rendered paste bodyInitializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.35-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Sep 29 08:45:18 CEST 2010
Command line: root=/dev/disk/by-uuid/b7349eda-f8ca-446e-addd-22517511ea54 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
NX (Execute Disable) protection: active
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e6000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000cfe90000 (usable)
modified: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
modified: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
modified: 00000000cfed0000 - 00000000cff00000 (reserved)
modified: 00000000fff00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000130000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cfe90000
0000000000 - 00c0000000 page 1G
00c0000000 - 00cfe00000 page 2M
00cfe00000 - 00cfe90000 page 4k
kernel direct mapping tables up to cfe90000 @ 16000-19000
init_memory_mapping: 0000000100000000-0000000130000000
0100000000 - 0130000000 page 2M
kernel direct mapping tables up to 130000000 @ 18000-1a000
RAMDISK: 37e4a000 - 37ff0000
ACPI: RSDP 00000000000fb860 00024 (v02 ACPIAM)
ACPI: XSDT 00000000cfe90100 0005C (v01 060710 XSDT1948 20100607 MSFT 00000097)
ACPI: FACP 00000000cfe90290 000F4 (v03 060710 FACP1948 20100607 MSFT 00000097)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20100428/tbfadt-557)
ACPI: DSDT 00000000cfe90450 0E856 (v01 A1160 A1160000 00000000 INTL 20060113)
ACPI: FACS 00000000cfea8000 00040
ACPI: APIC 00000000cfe90390 0007C (v01 060710 APIC1948 20100607 MSFT 00000097)
ACPI: MCFG 00000000cfe90410 0003C (v01 060710 OEMMCFG 20100607 MSFT 00000097)
ACPI: OEMB 00000000cfea8040 00072 (v01 060710 OEMB1948 20100607 MSFT 00000097)
ACPI: SRAT 00000000cfe9f450 00108 (v03 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 00000000cfe9f560 00038 (v01 060710 OEMHPET 20100607 MSFT 00000097)
ACPI: SSDT 00000000cfe9f5a0 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00043fffff] PMD -> [ffff880002000000-ffff8800059fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000cfe90
0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1048095
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3927 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833224 pages, LIFO batch:31
Normal zone: 2688 pages used for memmap
Normal zone: 193920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 6 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [19200 - 199ff]
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
PM: Registered nosave memory: 00000000cfe90000 - 00000000cfea8000
PM: Registered nosave memory: 00000000cfea8000 - 00000000cfed0000
PM: Registered nosave memory: 00000000cfed0000 - 00000000cff00000
PM: Registered nosave memory: 00000000cff00000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Allocating PCI resources starting at cff00000 (gap: cff00000:30000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88832 r8192 d21760 u262144
pcpu-alloc: s88832 r8192 d21760 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031071
Kernel command line: root=/dev/disk/by-uuid/b7349eda-f8ca-446e-addd-22517511ea54 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 366000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
early_res array is doubled to 128 at [19a00 - 1a9ff]
Subtract (60 early reservations)
#1 [0001000000 - 00016f9598] TEXT DATA BSS
#2 [0037e4a000 - 0037ff0000] RAMDISK
#3 [00016fa000 - 00016fa29c] BRK
#4 [00000ff790 - 0000100000] BIOS reserved
#5 [00000ff780 - 00000ff790] MP-table mpf
#6 [000009fc00 - 00000f1160] BIOS reserved
#7 [00000f1324 - 00000ff780] BIOS reserved
#8 [00000f1160 - 00000f1324] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000016000] ACPI WAKEUP
#11 [0000016000 - 0000018000] PGTABLE
#12 [0000018000 - 0000019000] PGTABLE
#13 [00016fa2c0 - 00016fb2c0] BOOTMEM
#14 [0000019000 - 0000019200] BOOTMEM
#15 [0001efc000 - 0001efd000] BOOTMEM
#16 [0001efd000 - 0001efe000] BOOTMEM
#17 [0002000000 - 0005a00000] MEMMAP 0
#18 [00016fb2c0 - 00017132c0] BOOTMEM
#19 [00017132c0 - 000172b2c0] BOOTMEM
#20 [000172b2c0 - 00017432c0] BOOTMEM
#21 [0001744000 - 0001745000] BOOTMEM
#22 [00016f95c0 - 00016f9601] BOOTMEM
#23 [00016f9640 - 00016f9683] BOOTMEM
#24 [00016f96c0 - 00016f98f0] BOOTMEM
