Lecture des listes de paquets...Construction de l'arbre des dépendances...Lecture des informations d'état...Lecture de l'information d'état étendu...Initialisation de l'état des paquets...Les NOUVEAUX paquets suivants vont être installés : libsensors4{a} lm-sensors 0 paquets mis à jour, 2 nouvellement installés, 0 à enlever et 0 non mis à jour.Il est nécessaire de télécharger 188ko d'archives. Après dépaquetage, 782ko seront utilisés.Écriture de l'information d'état étendu...Prendre :1 http://fr.archive.ubuntu.com karmic/main libsensors4 1:3.0.2-2ubuntu4 [63,0kB]Prendre :2 http://fr.archive.ubuntu.com karmic/main lm-sensors 1:3.0.2-2ubuntu4 [125kB]188ko téléchargés en 0s (481ko/s)Sélection du paquet libsensors4 précédemment désélectionné.
(Lecture de la base de données...
(Lecture de la base de données... 5%
(Lecture de la base de données... 10%
(Lecture de la base de données... 15%
(Lecture de la base de données... 20%
(Lecture de la base de données... 25%
(Lecture de la base de données... 30%
(Lecture de la base de données... 35%
(Lecture de la base de données... 40%
(Lecture de la base de données... 45%
(Lecture de la base de données... 50%
(Lecture de la base de données... 55%
(Lecture de la base de données... 60%
(Lecture de la base de données... 65%
(Lecture de la base de données... 70%
(Lecture de la base de données... 75%
(Lecture de la base de données... 80%
(Lecture de la base de données... 85%
(Lecture de la base de données... 90%
(Lecture de la base de données... 95%
(Lecture de la base de données... 100%
(Lecture de la base de données... 87588 fichiers et répertoires déjà installés.)
Dépaquetage de libsensors4 (à partir de .../libsensors4_1%3a3.0.2-2ubuntu4_i386.deb) ...
Sélection du paquet lm-sensors précédemment désélectionné.
Dépaquetage de lm-sensors (à partir de .../lm-sensors_1%3a3.0.2-2ubuntu4_i386.deb) ...
Traitement des actions différées (« triggers ») pour « man-db »...
Paramétrage de libsensors4 (1:3.0.2-2ubuntu4) ...
.udevdb or .udev presence implies active udev. Aborting MAKEDEV invocation.
Creating config file /etc/sensors3.conf with new version
Paramétrage de lm-sensors (1:3.0.2-2ubuntu4) ...
Traitement des actions différées (« triggers ») pour « libc-bin »...
ldconfig deferred processing now taking place
Lecture des listes de paquets...Construction de l'arbre des dépendances...Lecture des informations d'état...Lecture de l'information d'état étendu...Initialisation de l'état des paquets...Écriture de l'information d'état étendu...Lecture des listes de paquets...Construction de l'arbre des dépendances...Lecture des informations d'état...Lecture de l'information d'état étendu...Initialisation de l'état des paquets...Les NOUVEAUX paquets suivants vont être installés : linux-source linux-source-2.6.31{a} 0 paquets mis à jour, 2 nouvellement installés, 0 à enlever et 0 non mis à jour.Il est nécessaire de télécharger 63,1Mo d'archives. Après dépaquetage, 63,3Mo seront utilisés.Écriture de l'information d'état étendu...Err http://fr.archive.ubuntu.com karmic-updates/main linux-source-2.6.31 2.6.31-22.65 404 Not FoundPrendre :1 http://fr.archive.ubuntu.com karmic-updates/main linux-source 2.6.31.22.35 [3 438B]Err http://security.ubuntu.com karmic-security/main linux-source-2.6.31 2.6.31-22.65 404 Not Found [IP : 91.189.92.167 80]3 438o téléchargés en 0s (14,5ko/s)Lecture des listes de paquets...Construction de l'arbre des dépendances...Lecture des informations d'état...Lecture de l'information d'état étendu...Initialisation de l'état des paquets...Écriture de l'information d'état étendu...Lecture des listes de paquets...Construction de l'arbre des dépendances...Lecture des informations d'état...Lecture de l'information d'état étendu...Initialisation de l'état des paquets...Écriture de l'information d'état étendu...Aucun paquet ne va être installé, mis à jour ou enlevé.0 paquets mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.Il est nécessaire de télécharger 0o d'archives. Après dépaquetage, 0o seront utilisés.