rendered paste bodyLinux version 2.6.33.7-desktop-1mnb (qateam@titan.mandriva.com) (gcc version 4.4.3 (GCC) ) #1 SMP Fri Aug 27 21:07:14 UTC 2010BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000006ffa8000 (usable) BIOS-e820: 000000006ffa8000 - 000000006ffb0000 (ACPI NVS) BIOS-e820: 000000006ffb0000 - 000000006ffbe000 (ACPI data) BIOS-e820: 000000006ffbe000 - 000000006fff0000 (ACPI NVS) BIOS-e820: 000000006fff0000 - 0000000070000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!DMI 2.4 present.AMI BIOS detected: BIOS may corrupt low RAM, working around it.e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)last_pfn = 0x6ffa8 max_arch_pfn = 0x100000MTRR default type: uncachableMTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-EFFFF write-through F0000-FFFFF write-protectMTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FF0000000 write-back 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabledPAT not supported by CPU.initial memory mapped : 0 - 00c00000found SMP MP-table at [c00ff780] ff780init_memory_mapping: 0000000000000000-00000000373fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037000000 page 2M 0037000000 - 00373fe000 page 4kkernel direct mapping tables up to 373fe000 @ 15000-1b000RAMDISK: 37acd000 - 37fefcd4Allocated new RAMDISK: 0076e000 - 00c90cd4Move RAMDISK from 0000000037acd000 - 0000000037fefcd3 to 0076e000 - 00c90cd3ACPI: RSDP 000f7f40 00024 (v02 ACPIAM)ACPI: XSDT 6ffb0100 00054 (v01 PacBel PBDTNB00 10000702 MSFT 00000097)ACPI: FACP 6ffb0290 000F4 (v03 A.M.I OEMFACP 10000702 MSFT 00000097)ACPI: DSDT 6ffb0630 072AF (v01 T12R0 T12R0000 00000000 INTL 20051117)ACPI: FACS 6ffbe000 00040ACPI: APIC 6ffb0390 0005C (v01 A.M.I OEMAPIC 10000702 MSFT 00000097)ACPI: MCFG 6ffb03f0 0003C (v01 A.M.I OEMMCFG 10000702 MSFT 00000097)ACPI: SLIC 6ffb0430 00176 (v01 PacBel PBDTNB00 10000702 MSFT 00000097)ACPI: BOOT 6ffb0600 00028 (v01 A.M.I OEMBOOT 10000702 MSFT 00000097)ACPI: OEMB 6ffbe040 0005B (v01 A.M.I AMI_OEM 10000702 MSFT 00000097)ACPI: Local APIC address 0xfee00000907MB HIGHMEM available.883MB LOWMEM available. mapped low ram: 0 - 373fe000 low ram: 0 - 373fe000 node 0 low ram: 00000000 - 373fe000 node 0 bootmap 00017000 - 0001de80(14 early reservations) ==> bootmem [0000000000 - 00373fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000100000 - 0000769ce4] TEXT DATA BSS ==> [0000100000 - 0000769ce4] #3 [000076a000 - 000076d1ea] BRK ==> [000076a000 - 000076d1ea] #4 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000] #5 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790] #6 [000009fc00 - 00000fcb30] BIOS reserved ==> [000009fc00 - 00000fcb30] #7 [00000fcc84 - 00000ff780] BIOS reserved ==> [00000fcc84 - 00000ff780] #8 [00000fcb30 - 00000fcc84] MP-table mpc ==> [00000fcb30 - 00000fcc84] #9 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000] #10 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000] #11 [0000015000 - 0000017000] PGTABLE ==> [0000015000 - 0000017000] #12 [000076e000 - 0000c90cd4] NEW RAMDISK ==> [000076e000 - 0000c90cd4] #13 [0000017000 - 000001e000] BOOTMAP ==> [0000017000 - 000001e000]Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000373fe HighMem 0x000373fe -> 0x0006ffa8Movable zone start PFN for each nodeearly_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0006ffa8On node 0 totalpages: 458551free_area_init_node: node 0, pgdat c0612440, node_mem_map c1001200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1736 pages used for memmap Normal zone: 220470 pages, LIFO batch:31 HighMem zone: 1816 pages used for memmap HighMem zone: 230546 pages, LIFO batch:31Using APIC driver defaultACPI: PM-Timer IO Port: 0x808ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)ACPI: IRQ0 used by override.ACPI: IRQ2 used by override.ACPI: IRQ9 used by override.Using ACPI (MADT) for SMP configuration informationSMP: Allowing 2 CPUs, 0 