Script started on Wed Dec 8 20:26:44 2010
]0;tigersharke@mutant:/home/tigersharke[[1mtigersharke@mutant[m] [1m/home/tigersharke[m# demesg[K[K[K[K[Kmesg
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-PRERELEASE #4: Tue Dec 7 01:38:12 CST 2010
tigersharke@mutant:/usr/obj/usr/src/sys/PCBSD amd64
module ath already present!
module_register: module re/miibus already exists!
Module re/miibus failed to register: 17
module_register: module pci/re already exists!
Module pci/re failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Dual Core Processor 5000B (2606.63-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x60fb2 Family = f Model = 6b Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
TSC: P-state invariant
real memory = 8589934592 (8192 MB)
avail memory = 7979794432 (7610 MB)
ACPI APIC Table: <LENOVO TC-56 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TC-56> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: HPET never increments, disabling
device_attach: acpi_hpet0 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0xfe9f0000-0xfe9fffff,0xfe800000-0xfe8fffff irq 18 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 5416> mem 0xfeaf0000-0xfeafffff irq 16 at device 0.0 on pci2
ath0: [ITHREAD]
ath0: AR5418 mac 12.10 RF2133 phy 8.1
ahci0: <ATI IXP700 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe7ff800-0xfe7ffbff irq 22 at device 17.0 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at device 18.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xfe7fd000-0xfe7fdfff irq 16 at device 18.1 on pci0
ohci1: [ITHREAD]
usbus1: <OHCI (generic) USB controller> on ohci1
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff000-0xfe7ff0ff irq 17 at device 18.2 on pci0
ehci0: [ITHREAD]
ehci0: AMD SB600/700 quirk applied
usbus2: EHCI version 1.0
usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
ohci2: <OHCI (generic) USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at device 19.0 on pci0
ohci2: [ITHREAD]
usbus3: <OHCI (generic) USB controller> on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xfe7fb000-0xfe7fbfff irq 18 at device 19.1 on pci0
ohci3: [ITHREAD]
usbus4: <OHCI (generic) USB controller> on ohci3
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe7fa800-0xfe7fa8ff irq 19 at device 19.2 on pci0
ehci1: [ITHREAD]
ehci1: AMD SB600/700 quirk applied
usbus5: EHCI version 1.0
usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
hdac0: <ATI SB600 High Definition Audio Controller> mem 0xfe7f4000-0xfe7f7fff irq 16 at device 20.2 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <Linksys EG1032 (RTL8169S) Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 21 at device 4.0 on pci3
re0: Chip rev. 0x04000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 00:18:f8:0d:63:66
re0: [FILTER]
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
acpi_hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
acpi_throttle0: <ACPI CPU Throttling> on cpu0
powernow0: <PowerNow! K8> on cpu0
powernow1: <PowerNow! K8> on cpu1
ZFS filesystem version 4
ZFS storage pool version 15
Timecounters tick every 1.000 msec
hdac0: HDA Codec #0: Realtek ALC662
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
pcm0: <HDA Realtek ALC662 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC662 PCM #1 Analog> at cad 0 nid 1 on hdac0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub3: 3 ports with 3 removable, self powered
uhub4: 3 ports with 3 removable, self powered
ada0 at ahcich3 bus 0 scbus3 target 0 lun 0
ada0: <WDC WD1600AAJS-08WAA0 58.01D58> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C)
SMP: AP CPU #1 Launched!
cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
cd0: <ATAPI DVD A DH16A3S 3L36> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Root mount waiting for: usbus5 usbus2
Root mount waiting for: usbus5 usbus2
uhub2: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
Root mount waiting for: usbus2
ugen0.2: <LITE-ON Technology> at usbus0
ukbd0: <EP1 Interrupt> on usbus0
kbd2 at ukbd0
uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT
uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1
Trying to mount root from ufs:/dev/label/rootfs0
WARNING: / was not properly dismounted
ugen0.3: <Kensington> at usbus0
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 3> on usbus0
ums0: 4 buttons and [XYZ] coordinates ID=0
uhub_reattach_port: port 2 reset failed, error=USB_ERR_TIMEOUT
uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 2
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 4 files 1
WARNING: /usr was not properly dismounted
WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD.
