rendered paste bodyLinux version 2.6.31.6 (root@ixus) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #3 SMP Mon Nov 30 00:08:58 EET 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
BIOS-e820: 000000007ffae000 - 000000007fff0000 (ACPI NVS)
BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x7ffa0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e3000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007ffa0000 (usable)
modified: 000000007ffa0000 - 000000007ffae000 (ACPI data)
modified: 000000007ffae000 - 000000007fff0000 (ACPI NVS)
modified: 000000007fff0000 - 0000000080000000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffb00000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01c00000
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 37e03000 - 37fef6ec
Allocated new RAMDISK: 00100000 - 002ec6ec
Move RAMDISK from 0000000037e03000 - 0000000037fef6eb to 00100000 - 002ec6eb
ACPI: RSDP 000f8250 00024 (v02 ACPIAM)
ACPI: XSDT 7ffa0100 0007C (v01 _ASUS_ Notebook 02000812 MSFT 00000097)
ACPI: FACP 7ffa0290 000F4 (v03 A_M_I_ OEMFACP 02000812 MSFT 00000097)
ACPI: DSDT 7ffa0680 0B505 (v01 F3Sa0 F3Sa0303 00000303 INTL 20051117)
ACPI: FACS 7ffae000 00040
ACPI: APIC 7ffa0390 0005C (v01 A_M_I_ OEMAPIC 02000812 MSFT 00000097)
ACPI: MCFG 7ffa0430 0003C (v01 A_M_I_ OEMMCFG 02000812 MSFT 00000097)
ACPI: SLIC 7ffa0470 00176 (v01 _ASUS_ Notebook 02000812 MSFT 00000097)
ACPI: DBGP 7ffa03f0 00034 (v01 A_M_I_ OEMDBGP 02000812 MSFT 00000097)
ACPI: BOOT 7ffa05f0 00028 (v01 A_M_I_ OEMBOOT 02000812 MSFT 00000097)
ACPI: ECDT 7ffa0620 00054 (v01 A_M_I_ OEMECDT 02000812 MSFT 00000097)
ACPI: OEMB 7ffae040 00060 (v01 A_M_I_ AMI_OEM 02000812 MSFT 00000097)
ACPI: HPET 7ffabb90 00038 (v01 A_M_I_ OEMHPET 02000812 MSFT 00000097)
ACPI: ATKG 7ffae2a0 08024 (v01 A_M_I_ OEMATKG 05000702 MSFT 00000097)
ACPI: SSDT 7ffb6de0 004E6 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
1159MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00011000 - 00017f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 000171b718] TEXT DATA BSS ==> [0001000000 - 000171b718]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [000171c000 - 0001723204] BRK ==> [000171c000 - 0001723204]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [0000100000 - 00002ec6ec] NEW RAMDISK ==> [0000100000 - 00002ec6ec]
#8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00ff780] ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007ffa0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007ffa0
On node 0 totalpages: 524079
free_area_init_node: node 0, pgdat c1602140, node_mem_map c1724200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2320 pages used for memmap
HighMem zone: 294546 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages at c272e000, static data 32988 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519983
Kernel command line: root=/dev/sda5 vga=791 ro selinux=0 nohotplug
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0007ffa0)
Memory: 2068836k/2096768k available (4026k kernel code, 26632k reserved, 2172k data, 372k init, 1187464k highmem)
virtual kernel memory layout:
fixmap : 0xfff1f000 - 0xfffff000 ( 896 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc160e000 - 0xc166b000 ( 372 kB)
.data : 0xc13eeac9 - 0xc160de08 (2172 kB)
.text : 0xc1000000 - 0xc13eeac9 (4026 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
NR_IRQS:512
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2194.802 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.60 BogoMIPS (lpj=2194802)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Counters: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic counters: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose counters: 3
... counter mask: 0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090521
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4388.77 BogoMIPS (lpj=2194386)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (8778.37 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=9
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255
PCI: MCFG area at c0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI Warning: Incorrect checksum in table [ATKG] - E4, should be 59 20090521 tbutils-246
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xe080-0xe09f]
pci 0000:00:1a.1: reg 20 io port: [0xe000-0xe01f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfebff400-0xfebff7ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfebf8000-0xfebfbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xdc00-0xdc1f]
pci 0000:00:1d.1: reg 20 io port: [0xd880-0xd89f]
pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebff000-0xfebff3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10 io port: [0xec00-0xec07]
pci 0000:00:1f.2: reg 14 io port: [0xe880-0xe883]
pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807]
pci 0000:00:1f.2: reg 1c io port: [0xe480-0xe483]
pci 0000:00:1f.2: reg 20 io port: [0xe400-0xe41f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfebff800-0xfebfffff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
