rendered paste bodyLinux version 2.6.9-5.0.5ts (machbuild@minbar.tinysofa.org) (gcc version 3.4.3 20050209 (tinysofa 3.4.3-19ts)) #1 Thu Apr 21 10:27:59 EDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS)
BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
62MB HIGHMEM available.
896MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 245488
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 16112 pages, LIFO batch:3
DMI 2.3 present.
ACPI: RSDP (v000 ATi ) @ 0x000f7ed0
ACPI: RSDT (v001 ATi AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bef3040
ACPI: FADT (v001 ATi AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bef30c0
ACPI: MCFG (v001 ATi AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bef6a80
ACPI: MADT (v001 ATi AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bef6980
ACPI: SSDT (v001 ATI Cpu0Ist 0x00003000 INTL 0x20040311) @ 0x3bef6b00
ACPI: SSDT (v001 ATI CpuPm 0x00003000 INTL 0x20040311) @ 0x3bef6f90
ACPI: DSDT (v001 ATI AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Kernel command line: ro root=LABEL=/
Initializing CPU#0
CPU 0 irqstacks, hard=c03e1000 soft=c03e0000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 3002.978 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 969040k/981952k available (2083k kernel code, 12260k reserved, 655k data, 168k init, 64448k highmem)
Calibrating delay loop... 5898.24 BogoMIPS (lpj=2949120)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
checking if image is initramfs... it is
Freeing initrd memory: 485k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 3.00 entry at 0xf1df0, last bus=2
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *12
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11), disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKG] disabled and referenced, BIOS bug.
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:14.1[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Cannot allocate resource region 3 of device 0000:00:00.0
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1160759452.623:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 2FDFD220DA5F147C
- User ID: tinysofa (kernel module gpg key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
ACPI: Fan [FAN] (on)
ACPI: Processor [CPU0] (supports C1, 8 throttling states)
ACPI: Thermal Zone [THRM] (40 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
irq 12: nobody cared! (screaming interrupt?)
irq 12: Please try booting with acpi=off and report a bug
[<c0107ad7>] __report_bad_irq+0x27/0xa0
[<c0107d02>] note_interrupt+0x92/0x140
[<c0107a74>] handle_IRQ_event+0x34/0x70
[<c0107fc5>] do_IRQ+0xe5/0x110
[<c0308c5c>] common_interrupt+0x18/0x20
[<c012381d>] __do_softirq+0x2d/0x90
[<c010864f>] do_softirq+0x4f/0x5e
=======================
[<c0107fcc>] do_IRQ+0xec/0x110
[<c0308c5c>] common_interrupt+0x18/0x20
[<c010843c>] setup_irq+0x7c/0xc0
[<c02289b0>] i8042_interrupt+0x0/0x190
[<c01080ad>] request_irq+0x7d/0xd0
[<c0232a40>] platform_device_release_simple+0x0/0x10
[<c0232ad3>] platform_device_register_simple+0x83/0x100
[<c03c3357>] i8042_check_aux+0x27/0x140
[<c03c3866>] i8042_init+0x106/0x190
[<c03ae813>] do_initcalls+0x53/0xc0
[<c0100430>] init+0x0/0x130
[<c0100430>] init+0x0/0x130
[<c0100455>] init+0x25/0x130
[<c0104298>] kernel_thread_helper+0x0/0x18
[<c010429d>] kernel_thread_helper+0x5/0x18
handlers:
[<c02289b0>] (i8042_interrupt+0x0/0x190)
Disabling IRQ #12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: ASUS CD-S520/A5, ATAPI CD/DVD-ROM drive
Probing IDE interface ide1...
hdc: ST3802110A, ATA DISK drive
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 1024KiB
hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
hdc: cache flushes supported
hdc: hdc1 hdc2 hdc3
hda: ATAPI 52X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
irq 12: nobody cared! (screaming interrupt?)