Écriture de l'information d'état étendu...Lecture des listes de paquets...Construction de l'arbre des dépendances...Lecture des informations d'état...Lecture de l'information d'état étendu...Initialisation de l'état des paquets...bzip2: Compressed file ends unexpectedly; perhaps it is corrupted? *Possible* reason follows.bzip2: Invalid argument Input file = (stdin), output file = (stdout)It is possible that the compressed file(s) have become corrupted.You can use the -tvv option to test integrity of such files.You can use the `bzip2recover' program to attempt to recoverdata from undamaged sections of corrupted files.tar: Child returned status 2tar: Arrêt avec code d'échec à cause des erreurs précédentesmake: entrant dans le répertoire « /usr/src/linux-headers-2.6.31-22-generic »make: quittant le répertoire « /usr/src/linux-headers-2.6.31-22-generic »# sensors-detect revision 5842 (2010-06-19 21:47:45 +0200)# System: To Be Filled By O.E.M. To Be Filled By O.E.M.# Board: To be filled by O.E.M. To be filled by O.E.M.This program will help you determine which kernel modules you needto load to use lm_sensors most effectively. It is generally safeand recommended to accept the default answers to all questions,unless you know what you're doing.Some south bridges, CPUs or memory controllers contain embedded sensors.Do you want to scan for them? This is totally safe. (YES/no): Silicon Integrated Systems SIS5595... NoVIA VT82C686 Integrated Sensors... NoVIA VT8231 Integrated Sensors... NoAMD K8 thermal sensors... NoAMD Family 10h thermal sensors... NoAMD Family 11h thermal sensors... NoIntel Core family thermal sensor... NoIntel Atom thermal sensor... Success! (driver `coretemp')Intel AMB FB-DIMM thermal sensor... NoVIA C7 thermal sensor... NoVIA Nano thermal sensor... NoSome Super I/O chips contain embedded sensors. We have to write tostandard I/O ports to probe them. This is usually safe.Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2fTrying family `National Semiconductor'... NoTrying family `SMSC'... NoTrying family `VIA/Winbond/Nuvoton/Fintek'... NoTrying family `ITE'... NoProbing for Super-I/O at 0x4e/0x4fTrying family `National Semiconductor'... NoTrying family `SMSC'... NoTrying family `VIA/Winbond/Nuvoton/Fintek'... NoTrying family `ITE'... NoSome systems (mainly servers) implement IPMI, a set of common interfacesthrough which system health data may be retrieved, amongst other things.We first try to get the information from SMBIOS. If we don't find itthere, we have to read from arbitrary I/O ports to probe for suchinterfaces. This is normally safe. Do you want to scan for IPMIinterfaces? (YES/no): Probing for `IPMI BMC KCS' at 0xca0... NoProbing for `IPMI BMC SMIC' at 0xca8... NoSome hardware monitoring chips are accessible through the ISA I/O ports.We have to write to arbitrary I/O ports to probe them. This is usuallysafe though. Yes, you do have ISA I/O ports even if you do not have anyISA slots! Do you want to scan the ISA I/O ports? (YES/no): Probing for `National Semiconductor LM78' at 0x290... NoProbing for `National Semiconductor LM79' at 0x290... NoProbing for `Winbond W83781D' at 0x290... NoProbing for `Winbond W83782D' at 0x290... NoLastly, we can probe the I2C/SMBus adapters for connected hardwaremonitoring devices. This is the most risky part, and while it worksreasonably well on most systems, it has been reported to cause troubleon some systems.Do you want to probe the I2C/SMBus adapters now? (YES/no): Using driver `i2c-nforce2' for device 0000:00:03.2: nVidia Corporation nForce SMBus (MCP79)Module i2c-dev loaded successfully.Next adapter: SMBus nForce2 adapter at 4d00 (i2c-0)Do you want to scan it? (YES/no/selectively): Client found at address 0x4cProbing for `National Semiconductor LM75'... NoProbing for `Dallas Semiconductor DS75'... NoProbing for `Analog Devices ADT7466'... NoProbing for `Andigilog aSC7511'... NoProbing for `Dallas Semiconductor DS1621/DS1631'... NoProbing for `Analog Devices ADM1021'... NoProbing for `Analog Devices ADM1021A/ADM1023'... NoProbing for `Maxim MAX1617'... NoProbing for `Maxim MAX1617A'... NoProbing for `Maxim MAX1668'... NoProbing for `Maxim MAX1805'... NoProbing for `Maxim MAX1989'... NoProbing for `Maxim MAX6655/MAX6656'... NoProbing for `TI THMC10'... NoProbing for `National Semiconductor LM84'... NoProbing for `Genesys Logic GL523SM'... NoProbing for `Onsemi MC1066'... NoProbing for `Maxim MAX1618'... NoProbing for `Maxim MAX1619'... NoProbing for `National Semiconductor LM82/LM83'... NoProbing for `National