000:00:0d.0: version 0.4.1
[ 2.191105] pata_amd 0000:00:0d.0: setting latency timer to 64
[ 2.208879] scsi0 : pata_amd
[ 2.215750] scsi1 : pata_amd
[ 2.216298] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14
[ 2.216301] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15
[ 2.216383] sata_nv 0000:00:0e.0: version 3.5
[ 2.216395] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 2.216397] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 2.216437] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 2.216961] Linux agpgart interface v0.103
[ 2.216969] scsi2 : sata_nv
[ 2.220211] scsi3 : sata_nv
[ 2.220353] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 23
[ 2.220356] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 23
[ 2.220413] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 2.220643] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 2.220647] forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 2.220651] forcedeth 0000:00:14.0: setting latency timer to 64
[ 2.220677] nv_probe: set workaround bit for reversed mac addr
[ 2.221690] ahci 0000:02:00.0: version 3.0
[ 2.221930] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 2.221933] alloc irq_desc for 16 on node -1
[ 2.221935] alloc kstat_irqs on node -1
[ 2.221940] ahci 0000:02:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
[ 2.230454] Floppy drive(s): fd0 is 1.44M
[ 2.236521] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 2.236524] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.236529] ahci 0000:02:00.0: setting latency timer to 64
[ 2.236627] scsi4 : ahci
[ 2.236665] ata5: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16
[ 2.244515] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 2.247837] FDC 0 is a post-1991 82077
[ 2.372422] ata1.00: ATAPI: JLMS XJ-HD166S, DS18, max UDMA/33
[ 2.372442] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 2.372885] ata1.00: configured for UDMA/33
[ 2.373307] scsi 0:0:0:0: CD-ROM JLMS XJ-HD166S DS18 PQ: 0 ANSI: 5
[ 2.374708] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 2.374710] Uniform CD-ROM driver Revision: 3.20
[ 2.374773] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.374820] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.378846] usb 1-6: configuration #1 chosen from 1 choice
[ 2.384152] Initializing USB Mass Storage driver...
[ 2.384210] scsi5 : SCSI emulation for USB Mass Storage devices
[ 2.384270] usbcore: registered new interface driver usb-storage
[ 2.384272] USB Mass Storage support registered.
[ 2.384276] usb-storage: device found at 4
[ 2.384277] usb-storage: waiting for device to settle before scanning
[ 2.552021] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.680008] usb 2-3: new low speed USB device using ohci_hcd and address 2
[ 2.696020] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.704149] ata3.00: ATAPI: Optiarc DVD RW AD-7261S, 1.00, max UDMA/100
[ 2.720164] ata3.00: configured for UDMA/100
[ 2.721980] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7261S 1.00 PQ: 0 ANSI: 5
[ 2.726517] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.726583] sr 2:0:0:0: Attached scsi CD-ROM sr1
[ 2.726622] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.740713] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1d:60:1b:ab:fb
[ 2.740716] forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
[ 2.740751] sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 2.740753] sata_nv 0000:00:0f.0: Using SWNCQ mode
[ 2.740788] sata_nv 0000:00:0f.0: setting latency timer to 64
[ 2.740890] scsi6 : sata_nv
[ 2.740949] scsi7 : sata_nv
[ 2.741092] ata6: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 22
[ 2.741095] ata7: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 22
[ 2.909606] usb 2-3: configuration #1 chosen from 1 choice
[ 2.920116] usbcore: registered new interface driver hiddev
[ 2.930737] input: Chicony Saitek Eclipse II Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0/input/input3
[ 2.930789] generic-usb 0003:06A3:8021.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony Saitek Eclipse II Keyboard] on usb-0000:00:0b.0-3/input0
[ 2.961596] input: Chicony Saitek Eclipse II Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.1/input/input4
[ 2.961668] generic-usb 0003:06A3:8021.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Chicony Saitek Eclipse II Keyboard] on usb-0000:00:0b.0-3/input1
[ 2.961683] usbcore: registered new interface driver usbhid
[ 2.961685] usbhid: v2.6:USB HID core driver
[ 3.192017] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.212848] ata4.00: ATA-8: WDC WD5000AAJS-00YFA0, 12.01C02, max UDMA/133
[ 3.212851] ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.216007] usb 2-4: new low speed USB device using ohci_hcd and address 3
[ 3.228643] ata4.00: configured for UDMA/133
[ 3.228718] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAJS-0 12.0 PQ: 0 ANSI: 5
[ 3.228814] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 3.228881] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.228917] sd 3:0:0:0: [sda] Write Protect is off
[ 3.228919] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.228939] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.229168] sda: sda1
[ 3.234229] sd 3:0:0:0: [sda] Attached SCSI disk
[ 3.430627] usb 2-4: configuration #1 chosen from 1 choice
[ 3.441742] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/input/input5
[ 3.441799] generic-usb 0003:046D:C051.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-4/input0
[ 7.384109] usb-storage: device scan complete
[ 7.385733] scsi 5:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2
[ 7.386046] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 7.386971] sd 5:0:0:0: [sdb] 7892992 512-byte logical blocks: (4.04 GB/3.76 GiB)
[ 7.387594] sd 5:0:0:0: [sdb] Write Protect is off
