Reading package lists...Building dependency tree...Reading state information...Initializing package states...Writing extended state information...No packages will be installed, upgraded, or removed.0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.Need to get 0B of archives. After unpacking 0B will be used.Writing extended state information...Reading package lists...Building dependency tree...Reading state information...Reading extended state information...Initializing package states...# sensors-detect revision 5842 (2010-06-19 21:47:45 +0200)# System: nVidia MCP79# Board: To be filled by O.E.M. To be filled by O.E.M.This program will help you determine which kernel modules you needto load to use lm_sensors most effectively. It is generally safeand recommended to accept the default answers to all questions,unless you know what you're doing.Some south bridges, CPUs or memory controllers contain embedded sensors.Do you want to scan for them? This is totally safe. (YES/no): Silicon Integrated Systems SIS5595... NoVIA VT82C686 Integrated Sensors... NoVIA VT8231 Integrated Sensors... NoAMD K8 thermal sensors... NoAMD Family 10h thermal sensors... NoAMD Family 11h thermal sensors... NoIntel Core family thermal sensor... NoIntel Atom thermal sensor... Success! (driver `coretemp')Intel AMB FB-DIMM thermal sensor... NoVIA C7 thermal sensor... NoVIA Nano thermal sensor... NoSome Super I/O chips contain embedded sensors. We have to write tostandard I/O ports to probe them. This is usually safe.Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2fTrying family `National Semiconductor'... NoTrying family `SMSC'... NoTrying family `VIA/Winbond/Nuvoton/Fintek'... YesFound `Fintek F71858DG Super IO Sensors' Success! (address 0xa00, driver `f71882fg')Probing for Super-I/O at 0x4e/0x4fTrying family `National Semiconductor'... NoTrying family `SMSC'... NoTrying family `VIA/Winbond/Nuvoton/Fintek'... NoTrying family `ITE'... NoSome systems (mainly servers) implement IPMI, a set of common interfacesthrough which system health data may be retrieved, amongst other things.We first try to get the information from SMBIOS. If we don't find itthere, we have to read from arbitrary I/O ports to probe for suchinterfaces. This is normally safe. Do you want to scan for IPMIinterfaces? (YES/no): Probing for `IPMI BMC KCS' at 0xca0... NoProbing for `IPMI BMC SMIC' at 0xca8... NoSome hardware monitoring chips are accessible through the ISA I/O ports.We have to write to arbitrary I/O ports to probe them. This is usuallysafe though. Yes, you do have ISA I/O ports even if you do not have anyISA slots! Do you want to scan the ISA I/O ports? (yes/NO): Probing for `National Semiconductor LM78' at 0x290... NoProbing for `National Semiconductor LM79' at 0x290... NoProbing for `Winbond W83781D' at 0x290... NoProbing for `Winbond W83782D' at 0x290... NoLastly, we can probe the I2C/SMBus adapters for connected hardwaremonitoring devices. This is the most risky part, and while it worksreasonably well on most systems, it has been reported to cause troubleon some systems.Do you want to probe the I2C/SMBus adapters now? (YES/no): Using driver `i2c-nforce2' for device 0000:00:03.2: nVidia Corporation nForce SMBus (MCP79)Module i2c-dev loaded successfully.Next adapter: SMBus nForce2 adapter at 4d00 (i2c-0)Do you want to scan it? (yes/NO/selectively): Client found at address 0x50Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoProbing for `EDID EEPROM'... NoClient found at address 0x51Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoClient found at address 0x52Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoClient found at address 0x53Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoNext adapter: NVIDIA i2c adapter (i2c-1)Do you want to scan it? (YES/no/selectively): Next adapter: NVIDIA i2c adapter (i2c-2)Do you want to scan it? (YES/no/selectively): Next adapter: NVIDIA i2c adapter (i2c-3)Do you want to scan it? (YES/no/selectively): Client found at address 0x50Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoProbing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip)Now follows a summary of the probes I have just done.Just press ENTER to continue: Driver `coretemp': * Chip `Intel Atom thermal sensor' (confidence: 9)Driver `f71882fg': * ISA bus, address 0xa00 Chip `Fintek F71858DG Super IO Sensors' (confidence: 9)Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensorsfor initialization at boot time.You should now start the lm_sensors service to load the requiredkernel modules.Unloading i2c-dev... OK * Setting sensors limits ...done.Reading package lists...Building dependency tree...Reading state information...Reading extended state information...Initializing package states...The following NEW packages will be installed: autoconf{a} automake autotools-dev{a} m4{a} 0 packages upgraded, 4 newly installed, 0 to remove and 0 not upgraded.Need to get 1,685kB of archives. After unpacking 4,915kB will be used.Writing extended state information...Get:1 http://free.nchc.org.tw/ubuntu/ lucid/main m4 1.4.13-3 [241kB]Get:2 http://free.nchc.org.tw/ubuntu/ lucid/main autoconf 2.65-3ubuntu1 [772kB]Get:3 http://free.nchc.org.tw/ubuntu/ lucid/main autotools-dev 20090611.1 [64.1kB]Get:4 http://free.nchc.org.tw/ubuntu/ lucid/main automake 1:1.11.1-1 [608kB]Fetched 1,685kB in 2min 15s (12.4kB/s)Selecting previously deselected package m4.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 112625 files and directories currently installed.)