#25 [00016f9900 - 00016f9968] BOOTMEM
#26 [00016f9980 - 00016f99e8] BOOTMEM
#27 [00016f9a00 - 00016f9a68] BOOTMEM
#28 [00016f9a80 - 00016f9ae8] BOOTMEM
#29 [00016f9b00 - 00016f9b68] BOOTMEM
#30 [00016f9b80 - 00016f9be8] BOOTMEM
#31 [00016f9c00 - 00016f9c68] BOOTMEM
#32 [00016f9c80 - 00016f9ce8] BOOTMEM
#33 [00016f9d00 - 00016f9d68] BOOTMEM
#34 [00016f9d80 - 00016f9da0] BOOTMEM
#35 [00016f9dc0 - 00016f9de0] BOOTMEM
#36 [00016f9e00 - 00016f9e3f] BOOTMEM
#37 [00016f9e40 - 00016f9e7f] BOOTMEM
#38 [0001800000 - 000181d000] BOOTMEM
#39 [0001840000 - 000185d000] BOOTMEM
#40 [0001880000 - 000189d000] BOOTMEM
#41 [00018c0000 - 00018dd000] BOOTMEM
#42 [0001900000 - 000191d000] BOOTMEM
#43 [0001940000 - 000195d000] BOOTMEM
#44 [00016f9e80 - 00016f9e88] BOOTMEM
#45 [00016f9ec0 - 00016f9ec8] BOOTMEM
#46 [00016f9f00 - 00016f9f18] BOOTMEM
#47 [00016f9f40 - 00016f9f70] BOOTMEM
#48 [00017432c0 - 00017433e0] BOOTMEM
#49 [00016f9f80 - 00016f9fc8] BOOTMEM
#50 [0001743400 - 0001743448] BOOTMEM
#51 [0001745000 - 000174d000] BOOTMEM
#52 [000195d000 - 0001d5d000] BOOTMEM
#53 [0005a00000 - 0005c00000] BOOTMEM
#54 [0020000000 - 0024000000] BOOTMEM
#55 [0001743480 - 00017434a0] BOOTMEM
#56 [0005c00000 - 0009c00000] BOOTMEM
#57 [000174d000 - 000176d000] BOOTMEM
#58 [000176d000 - 00017ad000] BOOTMEM
#59 [000001aa00 - 0000022a00] BOOTMEM
Memory: 3985444k/4980736k available (3544k kernel code, 788356k absent, 206936k reserved, 1832k data, 488k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:768
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3311.423 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5621.51 BogoMIPS (lpj=9365630)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
ACPI: Core revision 20100428
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X6 1055T Processor stepping 00
System has AMD C1E enabled
Switch to broadcast mode on CPU0
Booting Node 0, Processors #1
Switch to broadcast mode on CPU1
#2
Switch to broadcast mode on CPU2
#3
Switch to broadcast mode on CPU3
#4
Switch to broadcast mode on CPU4
#5 Ok.
Brought up 6 CPUs
Switch to broadcast mode on CPU5
Total of 6 processors activated (33728.88 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [e0000000, efffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
TOM2: 0000000130000000 aka 4864M
bus: [00, 07] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0xf0000000-0xffffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
bus: 00 index 3 [mem 0xd0000000-0xdfffffff]
bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI Warning: Incorrect checksum in table [OEMB] - 0x94, should be 0x8B (20100428/tbutils-314)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
pci 0000:00:11.0: reg 24: [mem 0xfbcfe400-0xfbcfe7ff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: reg 10: [mem 0xfbcf6000-0xfbcf6fff]
pci 0000:00:12.1: reg 10: [mem 0xfbcf7000-0xfbcf7fff]
pci 0000:00:12.2: reg 10: [mem 0xfbcfe800-0xfbcfe8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0xfbcfc000-0xfbcfcfff]
pci 0000:00:13.1: reg 10: [mem 0xfbcfd000-0xfbcfdfff]
pci 0000:00:13.2: reg 10: [mem 0xfbcfec00-0xfbcfecff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
pci 0000:00:14.2: reg 10: [mem 0xfbcf8000-0xfbcfbfff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.5: reg 10: [mem 0xfbcff000-0xfbcfffff]
pci 0000:04:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: reg 18: [mem 0xfbfc0000-0xfbfdffff 64bit]
pci 0000:04:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:04:00.0: reg 30: [mem 0xfbfa0000-0xfbfbffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.1: reg 10: [mem 0xfbffc000-0xfbffffff 64bit]
pci 0000:04:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 04-04]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 10: [io 0xd800-0xd8ff]
pci 0000:03:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit]
pci 0000:03:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:06.0: PCI bridge to [bus 03-03]
pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xfbdff800-0xfbdfffff 64bit]
pci 0000:02:00.0: reg 18: [io 0xc800-0xc8ff]
pci 0000:02:00.0: supports D2
pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:07.0: PCI bridge to [bus 02-02]
pci 0000:00:07.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
HEST: Table is not found!