[ 7.387596] sd 5:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 7.387598] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 7.390594] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 7.390596] sdb: sdb1
[ 7.395594] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 7.395597] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 8.248005] ata6: link is slow to respond, please be patient (ready=0)
[ 12.784006] ata6: SRST failed (errno=-16)
[ 18.292005] ata6: link is slow to respond, please be patient (ready=0)
[ 22.828007] ata6: SRST failed (errno=-16)
[ 28.336005] ata6: link is slow to respond, please be patient (ready=0)
[ 57.848007] ata6: SRST failed (errno=-16)
[ 57.848010] ata6: limiting SATA link speed to 1.5 Gbps
[ 62.852007] ata6: SRST failed (errno=-16)
[ 62.852009] ata6: reset failed, giving up
[ 63.164009] ata7: SATA link down (SStatus 0 SControl 300)
[ 63.180594] [drm] Initialized drm 1.1.0 20060810
[ 63.181889] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 63.181893] alloc irq_desc for 18 on node -1
[ 63.181895] alloc kstat_irqs on node -1
[ 63.181900] ohci1394 0000:03:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[ 63.204500] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 63.204504] nouveau 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 63.204510] nouveau 0000:01:00.0: setting latency timer to 64
[ 63.205902] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x092a80a2)
[ 63.206185] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 63.238530] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fdfff000-fdfff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 63.279470] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 63.279473] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 63.279475] [drm] nouveau 0000:01:00.0: Bios version 62.92.7d.00
[ 63.279478] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
[ 63.279481] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 63.279484] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 63.279486] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 63.279488] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[ 63.279491] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 63.279493] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff
[ 63.279495] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff
[ 63.279497] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
[ 63.279500] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
[ 63.279502] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[ 63.279504] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00020030
[ 63.279506] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
[ 63.279508] [drm] nouveau 0000:01:00.0: Raw DCB entry 5: 0000000e 00000000
[ 63.279515] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC601
[ 63.332620] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCBA9
[ 63.348504] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD987
[ 63.348512] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDA88
[ 63.356580] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDCF0
[ 63.356582] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xDD55
[ 63.380006] [drm] nouveau 0000:01:00.0: 0xDD55: Condition still not met after 20ms, skipping following opcodes
[ 63.380013] [drm] nouveau 0000:01:00.0: 0xB7C2: parsing output script 0
[ 63.380015] [drm] nouveau 0000:01:00.0: 0xB7C2: parsing output script 0
[ 63.380017] [drm] nouveau 0000:01:00.0: 0xA37C: parsing output script 0
[ 63.490572] [TTM] Zone kernel: Available graphics memory: 443528 kiB.
[ 63.490574] [TTM] Zone highmem: Available graphics memory: 512620 kiB.
[ 63.490581] [drm] nouveau 0000:01:00.0: 512 MiB VRAM
[ 63.501683] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 63.503008] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 63.505739] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 63.506124] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 63.506127] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 63.506129] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 63.506131] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 63.506133] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 63.506135] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 63.506173] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 63.690817] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40250000, bo f6bdd000
[ 63.690856] fb0: nouveaufb frame buffer device
[ 63.690858] registered panic notifier
[ 63.690861] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 63.692124] vga16fb: initializing
[ 63.692126] vga16fb: mapped to 0xc00a0000
[ 63.692129] vga16fb: not registering due to another framebuffer present
[ 63.697848] [drm] nouveau 0000:01:00.0: 0xB7C6: parsing output script 1
[ 63.697867] [drm] nouveau 0000:01:00.0: 0xB7C7: parsing output script 2
[ 63.697891] [drm] nouveau 0000:01:00.0: 0xB5FA: parsing clock script 0
[ 63.698353] Console: switching to colour frame buffer device 180x56
[ 63.944842] xor: automatically using best checksumming function: pIII_sse
[ 63.964502] pIII_sse : 9935.000 MB/sec
[ 63.964504] xor: using function: pIII_sse (9935.000 MB/sec)
[ 63.966434] device-mapper: dm-raid45: initialized v0.2594b
[ 64.512626] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800016b4e42]
[ 64.534982] aufs 2-standalone.tree-20091207
[ 64.545505] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 71.588009] udev: starting version 151
[ 71.781115] i2c i2c-2: nForce2 SMBus adapter at 0x1c00
[ 71.781132] i2c i2c-3: nForce2 SMBus adapter at 0x1c80
[ 71.888398] parport_pc 00:0a: reported by Plug and Play ACPI
[ 71.888425] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 71.954509] ppdev: user-space parallel port driver
[ 72.168907] eth0: no link during initialization.