irq 12: Please try booting with acpi=off and report a bug
[<c0107ad7>] __report_bad_irq+0x27/0xa0
[<c0107d02>] note_interrupt+0x92/0x140
[<c0107a74>] handle_IRQ_event+0x34/0x70
[<c0107fc5>] do_IRQ+0xe5/0x110
[<c0308c5c>] common_interrupt+0x18/0x20
[<c012381d>] __do_softirq+0x2d/0x90
[<c010864f>] do_softirq+0x4f/0x5e
=======================
[<c0107fcc>] do_IRQ+0xec/0x110
[<c0308c5c>] common_interrupt+0x18/0x20
[<c010843c>] setup_irq+0x7c/0xc0
[<c02289b0>] i8042_interrupt+0x0/0x190
[<c01080ad>] request_irq+0x7d/0xd0
[<c0191a7d>] sysfs_make_dirent+0x1d/0x90
[<c02288a9>] i8042_open+0x59/0xe0
[<c0228485>] serio_open+0x15/0x30
[<c028dab2>] atkbd_connect+0x192/0x430
[<c02318d4>] driver_create_file+0x44/0x60
[<c02312ac>] driver_add_attrs+0x4c/0xc0
[<c0227753>] serio_bind_driver+0x23/0x90
[<c0227f2c>] serio_connect_port+0x2c/0x150
[<c0231988>] driver_register+0x28/0x30
[<c02283a9>] serio_register_driver+0x99/0xc0
[<c03c784a>] atkbd_init+0xa/0x10
[<c03ae813>] do_initcalls+0x53/0xc0
[<c0100430>] init+0x0/0x130
[<c0100430>] init+0x0/0x130
[<c0100455>] init+0x25/0x130
[<c0104298>] kernel_thread_helper+0x0/0x18
[<c010429d>] kernel_thread_helper+0x5/0x18
handlers:
[<c02289b0>] (i8042_interrupt+0x0/0x190)
Disabling IRQ #12
input: AT Translated Set 2 keyboard on isa0060/serio0
irq 12: nobody cared! (screaming interrupt?)
irq 12: Please try booting with acpi=off and report a bug
[<c0107ad7>] __report_bad_irq+0x27/0xa0
[<c0107d02>] note_interrupt+0x92/0x140
[<c0107a74>] handle_IRQ_event+0x34/0x70
[<c0107fc5>] do_IRQ+0xe5/0x110
[<c0308c5c>] common_interrupt+0x18/0x20
[<c012381d>] __do_softirq+0x2d/0x90
[<c010864f>] do_softirq+0x4f/0x5e
=======================
[<c0107fcc>] do_IRQ+0xec/0x110
[<c0308c5c>] common_interrupt+0x18/0x20
[<c010843c>] setup_irq+0x7c/0xc0
[<c02289b0>] i8042_interrupt+0x0/0x190
[<c01080ad>] request_irq+0x7d/0xd0
[<c02288a9>] i8042_open+0x59/0xe0
[<c0228485>] serio_open+0x15/0x30
[<c028f07e>] psmouse_connect+0xee/0x300
[<c02318d4>] driver_create_file+0x44/0x60
[<c02312ac>] driver_add_attrs+0x4c/0xc0
[<c0227753>] serio_bind_driver+0x23/0x90
[<c0227f2c>] serio_connect_port+0x2c/0x150
[<c0231988>] driver_register+0x28/0x30
[<c022777f>] serio_bind_driver+0x4f/0x90
[<c02283a9>] serio_register_driver+0x99/0xc0
[<c03c7894>] psmouse_init+0x44/0xb0
[<c02283a9>] serio_register_driver+0x99/0xc0
[<c03ae813>] do_initcalls+0x53/0xc0
[<c0100430>] init+0x0/0x130
[<c0100430>] init+0x0/0x130
[<c0100455>] init+0x25/0x130
[<c0104298>] kernel_thread_helper+0x0/0x18
[<c010429d>] kernel_thread_helper+0x5/0x18
handlers:
[<c02289b0>] (i8042_interrupt+0x0/0x190)
Disabling IRQ #12
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Invalid control/status registers
speedstep-centrino: found unsupported CPU with Enhanced SpeedStep: send /proc/cpuinfo to Jeremy Fitzhardinge <jeremy@goop.org>
cpufreq: CPU0 - ACPI performance management activated.
cpufreq: *P0: 3000 MHz, 22464 mW, 160 uS
cpufreq: P1: 2800 MHz, 22464 mW, 160 uS
ACPI: (supports S0 S3 S4 S5)
ACPI wakeup devices:
PCI0 USB0 USB1 USB2 AZAL P2P PS2K
Freeing unused kernel memory: 168k freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
ACPI: Power Button (FF) [PWRF]
ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: irq 11, pci mem f8822000
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: irq 11, pci mem f8828000
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: irq 11, pci mem f882a000
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
EXT3 FS on hdc2, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
cdrom: open failed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Adding 1959920k swap on /dev/hdc3. Priority:-1 extents:1
cdrom: open failed.
Losing some ticks... checking if CPU frequency changed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Losing some ticks... checking if CPU frequency changed.