rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.34.1-10.xenlinux.qubes.x86_64 (geeko@buildhost) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #1 SMP Wed Jul 7 14:21:47 CEST 2010
[ 0.000000] Command line: ro root=/dev/mapper/vg_puppetmaster-lv_root rd_LUKS_UUID=luks-9d0b42e4-56cb-4cf9-9a0a-77eaba09c2b7 rd_LVM_LV=vg_puppetmaster/lv_root rd_LVM_LV=vg_puppetmaster/lv_swap rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet max_loop=255 radeon.modeset=1 VGA=345
[ 0.000000] Xen-provided machine memory map:
[ 0.000000] BIOS: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS: 0000000000100000 - 000000006ff90000 (usable)
[ 0.000000] BIOS: 000000006ff90000 - 000000006ffa8000 (ACPI data)
[ 0.000000] BIOS: 000000006ffa8000 - 000000006ffd0000 (ACPI NVS)
[ 0.000000] BIOS: 000000006ffd0000 - 0000000070000000 (reserved)
[ 0.000000] BIOS: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Xen-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000680cc000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x680cc max_arch_pfn = 0x80000000
[ 0.000000] initial memory mapped : 0 - 00000000
[ 0.000000] found SMP MP-table at [ffffffffff5fa780] 000ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000680cc000
[ 0.000000] 0000000000 - 00680cc000 page 4k
[ 0.000000] kernel direct mapping tables up to 680cc000 @ 35de000-3922000
[ 0.000000] RAMDISK: 008c5000 - 035be000
[ 0.000000] ACPI: RSDP 00000000000fb470 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 000000006ff90100 00054 (v01 112709 XSDT1602 20091127 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000006ff90290 000F4 (v03 112709 FACP1602 20091127 MSFT 00000097)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20100121/tbfadt-557)
[ 0.000000] ACPI: DSDT 000000006ff90450 0CDBC (v01 A1459 A1459001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 000000006ffa8000 00040
[ 0.000000] ACPI: APIC 000000006ff90390 0007C (v01 112709 APIC1602 20091127 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000006ff90410 0003C (v01 112709 OEMMCFG 20091127 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000006ffa8040 00072 (v01 112709 OEMB1602 20091127 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000006ff9f450 00038 (v01 112709 OEMHPET 20091127 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000006ff9f490 00544 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000678cc
[ 0.000000] 0: 0x000680cc -> 0x000680cc
[ 0.000000] On node 0 totalpages: 424140
[ 0.000000] free_area_init_node: node 0, pgdat ffffffff8075da40, node_mem_map ffff880004340000
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4040 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 5771 pages used for memmap
[ 0.000000] DMA32 zone: 414273 pages, LIFO batch:31
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] early_res array is doubled to 64 at [0 - 7ff]
[ 0.000000] Allocating PCI resources starting at 70000000 (gap: 70000000:8ec00000)
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 19 pages/cpu @ffff880003c78000 s46824 r8192 d22808 u77824
[ 0.000000] pcpu-alloc: s46824 r8192 d22808 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Swapping MFNs for PFN 776 and 3c7e (MFN 64776 and 67c7e)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 418313
[ 0.000000] Kernel command line: ro root=/dev/mapper/vg_puppetmaster-lv_root rd_LUKS_UUID=luks-9d0b42e4-56cb-4cf9-9a0a-77eaba09c2b7 rd_LVM_LV=vg_puppetmaster/lv_root rd_LVM_LV=vg_puppetmaster/lv_swap rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet max_loop=255 radeon.modeset=1 VGA=345
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Software IO TLB enabled:
[ 0.000000] Aperture: 8 megabytes
[ 0.000000] Address size: 24 bits
[ 0.000000] Kernel range: ffff880005a0e000 - ffff88000620e000
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Subtract (48 early reservations)
[ 0.000000] #1 [00008c5000 - 00035de000] Xen provided
[ 0.000000] #2 [0000002000 - 00008a4fe8] TEXT DATA BSS
[ 0.000000] #3 [00008a5000 - 00008a533c] BRK
[ 0.000000] #4 [00035de000 - 0003922000] PGTABLE
[ 0.000000] #5 [00678cc000 - 00680cc000] BALLOON
[ 0.000000] #6 [0004340000 - 0005a0e000] BOOTMEM
[ 0.000000] #7 [0003922000 - 0003922008] BOOTMEM
[ 0.000000] #8 [0003922040 - 00039221c0] BOOTMEM
[ 0.000000] #9 [00039221c0 - 0003922260] BOOTMEM
[ 0.000000] #10 [0003922280 - 000392e280] BOOTMEM
[ 0.000000] #11 [000392f000 - 0003930000] BOOTMEM
[ 0.000000] #12 [0003930000 - 0003931000] BOOTMEM
[ 0.000000] #13 [0003931000 - 0003932000] BOOTMEM
[ 0.000000] #14 [000392e280 - 000392e360] BOOTMEM
[ 0.000000] #15 [0003932000 - 0003c72660] BOOTMEM
[ 0.000000] #16 [0003c73000 - 0003c73018] BOOTMEM
[ 0.000000] #17 [000392e380 - 000392e390] BOOTMEM
