rendered paste bodyBootdata ok (command line is root=/dev/sda3)
Linux version 2.6.18-gentoo (root@lesho.intrak.tuke.sk) (gcc version 4.1.1 (Gentoo 4.1.1)) #2 SMP Fri Oct 13 02:33:14 CEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
BIOS-e820: 000000001ffd0000 - 000000001ffde000 (ACPI data)
BIOS-e820: 000000001ffde000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f9b80
ACPI: RSDT (v001 A M I OEMRSDT 0x05000619 MSFT 0x00000097) @ 0x000000001ffd0000
ACPI: FADT (v002 A M I OEMFACP 0x05000619 MSFT 0x00000097) @ 0x000000001ffd0200
ACPI: MADT (v001 A M I OEMAPIC 0x05000619 MSFT 0x00000097) @ 0x000000001ffd0390
ACPI: MCFG (v001 A M I OEMMCFG 0x05000619 MSFT 0x00000097) @ 0x000000001ffd0400
ACPI: SSDT (v001 OEM_ID OEMTBLID 0x00000001 INTL 0x02002026) @ 0x000000001ffd6010
ACPI: OEMB (v001 A M I AMI_OEM 0x05000619 MSFT 0x00000097) @ 0x000000001ffde040
ACPI: DSDT (v001 1ADIJ 1ADIJ000 0x00000000 INTL 0x02002026) @ 0x0000000000000000
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 000000001ffd0000
NUMA: Using 63 for the hash shift.
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-000000001ffd0000
On node 0 totalpages: 127407
DMA zone: 2214 pages, LIFO batch:0
DMA32 zone: 125193 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 17, address 0xfec10000, GSI 24-44
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:df780000)
SMP: Allowing 2 CPUs, 1 hotplug CPUs
Built 1 zonelists. Total pages: 127407
Kernel command line: root=/dev/sda3
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 16384 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2412.115 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Checking aperture...
CPU 0: aperture @ b45a000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 508472k/524096k available (3547k kernel code, 15236k reserved, 2369k data, 224k init)
Calibrating delay using timer specific routine.. 4827.36 BogoMIPS (lpj=9654722)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12563111
Detected 12.563 MHz APIC timer.
Brought up 1 CPUs
testing NMI watchdog ... OK.
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
Error attaching device data
Error attaching device data
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 4000-403f claimed by ali7101 ACPI
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled.
ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15)
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling IOMMU.
PCI: Bridge: 0000:00:01.0
IO window: e000-efff
MEM window: def00000-deffffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:11.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:02.0 to 64
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 39 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:03.0 to 64
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 44 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:11.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
ac.o: No PCI boards found.
ac.o: For an ISA board you must supply memory and irq parameters.
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
vga16fb: initializing
vga16fb: mapped to 0xffff8100000a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: duty_cycle spans bit 4
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x2
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.1.9-k4
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-d (2.4 port) Nov-17-2001 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
GSI 20 sharing vector 0x32 and IRQ 20
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 20 (level, low) -> IRQ 50
eth0: ULi M5263 at pci0000:00:12.0, 00:16:17:16:4c:d0, irq 50.
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 0000:00:16.0
GSI 21 sharing vector 0x3A and IRQ 21
ACPI: PCI Interrupt 0000:00:16.0[A] -> GSI 21 (level, low) -> IRQ 58
ALI15X3: chipset revision 199
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: TOSHIBA DVD-ROM SD-M1912, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006
libata version 2.00 loaded.
