load -r -v -b 0x600000 vmlinuz-loft-2.6.18
Using default protocol (TFTP)
/
Raw file loaded 0x00600000-0x0071d4c7, assumed entry at 0x00600000
RedBoot> exec
Using base address 0x00600000 and length 0x0011d4c8
Uncompressing Linux.............................................................................. done, booting the kernel.
Linux version 2.6.18 (gs@gw-lap) (gcc version 3.4.4) #4 PREEMPT Thu Oct 12 08:03:29 EDT 2006
CPU: XScale-IXP42x Family [690541c1] revision 1 (ARMv5TE), cr=0000397f
Machine: Giant Shoulder Inc Loft board
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists. Total pages: 16384
Kernel command line: noirqdebug console=ttyS0,115200n8 root=/dev/hda1 rootfstype=ext2 rtc-ds1672.probe=0,0x68 mem=64M@0x0
IRQ lockup detection disabled
PID hash table entries: 512 (order: 9, 2048 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 62396KB available (1968K code, 405K data, 88K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
IXP4xx: Using 16MiB expansion bus window size
PCI: IXP4xx is host
PCI: IXP4xx Using direct access for memory space
PCI: bus0: Fast back to back transfers disabled
dmabounce: registered device 0000:00:05.0 on pci bus
dmabounce: registered device 0000:00:05.1 on pci bus
dmabounce: registered device 0000:00:05.2 on pci bus
SCSI subsystem initialized
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 2048 bind 1024)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
RAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: Gateworks Avila IDE/CF driver v1.3
hda: probing with STATUS(0x50) instead of ALTSTATUS(0x0a)
hda: SanDisk SDCFH-512, CFA DISK drive
hdb: probing with STATUS(0x50) instead of ALTSTATUS(0x0a)
hdb: probing with STATUS(0x51) instead of ALTSTATUS(0x0a)
ide0 at 0xc4850000-0xc4850007,0xc485001e on irq 29
hda: max request size: 128KiB
hda: 1000944 sectors (512 MB) w/1KiB Cache, CHS=993/16/63
hda: hda1
NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0xfe0000
21 RedBoot partitions found on MTD device IXP4XX-Flash.0
Creating 21 MTD partitions on "IXP4XX-Flash.0":
0x00000000-0x01000000 : ""
0x00000000-0x01000000 : ""
0x00000000-0x01000000 : ""
0x00000000-0x01000000 : ""
0x00000000-0x01000000 : ""
0x00000000-0x01000000 : ""
0x00000000-0x01000000 : ""
0x00000000-0x01000000 : ""
0x00000000-0x01000000 : ""
0x00000000-0x01000000 : ""
0x00000000-0x01000000 : ""
0x00000000-0x01000000 : ""
0x00000000-0x01000000 : ""
0x00000000-0x01000000 : "
"
0x00000050-0x00000850 : "RedBoot"
mtd: partition "RedBoot" doesn't start on an erase block boundary -- force read-only
0x00000850-0x00002050 : "zImage"
mtd: partition "zImage" doesn't start on an erase block boundary -- force read-only
0x00002050-0x00004050 : "jffs2"
mtd: partition "jffs2" doesn't start on an erase block boundary -- force read-only
0x0000fe50-0x00f0ff50 : "FIS directory"
mtd: partition "FIS directory" doesn't start on an erase block boundary -- force read-only
0x00130128-0x6f766097 : ". ."
mtd: partition ". ." extends beyond the end of device "IXP4XX-Flash.0" -- size truncated to 0xecfed8
mtd: partition ". ." doesn't start on an erase block boundary -- force read-only
0x0063735f-0x0163735f : ""
mtd: partition "" extends beyond the end of device "IXP4XX-Flash.0" -- size truncated to 0x9c8ca1
mtd: partition "" doesn't start on an erase block boundary -- force read-only
0x00f0ff50-0x0100ff50 : "RedBoot config"
mtd: partition "RedBoot config" extends beyond the end of device "IXP4XX-Flash.0" -- size truncated to 0xf00b0
mtd: partition "RedBoot config" doesn't start on an erase block boundary -- force read-only
i2c /dev entries driver
: oscillator started; SET TIME!
ds1672 0-0068: chip found, driver version 0.3
ds1672 0-0068: rtc intf: sysfs
ds1672 0-0068: rtc intf: proc
ds1672 0-0068: rtc intf: dev (254:0)
ds1672 0-0068: rtc core: registered ds1672 as rtc0
TCP bic registered
NET: Registered protocol family 1
ds1672 0-0068: setting the system clock to 2006-10-12 11:50:24 (1160653824)
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 88K
INIT: version 2.86 booting
Activating swap.
Checking root file system...
fsck 1.37 (21-Mar-2005)
/dev/hda1: clean, 13456/125488 files, 343953/500432 blocks
System time was Thu Oct 12 11:50:32 UTC 2006.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. System local time is now Thu Oct 12 11:50:34 UTC 2006.
Cleaning up ifupdown...done.
Calculating module dependencies... done.
Loading modules...
ixp400_eth
FATAL: Module ixp400_eth not found.
ath_pci
FATAL: Module ath_pci not found.
mct_u232
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for MCT U232
usbcore: registered new driver mct_u232
drivers/usb/serial/mct_u232.c: Magic Control Technology USB-RS232 converter driver z2.0
pl2303
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
usbcore: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
All modules loaded.
Checking all file systems...
fsck 1.37 (21-Mar-2005)
Setting kernel variables ...
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.all.log_martians = 1
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.all.accept_redirects = 0
error: 'net.ipv4.tcp_syncookies' is an unknown key
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.ip_forward = 1
... done.
Mounting local filesystems...
usbfs on /proc/bus/usb type usbfs (rw)
tmpfs on /tmp type tmpfs (rw,noatime)
Cleaning /tmp /var/run /var/lock.
Setting sensors limits: done.
Running 0dns-down to make sure resolv.conf is ok...done.
Setting up networking...done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces...Internet Software Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
eth0: ERROR while getting interface flags: No such device
NET: Registered protocol family 17
Bind socket to interface: No such device
exiting.
Failed to bring up eth0.
SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
eth1: ERROR while getting interface flags: No such device
Failed to bring up eth1.
done.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. Local time: Thu Oct 12 11:50:42 UTC 2006
Running ntpdate to synchronize clockError : Temporary failure in name resolution
.
Initializing random number generator...done.
Recovering nvi editor sessions... done.
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting DNS forwarder and DHCP server: dnsmasqNET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
.
Starting MTA: exim4.
Starting internet superserver: inetd.
Starting OpenBSD Secure Shell server: sshd.
Starting web server: thttpd.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: cron.
Starting gpslog server: stty: /dev/ttyUSB0: No such device
Debian GNU/Linux 3.1 Avila ttyS0
built by Giant Shoulder, Inc. http://www.giantshoulderinc.com Avila ttyS0
Avila login: root
Password:
Linux Avila 2.6.18 #4 PREEMPT Thu Oct 12 08:03:29 EDT 2006 armv5tel GNU/Linux
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Avila:~# uname -a
Linux Avila 2.6.18 #4 PREEMPT Thu Oct 12 08:03:29 EDT 2006 armv5tel GNU/Linux