[ 0.000000] #18 [0003c74000 - 0003c75000] BOOTMEM
[ 0.000000] #19 [0003c75000 - 0003c76000] BOOTMEM
[ 0.000000] #20 [000392e3c0 - 000392e5f0] BOOTMEM
[ 0.000000] #21 [000392e600 - 000392e668] BOOTMEM
[ 0.000000] #22 [000392e680 - 000392e6e8] BOOTMEM
[ 0.000000] #23 [000392e700 - 000392e768] BOOTMEM
[ 0.000000] #24 [000392e780 - 000392e7e8] BOOTMEM
[ 0.000000] #25 [000392e800 - 000392e868] BOOTMEM
[ 0.000000] #26 [000392e880 - 000392e8e8] BOOTMEM
[ 0.000000] #27 [000392e900 - 000392e968] BOOTMEM
[ 0.000000] #28 [000392e980 - 000392e9e8] BOOTMEM
[ 0.000000] #29 [000392ea00 - 000392ea68] BOOTMEM
[ 0.000000] #30 [000392ea80 - 000392eae8] BOOTMEM
[ 0.000000] #31 [000392eb00 - 000392ec21] BOOTMEM
[ 0.000000] #32 [000392ec40 - 000392ed61] BOOTMEM
[ 0.000000] #33 [0003c78000 - 0003cc4000] BOOTMEM
[ 0.000000] #34 [000392ed80 - 000392ed88] BOOTMEM
[ 0.000000] #35 [000392edc0 - 000392edc8] BOOTMEM
[ 0.000000] #36 [000392ee00 - 000392ee10] BOOTMEM
[ 0.000000] #37 [000392ee40 - 000392ee60] BOOTMEM
[ 0.000000] #38 [000392ee80 - 000392ef80] BOOTMEM
[ 0.000000] #39 [000392ef80 - 000392efc8] BOOTMEM
[ 0.000000] #40 [0003c72680 - 0003c726c8] BOOTMEM
[ 0.000000] #41 [0003cc4000 - 0003ccc000] BOOTMEM
[ 0.000000] #42 [0003ccc000 - 0003ecc000] BOOTMEM
[ 0.000000] #43 [0003ecc000 - 0003fcc000] BOOTMEM
[ 0.000000] #44 [0005a0e000 - 000620e000] BOOTMEM
[ 0.000000] #45 [0003fcc000 - 0003fd0000] BOOTMEM
[ 0.000000] #46 [0003fd0000 - 0003fd8000] BOOTMEM
[ 0.000000] #47 [0003fd8000 - 0003fe0000] BOOTMEM
[ 0.000000] Memory: 1599748k/1704752k available (4006k kernel code, 8192k absent, 96812k reserved, 3595k data, 356k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] nr_irqs_gsi=24 nr_pirqs=440
[ 0.000000] NR_IRQS:34880 nr_irqs:2552
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Xen reported: 2310.384 MHz processor.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [xvc-1] enabled
[ 0.000000] alloc irq_desc for 440 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.080011] Calibrating delay using timer specific routine.. 4624.14 BogoMIPS (lpj=9248280)
[ 0.080125] Mount-cache hash table entries: 256
[ 0.080260] Initializing cgroup subsys ns
[ 0.080263] Initializing cgroup subsys cpuacct
[ 0.080267] Initializing cgroup subsys memory
[ 0.080278] Initializing cgroup subsys devices
[ 0.080280] Initializing cgroup subsys freezer
[ 0.080282] Initializing cgroup subsys net_cls
[ 0.080284] Initializing cgroup subsys blkio
[ 0.080335] mce: CPU supports 6 MCE banks
[ 0.080374] SMP alternatives: switching to UP code
[ 0.102553] Unpacking initramfs...
[ 0.160050] Freeing initrd memory: 46052k freed
[ 0.185724] ACPI: Core revision 20100121
[ 0.208083] alloc irq_desc for 441 on node 0
[ 0.208085] alloc kstat_irqs on node 0
[ 0.208095] alloc irq_desc for 442 on node 0
[ 0.208096] alloc kstat_irqs on node 0
[ 0.208099] alloc irq_desc for 443 on node 0
[ 0.208100] alloc kstat_irqs on node 0
[ 0.208103] alloc irq_desc for 444 on node 0
[ 0.208105] alloc kstat_irqs on node 0
[ 0.208481] SMP alternatives: switching to SMP code
[ 0.230740] Brought up 4 CPUs
[ 0.230833] devtmpfs: initialized
[ 0.230833] regulator: core version 0.5
[ 0.230833] regulator: dummy:
[ 0.230833] Time: 5:06:09 Date: 05/04/11
[ 0.230833] NET: Registered protocol family 16
[ 0.230833] node 0 link 0: io port [1000, ffffff]
[ 0.230833] TOM: 0000000080000000 aka 2048M
[ 0.230833] Fam 10h mmconf [e0000000, efffffff]
[ 0.230833] node 0 link 0: mmio [a0000, bffff]
[ 0.230833] node 0 link 0: mmio [80000000, cfffffff]
[ 0.230833] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
[ 0.230833] node 0 link 0: mmio [f0000000, fe7fffff]
[ 0.230833] node 0 link 0: mmio [fe800000, fe9fffff]
[ 0.230833] node 0 link 0: mmio [fea00000, ffefffff]
[ 0.230833] bus: [00, 07] on node 0 link 0
[ 0.230833] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.230833] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.230833] bus: 00 index 2 [mem 0x80000000-0xdfffffff]
[ 0.230833] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff]
[ 0.230833] ACPI: bus type pci registered
[ 0.230833] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.230833] PCI: not using MMCONFIG
[ 0.230833] PCI: Using configuration type 1 for base access
[ 0.230833] PCI: Using configuration type 1 for extended access
[ 0.232174] bio: create slab <bio-0> at 0
[ 0.233549] ACPI: EC: Look up EC in DSDT
[ 0.237628] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.275354] ACPI: Interpreter enabled
[ 0.275361] ACPI: (supports S0 S1 S3 S5)
[ 0.275385] ACPI: Using IOAPIC for interrupt routing
[ 0.275455] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.279045] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.302246] ACPI: No dock devices found.
