All pastes #2051119 Raw Edit

Stuff

public text v1 · immutable
#2051119 ·published 2011-04-27 07:21 UTC
rendered paste body
CFE version 1.0.34 for BCM95365R (32bit,SP,LE)
Build Date: Tue Feb 24 03:21:41 CST 2004 (root@jackylinux)
Copyright (C) 2000,2001,2002 Broadcom Corporation.

Add MAC client version(DNI).
Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller
CPU type 0x29007: 200MHz
Total memory: 0x2000000 bytes (32MB)

Total memory used by CFE:  0x81BB1280 - 0x82000000 (4517248)
Initialized Data:          0x81BB1280 - 0x81BB3E90 (11280)
BSS Area:                  0x81BB3E90 - 0x81BB45D0 (1856)
Local Heap:                0x81BB45D0 - 0x81FB45D0 (4194304)
Stack Area:                0x81FB45D0 - 0x81FB65D0 (8192)
Text (code) segment:       0x81FB65E0 - 0x81FFFFB0 (301520)
Boot area (physical):      0x01B70000 - 0x01BB0000
Relocation Factor:         I:E23B65E0 - D:01BB0280

configure vlans
*****************************************************************
*********************** VLAN Driver initial  ********************
*****************************************************************
Process LAN port(2-5) vlan Architecture...
SUCCESS: trying to create VLAN 0 for switch
SUCCESS: trying to add LAN port

Process WAN port(2-5) vlan Architecture...
SUCCESS: trying to create VLAN 0 for switch
SUCCESS: trying to add WAN port
SUCCESS: enable ports  success
configure vlans...done
Device eth0:  hwaddr 00-0F-B5-0C-E3-86, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Loader:elf Filesys:raw Dev:flash0.os File: Options:(null)
***************************
****  MAC Client V1.0  ****
***************************
et0macaddr value :flag =0 value=00-0f-b5-0c-e3-86
et1macaddr value :flag =0 value=00-0f-b5-0c-e3-87
MAC exist at least one
system ethernet mac exist and not default....
Skip mac client process.....
Loading: 0x80000000/8188 Entry at 0x80001000
Closing network.
et0: link down
Starting program at 0x80001000
Linux version 2.6.37.6 (russell@frieda) (gcc version 4.5.2 (Linaro GCC 4.5-2011.02-0) ) #1 Tue Apr 26 23:59:22 PDT 2011
CPU revision is: 00029007 (Broadcom BMIPS3300)
ssb: chipcommon status is 0x0
ssb: Initializing MIPS core...
ssb: set_irq: core 0x0806, irq 4 => 4
ssb: set_irq: core 0x080b, irq 5 => 2
ssb: set_irq: core 0x0804, irq 2 => 5
ssb: after irq reconfiguration
ssb: core 0x0800, irq : 2(S)  3* 4  5  6  D  I 
ssb: core 0x0806, irq : 2(S)  3  4* 5  6  D  I 
ssb: core 0x080b, irq : 2(S)* 3  4  5  6  D  I 
ssb: core 0x0808, irq : 2(S)  3  4  5  6* D  I 
ssb: core 0x0804, irq : 2(S)  3  4  5* 6  D  I 
ssb: core 0x0816, irq : 2(S)* 3  4  5  6  D  I 
ssb: core 0x080f, irq : 2(S)  3  4  5  6  D  I*
early_nvram_init: WGT634U NVRAM found.
Can not parse mac address: (null)
ssb: Sonics Silicon Backplane found at address 0x18000000
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00002000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 8kB, VIPT, 2-way, linesize 16 bytes.
Primary data cache 4kB, 2-way, VIPT, no aliases, linesize 16 bytes
Memory: 29724k/32768k available (2114k kernel code, 3044k reserved, 308k data, 148k init, 0k highmem)
NR_IRQS:128
console [ttyS0] enabled
Calibrating delay loop... 198.65 BogoMIPS (lpj=397312)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
ssb: PCIcore in host mode found
PCI: Fixing up bridge 0000:00:00.0
PCI: Fixing up device 0000:00:00.0
PCI: Fixing latency timer of device 0000:00:00.0 to 168
pci 0000:00:01.0: BAR 0: assigned [mem 0x40000000-0x4000ffff]
pci 0000:00:01.0: BAR 0: set to [mem 0x40000000-0x4000ffff] (PCI address [0x40000000-0x4000ffff])
pci 0000:00:02.0: BAR 0: assigned [mem 0x40010000-0x40010fff]
pci 0000:00:02.0: BAR 0: set to [mem 0x40010000-0x40010fff] (PCI address [0x40010000-0x40010fff])
pci 0000:00:02.1: BAR 0: assigned [mem 0x40011000-0x40011fff]
pci 0000:00:02.1: BAR 0: set to [mem 0x40011000-0x40011fff] (PCI address [0x40011000-0x40011fff])
pci 0000:00:02.2: BAR 0: assigned [mem 0x40012000-0x400120ff]
pci 0000:00:02.2: BAR 0: set to [mem 0x40012000-0x400120ff] (PCI address [0x40012000-0x400120ff])
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
msgmni has been set to 58
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
serial8250: ttyS0 at MMIO 0xb8000400 (irq = 3) is a 16550A
serial8250: ttyS1 at MMIO 0xb8000300 (irq = 3) is a 16550A
serial8250.0: ttyS0 at MMIO 0xb8000400 (irq = 3) is a 16550A
serial8250.0: ttyS1 at MMIO 0xb8000300 (irq = 3) is a 16550A
flash init: 0x1c000000 0x02000000
Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000089 Chip ID 0x000017
Intel/Sharp Extended Query Table at 0x0031
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Flash device: 0x800000 at 0x1fc00000
bootloader size: 655360
Looking for dual image
TRX offset : 0
Creating 4 MTD partitions on "Physically mapped flash":
0x000000000000-0x0000000a0000 : "cfe"
0x0000000a0000-0x0000007e0000 : "linux"
0x00000016d000-0x0000007e0000 : "rootfs"
mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=380000, len=460000 
0x000000380000-0x0000007e0000 : "rootfs_data"
0x0000007e0000-0x000000800000 : "nvram"
b44: b44.c:v2.0
b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0f:b5:0c:e3:86
BCM47xx Watchdog Timer enabled (30 seconds, nowayout)
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 148k freed
diag: Detected 'Netgear WGT634U'
b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
b44 ssb0:0: eth0: Flow control is off for TX and off for RX
roboswitch: Probing device eth0: found a 5325!
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
jffs2 not ready yet; using ramdisk
- init -
b44 ssb0:0: eth0: powering down PHY

