rendered paste bodyLinux version 2.6.17-fai-kernels (Version:) (buildd@ninsei) (gcc version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #1 SMP Mon Sep 11 21:47:57 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f52f0
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32752 pages, LIFO batch:7
DMI 2.3 present.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 15:15 APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists
Kernel command line: ip=dhcp FAI_ACTION=install root=/dev/nfs nfsroot=/srv/fai/nfsroot,v3,tcp,rsize=32768,wsize=32768 FAI_FLAGS=
verbose,sshd,createvt BOOT_IMAGE=vmlinuz-install
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2411.284 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1036152k/1048512k available (1688k kernel code, 11756k reserved, 634k data, 156k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4827.39 BogoMIPS (lpj=9654796)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
CPU0: AMD Athlon(tm) 64 Processor 3800+ stepping 02
Total of 1 processors activated (4827.39 BogoMIPS).
ExtINT not setup in hardware but reported by MP table
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ...works.
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
PCI: PCI BIOS revision 3.00 entry at 0xfb620, last bus=5
Setting up standard PCI resources
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
Boot video device is 0000:05:00.0
PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 10
PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 10
PCI->APIC IRQ transform: 0000:01:06.0[A] -> IRQ 10
PCI->APIC IRQ transform: 0000:01:07.0[A] -> IRQ 3
PCI->APIC IRQ transform: 0000:05:00.0[A] -> IRQ 5
PCI: Bridge: 0000:00:09.0
IO window: d000-dfff
MEM window: fdf00000-fdffffff
PREFETCH window: f8000000-fbffffff
PCI: Bridge: 0000:00:0b.0
IO window: c000-cfff
MEM window: fde00000-fdefffff
PREFETCH window: fdd00000-fddfffff
PCI: Bridge: 0000:00:0c.0
IO window: b000-bfff
MEM window: fdc00000-fdcfffff
PREFETCH window: fdb00000-fdbfffff
PCI: Bridge: 0000:00:0d.0
IO window: a000-afff
MEM window: fda00000-fdafffff
PREFETCH window: fd900000-fd9fffff
PCI: Bridge: 0000:00:0e.0
IO window: 9000-9fff
MEM window: d8000000-dfffffff
PREFETCH window: c0000000-cfffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
highmem bounce pool size: 64 pages
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Intel(R) PRO/1000 Network Driver - version 7.0.33-k2
Copyright (c) 1999-2005 Intel Corporation.
pcnet32.c:v1.32 18.Mar.2006 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 01462:7185 bound to 0000:00:0a.0
r8169 Gigabit Ethernet driver 2.2LK loaded
eth1: Identified chip type is 'RTL8169s/8110s'.
eth1: RTL8169 at 0xf881c000, 00:30:4f:4e:6f:41, IRQ 10
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-d (2.4 port) Nov-17-2001 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input0
eth0: no link during initialization.
r8169: eth1: link down
Sending DHCP requests .<6>eth0: link up.
., OK
IP-Config: Got DHCP answer from 10.1.1.51, my address is 10.1.1.52
IP-Config: Complete:
device=eth0, addr=10.1.1.52, mask=255.255.255.0, gw=10.1.1.51,
host=client, domain=fai, nis-domain=(none),
bootserver=10.1.1.51, rootserver=10.1.1.51, rootpath=
Looking up port of RPC 100003/3 on 10.1.1.51
Looking up port of RPC 100005/3 on 10.1.1.51
VFS: Mounted root (nfs filesystem) readonly.
Freeing unused kernel memory: 156k freed
Warning: unable to open an initial console.
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0xfb00-0xfb07, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: TSSTcorp CD-ROM SH-C522C, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
Real Time Clock Driver v1.12ac
floppy0: no floppy controllers found
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
hda: ATAPI 52X CD-ROM drive, 96kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
Probing IDE interface ide1...
SCSI subsystem initialized
Fusion MPT base driver 3.03.09
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.09
libata version 1.20 loaded.
eth0: no IPv6 routers present