rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-bpo.1-amd64 (Debian 2.6.30-6~bpo50+1) (nobse@debian.org) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Mon Aug 17 19:58:33 UTC 2009
[ 0.000000] Command line: root=/dev/mapper/system_volume-system_lv ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
[ 0.000000] BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff70000 (usable)
[ 0.000000] BIOS-e820: 000000007ff70000 - 000000007ff7e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff7e000 - 000000007ffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffd0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7ff70 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-000000007ff70000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007ff70000 page 4k
[ 0.000000] kernel direct mapping tables up to 7ff70000 @ 10000-14000
[ 0.000000] RAMDISK: 378a4000 - 37fefc3c
[ 0.000000] ACPI: RSDP 00000000000faff0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ff70000 00040 (v01 A_M_I_ OEMRSDT 03000904 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ff70200 00084 (v02 A_M_I_ OEMFACP 03000904 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ff70440 09720 (v01 A0993 A0993001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 000000007ff7e000 00040
[ 0.000000] ACPI: APIC 000000007ff70390 0006C (v01 A_M_I_ OEMAPIC 03000904 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ff70400 0003C (v01 A_M_I_ OEMMCFG 03000904 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007ff7e040 00089 (v01 A_M_I_ AMI_OEM 03000904 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007ff79b60 00038 (v01 A_M_I_ OEMHPET 03000904 MSFT 00000097)
[ 0.000000] ACPI: OSFR 000000007ff79ba0 000B0 (v01 A_M_I_ OEMOSFR 03000904 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000007ff7e4d0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007ff70000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007ff70000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000019fff]
[ 0.000000] bootmap [000000000001a000 - 0000000000029fef] pages 10
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007ff70000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS ==> [0000200000 - 00007d98cc]
[ 0.000000] #3 [00378a4000 - 0037fefc3c] RAMDISK ==> [00378a4000 - 0037fefc3c]
[ 0.000000] #4 [000009cc00 - 0000100000] BIOS reserved ==> [000009cc00 - 0000100000]
[ 0.000000] #5 [00007da000 - 00007da280] BRK ==> [00007da000 - 00007da280]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x0007ff70
[ 0.000000] On node 0 totalpages: 524028
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1601 pages reserved
[ 0.000000] DMA zone: 2323 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7111 pages used for memmap
[ 0.000000] DMA32 zone: 512937 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages at ffff880001010000, static data 76256 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515260
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/mapper/system_volume-system_lv ro
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1805.802 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 2053380k/2096576k available (2785k kernel code, 464k absent, 42732k reserved, 1398k data, 560k init)
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3611.60 BogoMIPS (lpj=7223208)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys devices
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU 0/0x0 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] CPU0: Thermal monitoring enabled (TM2)
[ 0.004000] using mwait in idle threads.
[ 0.004658] ACPI: Core revision 20090320
[ 0.024064] Setting APIC routing to flat
[ 0.024433] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071457] CPU0: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz stepping 02
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3611.74 BogoMIPS (lpj=7223489)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU 1/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.157451] CPU1: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz stepping 02
[ 0.158119] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160031] Brought up 2 CPUs
[ 0.160087] Total of 2 processors activated (7223.34 BogoMIPS).
[ 0.160211] CPU0 attaching sched-domain:
[ 0.160214] domain 0: span 0-1 level MC
[ 0.160217] groups: 0 1
[ 0.160223] CPU1 attaching sched-domain:
[ 0.160225] domain 0: span 0-1 level MC
[ 0.160228] groups: 1 0
[ 0.160297] net_namespace: 1936 bytes
[ 0.160297] Booting paravirtualized kernel on bare hardware
[ 0.160297] regulator: core version 0.5
[ 0.160297] NET: Registered protocol family 16
[ 0.160297] ACPI: bus type pci registered
[ 0.164014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.164077] PCI: Not using MMCONFIG.
[ 0.164134] PCI: Using configuration type 1 for base access
[ 0.164209] bio: create slab <bio-0> at 0
[ 0.164845] ACPI: EC: Look up EC in DSDT
[ 0.186157] ACPI: Interpreter enabled
[ 0.186214] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.186467] ACPI: Using IOAPIC for interrupt routing
[ 0.186598] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.190494] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.198534] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.209519] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 26, should be 1D [20090320]
[ 0.209519] ACPI: No dock devices found.