ahci 0000:00:16.1: version 2.0
ACPI: PCI Interrupt 0000:00:16.1[A] -> GSI 21 (level, low) -> IRQ 58
ahci 0000:00:16.1: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:16.1: flags: ncq ilck pm led clo pmp pio slum part
ata1: SATA max UDMA/133 cmd 0xFFFFC20000034500 ctl 0x0 bmdma 0x0 irq 58
ata2: SATA max UDMA/133 cmd 0xFFFFC20000034580 ctl 0x0 bmdma 0x0 irq 58
ata3: SATA max UDMA/133 cmd 0xFFFFC20000034600 ctl 0x0 bmdma 0x0 irq 58
ata4: SATA max UDMA/133 cmd 0xFFFFC20000034680 ctl 0x0 bmdma 0x0 irq 58
scsi0 : ahci
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 31/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link down (SStatus 0 SControl 300)
scsi2 : ahci
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
Vendor: ATA Model: ST3160811AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
Fusion MPT base driver 3.04.01
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.01
Fusion MPT SAS Host driver 3.04.01
GSI 22 sharing vector 0x42 and IRQ 22
ACPI: PCI Interrupt 0000:00:13.3[D] -> GSI 23 (level, low) -> IRQ 66
ehci_hcd 0000:00:13.3: EHCI Host Controller
ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.3: debug port 1
ehci_hcd 0000:00:13.3: irq 66, io mem 0xdeeef800
ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
GSI 23 sharing vector 0x4A and IRQ 23
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 17 (level, low) -> IRQ 74
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 74, io mem 0xdeeee000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
GSI 24 sharing vector 0x52 and IRQ 24
ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 18 (level, low) -> IRQ 82
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 82, io mem 0xdeeed000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
GSI 25 sharing vector 0x5A and IRQ 25
ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 19 (level, low) -> IRQ 90
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 90, io mem 0xdeeec000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
USB Universal Host Controller Interface driver v3.0
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
Intel 810 + AC97 Audio, version 1.01, 20:17:35 Oct 12 2006
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
ACPI: (supports S0 S1 S3 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
XFS mounting filesystem sda3
Ending clean XFS mount for filesystem: sda3
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 224k freed
ADDRCONF(NETDEV_UP): eth0: link is not ready
uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 425 MBytes.
[fglrx] module loaded - fglrx 8.29.6 [Sep 19 2006] on minor 0
GSI 26 sharing vector 0x62 and IRQ 26
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 25 (level, low) -> IRQ 98
[fglrx] total GART = 134217728
[fglrx] free GART = 118226944
[fglrx] max single GART = 118226944
[fglrx] total LFB = 260960256
[fglrx] free LFB = 250474496
[fglrx] max single LFB = 250474496
[fglrx] total Inv = 0
[fglrx] free Inv = 0
[fglrx] max single Inv = 0
[fglrx] total TIM = 0
mtrr: no MTRR for c0000000,400000 found
mtrr: no MTRR for c0400000,200000 found
mtrr: no MTRR for c0600000,100000 found
mtrr: no MTRR for c0700000,1000 found
[fglrx] total GART = 134217728
[fglrx] free GART = 118226944
[fglrx] max single GART = 118226944
[fglrx] total LFB = 260960256
[fglrx] free LFB = 250474496
[fglrx] max single LFB = 250474496
[fglrx] total Inv = 0
[fglrx] free Inv = 0
[fglrx] max single Inv = 0
[fglrx] total TIM = 0
mtrr: no MTRR for c0000000,400000 found
mtrr: no MTRR for c0400000,200000 found
mtrr: no MTRR for c0600000,100000 found
mtrr: no MTRR for c0700000,1000 found
[fglrx] total GART = 134217728
[fglrx] free GART = 118226944
[fglrx] max single GART = 118226944
[fglrx] total LFB = 260960256
[fglrx] free LFB = 250474496