Semiconductor LM90'... NoProbing for `National Semiconductor LM89/LM99'... NoProbing for `National Semiconductor LM86'... NoProbing for `Analog Devices ADM1032'... NoProbing for `Maxim MAX6654/MAX6690'... NoProbing for `Maxim MAX6657/MAX6658/MAX6659'... NoProbing for `Maxim MAX6648/MAX6649/MAX6692'... NoProbing for `Maxim MAX6680/MAX6681'... NoProbing for `Winbond W83L771W/G'... NoProbing for `Winbond W83L771AWG/ASG'... Success! (confidence 6, driver `lm90')Probing for `Texas Instruments TMP401'... NoProbing for `Texas Instruments TMP411'... NoProbing for `Texas Instruments TMP421'... NoProbing for `Texas Instruments TMP422'... NoProbing for `Texas Instruments TMP423'... NoProbing for `Texas Instruments AMC6821'... NoProbing for `National Semiconductor LM63'... NoProbing for `Fintek F75363SG'... NoProbing for `National Semiconductor LM73'... NoProbing for `Maxim MAX6633/MAX6634/MAX6635'... NoProbing for `Analog Devices ADT7461'... NoProbing for `Analog Devices ADT7481'... NoProbing for `Fintek F75383S/M'... NoProbing for `SMSC EMC1403'... NoProbing for `SMSC EMC1404'... NoClient found at address 0x4eProbing for `National Semiconductor LM75'... NoProbing for `Dallas Semiconductor DS75'... NoProbing for `Dallas Semiconductor DS1621/DS1631'... NoProbing for `Analog Devices ADM1021'... NoProbing for `Analog Devices ADM1021A/ADM1023'... NoProbing for `Maxim MAX1617'... NoProbing for `Maxim MAX1617A'... NoProbing for `Maxim MAX1668'... NoProbing for `Maxim MAX1805'... NoProbing for `Maxim MAX1989'... NoProbing for `Maxim MAX6655/MAX6656'... NoProbing for `TI THMC10'... NoProbing for `National Semiconductor LM84'... NoProbing for `Genesys Logic GL523SM'... NoProbing for `Onsemi MC1066'... NoProbing for `Maxim MAX1618'... NoProbing for `Maxim MAX1619'... NoProbing for `National Semiconductor LM82/LM83'... NoProbing for `Maxim MAX6654/MAX6690'... NoProbing for `Maxim MAX6659'... NoProbing for `Maxim MAX6647'... NoProbing for `Maxim MAX6680/MAX6681'... NoProbing for `Texas Instruments TMP411'... NoProbing for `Texas Instruments TMP421'... NoProbing for `Texas Instruments TMP422'... NoProbing for `Texas Instruments AMC6821'... NoProbing for `National Semiconductor LM64'... NoProbing for `National Semiconductor LM73'... NoProbing for `Maxim MAX6633/MAX6634/MAX6635'... NoProbing for `Fintek F75121R/F75122R/RG (VID+GPIO)'... NoProbing for `Fintek F75111R/RG/N (GPIO)'... NoProbing for `ITE IT8201R/IT8203R/IT8206R/IT8266R'... Yes (confidence 6, not a hardware monitoring chip)Client found at address 0x50Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoProbing for `EDID EEPROM'... NoClient found at address 0x51Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoClient found at address 0x52Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoClient found at address 0x53Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoNow follows a summary of the probes I have just done.Just press ENTER to continue: Driver `coretemp': * Chip `Intel Atom thermal sensor' (confidence: 9)Driver `lm90': * Bus `SMBus nForce2 adapter at 4d00' Busdriver `i2c_nforce2', I2C address 0x4c Chip `Winbond W83L771AWG/ASG' (confidence: 6)Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensorsfor initialization at boot time.You should now start the lm_sensors service to load the requiredkernel modules.Unloading i2c-dev... OK * Setting sensors limits ...done.Lecture des listes de paquets...Construction de l'arbre des dépendances...Lecture des informations d'état...Lecture de l'information d'état étendu...Initialisation de l'état des paquets...Les NOUVEAUX paquets suivants vont être installés : autoconf{a} automake autotools-dev{a} m4{a} 0 paquets mis à jour, 4 nouvellement installés, 0 à enlever et 0 non mis à jour.Il est nécessaire de télécharger 1 421ko d'archives. Après dépaquetage, 4 649ko seront utilisés.Écriture de l'information d'état étendu...Prendre :1 http://fr.archive.ubuntu.com karmic/main m4 1.4.13-2 [241kB]Prendre :2 http://fr.archive.ubuntu.com karmic/main autoconf 2.64-1ubuntu1 [558kB]Prendre :3 http://fr.archive.ubuntu.com karmic/main autotools-dev 20090427.1 [63,7kB]Prendre :4 http://fr.archive.ubuntu.com karmic/main automake 1:1.11-1 [559kB]1 421ko téléchargés en 11s (125ko/s)Sélection du paquet m4 précédemment désélectionné.