[ 0.209519] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.209519] pci 0000:00:1a.0: reg 20 io port: [0xc800-0xc81f]
[ 0.212055] pci 0000:00:1a.1: reg 20 io port: [0xc880-0xc89f]
[ 0.212126] pci 0000:00:1a.2: reg 20 io port: [0xcc00-0xcc1f]
[ 0.212201] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf7dffc00-0xf7dfffff]
[ 0.212256] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.212318] pci 0000:00:1a.7: PME# disabled
[ 0.212414] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7df8000-0xf7dfbfff]
[ 0.212457] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.212517] pci 0000:00:1b.0: PME# disabled
[ 0.212630] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.212690] pci 0000:00:1c.0: PME# disabled
[ 0.212807] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.212870] pci 0000:00:1c.4: PME# disabled
[ 0.212988] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.213051] pci 0000:00:1c.5: PME# disabled
[ 0.213163] pci 0000:00:1d.0: reg 20 io port: [0xc080-0xc09f]
[ 0.213234] pci 0000:00:1d.1: reg 20 io port: [0xc400-0xc41f]
[ 0.213305] pci 0000:00:1d.2: reg 20 io port: [0xc480-0xc49f]
[ 0.213379] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7dff800-0xf7dffbff]
[ 0.213435] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.213498] pci 0000:00:1d.7: PME# disabled
[ 0.213679] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.213758] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.213823] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.213903] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[ 0.216066] pci 0000:00:1f.2: reg 10 io port: [0xbc00-0xbc07]
[ 0.216073] pci 0000:00:1f.2: reg 14 io port: [0xb880-0xb883]
[ 0.216079] pci 0000:00:1f.2: reg 18 io port: [0xb800-0xb807]
[ 0.216085] pci 0000:00:1f.2: reg 1c io port: [0xb480-0xb483]
[ 0.216091] pci 0000:00:1f.2: reg 20 io port: [0xb400-0xb41f]
[ 0.216098] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7dfe800-0xf7dfefff]
[ 0.216130] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.220004] pci 0000:00:1f.2: PME# disabled
[ 0.220087] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7dff400-0xf7dff4ff]
[ 0.220102] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.220169] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf6f00000-0xf6ffffff]
[ 0.220218] pci 0000:02:00.0: reg 10 io port: [0xec00-0xec07]
[ 0.220226] pci 0000:02:00.0: reg 14 io port: [0xe880-0xe883]
[ 0.220235] pci 0000:02:00.0: reg 18 io port: [0xe800-0xe807]
[ 0.220243] pci 0000:02:00.0: reg 1c io port: [0xe480-0xe483]
[ 0.220252] pci 0000:02:00.0: reg 20 io port: [0xe400-0xe40f]
[ 0.220260] pci 0000:02:00.0: reg 24 32bit mmio: [0xf7fffc00-0xf7ffffff]
[ 0.220302] pci 0000:02:00.0: supports D1
[ 0.220304] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.220367] pci 0000:02:00.0: PME# disabled
[ 0.220472] pci 0000:00:1c.4: bridge io port: [0xe000-0xefff]
[ 0.220476] pci 0000:00:1c.4: bridge 32bit mmio: [0xf7f00000-0xf7ffffff]
[ 0.220535] pci 0000:01:00.0: reg 10 64bit mmio: [0xf7ec0000-0xf7efffff]
[ 0.220544] pci 0000:01:00.0: reg 18 io port: [0xdc00-0xdc7f]
[ 0.220603] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.220667] pci 0000:01:00.0: PME# disabled
[ 0.220774] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff]
[ 0.220779] pci 0000:00:1c.5: bridge 32bit mmio: [0xf7e00000-0xf7efffff]
[ 0.220808] pci 0000:04:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.220839] pci 0000:04:00.0: reg 30 32bit mmio: [0xfebf0000-0xfebfffff]
[ 0.220879] pci 0000:04:03.0: reg 10 32bit mmio: [0xfebef000-0xfebeffff]
[ 0.220925] pci 0000:04:03.0: supports D1 D2
[ 0.220928] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.220989] pci 0000:04:03.0: PME# disabled
[ 0.221087] pci 0000:00:1e.0: transparent bridge
[ 0.221147] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8000000-0xfebfffff]
[ 0.221175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.221381] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.221525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.221604] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.221700] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.244128] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.244750] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.245367] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.245984] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.246607] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.247307] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.248163] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.248782] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.249305] usbcore: registered new interface driver usbfs
[ 0.249305] usbcore: registered new interface driver hub
[ 0.249305] usbcore: registered new device driver usb
[ 0.249305] PCI: Using ACPI for IRQ routing
[ 0.256047] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.256296] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.272090] pnp: PnP ACPI init
[ 0.272157] ACPI: bus type pnp registered
[ 0.277534] pnp: PnP ACPI: found 18 devices
[ 0.277590] ACPI: ACPI bus type pnp unregistered
[ 0.277656] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.277727] system 00:07: ioport range 0x290-0x29f has been reserved
[ 0.277794] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.277858] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.277921] system 00:08: ioport range 0x500-0x57f could not be reserved
[ 0.277986] system 00:08: iomem range 0xfed08000-0xfed08fff has been reserved
[ 0.278051] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.278115] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.278179] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.278248] system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved
[ 0.278316] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.278397] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.278466] system 00:10: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.278533] system 00:11: iomem range 0x0-0x9ffff could not be reserved
[ 0.278596] system 00:11: iomem range 0xc0000-0xcffff has been reserved
[ 0.278660] system 00:11: iomem range 0xe0000-0xfffff could not be reserved
[ 0.278724] system 00:11: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.278807] system 00:11: iomem range 0xe0000000-0xffffffff could not be reserved
[ 0.283961] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.284020] pci 0000:00:1c.0: IO window: disabled
[ 0.284080] pci 0000:00:1c.0: MEM window: disabled
[ 0.284168] pci 0000:00:1c.0: PREFETCH window: 0x000000f6f00000-0x000000f6ffffff
[ 0.284248] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
[ 0.284308] pci 0000:00:1c.4: IO window: 0xe000-0xefff
[ 0.284371] pci 0000:00:1c.4: MEM window: 0xf7f00000-0xf7ffffff
[ 0.284434] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.284497] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:01
[ 0.284559] pci 0000:00:1c.5: IO window: 0xd000-0xdfff
[ 0.284622] pci 0000:00:1c.5: MEM window: 0xf7e00000-0xf7efffff
[ 0.284686] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.284751] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.284812] pci 0000:00:1e.0: IO window: disabled
[ 0.284875] pci 0000:00:1e.0: MEM window: 0xf8000000-0xfebfffff
[ 0.284940] pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x000000880fffff
[ 0.285030] alloc irq_desc for 17 on cpu 0 node 0
[ 0.285032] alloc kstat_irqs on cpu 0 node 0
[ 0.285039] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.285105] pci 0000:00:1c.0: setting latency timer to 64
[ 0.285113] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.285178] pci 0000:00:1c.4: setting latency timer to 64
[ 0.285185] alloc irq_desc for 16 on cpu 0 node 0
[ 0.285187] alloc kstat_irqs on cpu 0 node 0
[ 0.285191] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.285257] pci 0000:00:1c.5: setting latency timer to 64
[ 0.285264] pci 0000:00:1e.0: setting latency timer to 64
[ 0.285268] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.285271] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.285274] pci_bus 0000:03: resource 2 pref mem [0xf6f00000-0xf6ffffff]
[ 0.285277] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.285280] pci_bus 0000:02: resource 1 mem: [0xf7f00000-0xf7ffffff]
[ 0.285283] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.285285] pci_bus 0000:01: resource 1 mem: [0xf7e00000-0xf7efffff]
[ 0.285288] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xfebfffff]
[ 0.285291] pci_bus 0000:04: resource 2 pref mem [0x88000000-0x880fffff]
[ 0.285294] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.285296] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.285367] NET: Registered protocol family 2
[ 0.328729] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.329729] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.331819] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.332391] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.332453] TCP reno registered
[ 0.340788] NET: Registered protocol family 1
[ 0.340922] Trying to unpack rootfs image as initramfs...
[ 0.502868] Switched to high resolution mode on CPU 1
[ 0.504628] Switched to high resolution mode on CPU 0
[ 0.579730] Freeing initrd memory: 7471k freed
[ 0.584524] audit: initializing netlink socket (disabled)
[ 0.584604] type=2000 audit(1304596639.584:1): initialized
[ 0.584983] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.585172] VFS: Disk quotas dquot_6.5.2
[ 0.585263] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.585383] msgmni has been set to 4025
[ 0.585615] alg: No test for stdrng (krng)
[ 0.585746] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.585824] io scheduler noop registered
[ 0.585880] io scheduler anticipatory registered
[ 0.585937] io scheduler deadline registered
[ 0.586014] io scheduler cfq registered (default)
[ 0.586214] pci 0000:04:00.0: Boot video device
[ 0.586394] alloc irq_desc for 24 on cpu 0 node 0
[ 0.586397] alloc kstat_irqs on cpu 0 node 0
[ 0.586409] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.586424] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.586666] alloc irq_desc for 25 on cpu 0 node 0
[ 0.586669] alloc kstat_irqs on cpu 0 node 0
[ 0.586677] pcieport-driver 0000:00:1c.4: irq 25 for MSI/MSI-X
[ 0.586690] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.586934] alloc irq_desc for 26 on cpu 0 node 0
[ 0.586936] alloc kstat_irqs on cpu 0 node 0
[ 0.586944] pcieport-driver 0000:00:1c.5: irq 26 for MSI/MSI-X
[ 0.586957] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.591010] Linux agpgart interface v0.103
[ 0.591071] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.591260] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.591869] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.593876] brd: module loaded
[ 0.594004] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.594303] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.597107] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.597169] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.597375] mice: PS/2 mouse device common for all mice
[ 0.597499] rtc_cmos 00:03: RTC can wake from S4
[ 0.597620] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.597705] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.597806] cpuidle: using governor ladder
[ 0.597861] cpuidle: using governor menu
[ 0.597921] No iBFT detected.