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x00100000-0xcfefffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x040b] has been reserved
system 00:07: [io 0x04d6] has been reserved
system 00:07: [io 0x0c00-0x0c01] has been reserved
system 00:07: [io 0x0c14] has been reserved
system 00:07: [io 0x0c50-0x0c51] has been reserved
system 00:07: [io 0x0c52] has been reserved
system 00:07: [io 0x0c6c] has been reserved
system 00:07: [io 0x0c6f] has been reserved
system 00:07: [io 0x0cd0-0x0cd1] has been reserved
system 00:07: [io 0x0cd2-0x0cd3] has been reserved
system 00:07: [io 0x0cd4-0x0cd5] has been reserved
system 00:07: [io 0x0cd6-0x0cd7] has been reserved
system 00:07: [io 0x0cd8-0x0cdf] has been reserved
system 00:07: [io 0x0b00-0x0b3f] has been reserved
system 00:07: [io 0x0800-0x089f] has been reserved
system 00:07: [io 0x0b00-0x0b0f] has been reserved
system 00:07: [io 0x0b20-0x0b3f] has been reserved
system 00:07: [io 0x0900-0x090f] has been reserved
system 00:07: [io 0x0910-0x091f] has been reserved
system 00:07: [io 0xfe00-0xfefe] has been reserved
system 00:07: [mem 0xcff00000-0xcfffffff] has been reserved
system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:0a: [io 0x0230-0x023f] has been reserved
system 00:0a: [io 0x0290-0x029f] has been reserved
system 00:0a: [io 0x0f40-0x0f4f] has been reserved
system 00:0a: [io 0x0a30-0x0a3f] has been reserved
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
pci 0000:00:02.0: PCI bridge to [bus 04-04]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 03-03]
pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:06.0: bridge window [mem pref disabled]
pci 0000:00:07.0: PCI bridge to [bus 02-02]
pci 0000:00:07.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:00:14.4: PCI bridge to [bus 01-01]
pci 0000:00:14.4: bridge window [io disabled]
pci 0000:00:14.4: bridge window [mem disabled]
pci 0000:00:14.4: bridge window [mem pref disabled]
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:07.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xcff00000-0xdfffffff]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:04:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1688k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1285842406.866:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7916
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:06.0: setting latency timer to 64
pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 488k freed
udev[66]: starting version 162
SCSI subsystem initialized
Floppy drive(s): fd0 is 1.44M
libata version 3.00 loaded.
pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:00:14.1: setting latency timer to 64
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: irq 43 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe500 irq 43
ata2: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe580 irq 43
ata3: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe600 irq 43
ata4: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe680 irq 43
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
FDC 0 is a post-1991 82077
ata5.01: ATA-7: ST3500630A, 3.AAF, max UDMA/100
ata5.01: 976773168 sectors, multi 16: LBA48
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata5.01: configured for UDMA/100
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
scsi 4:0:1:0: Direct-Access ATA ST3500630A 3.AA PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 4:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:1:0: [sdb] Write Protect is off
sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb:
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 3:0:0:0: [sda] Attached SCSI disk
ata5: lost interrupt (Status 0x58)
ata5: drained 65536 bytes to clear DRQ.
ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.01: failed command: READ DMA
ata5.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.01: status: { DRDY }
ata5: soft resetting link
ata5.01: configured for UDMA/100
ata5.01: device reported invalid CHS sector 0
ata5: EH complete
ata5: lost interrupt (Status 0x58)
ata5: drained 65536 bytes to clear DRQ.
ata5.01: limiting speed to UDMA/66:PIO4
ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.01: failed command: READ DMA
ata5.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.01: status: { DRDY }
ata5: soft resetting link
ata5.01: configured for UDMA/66
ata5.01: device reported invalid CHS sector 0
ata5: EH complete
ata5: lost interrupt (Status 0x58)
ata5: drained 65536 bytes to clear DRQ.