pci 0000:01:00.0: reg 14 io port: [0x9000-0x90ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xfddf0000-0xfddfffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xfddc0000-0xfdddffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x7000-0x9fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xdbc00000-0xfbbfffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xfdec0000-0xfdefffff]
pci 0000:02:00.0: reg 30 32bit mmio: [0xfdea0000-0xfdebffff]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xfdffe000-0xfdffffff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
pci 0000:04:00.0: reg 10 io port: [0xac00-0xac07]
pci 0000:04:00.0: reg 14 io port: [0xa880-0xa883]
pci 0000:04:00.0: reg 18 io port: [0xa800-0xa807]
pci 0000:04:00.0: reg 1c io port: [0xa480-0xa483]
pci 0000:04:00.0: reg 20 io port: [0xa400-0xa40f]
pci 0000:04:00.0: reg 24 32bit mmio: [0xfe0fe000-0xfe0fffff]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.2: bridge io port: [0xa000-0xafff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xfe000000-0xfe0fffff]
pci 0000:00:1c.4: bridge io port: [0xb000-0xbfff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfe100000-0xfe8fffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xfbc00000-0xfdbfffff]
pci 0000:08:00.0: reg 10 32bit mmio: [0xfe9ffc00-0xfe9fffff]
pci 0000:08:00.0: reg 18 io port: [0xcc00-0xcc7f]
pci 0000:08:00.0: reg 30 32bit mmio: [0xfe9e0000-0xfe9effff]
pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
pci 0000:09:01.0: reg 10 32bit mmio: [0xfeaff800-0xfeafffff]
pci 0000:09:01.0: PME# supported from D0 D3hot D3cold
pci 0000:09:01.0: PME# disabled
pci 0000:09:01.1: reg 10 32bit mmio: [0xfeaff400-0xfeaff4ff]
pci 0000:09:01.1: supports D1 D2
pci 0000:09:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.1: PME# disabled
pci 0000:09:01.2: reg 10 32bit mmio: [0xfeaff000-0xfeaff0ff]
pci 0000:09:01.2: supports D1 D2
pci 0000:09:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.2: PME# disabled
pci 0000:09:01.3: reg 10 32bit mmio: [0xfeafec00-0xfeafecff]
pci 0000:09:01.3: supports D1 D2
pci 0000:09:01.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.3: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs *6)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 12)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
NET: Registered protocol family 8
NET: Registered protocol family 20
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x400-0x41f has been reserved
system 00:08: ioport range 0x500-0x53f has been reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
system 00:0a: ioport range 0x250-0x253 has been reserved
system 00:0a: ioport range 0x256-0x25f has been reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: iomem range 0xc0000000-0xcfffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x7000-0x9fff
pci 0000:00:01.0: MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:01.0: PREFETCH window: 0x000000dbc00000-0x000000fbbfffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: 0xfde00000-0xfdefffff
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: 0xfdf00000-0xfdffffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2: IO window: 0xa000-0xafff
pci 0000:00:1c.2: MEM window: 0xfe000000-0xfe0fffff
pci 0000:00:1c.2: PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.3: IO window: disabled
pci 0000:00:1c.3: MEM window: disabled
pci 0000:00:1c.3: PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.4: IO window: 0xb000-0xbfff
pci 0000:00:1c.4: MEM window: 0xfe100000-0xfe8fffff
pci 0000:00:1c.4: PREFETCH window: 0x000000fbc00000-0x000000fdbfffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.5: IO window: 0xc000-0xcfff
pci 0000:00:1c.5: MEM window: 0xfe900000-0xfe9fffff
pci 0000:00:1c.5: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0xfea00000-0xfeafffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0x7000-0x9fff]
pci_bus 0000:01: resource 1 mem: [0xfdd00000-0xfddfffff]
pci_bus 0000:01: resource 2 pref mem [0xdbc00000-0xfbbfffff]
pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 1 mem: [0xfdf00000-0xfdffffff]
pci_bus 0000:04: resource 0 io: [0xa000-0xafff]
pci_bus 0000:04: resource 1 mem: [0xfe000000-0xfe0fffff]
pci_bus 0000:06: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:06: resource 1 mem: [0xfe100000-0xfe8fffff]
pci_bus 0000:06: resource 2 pref mem [0xfbc00000-0xfdbfffff]
pci_bus 0000:08: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:08: resource 1 mem: [0xfe900000-0xfe9fffff]
pci_bus 0000:09: resource 1 mem: [0xfea00000-0xfeafffff]
pci_bus 0000:09: resource 3 io: [0x00-0xffff]
pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 1969k freed
Simple Boot Flag at 0x52 set to 0x1
microcode: CPU0 sig=0x6fb, pf=0x80, revision=0xb3
microcode: CPU1 sig=0x6fb, pf=0x80, revision=0xb3
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Scanning for low memory corruption every 60 seconds
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.29 [Flags: R/O].