[ 0.598315] TCP cubic registered
[ 0.598426] NET: Registered protocol family 10
[ 0.598946] lo: Disabled Privacy Extensions
[ 0.599279] Mobile IPv6
[ 0.599333] NET: Registered protocol family 17
[ 0.599550] registered taskstats version 1
[ 0.599764] rtc_cmos 00:03: setting system clock to 2011-05-05 11:57:20 UTC (1304596640)
[ 0.599896] Freeing unused kernel memory: 560k freed
[ 0.600183] Write protecting the kernel read-only data: 3796k
[ 0.654862] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.746314] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.756655] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.756733] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.756737] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.756927] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.757048] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
[ 0.757153] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.757216] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.757293] usb usb1: Product: UHCI Host Controller
[ 0.757352] usb usb1: Manufacturer: Linux 2.6.30-bpo.1-amd64 uhci_hcd
[ 0.757415] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.757529] usb usb1: configuration #1 chosen from 1 choice
[ 0.757625] hub 1-0:1.0: USB hub found
[ 0.757690] hub 1-0:1.0: 2 ports detected
[ 0.757928] alloc irq_desc for 21 on cpu 0 node 0
[ 0.757931] alloc kstat_irqs on cpu 0 node 0
[ 0.757939] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.758010] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.758013] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.758126] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 0.758239] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
[ 0.758338] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.758400] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.758480] usb usb2: Product: UHCI Host Controller
[ 0.758540] usb usb2: Manufacturer: Linux 2.6.30-bpo.1-amd64 uhci_hcd
[ 0.758603] usb usb2: SerialNumber: 0000:00:1a.1
[ 0.758717] usb usb2: configuration #1 chosen from 1 choice
[ 0.758806] hub 2-0:1.0: USB hub found
[ 0.758869] hub 2-0:1.0: 2 ports detected
[ 0.759078] alloc irq_desc for 18 on cpu 0 node 0
[ 0.759081] alloc kstat_irqs on cpu 0 node 0
[ 0.759087] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.759159] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.759162] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.759283] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 0.759395] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
[ 0.759493] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.759563] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.759642] usb usb3: Product: UHCI Host Controller
[ 0.759703] usb usb3: Manufacturer: Linux 2.6.30-bpo.1-amd64 uhci_hcd
[ 0.759767] usb usb3: SerialNumber: 0000:00:1a.2
[ 0.759884] usb usb3: configuration #1 chosen from 1 choice
[ 0.759975] hub 3-0:1.0: USB hub found
[ 0.760054] hub 3-0:1.0: 2 ports detected
[ 0.760261] alloc irq_desc for 23 on cpu 0 node 0
[ 0.760264] alloc kstat_irqs on cpu 0 node 0
[ 0.760271] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.760342] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.760346] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.760461] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.760580] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
[ 0.760677] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.760741] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.760818] usb usb4: Product: UHCI Host Controller
[ 0.760877] usb usb4: Manufacturer: Linux 2.6.30-bpo.1-amd64 uhci_hcd
[ 0.760938] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.766659] usb usb4: configuration #1 chosen from 1 choice
[ 0.766747] hub 4-0:1.0: USB hub found
[ 0.766808] hub 4-0:1.0: 2 ports detected
[ 0.808036] alloc irq_desc for 19 on cpu 0 node 0
[ 0.808040] alloc kstat_irqs on cpu 0 node 0
[ 0.808050] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.808123] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.808127] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.808287] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 0.808400] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
[ 0.808503] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.808569] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.808649] usb usb5: Product: UHCI Host Controller
[ 0.808710] usb usb5: Manufacturer: Linux 2.6.30-bpo.1-amd64 uhci_hcd
[ 0.808773] usb usb5: SerialNumber: 0000:00:1d.1
[ 0.808887] usb usb5: configuration #1 chosen from 1 choice
[ 0.808977] hub 5-0:1.0: USB hub found
[ 0.809037] hub 5-0:1.0: 2 ports detected
