rendered paste body[ 90.647]
X.Org X Server 1.9.5
Release Date: 2011-03-17
[ 90.684] X Protocol Version 11, Revision 0
[ 90.696] Build Operating System: Slackware 13.37 Slackware Linux Project
[ 90.708] Current Operating System: Linux slackhost 2.6.37.6 #3 SMP Sat Apr 9 22:49:32 CDT 2011 x86_64
[ 90.721] Kernel command line: BOOT_IMAGE=Linux ro root=803 vt.default_utf8=0
[ 90.734] Build Date: 17 March 2011 10:50:17PM
[ 90.747]
[ 90.759] Current version of pixman: 0.20.2
[ 90.771] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 90.796] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 90.835] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 6 21:08:52 2011
[ 90.974] (==) Using config file: "/etc/X11/xorg.conf"
[ 90.987] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 91.093] (==) ServerLayout "aticonfig Layout"
[ 91.093] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 91.093] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 91.093] (**) | |-->Device "aticonfig-Device[0]-0"
[ 91.093] (==) Automatically adding devices
[ 91.093] (==) Automatically enabling devices
[ 91.107] (WW) The directory "/usr/share/fonts/local" does not exist.
[ 91.107] Entry deleted from font path.
[ 91.107] (WW) The directory "/usr/share/fonts/CID" does not exist.
[ 91.107] Entry deleted from font path.
[ 91.186] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi/:unscaled,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic
[ 91.186] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 91.186] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 91.186] (II) Loader magic: 0x7d2500
[ 91.186] (II) Module ABI versions:
[ 91.186] X.Org ANSI C Emulation: 0.4
[ 91.186] X.Org Video Driver: 8.0
[ 91.186] X.Org XInput driver : 11.0
[ 91.186] X.Org Server Extension : 4.0
[ 91.187] (--) PCI:*(0:1:0:0) 1002:68c1:103c:1448 rev 0, Mem @ 0xc0000000/268435456, 0xd4000000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 91.187] (II) Open ACPI successful (/var/run/acpid.socket)
[ 91.187] (II) "extmod" will be loaded by default.
[ 91.187] (II) "dbe" will be loaded by default.
[ 91.187] (II) "glx" will be loaded by default.
[ 91.187] (II) "record" will be loaded by default.
[ 91.187] (II) "dri" will be loaded by default.
[ 91.187] (II) "dri2" will be loaded by default.
[ 91.187] (II) LoadModule: "extmod"
[ 91.334] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 91.350] (II) Module extmod: vendor="X.Org Foundation"
[ 91.350] compiled for 1.9.5, module version = 1.0.0
[ 91.350] Module class: X.Org Server Extension
[ 91.350] ABI class: X.Org Server Extension, version 4.0
[ 91.350] (II) Loading extension MIT-SCREEN-SAVER
[ 91.350] (II) Loading extension XFree86-VidModeExtension
[ 91.350] (II) Loading extension XFree86-DGA
[ 91.350] (II) Loading extension DPMS
[ 91.350] (II) Loading extension XVideo
[ 91.350] (II) Loading extension XVideo-MotionCompensation
[ 91.350] (II) Loading extension X-Resource
[ 91.350] (II) LoadModule: "dbe"
[ 91.351] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 91.352] (II) Module dbe: vendor="X.Org Foundation"
[ 91.352] compiled for 1.9.5, module version = 1.0.0
[ 91.352] Module class: X.Org Server Extension
[ 91.352] ABI class: X.Org Server Extension, version 4.0
[ 91.352] (II) Loading extension DOUBLE-BUFFER
[ 91.352] (II) LoadModule: "glx"
[ 91.352] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 91.375] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 91.376] compiled for 6.9.0, module version = 1.0.0
[ 91.376] (II) Loading extension GLX
[ 91.376] (II) LoadModule: "record"
[ 91.376] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 91.376] (II) Module record: vendor="X.Org Foundation"
[ 91.376] compiled for 1.9.5, module version = 1.13.0
[ 91.376] Module class: X.Org Server Extension
[ 91.376] ABI class: X.Org Server Extension, version 4.0
[ 91.376] (II) Loading extension RECORD
[ 91.376] (II) LoadModule: "dri"
[ 91.376] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 91.388] (II) Module dri: vendor="X.Org Foundation"
[ 91.388] compiled for 1.9.5, module version = 1.0.0
[ 91.388] ABI class: X.Org Server Extension, version 4.0
[ 91.388] (II) Loading extension XFree86-DRI
[ 91.388] (II) LoadModule: "dri2"
[ 91.388] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 91.388] (II) Module dri2: vendor="X.Org Foundation"