Unpacking m4 (from .../archives/m4_1.4.13-3_i386.deb) ...
Selecting previously deselected package autoconf.
Unpacking autoconf (from .../autoconf_2.65-3ubuntu1_all.deb) ...
Selecting previously deselected package autotools-dev.
Unpacking autotools-dev (from .../autotools-dev_20090611.1_all.deb) ...
Selecting previously deselected package automake.
Unpacking automake (from .../automake_1%3a1.11.1-1_all.deb) ...
Processing triggers for install-info ...
install-info: warning: no info dir entry in `/usr/share/info/sbm-cz.info.gz'
install-info: warning: no info dir entry in `/usr/share/info/sbm-zh.info.gz'
install-info: warning: no info dir entry in `/usr/share/info/sbm.info.gz'
Processing triggers for man-db ...
Setting up m4 (1.4.13-3) ...
Setting up autoconf (2.65-3ubuntu1) ...
Setting up autotools-dev (20090611.1) ...
Setting up automake (1:1.11.1-1) ...
update-alternatives: using /usr/bin/automake-1.11 to provide /usr/bin/automake (automake) in auto mode.
Reading package lists...Building dependency tree...Reading state information...Reading extended state information...Initializing package states...Writing extended state information...U nvclock/.cvsignoreU nvclock/ABOUTU nvclock/AUTHORSU nvclock/COPYINGU nvclock/ChangeLogU nvclock/FAQU nvclock/INSTALLU nvclock/Makefile.inU nvclock/NEWSU nvclock/READMEU nvclock/acinclude.m4U nvclock/autogen.shU nvclock/config.h.inU nvclock/configureU nvclock/configure.inU nvclock/install-shU nvclock/nvclock.1U nvclock/nvclock.desktopU nvclock/nvclock.pngU nvclock/src/.cvsignoreU nvclock/src/Makefile.inU nvclock/src/nvclock.cU nvclock/src/smartdimmer.cU nvclock/src/backend/MakefileU nvclock/src/backend/Makefile.inU nvclock/src/backend/adt7473.cU nvclock/src/backend/back_bsd.cU nvclock/src/backend/back_linux.cU nvclock/src/backend/back_solaris.cU nvclock/src/backend/back_win32.cU nvclock/src/backend/backend.cU nvclock/src/backend/backend.hU nvclock/src/backend/bios.cU nvclock/src/backend/config.cU nvclock/src/backend/error.cU nvclock/src/backend/f75375.cU nvclock/src/backend/f75375.hU nvclock/src/backend/i2c.cU nvclock/src/backend/i2c.hU nvclock/src/backend/info.cU nvclock/src/backend/libc_wrapper.cU nvclock/src/backend/lm99.cU nvclock/src/backend/nv30.cU nvclock/src/backend/nv40.cU nvclock/src/backend/nv50.cU nvclock/src/backend/nvclock.hU nvclock/src/backend/nvcontrol.cU nvclock/src/backend/nvreg.hU nvclock/src/backend/overclock.cU nvclock/src/backend/utils.cU nvclock/src/backend/w83781d.cU nvclock/src/backend/w83l785r.cU nvclock/src/backend/xf86i2c.cU nvclock/src/backend/xf86i2c.hU nvclock/src/backend/xfree.hU nvclock/src/gtk/.cvsignoreU nvclock/src/gtk/Makefile.inU nvclock/src/gtk/banner.cU nvclock/src/gtk/banner.hU nvclock/src/gtk/banner_gl.hU nvclock/src/gtk/banner_hw.hU nvclock/src/gtk/gl.cU nvclock/src/gtk/gl.hU nvclock/src/gtk/hw.cU nvclock/src/gtk/hw.hU nvclock/src/gtk/interface.hU nvclock/src/gtk/main.cU nvclock/src/gtk/settings.cU nvclock/src/gtk/settings.hU