[ 0.866532] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.866596] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 0.867896] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.867973] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.867978] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.868148] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 0.868253] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
[ 0.868354] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.868417] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.868494] usb usb6: Product: UHCI Host Controller
[ 0.868552] usb usb6: Manufacturer: Linux 2.6.30-bpo.1-amd64 uhci_hcd
[ 0.868613] usb usb6: SerialNumber: 0000:00:1d.2
[ 0.868730] usb usb6: configuration #1 chosen from 1 choice
[ 0.868824] hub 6-0:1.0: USB hub found
[ 0.868886] hub 6-0:1.0: 2 ports detected
[ 0.879531] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.879618] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.879622] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.879792] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 0.883797] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.883865] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.883877] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7dffc00
[ 0.900076] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.900167] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.900227] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.900303] usb usb7: Product: EHCI Host Controller
[ 0.900359] usb usb7: Manufacturer: Linux 2.6.30-bpo.1-amd64 ehci_hcd
[ 0.900419] usb usb7: SerialNumber: 0000:00:1a.7
[ 0.900559] usb usb7: configuration #1 chosen from 1 choice
[ 0.900650] hub 7-0:1.0: USB hub found
[ 0.900710] hub 7-0:1.0: 6 ports detected
[ 0.900950] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.901033] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.901037] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.901162] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 0.905158] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.905224] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.905234] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7dff800
[ 0.929660] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.929756] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.929822] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.929903] usb usb8: Product: EHCI Host Controller
[ 0.929965] usb usb8: Manufacturer: Linux 2.6.30-bpo.1-amd64 ehci_hcd
[ 0.930028] usb usb8: SerialNumber: 0000:00:1d.7
[ 0.930164] usb usb8: configuration #1 chosen from 1 choice
[ 0.930260] hub 8-0:1.0: USB hub found
[ 0.930323] hub 8-0:1.0: 6 ports detected
[ 0.949015] Floppy drive(s): fd0 is 1.44M
[ 0.986941] Uniform Multi-Platform E-IDE driver
[ 0.999899] FDC 0 is a post-1991 82077
[ 1.055141] ATL1E 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.055221] ATL1E 0000:01:00.0: setting latency timer to 64
[ 1.074190] SCSI subsystem initialized
[ 1.147446] libata version 3.00 loaded.
[ 1.152069] ahci 0000:00:1f.2: version 3.0
[ 1.152088] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.152199] alloc irq_desc for 27 on cpu 0 node 0
[ 1.152201] alloc kstat_irqs on cpu 0 node 0
[ 1.152214] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 1.152268] ahci: SSS flag set, parallel bus scan disabled
[ 1.152365] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.152449] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems
[ 1.152533] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.157967] firewire_ohci 0000:04:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.158310] scsi0 : ahci
[ 1.158501] scsi1 : ahci
[ 1.158615] scsi2 : ahci
[ 1.158728] scsi3 : ahci
[ 1.158837] scsi4 : ahci
[ 1.158947] scsi5 : ahci
[ 1.159162] ata1: SATA max UDMA/133 abar m2048@0xf7dfe800 port 0xf7dfe900 irq 27
[ 1.159241] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27
[ 1.159320] ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27
[ 1.159399] ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27
[ 1.159478] ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
[ 1.159558] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
[ 1.232029] firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI version 1.0
[ 1.240564] usb 8-2: new high speed USB device using ehci_hcd and address 2
[ 1.374239] usb 8-2: New USB device found, idVendor=152d, idProduct=2338
[ 1.374307] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 1.374371] usb 8-2: Product: USB to ATA/ATAPI Bridge
[ 1.374432] usb 8-2: Manufacturer: JMicron
[ 1.374491] usb 8-2: SerialNumber: 500276821022
[ 1.374642] usb 8-2: configuration #1 chosen from 1 choice
[ 1.439905] Initializing USB Mass Storage driver...
[ 1.442123] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.442289] usbcore: registered new interface driver usb-storage
[ 1.442350] USB Mass Storage support registered.