wlan0: Ethernet address: 00:18:f8:0d:63:66
drm0: <ATI Radeon 3100 Graphics> on vgapci0
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] Initialized radeon 1.31.0 20080613
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RS780/RS880 Microcode
info: [drm] Resetting GPU
info: [drm] writeback test succeeded in 1 usecs
drm0: [ITHREAD]
lagg0: link state changed to DOWN
wlan0: Ethernet address: 00:18:f8:0d:63:66
lagg0: link state changed to DOWN
wlan0: Ethernet address: 00:18:f8:0d:63:66
wlan0: Ethernet address: 00:18:f8:0d:63:66
re0: link state changed to UP
lagg0: link state changed to UP
wlan0: Ethernet address: 00:18:f8:0d:63:66
re0: link state changed to DOWN
lagg0: link state changed to DOWN
re0: link state changed to UP
lagg0: link state changed to UP
wlan0: Ethernet address: 00:18:f8:0d:63:66
re0: link state changed to DOWN
lagg0: link state changed to DOWN
re0: link state changed to UP
lagg0: link state changed to UP
re0: link state changed to DOWN
lagg0: link state changed to DOWN
re0: link state changed to UP
lagg0: link state changed to UP
re0: link state changed to DOWN
lagg0: link state changed to DOWN
re0: link state changed to UP
lagg0: link state changed to UP
re0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: Ethernet address: 00:18:f8:0d:63:66
re0: link state changed to UP
lagg0: link state changed to UP
re0: link state changed to DOWN
lagg0: link state changed to DOWN
re0: link state changed to UP
lagg0: link state changed to UP
re0: link state changed to DOWN
lagg0: link state changed to DOWN
re0: link state changed to UP
lagg0: link state changed to UP
re0: link state changed to DOWN
lagg0: link state changed to DOWN
re0: link state changed to UP
lagg0: link state changed to UP
re0: link state changed to DOWN
lagg0: link state changed to DOWN
re0: link state changed to UP
lagg0: link state changed to UP
wlan0: Ethernet address: 00:18:f8:0d:63:66
re0: link state changed to DOWN
lagg0: link state changed to DOWN
re0: link state changed to UP
lagg0: link state changed to UP
re0: link state changed to DOWN
lagg0: link state changed to DOWN
re0: link state changed to UP
lagg0: link state changed to UP
re0: link state changed to DOWN
lagg0: link state changed to DOWN
re0: link state changed to UP
lagg0: link state changed to UP
lagg0: link state changed to DOWN
lagg0: link state changed to UP
wlan0: Ethernet address: 00:18:f8:0d:63:66
re0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: link state changed to UP
re0: link state changed to UP
lagg0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: Ethernet address: 00:18:f8:0d:63:66
re0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: link state changed to UP
lagg0: link state changed to UP
re0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: Ethernet address: 00:18:f8:0d:63:66
re0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: link state changed to UP
lagg0: link state changed to UP
re0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: Ethernet address: 00:18:f8:0d:63:66
re0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: link state changed to UP
lagg0: link state changed to UP
re0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: Ethernet address: 00:18:f8:0d:63:66
re0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: link state changed to UP
lagg0: link state changed to UP
re0: link state changed to UP
pid 36828 (npviewer.bin), uid 1001: exited on signal 11
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
module ndis already present!
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: Ethernet address: 00:18:f8:0d:63:66
re0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: link state changed to UP
lagg0: link state changed to UP
re0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
]0;tigersharke@mutant:/home/tigersharke[[1mtigersharke@mutant[m] [1m/home/tigersharke[m# ifconfig
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 00:18:f8:0d:63:66
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
status: associated
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
ether 00:18:f8:0d:63:66
inet6 fe80::218:f8ff:fe0d:6366%re0 prefixlen 64 scopeid 0x2
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
pflog0: flags=0<> metric 0 mtu 33152
pfsync0: flags=0<> metric 0 mtu 1460
syncpeer: 224.0.0.240 maxupd: 128
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet 127.0.0.1 netmask 0xff000000
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
lo1: flags=8048<LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:18:f8:0d:63:66
inet6 fe80::218:f8ff:fe0d:6366%lagg0 prefixlen 64 scopeid 0x6
inet 192.168.1.100 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
media: Ethernet autoselect
status: active
laggproto failover
laggport: wlan0 flags=0<>
laggport: re0 flags=5<MASTER,ACTIVE>
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:18:f8:0d:63:66
inet6 fe80::218:f8ff:fe0d:6366%wlan0 prefixlen 64 scopeid 0x7
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11g
status: associated
ssid paradise channel 7 (2442 MHz 11g) bssid 00:1c:10:f9:2e:fc
regdomain FCC indoor ecm authmode WPA2/802.11i privacy ON
deftxkey UNDEF TKIP 2:128-bit txpower 27 bmiss 7 scanvalid 450 bgscan
bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
wme burst roaming MANUAL
]0;tigersharke@mutant:/home/tigersharke[[1mtigersharke@mutant[m] [1m/home/tigersharke[m# ^Dexit
Script done on Wed Dec 8 20:27:06 2010