[ 0.302250] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.302427] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.302755] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.302757] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.302760] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.302762] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.302765] pci_root PNP0A03:00: host bridge window [mem 0x70000000-0xdfffffff]
[ 0.302767] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.302999] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.303004] pci 0000:00:0a.0: PME# disabled
[ 0.303068] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.303077] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.303086] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.303094] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.303103] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.303111] pci 0000:00:11.0: reg 24: [mem 0xfe7ffc00-0xfe7fffff]
[ 0.303137] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.303200] pci 0000:00:12.0: reg 10: [mem 0xfe7fe000-0xfe7fefff]
[ 0.303275] pci 0000:00:12.1: reg 10: [mem 0xfe7fd000-0xfe7fdfff]
[ 0.303365] pci 0000:00:12.2: reg 10: [mem 0xfe7ff800-0xfe7ff8ff]
[ 0.303437] pci 0000:00:12.2: supports D1 D2
[ 0.303439] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.303445] pci 0000:00:12.2: PME# disabled
[ 0.303487] pci 0000:00:13.0: reg 10: [mem 0xfe7fc000-0xfe7fcfff]
[ 0.303561] pci 0000:00:13.1: reg 10: [mem 0xfe7fb000-0xfe7fbfff]
[ 0.303652] pci 0000:00:13.2: reg 10: [mem 0xfe7ff400-0xfe7ff4ff]
[ 0.303724] pci 0000:00:13.2: supports D1 D2
[ 0.303726] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.303731] pci 0000:00:13.2: PME# disabled
[ 0.303882] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.303891] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.303899] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.303907] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.303916] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.304000] pci 0000:00:14.2: reg 10: [mem 0xfe7f4000-0xfe7f7fff 64bit]
[ 0.304062] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.304068] pci 0000:00:14.2: PME# disabled
[ 0.304212] pci 0000:00:14.5: reg 10: [mem 0xfe7fa000-0xfe7fafff]
[ 0.304534] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.304540] pci 0000:01:05.0: reg 14: [io 0xd000-0xd0ff]
[ 0.304546] pci 0000:01:05.0: reg 18: [mem 0xfe9f0000-0xfe9fffff]
[ 0.304559] pci 0000:01:05.0: reg 24: [mem 0xfe800000-0xfe8fffff]
[ 0.304582] pci 0000:01:05.0: supports D1 D2
[ 0.304613] pci 0000:01:05.1: reg 10: [mem 0xfe9e8000-0xfe9ebfff]
[ 0.304655] pci 0000:01:05.1: supports D1 D2
[ 0.304714] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.304720] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.304724] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.304730] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.304809] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.304830] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.304845] pci 0000:02:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.304853] pci 0000:02:00.0: reg 30: [mem 0xfeaf0000-0xfeafffff pref]
[ 0.304895] pci 0000:02:00.0: supports D1 D2
[ 0.304897] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.304902] pci 0000:02:00.0: PME# disabled
[ 0.312021] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.312027] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.312031] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.312037] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.312104] pci 0000:03:06.0: reg 10: [mem 0xfebff000-0xfebfffff]
[ 0.312183] pci 0000:03:06.0: supports D1 D2
[ 0.312184] pci 0000:03:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.312193] pci 0000:03:06.0: PME# disabled
[ 0.312241] pci 0000:03:06.1: reg 10: [mem 0xfebfe000-0xfebfefff]
[ 0.312319] pci 0000:03:06.1: supports D1 D2
[ 0.312321] pci 0000:03:06.1: PME# supported from D0 D1 D2 D3hot
[ 0.312327] pci 0000:03:06.1: PME# disabled
[ 0.312374] pci 0000:03:06.2: reg 10: [mem 0xfebfdc00-0xfebfdcff]
[ 0.312452] pci 0000:03:06.2: supports D1 D2
[ 0.312453] pci 0000:03:06.2: PME# supported from D0 D1 D2 D3hot
[ 0.312459] pci 0000:03:06.2: PME# disabled
[ 0.312537] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.312543] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.312549] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.312555] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.312558] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.312560] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.312562] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.312565] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.312567] pci 0000:00:14.4: bridge window [mem 0x70000000-0xdfffffff] (subtractive decode)
[ 0.312569] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.312588] pci_bus 0000:00: on NUMA node 0
[ 0.312594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.312800] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.312898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.312998] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.319605] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.319742] ACPI: PCI Interrupt Link [LNKB] (IRQs *4 7 10 11 12 14 15)
[ 0.319882] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.320028] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.320163] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 12 14 15)
[ 0.320296] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15)
[ 0.320435] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[ 0.320574] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.320659] xen_mem: Initialising balloon driver.