[ 91.388] compiled for 1.9.5, module version = 1.2.0
[ 91.388] ABI class: X.Org Server Extension, version 4.0
[ 91.388] (II) Loading extension DRI2
[ 91.388] (II) LoadModule: "fglrx"
[ 91.389] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 91.654] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 91.665] compiled for 1.4.99.906, module version = 8.84.5
[ 91.665] Module class: X.Org Video Driver
[ 91.665] (II) Loading sub module "fglrxdrm"
[ 91.665] (II) LoadModule: "fglrxdrm"
[ 91.665] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 91.694] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 91.694] compiled for 1.4.99.906, module version = 8.84.5
[ 91.694] (II) ATI Proprietary Linux Driver Version Identifier:8.84.5
[ 91.694] (II) ATI Proprietary Linux Driver Release Identifier: 8.841
[ 91.694] (II) ATI Proprietary Linux Driver Build Date: Apr 5 2011 21:43:54
[ 91.694] (--) using VT number 7
[ 91.739] (WW) Falling back to old probe method for fglrx
[ 91.820] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 91.842] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[ 91.847] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 91.847] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 91.847] (II) AMD Video driver is signed
[ 91.847] (II) fglrx(0): pEnt->device->identifier=0x7faf10
[ 91.847] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === begin
[ 91.847] (II) Loading sub module "vgahw"
[ 91.847] (II) LoadModule: "vgahw"
[ 91.861] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[ 91.867] (II) Module vgahw: vendor="X.Org Foundation"
[ 91.867] compiled for 1.9.5, module version = 0.1.0
[ 91.867] ABI class: X.Org Video Driver, version 8.0
[ 91.867] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 91.867] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 91.867] (==) fglrx(0): Default visual is TrueColor
[ 91.867] (**) fglrx(0): Option "DPMS" "true"
[ 91.867] (==) fglrx(0): RGB weight 888
[ 91.867] (II) fglrx(0): Using 8 bits per RGB
[ 91.867] (==) fglrx(0): Buffer Tiling is ON
[ 91.868] (II) Loading sub module "fglrxdrm"
[ 91.868] (II) LoadModule: "fglrxdrm"
[ 91.868] (II) Reloading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 91.871] ukiDynamicMajor: found major device number 244
[ 91.871] ukiDynamicMajor: found major device number 244
[ 91.871] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 91.871] ukiOpenDevice: node name is /dev/ati/card0
[ 91.871] ukiOpenDevice: open result is 13, (OK)
[ 91.871] ukiOpenByBusid: ukiOpenMinor returns 13
[ 91.871] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 91.871] (==) fglrx(0): NoAccel = NO
[ 91.871] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 91.871] (--) fglrx(0): Chipset: "AMD Radeon HD 6500M/5600/5700 Series" (Chipset = 0x68c1)
[ 91.871] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x1448)
[ 91.871] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 91.871] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 91.871] (--) fglrx(0): MMIO registers at 0xd4000000
[ 91.871] (--) fglrx(0): I/O port at 0x00004000
[ 91.871] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 91.949] (II) fglrx(0): ATIF platform detected
[ 91.951] (II) fglrx(0): AC Adapter is used
[ 91.972] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 91.973] (II) Loading sub module "vbe"
[ 91.973] (II) LoadModule: "vbe"
[ 91.974] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[ 91.984] (II) Module vbe: vendor="X.Org Foundation"
[ 91.984] compiled for 1.9.5, module version = 1.1.0
[ 91.984] ABI class: X.Org Video Driver, version 8.0
[ 91.984] (II) fglrx(0): VESA BIOS detected
[ 91.984] (II) fglrx(0): VESA VBE Version 3.0
[ 91.984] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 91.984] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 91.984] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[ 91.984] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 91.984] (II) fglrx(0): VESA VBE OEM Product: MADISON
[ 91.984] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 92.007] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 92.007] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 92.007] (II) fglrx(0): PCIE card detected
[ 92.007] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 92.007] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 92.009] (II) fglrx(0): Using adapter: 1:0.0.