[fglrx] max single LFB = 250474496
[fglrx] total Inv = 0
[fglrx] free Inv = 0
[fglrx] max single Inv = 0
[fglrx] total TIM = 0
mtrr: no MTRR for c0000000,400000 found
mtrr: no MTRR for c0400000,200000 found
mtrr: no MTRR for c0600000,100000 found
mtrr: no MTRR for c0700000,1000 found
[fglrx] total GART = 134217728
[fglrx] free GART = 118226944
[fglrx] max single GART = 118226944
[fglrx] total LFB = 260960256
[fglrx] free LFB = 250474496
[fglrx] max single LFB = 250474496
[fglrx] total Inv = 0
[fglrx] free Inv = 0
[fglrx] max single Inv = 0
[fglrx] total TIM = 0
mtrr: no MTRR for c0000000,400000 found
mtrr: no MTRR for c0400000,200000 found
mtrr: no MTRR for c0600000,100000 found
mtrr: no MTRR for c0700000,1000 found
typesconfig[5405]: segfault at 0000000000000000 rip 000000000040104b rsp 00007fff246fcce0 error 4
typesconfig[5406]: segfault at 0000000000000000 rip 0000000000401001 rsp 00007fff246fcce0 error 6
factorial[32669]: segfault at 0000000000020f51 rip 0000000000402fee rsp 00007fff999b0050 error 4
factorial[32672]: segfault at 0000000000020f51 rip 0000000000402fee rsp 00007fffdf6dfd90 error 4
factorial[32675]: segfault at 0000000000020f51 rip 0000000000402fee rsp 00007fff65b321f0 error 4
factorial[32678]: segfault at 0000000000020f51 rip 0000000000402fee rsp 00007fff611ff8c0 error 4
factorial[32681]: segfault at 0000000000020f51 rip 0000000000402fee rsp 00007fff860c5780 error 4
[fglrx] total GART = 134217728
[fglrx] free GART = 118226944
[fglrx] max single GART = 118226944
[fglrx] total LFB = 260960256
[fglrx] free LFB = 250474496
[fglrx] max single LFB = 250474496
[fglrx] total Inv = 0
[fglrx] free Inv = 0
[fglrx] max single Inv = 0
[fglrx] total TIM = 0
mtrr: no MTRR for c0000000,400000 found
mtrr: no MTRR for c0400000,200000 found
mtrr: no MTRR for c0600000,100000 found
mtrr: no MTRR for c0700000,1000 found
[fglrx] total GART = 134217728
[fglrx] free GART = 118226944
[fglrx] max single GART = 118226944
[fglrx] total LFB = 260960256
[fglrx] free LFB = 250474496
[fglrx] max single LFB = 250474496
[fglrx] total Inv = 0
[fglrx] free Inv = 0
[fglrx] max single Inv = 0
[fglrx] total TIM = 0
typesconfig[3307]: segfault at 0000000000000000 rip 000000000040104b rsp 00007fff1235c940 error 4
typesconfig[3308]: segfault at 0000000000000000 rip 0000000000401001 rsp 00007fff1235c940 error 6
mtrr: no MTRR for c0000000,400000 found
mtrr: no MTRR for c0400000,200000 found
mtrr: no MTRR for c0600000,100000 found
mtrr: no MTRR for c0700000,1000 found
[fglrx:firegl_rmmap] *ERROR* map 0xffff81000d9d72d8 still in use (map_count=1)
[fglrx:firegl_free_buffer_queue] *ERROR* buffer queue 0xffff81000d9d72c0 still mapped (user_handle = 0x0003e000)
[fglrx:firegl_rmmap] *ERROR* map 0xffff81000d9d7258 still in use (map_count=1)
[fglrx:firegl_free_buffer_queue] *ERROR* buffer queue 0xffff81000d9d7240 still mapped (user_handle = 0x0003d000)
[fglrx:firegl_rmmap] *ERROR* map 0xffff81000d9d73d8 still in use (map_count=1)
[fglrx:firegl_free_buffer_queue] *ERROR* buffer queue 0xffff81000d9d73c0 still mapped (user_handle = 0x0003c000)
[fglrx] total GART = 134217728
[fglrx] free GART = 118226944
[fglrx] max single GART = 118226944
[fglrx] total LFB = 260960256
[fglrx] free LFB = 250474496
[fglrx] max single LFB = 250474496
[fglrx] total Inv = 0
[fglrx] free Inv = 0
[fglrx] max single Inv = 0
[fglrx] total TIM = 0
mtrr: no MTRR for c0000000,400000 found
mtrr: no MTRR for c0400000,200000 found
mtrr: no MTRR for c0600000,100000 found
mtrr: no MTRR for c0700000,1000 found
[fglrx] total GART = 134217728
[fglrx] free GART = 118226944
[fglrx] max single GART = 118226944
[fglrx] total LFB = 260960256
[fglrx] free LFB = 250474496
[fglrx] max single LFB = 250474496
[fglrx] total Inv = 0
[fglrx] free Inv = 0
[fglrx] max single Inv = 0
[fglrx] total TIM = 0