[ 0.320900] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.320904] vgaarb: loaded
[ 0.320959] PCI: Using ACPI for IRQ routing
[ 0.320959] PCI: pci_cache_line_size set to 64 bytes
[ 0.320959] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.320959] reserve RAM buffer: 000000006ff90000 - 000000006fffffff
[ 0.320959] Switching to clocksource xen
[ 0.321152] pnp: PnP ACPI init
[ 0.321176] ACPI: bus type pnp registered
[ 0.325148] pnp: PnP ACPI: found 13 devices
[ 0.325151] ACPI: ACPI bus type pnp unregistered
[ 0.325163] system 00:01: [mem 0x70000000-0x7fffffff] has been reserved
[ 0.325169] system 00:08: [mem 0xfec00000-0xfec00fff] has been reserved
[ 0.325172] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.325177] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.325179] system 00:09: [io 0x040b] has been reserved
[ 0.325181] system 00:09: [io 0x04d6] has been reserved
[ 0.325183] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.325185] system 00:09: [io 0x0c14] has been reserved
[ 0.325188] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 0.325190] system 00:09: [io 0x0c52] has been reserved
[ 0.325192] system 00:09: [io 0x0c6c] has been reserved
[ 0.325194] system 00:09: [io 0x0c6f] has been reserved
[ 0.325196] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.325198] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.325201] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.325203] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.325205] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.325207] system 00:09: [io 0x0b00-0x0b3f] has been reserved
[ 0.325210] system 00:09: [io 0x0800-0x089f] has been reserved
[ 0.325212] system 00:09: [io 0x0b00-0x0b0f] has been reserved
[ 0.325214] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.325217] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.325219] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.325221] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.325224] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.325227] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.325229] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.325233] system 00:0a: [io 0x0230-0x023f] has been reserved
[ 0.325235] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 0.325237] system 00:0a: [io 0x0300-0x030f] has been reserved
[ 0.325240] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
[ 0.325243] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.325249] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.325251] system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.325254] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.325256] system 00:0c: [mem 0x00100000-0x6fffffff] could not be reserved
[ 0.325259] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.325443] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.325447] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.325452] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.325456] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.325462] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.325465] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.325469] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.325473] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.325479] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.325481] pci 0000:00:14.4: bridge window [io disabled]
[ 0.325487] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.325492] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.325527] alloc irq_desc for 18 on node -1
[ 0.325529] alloc kstat_irqs on node -1
[ 0.325542] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.325546] pci 0000:00:0a.0: setting latency timer to 64
[ 0.325556] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.325559] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.325561] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.325563] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.325565] pci_bus 0000:00: resource 8 [mem 0x70000000-0xdfffffff]
[ 0.325567] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.325569] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.325571] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff]
[ 0.325574] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.325576] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.325578] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.325580] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.325582] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.325584] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.325586] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.325593] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.325595] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.325597] pci_bus 0000:03: resource 8 [mem 0x70000000-0xdfffffff]
[ 0.325599] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.325692] NET: Registered protocol family 2
[ 0.325778] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.326299] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.328485] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.329039] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.329042] TCP reno registered
[ 0.329046] UDP hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.329083] UDP-Lite hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.329297] NET: Registered protocol family 1
[ 0.329340] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.460054] pci 0000:01:05.0: Boot video device
[ 0.460155] PCI: CLS 64 bytes, default 64
[ 0.460511] MCE: bind virq for DOM0 logging
[ 0.460531] alloc irq_desc for 445 on node 0
[ 0.460533] alloc kstat_irqs on node 0
[ 0.460555] MCE_DOM0_LOG: enter dom0 mce vIRQ handler
[ 0.460558] MCE_DOM0_LOG: No more urgent data
[ 0.460560] MCE_DOM0_LOG: No more nonurgent data
[ 0.460819] audit: initializing netlink socket (disabled)
[ 0.460834] type=2000 audit(1304485569.812:1): initialized
[ 0.489328] VFS: Disk quotas dquot_6.5.2
[ 0.489368] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.489578] msgmni has been set to 828
[ 0.489831] alg: No test for stdrng (krng)
[ 0.489873] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.489878] io scheduler noop registered
[ 0.489879] io scheduler deadline registered
[ 0.489909] io scheduler cfq registered (default)
[ 0.490074] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.490133] alloc irq_desc for 439 on node 0
[ 0.490134] alloc kstat_irqs on node 0
[ 0.490139] pcieport 0000:00:0a.0: irq 439 (279) for MSI/MSI-X
[ 0.490218] pcieport 0000:00:0a.0: Requesting control of PCIe PME from ACPI BIOS
[ 0.490233] pcieport 0000:00:0a.0: Failed to receive control of PCIe PME service: no _OSC support
[ 0.490236] pcie_pme: probe of 0000:00:0a.0:pcie01 failed with error -13
[ 0.490251] pci-stub: invalid id string ""
[ 0.491257] Non-volatile memory driver v1.3
[ 0.509964] loop: module loaded
[ 0.510028] alloc irq_desc for 446 on node 0
[ 0.510030] alloc kstat_irqs on node 0
[ 0.510055] Xen virtual console successfully installed as xvc0
[ 0.510090] Fixed MDIO Bus: probed
[ 0.510135] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.510137] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.510293] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.510400] mice: PS/2 mouse device common for all mice
[ 0.510529] rtc_cmos 00:03: RTC can wake from S4
[ 0.510568] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.510602] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.510717] device-mapper: uevent: version 1.0.3
[ 0.510820] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.511128] TCP cubic registered
[ 0.511223] NET: Registered protocol family 10
[ 0.511657] lo: Disabled Privacy Extensions
[ 0.511960] registered taskstats version 1
[ 0.512304] PCI IO multiplexer device installed.