[ 72.169298] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 72.273843] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 72.273848] HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
[ 72.273850] hda_intel: Disable MSI for Nvidia chipset
[ 72.273871] HDA Intel 0000:00:10.1: setting latency timer to 64
[ 72.304618] ata6: exception Emask 0x10 SAct 0x0 SErr 0x1850000 action 0xe frozen
[ 72.304623] ata6: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns }
[ 72.304630] ata6: hard resetting link
[ 72.608210] lp0: using parport0 (interrupt-driven).
[ 72.852088] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input6
[ 73.200388] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 73.200396] ata6: EH complete
[ 73.386866] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[ 73.391455] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
[ 73.944330] CPU0 attaching NULL sched-domain.
[ 73.944335] CPU1 attaching NULL sched-domain.
[ 73.959993] CPU0 attaching sched-domain:
[ 73.959996] domain 0: span 0-1 level MC
[ 73.959998] groups: 0 1
[ 73.960003] CPU1 attaching sched-domain:
[ 73.960004] domain 0: span 0-1 level MC
[ 73.960006] groups: 1 0
[ 91.887673] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 91.888772] SGI XFS Quota Management subsystem
[ 91.901232] JFS: nTxBlock = 8009, nTxLock = 64077
[ 91.917656] NTFS driver 2.1.29 [Flags: R/O MODULE].
[ 91.942988] QNX4 filesystem 0.2.3 registered.
[ 91.987382] Btrfs loaded
[ 109.832801] end_request: I/O error, dev fd0, sector 0
[ 122.009291] end_request: I/O error, dev fd0, sector 0
[ 430.528762] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 2
[ 431.495367] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[ 431.498280] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
[ 433.373483] CPU0 attaching NULL sched-domain.
[ 433.373487] CPU1 attaching NULL sched-domain.
[ 433.396554] CPU0 attaching sched-domain:
[ 433.396557] domain 0: span 0-1 level MC
[ 433.396559] groups: 0 1
[ 433.396564] CPU1 attaching sched-domain:
[ 433.396566] domain 0: span 0-1 level MC
[ 433.396568] groups: 1 0
[ 433.963695] bluetooth-apple[5030] general protection ip:980797 sp:bf81ebd0 error:0 in libglib-2.0.so.0.2400.1[942000+c8000]
[ 446.988012] ata1: lost interrupt (Status 0x50)
[ 477.004013] ata1: lost interrupt (Status 0x51)
[ 482.000520] ata1.00: qc timeout (cmd 0xa0)
[ 482.000528] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 482.000532] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[ 482.000541] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 482.000542] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 482.000544] ata1.00: status: { DRDY ERR }
[ 482.000563] ata1: soft resetting link
[ 482.156439] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 482.156879] ata1.00: configured for UDMA/33
[ 487.156014] ata1.00: qc timeout (cmd 0xa0)
[ 487.156018] ata1.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 487.156033] ata1: soft resetting link
[ 487.312433] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 487.312883] ata1.00: configured for UDMA/33
[ 492.312016] ata1.00: qc timeout (cmd 0xa0)
[ 492.312020] ata1.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 492.312023] ata1.00: limiting speed to UDMA/33:PIO3
[ 492.312039] ata1: soft resetting link
[ 492.468433] ata1: nv_mode_filter: 0x738f&0x739f->0x738f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 492.468882] ata1.00: configured for UDMA/33
[ 497.468018] ata1.00: qc timeout (cmd 0xa0)
[ 497.468023] ata1.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 497.468025] ata1.00: disabled
[ 497.468048] ata1: soft resetting link
[ 497.624053] ata1: EH complete
[ 692.106911] eth0: link up.
[ 692.107746] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 702.824508] eth0: no IPv6 routers present