[ 92.040] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 92.140] (II) fglrx(0): Interrupt handler installed at IRQ 49.
[ 92.140] (II) fglrx(0): RandR 1.2 support is enabled!
[ 92.140] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 92.140] (==) fglrx(0): Center Mode is disabled
[ 92.140] (II) Loading sub module "fb"
[ 92.140] (II) LoadModule: "fb"
[ 92.141] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 92.143] (II) Module fb: vendor="X.Org Foundation"
[ 92.143] compiled for 1.9.5, module version = 1.0.0
[ 92.143] ABI class: X.Org ANSI C Emulation, version 0.4
[ 92.143] (II) Loading sub module "ddc"
[ 92.143] (II) LoadModule: "ddc"
[ 92.143] (II) Module "ddc" already built-in
[ 92.282] (II) fglrx(0): Finished Initialize PPLIB!
[ 92.284] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 92.284] (II) fglrx(0): Output DFP1 has no monitor section
[ 92.284] (II) fglrx(0): Output CRT1 has no monitor section
[ 92.293] (II) Loading sub module "ddc"
[ 92.293] (II) LoadModule: "ddc"
[ 92.293] (II) Module "ddc" already built-in
[ 92.293] (II) fglrx(0): Connected Display0: LVDS
[ 92.293] (II) fglrx(0): Display0 EDID data ---------------------------
[ 92.293] (II) fglrx(0): Manufacturer: LGD Model: 2ac Serial#: 0
[ 92.293] (II) fglrx(0): Year: 2010 Week: 0
[ 92.293] (II) fglrx(0): EDID Version: 1.3
[ 92.293] (II) fglrx(0): Digital Display Input
[ 92.293] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 92.293] (II) fglrx(0): Gamma: 2.20
[ 92.293] (II) fglrx(0): No DPMS capabilities specified
[ 92.293] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 92.293] (II) fglrx(0): First detailed timing is preferred mode
[ 92.293] (II) fglrx(0): redX: 0.616 redY: 0.371 greenX: 0.355 greenY: 0.606
[ 92.293] (II) fglrx(0): blueX: 0.152 blueY: 0.100 whiteX: 0.313 whiteY: 0.329
[ 92.293] (II) fglrx(0): Manufacturer's mask: 0
[ 92.293] (II) fglrx(0): Supported detailed timing:
[ 92.293] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 92.293] (II) fglrx(0): h_active: 1366 h_sync: 1398 h_sync_end 1430 h_blank_end 1486 h_border: 0
[ 92.293] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 774 v_blanking: 782 v_border: 0
[ 92.293] (II) fglrx(0): LG Display
[ 92.293] (II) fglrx(0): LP156WH2-TLQB
[ 92.293] (II) fglrx(0): EDID (in hex):
[ 92.293] (II) fglrx(0): 00ffffffffffff0030e4ac0200000000
[ 92.293] (II) fglrx(0): 00140103802213780ac1259d5f5b9b27
[ 92.293] (II) fglrx(0): 19505400000001010101010101010101
[ 92.293] (II) fglrx(0): 010101010101121b567850000e302020
[ 92.293] (II) fglrx(0): 240058c2100000190000000000000000
[ 92.293] (II) fglrx(0): 00000000000000000000000000fe004c
[ 92.293] (II) fglrx(0): 4720446973706c61790a2020000000fe
[ 92.293] (II) fglrx(0): 004c503135365748322d544c514200c1
[ 92.293] (II) fglrx(0): End of Display0 EDID data --------------------
[ 92.297] (II) fglrx(0): EDID for output LVDS
[ 92.297] (II) fglrx(0): Manufacturer: LGD Model: 2ac Serial#: 0
[ 92.297] (II) fglrx(0): Year: 2010 Week: 0
[ 92.297] (II) fglrx(0): EDID Version: 1.3
[ 92.297] (II) fglrx(0): Digital Display Input
[ 92.297] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 92.297] (II) fglrx(0): Gamma: 2.20
[ 92.297] (II) fglrx(0): No DPMS capabilities specified
[ 92.297] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 92.297] (II) fglrx(0): First detailed timing is preferred mode
[ 92.297] (II) fglrx(0): redX: 0.616 redY: 0.371 greenX: 0.355 greenY: 0.606