[ 0.512318] Magic number: 11:883:111
[ 0.512515] rtc_cmos 00:03: setting system clock to 2011-05-04 05:06:09 UTC (1304485569)
[ 0.512708] Freeing unused kernel memory: 356k freed
[ 0.512955] Write protecting the kernel read-only data: 7236k
[ 0.535733] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.543024] dracut: dracut-006-6.fc14
[ 0.568777] udev[85]: starting version 161
[ 0.681902] dracut: Starting plymouth daemon
[ 0.705053] dracut: rd_NO_DM: removing DM RAID activation
[ 0.708394] dracut: rd_NO_MD: removing MD RAID activation
[ 0.773805] SCSI subsystem initialized
[ 0.847036] usbcore: registered new interface driver usbfs
[ 0.847072] usbcore: registered new interface driver hub
[ 0.847144] usbcore: registered new device driver usb
[ 0.860918] libata version 3.00 loaded.
[ 0.861692] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.861747] ACPI: Power Button [PWRB]
[ 0.861793] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.861812] ACPI: Power Button [PWRF]
[ 0.863583] alloc irq_desc for 16 on node -1
[ 0.863586] alloc kstat_irqs on node -1
[ 0.863600] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.863638] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 0.863787] scsi0 : pata_atiixp
[ 0.863944] scsi1 : pata_atiixp
[ 0.865052] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.865301] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 0.865305] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 0.865368] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.865407] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.865441] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 0.865511] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe7fe000
[ 0.873459] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.873462] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 0.928106] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.928113] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.928116] usb usb1: Product: OHCI Host Controller
[ 0.928118] usb usb1: Manufacturer: Linux 2.6.34.1-10.xenlinux.qubes.x86_64 ohci_hcd
[ 0.928120] usb usb1: SerialNumber: 0000:00:12.0
[ 0.928638] hub 1-0:1.0: USB hub found
[ 0.928646] hub 1-0:1.0: 3 ports detected
[ 0.928784] ahci 0000:00:11.0: version 3.0
[ 0.928821] alloc irq_desc for 22 on node -1
[ 0.928825] alloc kstat_irqs on node -1
[ 0.928842] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.929008] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.929013] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.042857] scsi2 : ahci
[ 1.061326] ata1.00: ATAPI: HP DVD Writer 740r, LP83, max UDMA/66
[ 1.063059] ata1.01: ATA-7: Maxtor 6L160P0, BAJ41G20, max UDMA/133
[ 1.063065] ata1.01: 320173056 sectors, multi 16: LBA48
[ 1.069723] scsi3 : ahci
[ 1.071111] scsi4 : ahci
[ 1.071194] scsi5 : ahci
[ 1.071348] ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 22
[ 1.071352] ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 22
[ 1.071355] ata5: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 22
[ 1.071359] ata6: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 22
[ 1.071467] alloc irq_desc for 17 on node -1
[ 1.071469] alloc kstat_irqs on node -1
[ 1.071482] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.071522] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.071539] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 2
[ 1.071617] ehci_hcd 0000:00:12.2: debug port 1
[ 1.071664] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff800
[ 1.084575] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.084623] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.084626] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.084628] usb usb2: Product: EHCI Host Controller
[ 1.084630] usb usb2: Manufacturer: Linux 2.6.34.1-10.xenlinux.qubes.x86_64 ehci_hcd
[ 1.084632] usb usb2: SerialNumber: 0000:00:12.2
[ 1.084772] hub 2-0:1.0: USB hub found
[ 1.084778] hub 2-0:1.0: 6 ports detected
[ 1.084950] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.084998] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.085022] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 3
[ 1.085082] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe7fd000
[ 1.088501] ata1.00: configured for UDMA/66
[ 1.106177] ata1.01: configured for UDMA/100
[ 1.107749] scsi 0:0:0:0: CD-ROM HP DVD Writer 740r LP83 PQ: 0 ANSI: 5
[ 1.107936] scsi 0:0:1:0: Direct-Access ATA Maxtor 6L160P0 BAJ4 PQ: 0 ANSI: 5
[ 1.144051] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.144054] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.144056] usb usb3: Product: OHCI Host Controller
[ 1.144058] usb usb3: Manufacturer: Linux 2.6.34.1-10.xenlinux.qubes.x86_64 ohci_hcd
[ 1.144060] usb usb3: SerialNumber: 0000:00:12.1
[ 1.144148] hub 3-0:1.0: USB hub found
[ 1.144155] hub 3-0:1.0: 3 ports detected
[ 1.144281] alloc irq_desc for 19 on node -1
[ 1.144285] alloc kstat_irqs on node -1
[ 1.144300] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.144339] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.144357] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.144418] ehci_hcd 0000:00:13.2: debug port 1
[ 1.144460] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe7ff400
