smartctl 5.40 2010-10-16 r3189 [i486-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10 family
Device Model: ST3750640AS
Serial Number: xxxxxxxxxxx
Firmware Version: 3.AAK
User Capacity: 750,155,292,160 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Mon Jan 3 13:59:18 2011 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 202) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 103 094 006 Pre-fail Always - 6029128
3 Spin_Up_Time 0x0003 096 093 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 179
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 237371786
9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 11039
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 179
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 080 048 045 Old_age Always - 20 (Min/Max 13/20)
194 Temperature_Celsius 0x0022 020 052 000 Old_age Always - 20 (0 12 0 0)
195 Hardware_ECC_Recovered 0x001a 091 058 000 Old_age Always - 116906382
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 121 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 121 occurred at disk power-on lifetime: 5160 hours (215 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 ae 5e 54 e7
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 ae 5e 54 e7 00 00:23:42.492 SET MAX ADDRESS EXT
27 00 00 ae 5e 54 e0 00 00:23:42.367 READ NATIVE MAX ADDRESS EXT
37 00 00 ae 5e 54 e7 00 00:23:42.300 SET MAX ADDRESS EXT
27 00 01 ae 5e 54 e0 00 00:23:37.410 READ NATIVE MAX ADDRESS EXT
37 00 01 ae 5e 54 e7 00 00:23:37.361 SET MAX ADDRESS EXT
Error 120 occurred at disk power-on lifetime: 5160 hours (215 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 ae 5e 54 e7
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 ae 5e 54 e7 00 00:23:42.492 SET MAX ADDRESS EXT
27 00 00 ae 5e 54 e0 00 00:23:42.367 READ NATIVE MAX ADDRESS EXT
37 00 00 ae 5e 54 e7 00 00:23:42.300 SET MAX ADDRESS EXT
27 00 01 ef 66 54 e0 00 00:23:37.410 READ NATIVE MAX ADDRESS EXT
29 00 01 ef 66 54 e0 00 00:23:37.361 READ MULTIPLE EXT
Error 119 occurred at disk power-on lifetime: 5160 hours (215 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 ae 5e 54 e7
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 ae 5e 54 e7 00 00:19:21.739 SET MAX ADDRESS EXT
27 00 00 ae 5e 54 e0 00 00:19:21.515 READ NATIVE MAX ADDRESS EXT
37 00 00 ae 5e 54 e7 00 00:19:21.451 SET MAX ADDRESS EXT
27 00 01 ae 5e 54 e0 00 00:19:21.314 READ NATIVE MAX ADDRESS EXT
37 00 01 ae 5e 54 e7 00 00:19:21.189 SET MAX ADDRESS EXT
Error 118 occurred at disk power-on lifetime: 5160 hours (215 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 ae 5e 54 e7
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 ae 5e 54 e7 00 00:19:21.739 SET MAX ADDRESS EXT
27 00 00 ae 5e 54 e0 00 00:19:21.515 READ NATIVE MAX ADDRESS EXT
37 00 00 ae 5e 54 e7 00 00:19:21.451 SET MAX ADDRESS EXT
27 00 01 ef 66 54 e0 00 00:19:21.314 READ NATIVE MAX ADDRESS EXT
29 00 01 ef 66 54 e0 00 00:19:21.189 READ MULTIPLE EXT
Error 117 occurred at disk power-on lifetime: 5057 hours (210 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 ae 5e 54 e7
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 ae 5e 54 e7 00 00:00:58.954 SET MAX ADDRESS EXT
27 00 00 ae 5e 54 e0 00 00:00:58.895 READ NATIVE MAX ADDRESS EXT
37 00 00 ae 5e 54 e7 00 00:00:58.670 SET MAX ADDRESS EXT
27 00 01 ae 5e 54 e0 00 00:00:58.607 READ NATIVE MAX ADDRESS EXT
37 00 01 ae 5e 54 e7 00 00:00:56.526 SET MAX ADDRESS EXT
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.