Please press Enter to activate this console. NET: Registered protocol family 10
lo: Disabled Privacy Extensions
b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
b44 ssb0:0: eth0: Flow control is off for TX and off for RX
Compat-wireless backport release: compat-wireless-2011-04-14
Backport based on wireless-testing.git master-2011-04-19
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
PCI: Fixing up device 0000:00:01.0
ath5k 0000:00:01.0: registered as 'phy0'
ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43)
ath5k phy0: RF5112B multiband radio found (0x36)
cfg80211: Calling CRDA for country: US
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
PCI: Enabling device 0000:00:02.2 (0000 -> 0002)
PCI: Fixing up device 0000:00:02.2
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: irq 5, io mem 0x40012000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
batman_adv: B.A.T.M.A.N. advanced 2011.1.0 (compatibility version 12) loaded
cfg80211: Regulatory domain changed to country: US
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
device wlan0 entered promiscuous mode
Data bus error, epc == 80124de4, ra == 80cc5b88
Oops[#1]:
Cpu 0
$ 0   : 00000000 1000b800 c03e0000 0001c000
$ 4   : c03e111c c03e109c 00000404 00000000
$ 8   : 00000001 00000000 00020008 03ff000f
$12   : 00000000 80ceba8c 00000000 00000000
$16   : 81b3c000 00000007 0000001c 0000111c
$20   : 81bc8200 81b71ed8 81bc8db4 00000004
$24   : 00000000 80cd6a48                  
$28   : 80c32000 80c33ac0 80290000 80cc5b88
Hi    : 00000000
Lo    : 00000000
epc   : 80124de4 0x80124de4
    Not tainted
ra    : 80cc5b88 0x80cc5b88
Status: 1000b802    KERNEL EXL 
Cause : 0080001c
PrId  : 00029007 (Broadcom BMIPS3300)
Modules linked in: batman_adv ehci_hcd ath5k ath mac80211 usbcore nls_base cfg80211 compat arc4 aes_generic crypto_algapi ipv6 switch_robo switch_core diag
Process hostapd (pid: 612, threadinfo=80c32000, task=81b5c5c8, tls=2ae5e2d0)
Stack : 1000b801 ffffffea 81b71ed8 81b71ed8 81bc8db4 81bc8da0 81b3c000 1000b801
        81b3c000 81bc8200 81b71ed8 80cd24b0 00000000 00000003 0000003c 0000000b
        00000001 ffffffff 00000000 00000002 00000003 00000000 00000008 00000000
        00000000 00000000 00000000 00000000 81bc8200 81bc8da0 81b71ee0 1000b801
        00000300 80cd6c74 80cf9000 8025b518 81bc880c 80cf9000 1000b801 81bcbea8
        ...
Call Trace:[<80cd24b0>] 0x80cd24b0
[<80cd6c74>] 0x80cd6c74
[<80c9685c>] 0x80c9685c
[<81be8128>] 0x81be8128
[<81be7448>] 0x81be7448
[<801ab034>] 0x801ab034
[<8003f0d4>] 0x8003f0d4
[<80014d68>] 0x80014d68
[<801aae8c>] 0x801aae8c
[<801aa2e4>] 0x801aa2e4
[<801aae7c>] 0x801aae7c
[<80044150>] 0x80044150
[<801a9744>] 0x801a9744
[<80180780>] 0x80180780
[<801a9d28>] 0x801a9d28
[<800259f0>] 0x800259f0
[<80176304>] 0x80176304
[<80094254>] 0x80094254
[<8002105c>] 0x8002105c
[<8006f820>] 0x8006f820
[<8018340c>] 0x8018340c
[<80178aec>] 0x80178aec
[<801e0e40>] 0x801e0e40
[<81b01130>] 0x81b01130
[<8017b820>] 0x8017b820
[<8009dc08>] 0x8009dc08
[<8009d480>] 0x8009d480
[<8009a97c>] 0x8009a97c
[<8009b118>] 0x8009b118
[<80177a5c>] 0x80177a5c
[<80089570>] 0x80089570
[<80085dc0>] 0x80085dc0
[<80098030>] 0x80098030
[<80085e68>] 0x80085e68
[<8000c890>] 0x8000c890