[ 1.442413] usb-storage: device found at 2
[ 1.442415] usb-storage: waiting for device to settle before scanning
[ 1.644114] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.644854] ata1.00: ATA-8: WDC WD1001FALS-00U9B0, 05.00K05, max UDMA/133
[ 1.644920] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.645783] ata1.00: configured for UDMA/133
[ 1.660167] scsi 0:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[ 1.728113] firewire_core: created device fw0: GUID 001e8c0001df66d3, S400
[ 2.548034] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.548759] ata2.00: ATA-8: WDC WD1001FALS-00U9B0, 05.00K05, max UDMA/133
[ 2.548825] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.550404] ata2.00: configured for UDMA/133
[ 2.564138] scsi 1:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[ 3.452035] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.452764] ata3.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133
[ 3.452842] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.453709] ata3.00: configured for UDMA/133
[ 3.468125] scsi 2:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[ 4.356034] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.356762] ata4.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133
[ 4.356828] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 4.357703] ata4.00: configured for UDMA/133
[ 4.372126] scsi 3:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[ 5.260034] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.260762] ata5.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133
[ 5.260838] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.261699] ata5.00: configured for UDMA/133
[ 5.276126] scsi 4:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[ 6.164034] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.164763] ata6.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133
[ 6.164829] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.165699] ata6.00: configured for UDMA/133
[ 6.180134] scsi 5:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[ 6.192207] pata_marvell 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.192325] pata_marvell 0000:02:00.0: setting latency timer to 64
[ 6.192372] scsi7 : pata_marvell
[ 6.192508] scsi8 : pata_marvell
[ 6.192609] ata7: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[ 6.192672] ata8: PATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16
[ 6.440266] usb-storage: device scan complete
[ 6.442247] scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 0
[ 6.540753] ata8.00: ATA-8: WDC WD1001FALS-00U9B0, 05.00K05, max UDMA/133
[ 6.540824] ata8.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 6.556821] ata8.00: configured for UDMA/133
[ 6.557014] scsi 8:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[ 6.560774] Driver 'sd' needs updating - please use bus_type methods
[ 6.561015] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 6.561020] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 6.561037] sd 1:0:0:0: [sdb] Write Protect is off
[ 6.561039] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.561062] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.561164] sdb:<5>sd 0:0:0:0: [sda] Write Protect is off
[ 6.561425] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.561449] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.561627] sda:<5>sd 2:0:0:0: [sdc] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 6.562460] sd 2:0:0:0: [sdc] Write Protect is off
[ 6.562518] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 6.562542] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.562709] sdc:<5>sd 3:0:0:0: [sdd] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 6.562931] sd 3:0:0:0: [sdd] Write Protect is off
[ 6.562988] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 6.563012] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.563662] Driver 'sr' needs updating - please use bus_type methods
[ 6.569008] sdd:<5>sd 4:0:0:0: [sde] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 6.573498] sd 4:0:0:0: [sde] Write Protect is off
[ 6.573584] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 6.573610] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.573806] sde: sdd1 sdd2 sdd3 sdd4
[ 6.574531] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 6.574653] sd 5:0:0:0: [sdf] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 6.574749] sd 5:0:0:0: [sdf] Write Protect is off
[ 6.574808] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 6.574832] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.575000] sdf: sdb1 sdb2 sdb3 sdb4
[ 6.576461] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 6.576598] sd 8:0:0:0: [sdg] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 6.576692] sd 8:0:0:0: [sdg] Write Protect is off
[ 6.576752] sd 8:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[ 6.576777] sd 8:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.576964] sdg: sde1 sde2 sde3 sde4
[ 6.578487] sd 4:0:0:0: [sde] Attached SCSI disk
[ 6.578853] sda1 sda2 sda3 sda4
[ 6.579348] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.580704] sdc1 sdc2 sdc3 sdc4
[ 6.581244] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 6.589731] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.589815] Uniform CD-ROM driver Revision: 3.20
[ 6.589982] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 6.590877] sdg1 sdg2 sdg3 sdg4
[ 6.591497] sd 8:0:0:0: [sdg] Attached SCSI disk
[ 6.591628] sdf1 sdf2 sdf3 sdf4
[ 6.592181] sd 5:0:0:0: [sdf] Attached SCSI disk
[ 6.632328] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.632420] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 6.632509] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 6.632595] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 6.632681] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 6.632768] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 6.632858] sr 6:0:0:0: Attached scsi generic sg6 type 5
[ 6.632945] sd 8:0:0:0: Attached scsi generic sg7 type 0
[ 6.920121] xor: automatically using best checksumming function: generic_sse
[ 6.940004] generic_sse: 6635.000 MB/sec
[ 6.940065] xor: using function: generic_sse (6635.000 MB/sec)
[ 6.940848] async_tx: api initialized (async)
[ 7.008037] raid6: int64x1 1520 MB/s
[ 7.076006] raid6: int64x2 2049 MB/s
[ 7.144024] raid6: int64x4 1598 MB/s
[ 7.212008] raid6: int64x8 1363 MB/s
[ 7.280006] raid6: sse2x1 3214 MB/s
[ 7.348005] raid6: sse2x2 3459 MB/s
[ 7.416004] raid6: sse2x4 5433 MB/s
[ 7.416061] raid6: using algorithm sse2x4 (5433 MB/s)
[ 7.423223] md: raid6 personality registered for level 6
[ 7.423285] md: raid5 personality registered for level 5
[ 7.423342] md: raid4 personality registered for level 4
[ 7.437904] md: md6 stopped.