(Lecture de la base de données...
(Lecture de la base de données... 5%
(Lecture de la base de données... 10%
(Lecture de la base de données... 15%
(Lecture de la base de données... 20%
(Lecture de la base de données... 25%
(Lecture de la base de données... 30%
(Lecture de la base de données... 35%
(Lecture de la base de données... 40%
(Lecture de la base de données... 45%
(Lecture de la base de données... 50%
(Lecture de la base de données... 55%
(Lecture de la base de données... 60%
(Lecture de la base de données... 65%
(Lecture de la base de données... 70%
(Lecture de la base de données... 75%
(Lecture de la base de données... 80%
(Lecture de la base de données... 85%
(Lecture de la base de données... 90%
(Lecture de la base de données... 95%
(Lecture de la base de données... 100%
(Lecture de la base de données... 87654 fichiers et répertoires déjà installés.)
Dépaquetage de m4 (à partir de .../archives/m4_1.4.13-2_i386.deb) ...
Sélection du paquet autoconf précédemment désélectionné.
Dépaquetage de autoconf (à partir de .../autoconf_2.64-1ubuntu1_all.deb) ...
Sélection du paquet autotools-dev précédemment désélectionné.
Dépaquetage de autotools-dev (à partir de .../autotools-dev_20090427.1_all.deb) ...
Sélection du paquet automake précédemment désélectionné.
Dépaquetage de automake (à partir de .../automake_1%3a1.11-1_all.deb) ...
Traitement des actions différées (« triggers ») pour « install-info »...
Traitement des actions différées (« triggers ») pour « man-db »...
Paramétrage de m4 (1.4.13-2) ...
Paramétrage de autoconf (2.64-1ubuntu1) ...
Ignoring install-info called from maintainer script
The package autoconf should be rebuild with new debhelper to get trigger support
Ignoring install-info called from maintainer script
The package autoconf should be rebuild with new debhelper to get trigger support
Ignoring install-info called from maintainer script
The package autoconf should be rebuild with new debhelper to get trigger support
Paramétrage de autotools-dev (20090427.1) ...
Paramétrage de automake (1:1.11-1) ...
update-alternatives: utilisation de « /usr/bin/automake-1.11 » pour fournir « /usr/bin/automake » (automake) dans mode automatique.
Lecture des listes de paquets...Construction de l'arbre des dépendances...Lecture des informations d'état...Lecture de l'information d'état étendu...Initialisation de l'état des paquets...Écriture de l'information d'état étendu...U nvclock/.cvsignoreU nvclock/ABOUTU nvclock/AUTHORSU nvclock/COPYINGU nvclock/ChangeLogU nvclock/FAQU nvclock/INSTALLU nvclock/Makefile.inU nvclock/NEWSU nvclock/READMEU nvclock/acinclude.m4U nvclock/autogen.shU nvclock/config.h.inU nvclock/configureU nvclock/configure.inU nvclock/install-shU nvclock/nvclock.1U nvclock/nvclock.desktopU nvclock/nvclock.pngU nvclock/src/.cvsignoreU nvclock/src/Makefile.inU nvclock/src/nvclock.cU nvclock/src/smartdimmer.cU nvclock/src/backend/MakefileU nvclock/src/backend/Makefile.inU nvclock/src/backend/adt7473.cU nvclock/src/backend/back_bsd.cU nvclock/src/backend/back_linux.cU nvclock/src/backend/back_solaris.cU nvclock/src/backend/back_win32.cU nvclock/src/backend/backend.cU nvclock/src/backend/backend.hU nvclock/src/backend/bios.cU nvclock/src/backend/config.cU nvclock/src/backend/error.cU nvclock/src/backend/f75375.cU nvclock/src/backend/f75375.hU nvclock/src/backend/i2c.cU nvclock/src/backend/i2c.hU nvclock/src/backend/info.cU nvclock/src/backend/libc_wrapper.cU nvclock/src/backend/lm99.cU