Pakketlijsten worden ingelezen...Boom van vereisten wordt opgebouwd...De status informatie wordt gelezen...Uitgebreide statusinformatie aan het lezen...Initialiseren van pakketstatussen...# sensors-detect revision 5842 (2010-06-19 21:47:45 +0200)# System: To Be Filled By O.E.M. To Be Filled By O.E.M.# Board: ASRock AMCP7AION-HTThis program will help you determine which kernel modules you needto load to use lm_sensors most effectively. It is generally safeand recommended to accept the default answers to all questions,unless you know what you're doing.Some south bridges, CPUs or memory controllers contain embedded sensors.Do you want to scan for them? This is totally safe. (YES/no): Silicon Integrated Systems SIS5595... NoVIA VT82C686 Integrated Sensors... NoVIA VT8231 Integrated Sensors... NoAMD K8 thermal sensors... NoAMD Family 10h thermal sensors... NoAMD Family 11h thermal sensors... NoIntel Core family thermal sensor... NoIntel Atom thermal sensor... Success! (driver `coretemp')Intel AMB FB-DIMM thermal sensor... NoVIA C7 thermal sensor... NoVIA Nano thermal sensor... NoSome Super I/O chips contain embedded sensors. We have to write tostandard I/O ports to probe them. This is usually safe.Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2fTrying family `National Semiconductor'... NoTrying family `SMSC'... NoTrying family `VIA/Winbond/Nuvoton/Fintek'... YesFound `Nuvoton W83677HG-I Super IO Sensors' Success! (address 0x290, driver `to-be-written')Probing for Super-I/O at 0x4e/0x4fTrying family `National Semiconductor'... NoTrying family `SMSC'... NoTrying family `VIA/Winbond/Nuvoton/Fintek'... NoTrying family `ITE'... NoSome systems (mainly servers) implement IPMI, a set of common interfacesthrough which system health data may be retrieved, amongst other things.We first try to get the information from SMBIOS. If we don't find itthere, we have to read from arbitrary I/O ports to probe for suchinterfaces. This is normally safe. Do you want to scan for IPMIinterfaces? (YES/no): Probing for `IPMI BMC KCS' at 0xca0... NoProbing for `IPMI BMC SMIC' at 0xca8... NoSome hardware monitoring chips are accessible through the ISA I/O ports.We have to write to arbitrary I/O ports to probe them. This is usuallysafe though. Yes, you do have ISA I/O ports even if you do not have anyISA slots! Do you want to scan the ISA I/O ports? (yes/NO): Probing for `National Semiconductor LM78' at 0x290... NoProbing for `National Semiconductor LM79' at 0x290... NoProbing for `Winbond W83781D' at 0x290... NoProbing for `Winbond W83782D' at 0x290... NoLastly, we can probe the I2C/SMBus adapters for connected hardwaremonitoring devices. This is the most risky part, and while it worksreasonably well on most systems, it has been reported to cause troubleon some systems.Do you want to probe the I2C/SMBus adapters now? (YES/no): Using driver `i2c-nforce2' for device 0000:00:03.2: nVidia Corporation nForce SMBus (MCP79)Module i2c-dev loaded successfully.Next adapter: SMBus nForce2 adapter at 4d00 (i2c-0)Do you want to scan it? (yes/NO/selectively): Client found at address 0x50Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoProbing for `EDID EEPROM'... NoClient found at address 0x51Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoClient found at address 0x52Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoClient found at address 0x53Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoNext adapter: NVIDIA i2c adapter (i2c-1)Do you want to scan it? (YES/no/selectively): Next adapter: NVIDIA i2c adapter (i2c-2)Do you want to scan it? (YES/no/selectively): Next adapter: NVIDIA i2c adapter (i2c-3)Do you want to scan it? (YES/no/selectively): Client found at address 0x50Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoProbing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip)Now follows a summary of the probes I have just done.Just press ENTER to continue: Driver `to-be-written': * ISA bus, address 0x290 Chip `Nuvoton W83677HG-I Super IO Sensors' (confidence: 9)Driver `coretemp': * Chip `Intel Atom thermal sensor' (confidence: 9)Note: there is no driver for Nuvoton W83677HG-I Super IO Sensors yet.Check http://www.lm-sensors.org/wiki/Devices for updates.Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensorsfor initialization at boot time.You should now start the lm_sensors service to load the requiredkernel modules.Unloading i2c-dev... OKPakketlijsten worden ingelezen...Boom van vereisten wordt opgebouwd...De status informatie wordt gelezen...Uitgebreide statusinformatie aan het lezen...Initialiseren van pakketstatussen...xbmc-live stop/waitingxbmc-live start/running, process 2609