[ 7.653460] md: bind<sdb4>
[ 7.653652] md: bind<sdc4>
[ 7.653835] md: bind<sdd4>
[ 7.654020] md: bind<sde4>
[ 7.654220] md: bind<sdf4>
[ 7.654489] md: bind<sdg4>
[ 7.654680] md: bind<sda4>
[ 7.665906] raid5: device sda4 operational as raid disk 0
[ 7.665966] raid5: device sdg4 operational as raid disk 6
[ 7.666024] raid5: device sdf4 operational as raid disk 5
[ 7.666082] raid5: device sde4 operational as raid disk 4
[ 7.666140] raid5: device sdd4 operational as raid disk 3
[ 7.666197] raid5: device sdc4 operational as raid disk 2
[ 7.666255] raid5: device sdb4 operational as raid disk 1
[ 7.667063] raid5: allocated 8488kB for md127
[ 7.667150] raid5: raid level 6 set md127 active with 7 out of 8 devices, algorithm 2
[ 7.667226] RAID5 conf printout:
[ 7.667280] --- rd:8 wd:7
[ 7.667332] disk 0, o:1, dev:sda4
[ 7.667386] disk 1, o:1, dev:sdb4
[ 7.667440] disk 2, o:1, dev:sdc4
[ 7.667495] disk 3, o:1, dev:sdd4
[ 7.667553] disk 4, o:1, dev:sde4
[ 7.667607] disk 5, o:1, dev:sdf4
[ 7.667662] disk 6, o:1, dev:sdg4
[ 7.667997] md127: unknown partition table
[ 7.674525] md: bind<sdb3>
[ 7.674715] md: bind<sdc3>
[ 7.674892] md: bind<sdd3>
[ 7.675066] md: bind<sde3>
[ 7.675257] md: bind<sdf3>
[ 7.675524] md: bind<sdg3>
[ 7.675709] md: bind<sda3>
[ 7.686715] raid5: device sda3 operational as raid disk 0
[ 7.686780] raid5: device sdg3 operational as raid disk 6
[ 7.686843] raid5: device sdf3 operational as raid disk 5
[ 7.686904] raid5: device sde3 operational as raid disk 4
[ 7.686966] raid5: device sdd3 operational as raid disk 3
[ 7.687027] raid5: device sdc3 operational as raid disk 2
[ 7.687086] raid5: device sdb3 operational as raid disk 1
[ 7.687877] raid5: allocated 8488kB for md125
[ 7.687966] raid5: raid level 6 set md125 active with 7 out of 8 devices, algorithm 2
[ 7.688050] RAID5 conf printout:
[ 7.688106] --- rd:8 wd:7
[ 7.688161] disk 0, o:1, dev:sda3
[ 7.688217] disk 1, o:1, dev:sdb3
[ 7.688276] disk 2, o:1, dev:sdc3
[ 7.688331] disk 3, o:1, dev:sdd3
[ 7.688386] disk 4, o:1, dev:sde3
[ 7.688443] disk 5, o:1, dev:sdf3
[ 7.688499] disk 6, o:1, dev:sdg3
[ 7.688831] md125: unknown partition table
[ 7.694568] md: bind<sdb2>
[ 7.694808] md: bind<sdc2>
[ 7.695002] md: bind<sdd2>
[ 7.703052] md: bind<sde2>
[ 7.703265] md: bind<sdf2>
[ 7.703543] md: bind<sdg2>
[ 7.703777] md: bind<sda2>
[ 7.716927] md: raid1 personality registered for level 1
[ 7.717495] raid1: raid set md126 active with 7 out of 8 mirrors
[ 7.717831] md126: unknown partition table
[ 7.854433] device-mapper: uevent: version 1.0.3
[ 7.854923] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 8.030031] kjournald starting. Commit interval 5 seconds
[ 8.030040] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.768244] udevd version 125 started
[ 9.472110] ACPI: SSDT 000000007ff7e0d0 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 9.472635] processor ACPI_CPU:00: registered as cooling_device0
[ 9.473164] ACPI: SSDT 000000007ff7e2d0 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 9.473641] processor ACPI_CPU:01: registered as cooling_device1
[ 9.484722] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 9.484810] ACPI: Power Button [PWRF]
[ 9.484952] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 9.485033] ACPI: Power Button [PWRB]
[ 9.691703] alloc irq_desc for 22 on cpu 0 node 0
[ 9.691707] alloc kstat_irqs on cpu 0 node 0
[ 9.691716] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9.691842] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.881863] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[ 10.273377] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 10.453176] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 10.881274] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[ 11.998563] Adding 771080k swap on /dev/sda1. Priority:-1 extents:1 across:771080k
[ 12.012246] Adding 771080k swap on /dev/sdb1. Priority:-2 extents:1 across:771080k
[ 12.025212] Adding 771080k swap on /dev/sdc1. Priority:-3 extents:1 across:771080k
[ 12.051732] Adding 771080k swap on /dev/sdd1. Priority:-4 extents:1 across:771080k
[ 12.064176] Adding 771080k swap on /dev/sde1. Priority:-5 extents:1 across:771080k
[ 12.086242] Adding 771080k swap on /dev/sdf1. Priority:-6 extents:1 across:771080k
[ 12.457447] EXT3 FS on dm-0, internal journal
[ 13.054660] loop: module loaded
[ 13.183736] md: md6 stopped.