nvclock/src/nvcontrol/Makefile.inU nvclock/src/nvcontrol/libnvcontrol.cU nvclock/src/nvcontrol/libnvcontrol.hU nvclock/src/nvcontrol/nvcontrol.cU nvclock/src/nvcontrol/nvcontrol.hU nvclock/src/qt/.cvsignoreU nvclock/src/qt/Makefile.inU nvclock/src/qt/links.xpmU nvclock/src/qt/main.cppU nvclock/src/qt/nv.xpmU nvclock/src/qt/people.xpmU nvclock/src/qt/qt_nvclock.cppU nvclock/src/qt/qt_nvclock.hU nvclock/src/qt/qt_nvclock.proU nvclock/src/qt/qt_xfree.cppU nvclock/src/qt/qt_xfree.hU nvclock/src/qt/x.xpmchecking for gcc... gccchecking whether the C compiler works... yeschecking for C compiler default output file name... a.outchecking for suffix of executables... checking whether we are cross compiling... nochecking for suffix of object files... ochecking whether we are using the GNU C compiler... yeschecking whether gcc accepts -g... yeschecking for gcc option to accept ISO C89... none neededchecking for g++... g++checking whether we are using the GNU C++ compiler... yeschecking whether g++ accepts -g... yeschecking for a BSD-compatible install... /usr/bin/install -cchecking whether make sets $(MAKE)... yeschecking how to run the C preprocessor... gcc -Echecking for grep that handles long lines and -e... /bin/grepchecking for egrep... /bin/grep -Echecking for ANSI C header files... yeschecking for library containing getopt_long... none requiredchecking for sys/types.h... yeschecking for sys/stat.h... yeschecking for stdlib.h... yeschecking for string.h... yeschecking for memory.h... yeschecking for strings.h... yeschecking for inttypes.h... yeschecking for stdint.h... yeschecking for unistd.h... yeschecking getopt.h usability... yeschecking getopt.h presence... yeschecking for getopt.h... yeschecking for pkg-config... /usr/bin/pkg-configchecking for gtk+-2.0 >= 2.4.0... configure: creating ./config.statusconfig.status: creating src/Makefileconfig.status: creating src/backend/Makefileconfig.status: creating src/nvcontrol/Makefileconfig.status: creating src/qt/Makefileconfig.status: creating src/gtk/Makefileconfig.status: creating Makefileconfig.status: creating config.hconfig.status: executing default-1 commandsNVClock build summary:----------------------- Commandline version enabled- NV-CONROL support disabled- GTK2 GUI disabled- QT GUI disabledmake -C src allmake[1]: Entering directory `/usr/local/src/nvclock/src'make[2]: Entering directory `/usr/local/src/nvclock/src/backend'gcc -O0 -I../.. -I../nvcontrol -c -o backend.o backend.cgcc -O0 -I../.. -I../nvcontrol -c -o bios.o bios.cgcc -O0 -I../.. -I../nvcontrol -c -o config.o config.cgcc -O0 -I../.. -I../nvcontrol -c -o error.o error.cgcc -O0 -I../.. -I../nvcontrol -c -o nv30.o nv30.cgcc -O0 -I../.. -I../nvcontrol -c -o nv40.o nv40.cgcc -O0 -I../.. -I../nvcontrol -c -o nv50.o nv50.cgcc -O0 -I../.. -I../nvcontrol -c -o info.o info.cgcc -O0 -I../.. -I../nvcontrol -c -o overclock.o overclock.cgcc -O0 -I../.. -I../nvcontrol -c -o