[ 92.297] (II) fglrx(0): blueX: 0.152 blueY: 0.100 whiteX: 0.313 whiteY: 0.329
[ 92.297] (II) fglrx(0): Manufacturer's mask: 0
[ 92.297] (II) fglrx(0): Supported detailed timing:
[ 92.297] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 92.297] (II) fglrx(0): h_active: 1366 h_sync: 1398 h_sync_end 1430 h_blank_end 1486 h_border: 0
[ 92.297] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 774 v_blanking: 782 v_border: 0
[ 92.297] (II) fglrx(0): LG Display
[ 92.297] (II) fglrx(0): LP156WH2-TLQB
[ 92.297] (II) fglrx(0): EDID (in hex):
[ 92.297] (II) fglrx(0): 00000000000000003a20454449442028
[ 92.297] (II) fglrx(0): 696e20686578293a0a002020000a0027
[ 92.297] (II) fglrx(0): 19505400000001015100000000000000
[ 92.297] (II) fglrx(0): 00000000000000003a20466972737420
[ 92.297] (II) fglrx(0): 64657461696c65642074696d696e6720
[ 92.297] (II) fglrx(0): 697320707265666572726564206d6f64
[ 92.297] (II) fglrx(0): 650a000a00706c61790a2020000000fe
[ 92.297] (II) fglrx(0): 004c5031353657484100000000000000
[ 92.297] (II) fglrx(0): EDID vendor "LGD", prod id 684
[ 92.297] (II) fglrx(0): Printing DDC gathered Modelines:
[ 92.297] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)
[ 92.297] (II) fglrx(0): Printing probed modes for output LVDS
[ 92.297] (II) fglrx(0): Modeline "1366x768"x60.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)
[ 92.297] (II) fglrx(0): Modeline "1360x768"x60.0 69.30 1360 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)
[ 92.297] (II) fglrx(0): Modeline "1280x768"x60.0 69.30 1280 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)
[ 92.297] (II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1398 1430 1486 720 770 774 782 -hsync -vsync (46.6 kHz)
[ 92.297] (II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)
[ 92.297] (II) fglrx(0): Modeline "1024x600"x60.0 69.30 1024 1398 1430 1486 600 770 774 782 -hsync -vsync (46.6 kHz)
[ 92.297] (II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1398 1430 1486 600 770 774 782 -hsync -vsync (46.6 kHz)
[ 92.297] (II) fglrx(0): Modeline "800x480"x60.0 69.30 800 1398 1430 1486 480 770 774 782 -hsync -vsync (46.6 kHz)
[ 92.297] (II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1398 1430 1486 480 770 774 782 -hsync -vsync (46.6 kHz)
[ 92.297] (II) fglrx(0): EDID for output DFP1
[ 92.297] (II) fglrx(0): EDID for output CRT1
[ 92.297] (II) fglrx(0): Output LVDS connected
[ 92.297] (II) fglrx(0): Output DFP1 disconnected
[ 92.297] (II) fglrx(0): Output CRT1 disconnected
[ 92.297] (II) fglrx(0): Using exact sizes for initial modes
[ 92.297] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 92.297] (II) fglrx(0): Display dimensions: (340, 190) mm
[ 92.297] (II) fglrx(0): DPI set to (102, 102)
[ 92.297] (II) fglrx(0): Adapter AMD Radeon HD 6500M/5600/5700 Series has 2 configurable heads and 1 displays connected.
[ 92.297] (==) fglrx(0): PseudoColor visuals disabled
[ 92.298] (II) Loading sub module "ramdac"
[ 92.298] (II) LoadModule: "ramdac"
[ 92.298] (II) Module "ramdac" already built-in
[ 92.298] (==) fglrx(0): NoDRI = NO
[ 92.298] (==) fglrx(0): Capabilities: 0x00000000
[ 92.298] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 92.298] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 92.298] (==) fglrx(0): UseFastTLS=0
[ 92.298] (==) fglrx(0): BlockSignalsOnLock=1
[ 92.298] (II) fglrx(0): Desktop Vsync is enabled.