[ 50.480138] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 50.482071] SGI XFS Quota Management subsystem
[ 50.568315] XFS mounting filesystem dm-1
[ 50.700278] Ending clean XFS mount for filesystem: dm-1
[ 52.051712] alloc irq_desc for 28 on cpu 0 node 0
[ 52.051717] alloc kstat_irqs on cpu 0 node 0
[ 52.051740] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 52.052263] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 52.052915] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<1000 Mbps Full Duplex>
[ 52.053274] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 53.412259] lp: driver loaded but no devices found
[ 53.488759] ppdev: user-space parallel port driver
[ 62.336008] eth0: no IPv6 routers present
[ 84.437136] ioctl32(hddtemp:3442): Unknown cmd fd(3) cmd(0000031f){t:03;sz:0} arg(ff83630c) on /dev/sg0
[ 84.437229] ioctl32(hddtemp:3442): Unknown cmd fd(3) cmd(0000031f){t:03;sz:0} arg(ff83630c) on /dev/sg0
[ 84.505164] ioctl32(hddtemp:3448): Unknown cmd fd(3) cmd(0000031f){t:03;sz:0} arg(ff9b1aec) on /dev/sg1
[ 84.505256] ioctl32(hddtemp:3448): Unknown cmd fd(3) cmd(0000031f){t:03;sz:0} arg(ff9b1aec) on /dev/sg1
[ 84.568893] ioctl32(hddtemp:3454): Unknown cmd fd(3) cmd(0000031f){t:03;sz:0} arg(ff95becc) on /dev/sg2
[ 84.568986] ioctl32(hddtemp:3454): Unknown cmd fd(3) cmd(0000031f){t:03;sz:0} arg(ff95becc) on /dev/sg2
[ 84.635158] ioctl32(hddtemp:3460): Unknown cmd fd(3) cmd(0000031f){t:03;sz:0} arg(ff836e3c) on /dev/sg3
[ 84.635255] ioctl32(hddtemp:3460): Unknown cmd fd(3) cmd(0000031f){t:03;sz:0} arg(ff836e3c) on /dev/sg3
[ 84.703375] ioctl32(hddtemp:3466): Unknown cmd fd(3) cmd(0000031f){t:03;sz:0} arg(fffbf52c) on /dev/sg4
[ 84.703468] ioctl32(hddtemp:3466): Unknown cmd fd(3) cmd(0000031f){t:03;sz:0} arg(fffbf52c) on /dev/sg4
[ 84.764869] ioctl32(hddtemp:3472): Unknown cmd fd(3) cmd(0000031f){t:03;sz:0} arg(ffedb61c) on /dev/sg5
[ 84.764962] ioctl32(hddtemp:3472): Unknown cmd fd(3) cmd(0000031f){t:03;sz:0} arg(ffedb61c) on /dev/sg5
[ 84.828398] ioctl32(hddtemp:3478): Unknown cmd fd(3) cmd(0000030d){t:03;sz:0} arg(0804e3c0) on /dev/sg6
[ 84.841576] ioctl32(hddtemp:3484): Unknown cmd fd(3) cmd(0000031f){t:03;sz:0} arg(ffa05c7c) on /dev/sg7
[ 84.841671] ioctl32(hddtemp:3484): Unknown cmd fd(3) cmd(0000031f){t:03;sz:0} arg(ffa05c7c) on /dev/sg7
[ 85.696127] RPC: Registered udp transport module.
[ 85.696196] RPC: Registered tcp transport module.
[ 85.760353] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 85.818163] svc: failed to register lockdv1 RPC service (errno 97).
[ 85.819020] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 85.825234] NFSD: starting 90-second grace period
[ 86.576763] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 89.510254] NET: Registered protocol family 5
[ 234.145613] ioctl32(gnome-terminal:4194): Unknown cmd fd(21) cmd(0000530b){t:'S';sz:0} arg(f7d19c8a) on /dev/pts/2
[ 234.145624] ioctl32(gnome-terminal:4194): Unknown cmd fd(21) cmd(0000530b){t:'S';sz:0} arg(f7d19c8f) on /dev/pts/2
[ 234.145633] ioctl32(gnome-terminal:4194): Unknown cmd fd(21) cmd(0000530b){t:'S';sz:0} arg(f7d19c96) on /dev/pts/2