msgmni has been set to 1726
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 29 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.5: irq 30 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
vesafb: framebuffer at 0xe0000000, mapped to 0xf8100000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:9eda
vesafb: pmi: set display start = c00c9f7c, set palette = c00ca03a
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC0] (on-line)
input: Power Button as /class/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /class/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /class/input/input2
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Lid Switch [LID]
ACPI: SSDT 7ffb63a0 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 7ffb66c0 00712 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
Switched to high resolution mode on CPU 0
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor LNXCPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
Switched to high resolution mode on CPU 1
ACPI: SSDT 7ffb62d0 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT 7ffb6630 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
ACPI: CPU1 (power states: C1[C1] C2[C2])
processor LNXCPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (62 C)
Linux agpgart interface v0.103
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
ACPI: Battery Slot [BAT0] (battery present)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x03)
pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
piix 0000:00:1f.1: IDE port disabled
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7
Probing IDE interface ide0...
hda: MATSHITADVD-RAM UJ-860S, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
3ware Storage Controller device driver for Linux v1.26.02.002.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff900 irq 31
ata2: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff980 irq 31
ata3: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa00 irq 31
ahci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:04:00.0: setting latency timer to 64
scsi3 : ahci
ata4: SATA max UDMA/133 abar m8192@0xfe0fe000 port 0xfe0fe100 irq 18
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
atl1 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
atl1 0000:02:00.0: setting latency timer to 64
atl1 0000:02:00.0: version 2.1.3
console [netcon0] enabled
netconsole: network logging started
Fusion MPT base driver 3.04.10
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.10
ohci1394 0000:09:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/4]
ieee1394: raw1394: /dev/raw1394 device initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata4: SATA link down (SStatus 0 SControl 300)
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
ata1.00: ATA-7: ST9160821AS, 3.ALC, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
hub 1-0:1.0: 4 ports detected
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ata1.00: configured for UDMA/133
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e080
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
usbcore: registered new interface driver usbled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
usb 1-2: new high speed USB device using ehci_hcd and address 2
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.AL PQ: 0 ANSI: 5
input: AT Translated Set 2 keyboard as /class/input/input3
sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22)
sdhci-pci 0000:09:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
sdhci-pci 0000:09:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Registered led device: mmc0::
sd 0:0:0:0: Attached scsi generic sg0 type 0
mmc0: SDHCI controller on PCI [0000:09:01.1] using DMA
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Asus Laptop ACPI Extras version 0.30
F3Sa model detected, supported
oprofile: using NMI interrupt.
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP probe registered (port=0)
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Bridge firewalling registered
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
CCID: Activated CCID 2 (TCP-like)
CCID: Activated CCID 3 (TCP-Friendly Rate Control)
Using IPI No-Shortcut mode
sda:
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 372k freed
usb 1-2: configuration #1 chosen from 1 choice
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003b5a568]
usb 5-2: new low speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
input: Microsoft Basic Optical Mouse as /class/input/input4
generic-usb 0003:045E:0084.0001: input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-2/input0
PM: Starting manual resume from disk
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
Clocksource tsc unstable (delta = -245269014 ns)
udev[2627]: starting version 164
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 1896 MBytes.
[fglrx] vendor: 1002 device: 9581 count: 1
Linux video capture interface: v2.00
[fglrx] ioport: bar 1, base 0x9000, size: 0x100
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Driver built-in PAT support is enabled successfully
[fglrx] module loaded - fglrx 8.67.4 [Nov 4 2009] with 1 minors
cfg80211: Calling CRDA to update world regulatory domain
stk11xx: Syntek USB2.0 webcam driver startup
stk11xx: Syntek USB2.0 - STK-1135 based webcam found.
stk11xx: Syntek AVStream USB2.0 1.3M WebCam - Product ID 0x6A33.