[ 1.156526] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.156549] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.156552] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.156554] usb usb4: Product: EHCI Host Controller
[ 1.156555] usb usb4: Manufacturer: Linux 2.6.34.1-10.xenlinux.qubes.x86_64 ehci_hcd
[ 1.156557] usb usb4: SerialNumber: 0000:00:13.2
[ 1.156668] hub 4-0:1.0: USB hub found
[ 1.156672] hub 4-0:1.0: 6 ports detected
[ 1.156768] ehci_hcd 0000:03:06.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.156787] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.156792] ehci_hcd 0000:03:06.2: EHCI Host Controller
[ 1.156802] ehci_hcd 0000:03:06.2: new USB bus registered, assigned bus number 5
[ 1.156829] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.156843] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 1.156911] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7fc000
[ 1.180561] ehci_hcd 0000:03:06.2: irq 22, io mem 0xfebfdc00
[ 1.192531] ehci_hcd 0000:03:06.2: USB 2.0 started, EHCI 1.00
[ 1.192549] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.192551] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.192553] usb usb5: Product: EHCI Host Controller
[ 1.192555] usb usb5: Manufacturer: Linux 2.6.34.1-10.xenlinux.qubes.x86_64 ehci_hcd
[ 1.192557] usb usb5: SerialNumber: 0000:03:06.2
[ 1.192650] hub 5-0:1.0: USB hub found
[ 1.192654] hub 5-0:1.0: 5 ports detected
[ 1.220036] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.220039] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.220041] usb usb6: Product: OHCI Host Controller
[ 1.220043] usb usb6: Manufacturer: Linux 2.6.34.1-10.xenlinux.qubes.x86_64 ohci_hcd
[ 1.220044] usb usb6: SerialNumber: 0000:00:13.0
[ 1.220134] hub 6-0:1.0: USB hub found
[ 1.220140] hub 6-0:1.0: 3 ports detected
[ 1.220216] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.220237] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.220246] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 7
[ 1.220272] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe7fb000
[ 1.280046] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.280049] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.280051] usb usb7: Product: OHCI Host Controller
[ 1.280053] usb usb7: Manufacturer: Linux 2.6.34.1-10.xenlinux.qubes.x86_64 ohci_hcd
[ 1.280055] usb usb7: SerialNumber: 0000:00:13.1
[ 1.280144] hub 7-0:1.0: USB hub found
[ 1.280150] hub 7-0:1.0: 3 ports detected
[ 1.280222] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.280251] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.280259] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 1.280285] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7fa000
[ 1.340042] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.340045] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.340047] usb usb8: Product: OHCI Host Controller
[ 1.340049] usb usb8: Manufacturer: Linux 2.6.34.1-10.xenlinux.qubes.x86_64 ohci_hcd
[ 1.340051] usb usb8: SerialNumber: 0000:00:14.5
[ 1.340145] hub 8-0:1.0: USB hub found
[ 1.340151] hub 8-0:1.0: 2 ports detected
[ 1.340231] alloc irq_desc for 20 on node -1
[ 1.340233] alloc kstat_irqs on node -1
[ 1.340243] ohci_hcd 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.340271] ohci_hcd 0000:03:06.0: OHCI Host Controller
[ 1.340280] ohci_hcd 0000:03:06.0: new USB bus registered, assigned bus number 9
[ 1.340319] ohci_hcd 0000:03:06.0: irq 20, io mem 0xfebff000
[ 1.388054] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.388129] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.425844] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.425846] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.425849] usb usb9: Product: OHCI Host Controller
[ 1.425850] usb usb9: Manufacturer: Linux 2.6.34.1-10.xenlinux.qubes.x86_64 ohci_hcd
[ 1.425852] usb usb9: SerialNumber: 0000:03:06.0
[ 1.425947] hub 9-0:1.0: USB hub found
[ 1.425953] hub 9-0:1.0: 3 ports detected
[ 1.426040] alloc irq_desc for 21 on node -1
[ 1.426042] alloc kstat_irqs on node -1
[ 1.426050] ohci_hcd 0000:03:06.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.426074] ohci_hcd 0000:03:06.1: OHCI Host Controller
[ 1.426084] ohci_hcd 0000:03:06.1: new USB bus registered, assigned bus number 10
[ 1.426117] ohci_hcd 0000:03:06.1: irq 21, io mem 0xfebfe000
[ 1.509842] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.509845] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.509847] usb usb10: Product: OHCI Host Controller
[ 1.509848] usb usb10: Manufacturer: Linux 2.6.34.1-10.xenlinux.qubes.x86_64 ohci_hcd
[ 1.509850] usb usb10: SerialNumber: 0000:03:06.1
[ 1.509946] hub 10-0:1.0: USB hub found
[ 1.509953] hub 10-0:1.0: 2 ports detected
[ 1.552539] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.552566] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.553057] ata5.00: ATA-7: WDC WD800BD-22LRA0, 06.01D06, max UDMA/133
[ 1.553062] ata5.00: 156301488 sectors, multi 16: LBA48
[ 1.553608] ata5.00: configured for UDMA/133
[ 1.554030] ata4.00: ATA-8: ST3500320AS, SD81, max UDMA/133
[ 1.554032] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.555900] ata4.00: configured for UDMA/133
[ 1.568421] scsi 3:0:0:0: Direct-Access ATA ST3500320AS SD81 PQ: 0 ANSI: 5
[ 1.568706] scsi 4:0:0:0: Direct-Access ATA WDC WD800BD-22LR 06.0 PQ: 0 ANSI: 5