ata5.01: limiting speed to UDMA/33:PIO4
ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.01: failed command: READ DMA
ata5.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.01: status: { DRDY }
ata5: soft resetting link
ata5.01: configured for UDMA/33
ata5.01: device reported invalid CHS sector 0
ata5: EH complete
ata5: lost interrupt (Status 0x58)
ata5: drained 65536 bytes to clear DRQ.
ata5.01: limiting speed to PIO4
ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.01: failed command: READ DMA
ata5.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.01: status: { DRDY }
ata5: soft resetting link
ata5.01: configured for PIO4
ata5.01: device reported invalid CHS sector 0
ata5: EH complete
sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
sdb: detected capacity change from 0 to 500107862016
sd 4:0:1:0: [sdb] Attached SCSI disk
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda3): mounted filesystem with writeback data mode
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
udev[753]: starting version 162
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: WMI: Mapper loaded
input: PC Speaker as /devices/platform/pcspkr/input/input2
ACPI: acpi_idle registered with cpuidle
EDAC MC: Ver: 2.1.0 Sep 29 2010
EDAC amd64_edac: Ver: 3.3.0 Sep 29 2010
EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
amd64_edac: probe of 0000:00:18.2 failed with error -22
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:1:0: Attached scsi generic sg1 type 0
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:03:00.0: setting latency timer to 64
r8169 0000:03:00.0: irq 44 for MSI/MSI-X
r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xffffc90010402000, e0:cb:4e:54:a8:28, XID 18000000 IRQ 44
[drm] Initialized drm 1.1.0 20060810
ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0x0b00-0x0b0f 64bit]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
powernow-k8: Found 1 AMD Phenom(tm) II X6 1055T Processor (6 cpu cores) (version 2.20.00)
powernow-k8: Core Performance Boosting: on.
powernow-k8: 0 : pstate 0 (2800 MHz)
powernow-k8: 1 : pstate 1 (2200 MHz)
powernow-k8: 2 : pstate 2 (1500 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbcfe800
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbcfec00
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
firewire_ohci 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
firewire_ohci 0000:02:00.0: setting latency timer to 64
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
radeon 0000:04:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (CYPRESS 0x1002:0x6899).
[drm] register mmio base: 0xFBFC0000
[drm] register mmio size: 131072
ATOM BIOS: CYPRESS
[drm] Clocks initialized !
radeon 0000:04:00.0: VRAM: 1024M 0x00000000 - 0x3FFFFFFF (1024M used)
radeon 0000:04:00.0: GTT: 512M 0x40000000 - 0x5FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 2026784 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
radeon 0000:04:00.0: irq 45 for MSI/MSI-X
radeon 0000:04:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading CYPRESS Microcode
firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbcf6000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbcf7000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbcfc000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbcfd000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbcff000
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DisplayPort
[drm] HPD4
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A
[drm] HPD5
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 3:
[drm] DVI-I
[drm] HPD6
[drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
hda_codec: ALC1200: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input3
firewire_core: created device fw0: GUID 001e8c0000c5c38e, S400
usb 4-2: new low speed USB device using ohci_hcd and address 2
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0140000
[drm] vram apper at 0xD0000000
[drm] size 7258112
[drm] fb depth is 24
[drm] pitch is 6912
usb 4-3: new low speed USB device using ohci_hcd and address 3
Console: switching to colour frame buffer device 210x65
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized radeon 2.5.0 20080528 for 0000:04:00.0 on minor 0
HDA Intel 0000:04:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
HDA Intel 0000:04:00.1: irq 46 for MSI/MSI-X
HDA Intel 0000:04:00.1: setting latency timer to 64
usbcore: registered new interface driver hiddev
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input4
generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:12.1-2/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input5
generic-usb 0003:1241:1503.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:12.1-3/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.1/input/input6
generic-usb 0003:1241:1503.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:12.1-3/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
EXT3-fs (sda3): using internal journal
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): mounted filesystem with writeback data mode
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda6): using internal journal
EXT3-fs (sda6): mounted filesystem with writeback data mode
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb1): using internal journal
EXT3-fs (sdb1): mounted filesystem with writeback data mode
Adding 995992k swap on /dev/sda5. Priority:-1 extents:1 across:995992k
r8169 0000:03:00.0: eth0: link up
r8169 0000:03:00.0: eth0: link up
it87: Found IT8720F chip at 0x290, revision 2
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region SIOE [mem 0x00000290-0x000002af]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
fuse init (API version 7.14)