[ 92.298] (--) Depth 24 pixmap format is 32 bpp
[ 92.298] (II) Loading extension ATIFGLRXDRI
[ 92.298] (II) fglrx(0): doing swlDriScreenInit
[ 92.298] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 92.298] ukiDynamicMajor: found major device number 244
[ 92.298] ukiDynamicMajor: found major device number 244
[ 92.298] ukiDynamicMajor: found major device number 244
[ 92.298] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 92.298] ukiOpenDevice: node name is /dev/ati/card0
[ 92.298] ukiOpenDevice: open result is 18, (OK)
[ 92.298] ukiOpenByBusid: ukiOpenMinor returns 18
[ 92.298] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 92.298] (II) fglrx(0): [uki] DRM interface version 1.0
[ 92.298] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 92.298] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 92.298] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7ff603009000
[ 92.298] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 92.298] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 92.298] (II) fglrx(0): swlDriScreenInit done
[ 92.298] (II) fglrx(0): Kernel Module Version Information:
[ 92.298] (II) fglrx(0): Name: fglrx
[ 92.298] (II) fglrx(0): Version: 8.84.5
[ 92.298] (II) fglrx(0): Date: Apr 5 2011
[ 92.298] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 92.298] (II) fglrx(0): Kernel Module version matches driver.
[ 92.298] (II) fglrx(0): Kernel Module Build Time Information:
[ 92.298] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.37.6
[ 92.298] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 92.298] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 92.298] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 92.298] (II) fglrx(0): [uki] register handle = 0x00004000
[ 92.317] (II) fglrx(0): DRI initialization successfull
[ 92.317] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[ 92.338] (==) fglrx(0): Backing store disabled
[ 92.338] (II) Loading extension FGLRXEXTENSION
[ 92.338] (**) fglrx(0): DPMS enabled
[ 92.338] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 92.338] (**) fglrx(0): Textured Video is enabled.
[ 92.338] (II) LoadModule: "glesx"
[ 92.339] (II) Loading /usr/lib64/xorg/modules/glesx.so
[ 92.467] (II) Module glesx: vendor="X.Org Foundation"
[ 92.467] compiled for 1.4.99.906, module version = 1.0.0
[ 92.467] (II) Loading extension GLESX
[ 92.467] (II) fglrx(0): GLESX enableFlags = 592
[ 92.469] (II) fglrx(0): GLESX is enabled
[ 92.469] (II) LoadModule: "amdxmm"
[ 92.469] (II) Loading /usr/lib64/xorg/modules/amdxmm.so
[ 92.483] (II) Module amdxmm: vendor="X.Org Foundation"
[ 92.483] compiled for 1.4.99.906, module version = 2.0.0
[ 92.491] (II) Loading extension AMDXVOPL
[ 92.491] (II) Loading extension AMDXVBA
[ 92.504] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 92.505] (II) fglrx(0): Enable composite support successfully
[ 92.512] (WW) fglrx(0): Option "VendorName" is not used
[ 92.512] (WW) fglrx(0): Option "ModelName" is not used
[ 92.513] (II) fglrx(0): X context handle = 0x1
[ 92.513] (II) fglrx(0): [DRI] installation complete
[ 92.526] (==) fglrx(0): Silken mouse enabled
[ 92.539] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 92.539] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 92.539] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 92.539] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 93.676] (--) RandR disabled
[ 93.676] (II) Initializing built-in extension Generic Event Extension
[ 93.676] (II) Initializing built-in extension SHAPE
[ 93.676] (II) Initializing built-in extension MIT-SHM
[ 93.676] (II) Initializing built-in extension XInputExtension
[ 93.676] (II) Initializing built-in extension XTEST
[ 93.676] (II) Initializing built-in extension BIG-REQUESTS
[ 93.676] (II) Initializing built-in extension SYNC
[ 93.676] (II) Initializing built-in extension XKEYBOARD
[ 93.676] (II) Initializing built-in extension XC-MISC
[ 93.676] (II) Initializing built-in extension XINERAMA
[ 93.676] (II) Initializing built-in extension XFIXES
[ 93.676] (II) Initializing built-in extension RENDER
[ 93.676] (II) Initializing built-in extension RANDR
[ 93.676] (II) Initializing built-in extension COMPOSITE
[ 93.676] (II) Initializing built-in extension DAMAGE
[ 93.678] ukiDynamicMajor: found major device number 244
[ 93.678] ukiDynamicMajor: found major device number 244
[ 93.678] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 93.678] ukiOpenDevice: node name is /dev/ati/card0
[ 93.678] ukiOpenDevice: open result is 19, (OK)
[ 93.678] ukiOpenByBusid: ukiOpenMinor returns 19
[ 93.678] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 94.733] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 94.822] (II) fglrx(0): Enable the clock gating!