Code: 00431025  03e00008  3042ffff <8c820000> 03e00008  00000000  8c830000  00032602  00031600 
Disabling lock debugging due to kernel taint
Data bus error, epc == 80124de4, ra == 80cc4d74
Oops[#2]:
Cpu 0
$ 0   : 00000000 10009800 00000001 00000000
$ 4   : c03e4008 81bc8da0 fffefe8b 00000008
$ 8   : 00000020 801159b0 0b00e2b2 e2b2866b
$12   : 6a078055 09d21b40 9a8ff19b 2e19c98b
$16   : 81bc8da0 81b3c000 00000000 00000000
$20   : 00000000 80290000 80ce0000 00000002
$24   : 00000000 8000c668                  
$28   : 80c32000 80c33820 802268ac 80cc4d74
Hi    : 00000000
Lo    : 000001a4
epc   : 80124de4 0x80124de4
    Tainted: G      D    
ra    : 80cc4d74 0x80cc4d74
Status: 10009802    KERNEL EXL 
Cause : 0080201c
PrId  : 00029007 (Broadcom BMIPS3300)
Modules linked in: batman_adv ehci_hcd ath5k ath mac80211 usbcore nls_base cfg80211 compat arc4 aes_generic crypto_algapi ipv6 switch_robo switch_core diag
Process hostapd (pid: 612, threadinfo=80c32000, task=81b5c5c8, tls=2ae5e2d0)
Stack : 802a0574 802a0574 81b35e70 00000024 000002ff 80ccf3ac 01000000 8029a220
        00000001 800259f0 00000007 00000000 00000000 80290000 80c33858 80254438
        81b85d00 00000005 00000000 00000000 80290000 00000001 00000002 8004d0a8
        80250000 80250000 0000002d 80250000 80254438 00000005 0000000b 80124de4
        00000004 81b71ed8 81bc8db4 00000004 80290000 8004fe74 80290000 80020d5c
        ...
Call Trace:[<80ccf3ac>] 0x80ccf3ac
[<800259f0>] 0x800259f0
[<8004d0a8>] 0x8004d0a8
[<80124de4>] 0x80124de4
[<8004fe74>] 0x8004fe74
[<80020d5c>] 0x80020d5c
[<80005794>] 0x80005794
[<80002180>] 0x80002180
[<8001b2d0>] 0x8001b2d0
[<800039e4>] 0x800039e4
[<8001b2d0>] 0x8001b2d0
[<80124de4>] 0x80124de4
[<801461f0>] 0x801461f0
[<800097c8>] 0x800097c8
[<800097e0>] 0x800097e0
[<80009b90>] 0x80009b90
[<80124de4>] 0x80124de4
[<800039c0>] 0x800039c0
[<80c45ecc>] 0x80c45ecc
[<80cd6a48>] 0x80cd6a48
[<80cc5b88>] 0x80cc5b88
[<80124de4>] 0x80124de4
[<80cd24b0>] 0x80cd24b0
[<80cd6c74>] 0x80cd6c74
[<80c9685c>] 0x80c9685c
[<81be8128>] 0x81be8128
[<81be7448>] 0x81be7448
[<801ab034>] 0x801ab034
[<8003f0d4>] 0x8003f0d4
[<80014d68>] 0x80014d68
[<801aae8c>] 0x801aae8c
[<801aa2e4>] 0x801aa2e4
[<801aae7c>] 0x801aae7c
[<80044150>] 0x80044150
[<801a9744>] 0x801a9744
[<80180780>] 0x80180780
[<801a9d28>] 0x801a9d28
[<800259f0>] 0x800259f0
[<80176304>] 0x80176304
[<80094254>] 0x80094254
[<8002105c>] 0x8002105c
[<8006f820>] 0x8006f820
[<8018340c>] 0x8018340c
[<80178aec>] 0x80178aec
[<801e0e40>] 0x801e0e40
[<81b01130>] 0x81b01130
[<8017b820>] 0x8017b820
[<8009dc08>] 0x8009dc08
[<8009d480>] 0x8009d480
[<8009a97c>] 0x8009a97c
[<8009b118>] 0x8009b118
[<80177a5c>] 0x80177a5c
[<80089570>] 0x80089570
[<80085dc0>] 0x80085dc0
[<80098030>] 0x80098030
[<80085e68>] 0x80085e68
[<8000c890>] 0x8000c890


Code: 00431025  03e00008  3042ffff <8c820000> 03e00008  00000000  8c830000  00032602  00031600 
Kernel panic - not syncing: Fatal exception in interrupt