stk11xx: Release: 0005
stk11xx: Number of interfaces : 1
stk11xx: Initialize USB2.0 Syntek Camera
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds
iwlagn: Copyright(c) 2003-2009 Intel Corporation
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
HDA Intel 0000:00:1b.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
iwlagn 0000:03:00.0: irq 32 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-agn-rs'
stk11xx: Syntek USB2.0 Camera is ready
stk11xx: Syntek USB2.0 Camera is now controlling video device /dev/video0
usbcore: registered new interface driver usb_stk11xx_driver
stk11xx: v2.0.0 : Syntek USB Video Camera
stk11xx: Check device return error (0x0201 = 0C) !
stk11xx: Check device return error (0x0201 = 0C) !
stk11xx: Check device return error (0x0201 = 0C) !
stk11xx: Check device return error (0x0201 = 0C) !
stk11xx: Check device return error (0x0201 = 0C) !
stk11xx: Check device return error (0x0201 = 0C) !
stk11xx: Check device return error (0x0201 = 0C) !
stk11xx: Check device return error (0x0201 = 0C) !
stk11xx: Check device return error (0x0201 = 0C) !
stk11xx: Check device return error (0x0201 = 0C) !
stk11xx: Check device return error (0x0201 = 0C) !
stk11xx: Check device return error (0x0201 = 0C) !
stk11xx: Check device return error (0x0201 = 0C) !
stk11xx: Check device return error (0x0201 = 0C) !
stk11xx: Check device return error (0x0201 = 0C) !
stk11xx: Check device return error (0x0201 = 0C) !
stk11xx: Check device return error (0x0201 = 0C) !
stk11xx: Check device return error (0x0201 = 0C) !
Adding 979956k swap on /dev/sda3. Priority:-1 extents:1 across:979956k
Adding 5855652k swap on /dev/sda8. Priority:-2 extents:1 across:5855652k
EXT3 FS on sda5, internal journal
USB Serial support registered for cp210x
usbcore: registered new interface driver cp210x
cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
USB Serial support registered for Garmin GPS usb/tty
usbcore: registered new interface driver garmin_gps
garmin_gps: v0.33:garmin gps driver
fuse init (API version 7.12)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
/dev/vmmon[3793]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[3793]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
/dev/vmmon[3793]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
/dev/vmmon[3793]: Module vmmon: initialized
/dev/vmci[3801]: VMCI: Driver initialized.
/dev/vmci[3801]: Module vmci: registered with major=10 minor=58
/dev/vmci[3801]: Module vmci: initialized
/dev/vmnet: open called by PID 3884 (vmnet-dhcpd)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 3892 (vmnet-netifup)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 3902 (vmnet-dhcpd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 3918 (vmnet-natd)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 3919 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode
iwlagn 0000:03:00.0: loaded firmware version 228.61.2.24
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
/dev/vmnet: open called by PID 3877 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-wlan0: is a Wireless Adapter
bridge-wlan0: up
ADDRCONF(NETDEV_UP): wlan0: link is not ready
bridge-wlan0: attached
bridge-wlan0: disabling the bridge
bridge-wlan0: down
bridge-wlan0: detached
vmnet1: no IPv6 routers present
wlan0: authenticate with AP e8:39:df:ec:fe:6c
wlan0: authenticated
wlan0: associate with AP e8:39:df:ec:fe:6c
wlan0: RX AssocResp from e8:39:df:ec:fe:6c (capab=0x11 status=0 aid=2)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
/dev/vmnet: open called by PID 3877 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-wlan0: is a Wireless Adapter
bridge-wlan0: up
bridge-wlan0: attached
vmnet8: no IPv6 routers present
bridge-wlan0: disabling the bridge
bridge-wlan0: down
bridge-wlan0: detached
wlan0: no IPv6 routers present
wlan0: authenticate with AP e8:39:df:ec:fe:6c
wlan0: authenticated
wlan0: associate with AP e8:39:df:ec:fe:6c
wlan0: RX ReassocResp from e8:39:df:ec:fe:6c (capab=0x11 status=0 aid=2)
wlan0: associated
/dev/vmnet: open called by PID 3877 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-wlan0: is a Wireless Adapter
bridge-wlan0: up
bridge-wlan0: attached
fglrx_pci 0000:01:00.0: irq 33 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 5940
[fglrx] Gart USWC size:631 M.
[fglrx] Gart cacheable size:248 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fe05000, size:1fb000
[fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
usbcore: registered new interface driver wacom
wacom: v1.51:USB Wacom Graphire and Wacom Intuos tablet driver