[ 94.834] (II) fglrx(0): Desktop Vsync is enabled.
[ 94.834] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 95.301] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 95.301] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 95.301] (**) Power Button: Applying InputClass "keyboard-all"
[ 95.301] (II) LoadModule: "evdev"
[ 95.301] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 95.313] (II) Module evdev: vendor="X.Org Foundation"
[ 95.313] compiled for 1.9.3, module version = 2.6.0
[ 95.313] Module class: X.Org XInput Driver
[ 95.313] ABI class: X.Org XInput driver, version 11.0
[ 95.313] (**) Power Button: always reports core events
[ 95.313] (**) Power Button: Device: "/dev/input/event5"
[ 95.317] (--) Power Button: Found keys
[ 95.317] (II) Power Button: Configuring as keyboard
[ 95.317] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 95.317] (**) Option "xkb_rules" "evdev"
[ 95.317] (**) Option "xkb_model" "evdev"
[ 95.317] (**) Option "xkb_layout" "us"
[ 95.317] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 95.413] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 95.413] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 95.413] (**) Video Bus: Applying InputClass "keyboard-all"
[ 95.413] (**) Video Bus: always reports core events
[ 95.413] (**) Video Bus: Device: "/dev/input/event8"
[ 95.419] (--) Video Bus: Found keys
[ 95.419] (II) Video Bus: Configuring as keyboard
[ 95.419] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 95.419] (**) Option "xkb_rules" "evdev"
[ 95.419] (**) Option "xkb_model" "evdev"
[ 95.419] (**) Option "xkb_layout" "us"
[ 95.419] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 95.426] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 95.426] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 95.426] (**) Power Button: Applying InputClass "keyboard-all"
[ 95.426] (**) Power Button: always reports core events
[ 95.426] (**) Power Button: Device: "/dev/input/event3"
[ 95.431] (--) Power Button: Found keys
[ 95.431] (II) Power Button: Configuring as keyboard
[ 95.431] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 95.431] (**) Option "xkb_rules" "evdev"
[ 95.431] (**) Option "xkb_model" "evdev"
[ 95.431] (**) Option "xkb_layout" "us"
[ 95.431] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 95.431] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 95.431] (II) No input driver/identifier specified (ignoring)
[ 95.435] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event2)
[ 95.435] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 95.435] (**) USB Optical Mouse: always reports core events
[ 95.435] (**) USB Optical Mouse: Device: "/dev/input/event2"
[ 95.443] (--) USB Optical Mouse: Found 3 mouse buttons
[ 95.443] (--) USB Optical Mouse: Found scroll wheel(s)
[ 95.443] (--) USB Optical Mouse: Found relative axes
[ 95.443] (--) USB Optical Mouse: Found x and y relative axes
[ 95.443] (II) USB Optical Mouse: Configuring as mouse
[ 95.443] (II) USB Optical Mouse: Adding scrollwheel support
[ 95.443] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 95.443] (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 95.443] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
[ 95.443] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 95.443] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 95.443] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 95.443] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 95.443] (II) USB Optical Mouse: initialized for relative axes.