utils.o utils.cgcc -O0 -I../.. -I../nvcontrol -c -o i2c.o i2c.cgcc -O0 -I../.. -I../nvcontrol -c -o xf86i2c.o xf86i2c.cgcc -O0 -I../.. -I../nvcontrol -c -o adt7473.o adt7473.cgcc -O0 -I../.. -I../nvcontrol -c -o f75375.o f75375.cgcc -O0 -I../.. -I../nvcontrol -c -o lm99.o lm99.cgcc -O0 -I../.. -I../nvcontrol -c -o w83781d.o w83781d.cgcc -O0 -I../.. -I../nvcontrol -c -o w83l785r.o w83l785r.cgcc -O0 -I../.. -I../nvcontrol -c -o libc_wrapper.o libc_wrapper.cgcc -O0 -I../.. -I../nvcontrol -c -o back_linux.o back_linux.car cru libbackend.a backend.o bios.o config.o error.o nv30.o nv40.o nv50.o info.o overclock.o utils.o i2c.o xf86i2c.o adt7473.o f75375.o lm99.o w83781d.o w83l785r.o libc_wrapper.o back_linux.oranlib libbackend.amake[2]: Leaving directory `/usr/local/src/nvclock/src/backend'make[2]: Entering directory `/usr/local/src/nvclock/src/nvcontrol'make[2]: Nothing to be done for `all'.make[2]: Leaving directory `/usr/local/src/nvclock/src/nvcontrol'make[2]: Entering directory `/usr/local/src/nvclock/src/gtk'make[2]: Nothing to be done for `all'.make[2]: Leaving directory `/usr/local/src/nvclock/src/gtk'make[2]: Entering directory `/usr/local/src/nvclock/src/qt'make[2]: Nothing to be done for `all'.make[2]: Leaving directory `/usr/local/src/nvclock/src/qt'gcc -g -O2 -o nvclock nvclock.c -I./backend -I./nvcontrol -I.. -L./backend -lbackendgcc -g -O2 -o smartdimmer smartdimmer.c -I./backend -I./nvcontrol -I.. -L./backend -lbackendmake[1]: Leaving directory `/usr/local/src/nvclock/src'installing ABOUT as /usr/local/share/doc//ABOUTinstalling AUTHORS as /usr/local/share/doc//AUTHORSinstalling ChangeLog as /usr/local/share/doc//ChangeLoginstalling FAQ as /usr/local/share/doc//FAQinstalling README as /usr/local/share/doc//READMEmkdir -p /usr/local/share/man/man1cp nvclock.1 /usr/local/share/man/man1mkdir -p /usr/local/share/applicationsmkdir -p /usr/local/share/icons/hicolor/48x48/appscp nvclock.desktop /usr/local/share/applicationscp nvclock.png /usr/local/share/icons/hicolor/48x48/appsmake -C src installmake[1]: Entering directory `/usr/local/src/nvclock/src'make[2]: Entering directory `/usr/local/src/nvclock/src/backend'make[2]: Nothing to be done for `install'.make[2]: Leaving directory `/usr/local/src/nvclock/src/backend'make[2]: Entering directory `/usr/local/src/nvclock/src/nvcontrol'make[2]: Nothing to be done for `install'.make[2]: Leaving directory `/usr/local/src/nvclock/src/nvcontrol'make[2]: Entering directory `/usr/local/src/nvclock/src/gtk'make[2]: Nothing to be done for `install'.make[2]: Leaving directory `/usr/local/src/nvclock/src/gtk'make[2]: Entering directory `/usr/local/src/nvclock/src/qt'make[2]: Nothing to be done for `install'.make[2]: Leaving directory `/usr/local/src/nvclock/src/qt'mkdir -p /usr/local/bin/usr/bin/install -c -c nvclock /usr/local/bin/nvclock/usr/bin/install -c -c smartdimmer /usr/local/bin/smartdimmermake[1]: Leaving directory `/usr/local/src/nvclock/src'