[ 1.580947] sd 0:0:1:0: [sda] 320173056 512-byte logical blocks: (163 GB/152 GiB)
[ 1.580996] sd 0:0:1:0: [sda] Write Protect is off
[ 1.580999] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.581087] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.581383] sda:
[ 1.581654] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.581718] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.581721] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.581738] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.581878] sdb:
[ 1.581896] sd 4:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.581952] sd 4:0:0:0: [sdc] Write Protect is off
[ 1.581955] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.581972] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.582277] sdc: sdb1
[ 1.589961] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.592163] sdc1 sdc2
[ 1.598311] sda1 sda2
[ 1.599480] sd 0:0:1:0: [sda] Attached SCSI disk
[ 1.605039] usb 1-3: new low speed USB device using ohci_hcd and address 2
[ 1.609137] sdc2: <bsd: sdc5 sdc6 sdc7 sdc8 sdc9 >
[ 1.610208] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 1.659208] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.659213] Uniform CD-ROM driver Revision: 3.20
[ 1.659519] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.780103] usb 1-3: New USB device found, idVendor=045e, idProduct=0047
[ 1.780106] usb 1-3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 1.780109] usb 1-3: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 1.780111] usb 1-3: Manufacturer: Microsoft
[ 1.796828] usbcore: registered new interface driver hiddev
[ 1.801393] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/input/input3
[ 1.801479] generic-usb 0003:045E:0047.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:12.0-3/input0
[ 1.801506] usbcore: registered new interface driver usbhid
[ 1.801508] usbhid: USB HID core driver
[ 1.866589] dracut: luksOpen /dev/sda2 luks-9d0b42e4-56cb-4cf9-9a0a-77eaba09c2b7
[ 1.896033] usb 5-1: new high speed USB device using ehci_hcd and address 2
[ 2.027297] usb 5-1: New USB device found, idVendor=0930, idProduct=6545
[ 2.027300] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.027302] usb 5-1: Product: USB Flash Memory
[ 2.027304] usb 5-1: Manufacturer:
[ 2.027305] usb 5-1: SerialNumber: 001D92A85D0AB911434F040B
[ 2.036833] Initializing USB Mass Storage driver...
[ 2.037262] scsi6 : usb-storage 5-1:1.0
[ 2.037418] usbcore: registered new interface driver usb-storage
[ 2.037420] USB Mass Storage support registered.
[ 2.140029] usb 5-2: new high speed USB device using ehci_hcd and address 3
[ 2.277512] usb 5-2: New USB device found, idVendor=1710, idProduct=0303
[ 2.277515] usb 5-2: New USB device strings: Mfr=56, Product=73, SerialNumber=95
[ 2.277517] usb 5-2: Product: USB2.0 Storage Device
[ 2.277519] usb 5-2: Manufacturer: AZiO Corporation
[ 2.277521] usb 5-2: SerialNumber: DEF10B8FB1B6
[ 2.278163] scsi7 : usb-storage 5-2:1.0
[ 2.389035] usb 5-5: new high speed USB device using ehci_hcd and address 4
[ 2.521623] usb 5-5: New USB device found, idVendor=0781, idProduct=5150
[ 2.521626] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.521628] usb 5-5: Product: Cruzer Mini
[ 2.521630] usb 5-5: Manufacturer: SanDisk Corporation
[ 2.521632] usb 5-5: SerialNumber: SNDK2FA3550C76A08602
[ 2.522342] scsi8 : usb-storage 5-5:1.0
[ 3.074011] scsi 6:0:0:0: Direct-Access USB Flash Memory PMAP PQ: 0 ANSI: 0 CCS
[ 3.279732] scsi 7:0:0:0: Direct-Access Maxtor 6 B250R0 0000 PQ: 0 ANSI: 0
[ 3.280743] sd 7:0:0:0: [sde] 490234752 512-byte logical blocks: (251 GB/233 GiB)
[ 3.281606] sd 7:0:0:0: [sde] Write Protect is off
[ 3.281609] sd 7:0:0:0: [sde] Mode Sense: 27 00 00 00
[ 3.281611] sd 7:0:0:0: [sde] Assuming drive cache: write through
[ 3.283362] sd 7:0:0:0: [sde] Assuming drive cache: write through
[ 3.283368] sde: sde1
[ 3.305108] sd 7:0:0:0: [sde] Assuming drive cache: write through
[ 3.305111] sd 7:0:0:0: [sde] Attached SCSI disk
[ 3.449214] sd 6:0:0:0: [sdd] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
[ 3.449713] sd 6:0:0:0: [sdd] Write Protect is off
[ 3.449715] sd 6:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 3.449717] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 3.453091] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 3.453095] sdd: sdd1
[ 3.485716] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 3.485719] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 3.521584] scsi 8:0:0:0: Direct-Access SanDisk Cruzer Mini 0.3 PQ: 0 ANSI: 2
[ 3.522467] sd 8:0:0:0: [sdf] 2001888 512-byte logical blocks: (1.02 GB/977 MiB)
[ 3.523092] sd 8:0:0:0: [sdf] Write Protect is off
[ 3.523095] sd 8:0:0:0: [sdf] Mode Sense: 03 00 00 00
[ 3.523098] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[ 3.525839] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[ 3.525844] sdf: sdf1
[ 3.528770] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[ 3.528774] sd 8:0:0:0: [sdf] Attached SCSI removable disk
[ 4.016019] usb 5-3: new high speed USB device using ehci_hcd and address 5
[ 4.151553] usb 5-3: New USB device found, idVendor=04fc, idProduct=0c25
[ 4.151555] usb 5-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 4.151558] usb 5-3: Product: USB to Serial-ATA bridge
[ 4.151560] usb 5-3: Manufacturer: Sunplus Technology Inc.