[ 95.444] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 95.444] (II) No input driver/identifier specified (ignoring)
[ 95.446] (II) config/udev: Adding input device HDA Intel Mic at Ext Front Jack (/dev/input/event11)
[ 95.446] (II) No input driver/identifier specified (ignoring)
[ 95.446] (II) config/udev: Adding input device HDA Intel HP Out at Ext Front Jack (/dev/input/event12)
[ 95.446] (II) No input driver/identifier specified (ignoring)
[ 95.449] (II) config/udev: Adding input device HP Webcam (/dev/input/event10)
[ 95.449] (**) HP Webcam: Applying InputClass "evdev keyboard catchall"
[ 95.449] (**) HP Webcam: Applying InputClass "keyboard-all"
[ 95.449] (**) HP Webcam: always reports core events
[ 95.449] (**) HP Webcam: Device: "/dev/input/event10"
[ 95.455] (--) HP Webcam: Found keys
[ 95.455] (II) HP Webcam: Configuring as keyboard
[ 95.455] (II) XINPUT: Adding extended input device "HP Webcam" (type: KEYBOARD)
[ 95.455] (**) Option "xkb_rules" "evdev"
[ 95.455] (**) Option "xkb_model" "evdev"
[ 95.455] (**) Option "xkb_layout" "us"
[ 95.455] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 95.463] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 95.463] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 95.463] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
[ 95.463] (**) AT Translated Set 2 keyboard: always reports core events
[ 95.463] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 95.471] (--) AT Translated Set 2 keyboard: Found keys
[ 95.471] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 95.471] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 95.471] (**) Option "xkb_rules" "evdev"
[ 95.471] (**) Option "xkb_model" "evdev"
[ 95.471] (**) Option "xkb_layout" "us"
[ 95.471] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 95.472] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 95.472] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 95.472] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad"
[ 95.472] (II) LoadModule: "synaptics"
[ 95.472] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 95.486] (II) Module synaptics: vendor="X.Org Foundation"
[ 95.486] compiled for 1.9.4, module version = 1.4.0
[ 95.486] Module class: X.Org XInput Driver
[ 95.486] ABI class: X.Org XInput driver, version 11.0
[ 95.486] (**) Option "Device" "/dev/input/event9"
[ 95.523] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
[ 95.523] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4550
[ 95.523] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 95.523] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 95.523] (--) SynPS/2 Synaptics TouchPad: buttons: left
[ 95.523] (**) Option "TapButton1" "1"
[ 95.523] (**) Option "TapButton2" "2"
[ 95.523] (**) Option "TapButton3" "3"
[ 95.555] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 95.555] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 95.571] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 95.571] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 95.571] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 95.571] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 95.571] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 95.571] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 95.571] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 95.571] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 95.595] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 95.595] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 95.595] (II) No input driver/identifier specified (ignoring)
[ 95.595] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event7)
[ 95.595] (II) No input driver/identifier specified (ignoring)
[ 95.596] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 95.596] (II) No input driver/identifier specified (ignoring)
[ 95.602] (II) config/udev: Adding input device Speakup (/dev/input/event1)
[ 95.602] (**) Speakup: Applying InputClass "evdev keyboard catchall"
[ 95.602] (**) Speakup: Applying InputClass "keyboard-all"
[ 95.602] (**) Speakup: always reports core events
[ 95.602] (**) Speakup: Device: "/dev/input/event1"
[ 95.607] (--) Speakup: Found keys
[ 95.607] (II) Speakup: Configuring as keyboard
[ 95.607] (II) XINPUT: Adding extended input device "Speakup" (type: KEYBOARD)
[ 95.607] (**) Option "xkb_rules" "evdev"
[ 95.607] (**) Option "xkb_model" "evdev"
[ 95.607] (**) Option "xkb_layout" "us"
[ 95.607] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 95.607] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[ 95.607] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 95.607] (**) HP WMI hotkeys: Applying InputClass "keyboard-all"
[ 95.607] (**) HP WMI hotkeys: always reports core events
[ 95.607] (**) HP WMI hotkeys: Device: "/dev/input/event6"
[ 95.615] (--) HP WMI hotkeys: Found keys
[ 95.615] (II) HP WMI hotkeys: Configuring as keyboard
[ 95.615] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[ 95.615] (**) Option "xkb_rules" "evdev"
[ 95.615] (**) Option "xkb_model" "evdev"
[ 95.615] (**) Option "xkb_layout" "us"
[ 95.615] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 95.633] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 99.012] (II) fglrx(0): EDID vendor "LGD", prod id 684
[ 99.013] (II) fglrx(0): Printing DDC gathered Modelines:
[ 99.013] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)
[ 99.022] (II) fglrx(0): EDID vendor "LGD", prod id 684
[ 99.022] (II) fglrx(0): Printing DDC gathered Modelines:
[ 99.022] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)
[ 99.031] (II) fglrx(0): EDID vendor "LGD", prod id 684
[ 99.031] (II) fglrx(0): Printing DDC gathered Modelines:
[ 99.031] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)
[ 99.040] (II) fglrx(0): EDID vendor "LGD", prod id 684
[ 99.040] (II) fglrx(0): Printing DDC gathered Modelines:
[ 99.040] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)