nvclock/src/backend/nv30.cU nvclock/src/backend/nv40.cU nvclock/src/backend/nv50.cU nvclock/src/backend/nvclock.hU nvclock/src/backend/nvcontrol.cU nvclock/src/backend/nvreg.hU nvclock/src/backend/overclock.cU nvclock/src/backend/utils.cU nvclock/src/backend/w83781d.cU nvclock/src/backend/w83l785r.cU nvclock/src/backend/xf86i2c.cU nvclock/src/backend/xf86i2c.hU nvclock/src/backend/xfree.hU nvclock/src/gtk/.cvsignoreU nvclock/src/gtk/Makefile.inU nvclock/src/gtk/banner.cU nvclock/src/gtk/banner.hU nvclock/src/gtk/banner_gl.hU nvclock/src/gtk/banner_hw.hU nvclock/src/gtk/gl.cU nvclock/src/gtk/gl.hU nvclock/src/gtk/hw.cU nvclock/src/gtk/hw.hU nvclock/src/gtk/interface.hU nvclock/src/gtk/main.cU nvclock/src/gtk/settings.cU nvclock/src/gtk/settings.hU nvclock/src/nvcontrol/Makefile.inU nvclock/src/nvcontrol/libnvcontrol.cU nvclock/src/nvcontrol/libnvcontrol.hU nvclock/src/nvcontrol/nvcontrol.cU nvclock/src/nvcontrol/nvcontrol.hU nvclock/src/qt/.cvsignoreU nvclock/src/qt/Makefile.inU nvclock/src/qt/links.xpmU nvclock/src/qt/main.cppU nvclock/src/qt/nv.xpmU nvclock/src/qt/people.xpmU nvclock/src/qt/qt_nvclock.cppU nvclock/src/qt/qt_nvclock.hU nvclock/src/qt/qt_nvclock.proU nvclock/src/qt/qt_xfree.cppU nvclock/src/qt/qt_xfree.hU nvclock/src/qt/x.xpmchecking for gcc... gccchecking for C compiler default output file name... a.outchecking whether the C compiler works... yeschecking whether we are cross compiling... nochecking for suffix of executables... checking for suffix of object files... ochecking whether we are using the GNU C compiler... yeschecking whether gcc accepts -g... yeschecking for gcc option to accept ISO C89... none neededchecking for g++... g++checking whether we are using the GNU C++ compiler... yeschecking whether g++ accepts -g... yeschecking for a BSD-compatible install... /usr/bin/install -cchecking whether make sets $(MAKE)... yeschecking how to run the C preprocessor... gcc -Echecking for grep that handles long lines and -e... /bin/grepchecking for egrep... /bin/grep -Echecking for ANSI C header files... yeschecking for library containing getopt_long... none requiredchecking for sys/types.h... yeschecking for sys/stat.h... yeschecking for stdlib.h... yeschecking for string.h... yeschecking for memory.h... yeschecking for strings.h... yeschecking for inttypes.h... yeschecking for stdint.h... yeschecking for unistd.h... yeschecking getopt.h usability... yeschecking getopt.h presence... yeschecking for getopt.h... yeschecking for pkg-config... no*** The pkg-config script could not be found. Make sure it is*** in your path, or set the PKG_CONFIG environment variable*** to the full path to pkg-config.*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config.configure: creating ./config.statusconfig.status: creating src/Makefileconfig.status: creating src/backend/Makefileconfig.status: creating src/nvcontrol/Makefileconfig.status: creating src/qt/Makefileconfig.status: creating src/gtk/Makefileconfig.status: creating Makefileconfig.status: creating config.hconfig.status: executing default-1 commandsNVClock build summary:----------------------- Commandline version enabled- NV-CONROL support disabled- GTK2 GUI disabled- QT GUI disabledmake -C src allmake[1]: entrant dans le répertoire « /usr/local/src/nvclock/src »make[2]: entrant dans le répertoire « /usr/local/src/nvclock/src/backend »gcc -O0 -I../.. -I../nvcontrol -c -o backend.o backend.cgcc -O0 -I../.. -I../nvcontrol -c -o bios.o bios.cgcc -O0 -I../.. -I../nvcontrol -c -o config.o config.cgcc -O0 -I../.. -I../nvcontrol -c -o error.o error.cgcc -O0 -I../.. -I../nvcontrol -c -o nv30.o nv30.cgcc -O0 -I../.. -I../nvcontrol -c -o nv40.o nv40.cgcc -O0 -I../.. -I../nvcontrol -c -o nv50.o nv50.cgcc -O0 -I../.. -I../nvcontrol -c -o info.o info.cgcc -O0 -I../.. -I../nvcontrol -c -o overclock.o overclock.cgcc -O0 -I../.. -I../nvcontrol -c -o utils.o utils.cgcc -O0 -I../.. -I../nvcontrol -c -o i2c.o i2c.cgcc -O0 -I../.. -I../nvcontrol -c -o xf86i2c.o xf86i2c.cgcc -O0 -I../.. -I../nvcontrol -c -o adt7473.o adt7473.cgcc -O0 -I../.. -I../nvcontrol -c -o f75375.o f75375.cgcc -O0 -I../.. -I../nvcontrol -c -o lm99.o lm99.cgcc -O0 -I../.. -I../nvcontrol -c -o w83781d.o w83781d.cgcc -O0 -I../.. -I../nvcontrol -c -o w83l785r.o w83l785r.cgcc -O0 -I../.. -I../nvcontrol -c -o libc_wrapper.o libc_wrapper.cgcc -O0 -I../.. -I../nvcontrol -c -o back_linux.o back_linux.car cru libbackend.a backend.o bios.o config.o error.o nv30.o nv40.o nv50.o info.o overclock.o utils.o i2c.o xf86i2c.o adt7473.o f75375.o lm99.o w83781d.o w83l785r.o libc_wrapper.o back_linux.oranlib libbackend.amake[2]: quittant le répertoire « /usr/local/src/nvclock/src/backend »make[2]: entrant dans le répertoire « /usr/local/src/nvclock/src/nvcontrol »make[2]: Rien à faire pour « all ».make[2]: quittant le répertoire « /usr/local/src/nvclock/src/nvcontrol »make[2]: entrant dans le répertoire « /usr/local/src/nvclock/src/gtk »make[2]: Rien à faire pour « all ».make[2]: quittant le répertoire « /usr/local/src/nvclock/src/gtk »make[2]: entrant dans le répertoire « /usr/local/src/nvclock/src/qt »make[2]: Rien à faire pour « all ».make[2]: quittant le répertoire « /usr/local/src/nvclock/src/qt »gcc -g -O2 -o nvclock nvclock.c -I./backend -I./nvcontrol -I.. -L./backend -lbackendgcc -g -O2 -o smartdimmer smartdimmer.c -I./backend -I./nvcontrol -I.. -L./backend -lbackendmake[1]: quittant le répertoire « /usr/local/src/nvclock/src »installing ABOUT as /usr/local/share/doc//ABOUTinstalling AUTHORS as /usr/local/share/doc//AUTHORSinstalling ChangeLog as /usr/local/share/doc//ChangeLoginstalling FAQ as /usr/local/share/doc//FAQinstalling README as /usr/local/share/doc//READMEmkdir -p /usr/local/share/man/man1cp nvclock.1 /usr/local/share/man/man1mkdir -p /usr/local/share/applicationsmkdir -p /usr/local/share/icons/hicolor/48x48/appscp nvclock.desktop /usr/local/share/applicationscp nvclock.png /usr/local/share/icons/hicolor/48x48/appsmake -C src installmake[1]: entrant dans le répertoire « /usr/local/src/nvclock/src »make[2]: entrant dans le répertoire « /usr/local/src/nvclock/src/backend »make[2]: Rien à faire pour « install ».make[2]: quittant le répertoire « /usr/local/src/nvclock/src/backend »make[2]: entrant dans le répertoire « /usr/local/src/nvclock/src/nvcontrol »make[2]: Rien à faire pour « install ».make[2]: quittant le répertoire « /usr/local/src/nvclock/src/nvcontrol »make[2]: entrant dans le répertoire « /usr/local/src/nvclock/src/gtk »make[2]: Rien à faire pour « install ».make[2]: quittant le répertoire « /usr/local/src/nvclock/src/gtk »make[2]: entrant dans le répertoire « /usr/local/src/nvclock/src/qt »make[2]: Rien à faire pour « install ».make[2]: quittant le répertoire « /usr/local/src/nvclock/src/qt »mkdir -p /usr/local/bin/usr/bin/install -c -c nvclock /usr/local/bin/nvclock/usr/bin/install -c -c smartdimmer /usr/local/bin/smartdimmermake[1]: quittant le répertoire « /usr/local/src/nvclock/src »