[ 4.151561] usb 5-3: SerialNumber: TOSHIBA MK 366T2926T
[ 4.153802] scsi9 : usb-storage 5-3:1.0
[ 5.156139] scsi 9:0:0:0: Direct-Access TOSHIBA MK8032GSX PQ: 0 ANSI: 2
[ 5.157583] sd 9:0:0:0: [sdg] 153356490 512-byte logical blocks: (78.5 GB/73.1 GiB)
[ 5.160027] sd 9:0:0:0: [sdg] Write Protect is off
[ 5.160031] sd 9:0:0:0: [sdg] Mode Sense: 38 00 00 00
[ 5.160034] sd 9:0:0:0: [sdg] Assuming drive cache: write through
[ 5.163378] sd 9:0:0:0: [sdg] Assuming drive cache: write through
[ 5.163381] sdg: sdg1 sdg2 < sdg5 >
[ 5.206511] sd 9:0:0:0: [sdg] Assuming drive cache: write through
[ 5.206515] sd 9:0:0:0: [sdg] Attached SCSI disk
[ 9.750692] Intel AES-NI instructions are not detected.
[ 9.766778] padlock: VIA PadLock not detected.
[ 10.147072] dracut: Scanning devices dm-0 for LVM logical volumes vg_puppetmaster/lv_root vg_puppetmaster/lv_swap
[ 10.482166] dracut: inactive '/dev/vg_puppetmaster/lv_root' [50.00 GiB] inherit
[ 10.482316] dracut: inactive '/dev/vg_puppetmaster/lv_home' [98.72 GiB] inherit
[ 10.482455] dracut: inactive '/dev/vg_puppetmaster/lv_swap' [3.44 GiB] inherit
[ 12.525167] EXT4-fs (dm-1): mounted filesystem with ordered data mode
[ 12.613114] dracut: Mounted root filesystem /dev/mapper/vg_puppetmaster-lv_root
[ 12.745782] dracut: Loading SELinux policy
[ 13.145784] dracut: /sbin/load_policy: Can't load policy: No such device
[ 13.380109] dracut: Switching root
[ 14.139939] readahead: starting
[ 17.504081] udev[889]: starting version 161
[ 19.623694] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[ 19.864383] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 19.864416] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 19.864474] r8169 0000:02:00.0: setting latency timer to 64
[ 19.864542] alloc irq_desc for 438 on node 0
[ 19.864544] alloc kstat_irqs on node 0
[ 19.864548] r8169 0000:02:00.0: irq 438 (278) for MSI/MSI-X
[ 19.865022] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc90010888000, 90:e6:ba:71:7d:a8, XID 083000c0 IRQ 438
[ 20.122434] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 20.215429] ACPI: WMI: Mapper loaded
[ 20.223511] No available Cx info for cpu 2
[ 20.223771] No available Cx info for cpu 3
[ 20.224035] No available Cx info for cpu 4
[ 20.224289] No available Cx info for cpu 5
[ 20.224510] No available Cx info for cpu 6
[ 20.226115] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 20.264466] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0x0b00-0x0b0f window]
[ 20.264472] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.318068] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 20.318167] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 20.318237] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 20.318300] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 20.318363] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 20.318415] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 20.318478] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 20.318533] sd 9:0:0:0: Attached scsi generic sg7 type 0
[ 20.357952] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.288256] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.398570] ALSA hda_codec.c:4358: autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0)
[ 21.398580] ALSA hda_codec.c:4362: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 21.398587] ALSA hda_codec.c:4366: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 21.398593] ALSA hda_codec.c:4367: mono: mono_out=0x0
[ 21.398597] ALSA hda_codec.c:4370: dig-out=0x20/0x21
[ 21.398601] ALSA hda_codec.c:4378: inputs: mic=0x1a, fmic=0x1e, line=0x1b, fline=0x0, cd=0x0, aux=0x0
[ 21.403692] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 21.403778] HDA Intel 0000:01:05.1: setting latency timer to 64
[ 23.910672] Event-channel device installed.
[ 27.399966] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 27.508928] EXT4-fs (dm-3): mounted filesystem with ordered data mode
[ 27.585229] fuse init (API version 7.13)
[ 29.037114] Adding 3604476k swap on /dev/mapper/vg_puppetmaster-lv_swap. Priority:-1 extents:1 across:3604476k