hotplug CPUsnr_irqs_gsi: 24PM: Registered nosave memory: 000000000009f000 - 00000000000a0000PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000PM: Registered nosave memory: 00000000000e0000 - 0000000000100000Allocating PCI resources starting at 70000000 (gap: 70000000:8ee00000)Booting paravirtualized kernel on bare hardwaresetup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1PERCPU: Embedded 14 pages/cpu @c2000000 s35416 r0 d21928 u2097152pcpu-alloc: s35416 r0 d21928 u2097152 alloc=1*4194304pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454967Kernel command line: BOOT_IMAGE=linux root=LABEL=MDVRooT resume=LABEL=MDVSWaP splash=silent vga=788PID hash table entries: 4096 (order: 2, 16384 bytes)Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Enabling fast FPU save and restore... done.Enabling unmasked SIMD FPU exception support... done.Initializing CPU#0Initializing HighMem for node 0 (000373fe:0006ffa8)Memory: 1806036k/1834656k available (3268k kernel code, 27148k reserved, 2040k data, 520k init, 929448k highmem)virtual kernel memory layout: fixmap : 0xffd55000 - 0xfffff000 (2728 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) .init : 0xc0630000 - 0xc06b2000 ( 520 kB) .data : 0xc0431203 - 0xc062f388 (2040 kB) .text : 0xc0100000 - 0xc0431203 (3268 kB)Checking if this processor honours the WP bit even in supervisor mode...Ok.SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1Hierarchical RCU implementation.NR_IRQS:1280Extended CMOS year: 2000Console: colour dummy device 80x25console [tty0] enabledFast TSC calibration using PITDetected 1729.203 MHz processor.Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.40 BogoMIPS (lpj=1729203)Security Framework initializedTOMOYO Linux initializedMount-cache hash table entries: 512CPU: Physical Processor ID: 0CPU: Processor Core ID: 0mce: CPU supports 6 MCE banksCPU0: Thermal monitoring handled by SMIusing mwait in idle threads.Performance Events: no PMU driver, software events only.Checking 'hlt' instruction... OK.ACPI: Checking initramfs for custom DSDTACPI: Core revision 20091214ftrace: converting mcount calls to 0f 1f 44 00 00ftrace: allocating 15177 entries in 30 pagesEnabling APIC mode: Flat. Using 1 I/O APICs..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1CPU0: Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0cBooting Node 0, Processors #1 Ok.Initializing CPU#1CPU1: Thermal monitoring handled by SMIBrought up 2 CPUsTotal of 2 processors activated (6915.88 BogoMIPS).devtmpfs: initializedTime: 1:47:43 Date: 09/11/10NET: Registered protocol family 16ACPI FADT declares the system doesn't support PCIe ASPM, so disable itACPI: bus type pci registeredPCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)PCI: not using MMCONFIGPCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=8PCI: Using configuration type 1 for base accessbio: create slab <bio-0> at 0ACPI: EC: Look up EC in DSDTACPI: Executed 4 blocks of module-level executable AML codeACPI: Interpreter enabledACPI: (supports S0 S3 S4 S5)ACPI: Using IOAPIC for interrupt routingPCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resourcesPCI: Using MMCONFIG for extended config spaceACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62ACPI: No dock devices found.ACPI: PCI Root Bridge [PCI0] (0000:00)pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use thempci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)pci_root PNP0A03:00: host bridge window [mem 0x70000000-0xffffffff] (ignored)pci 0000:00:04.0: PME# supported from D0 D3hot D3coldpci 0000:00:04.0: PME# disabledpci 0000:00:05.0: PME# supported from D0 D3hot D3coldpci 0000:00:05.0: PME# disabledpci 0000:00:06.0: PME# supported from D0 D3hot D3coldpci 0000:00:06.0: PME# disabledpci 0000:00:07.0: PME# supported from D0 D3hot D3coldpci 0000:00:07.0: PME# disabledpci 0000:00:12.0: reg 10: [io 0xe800-0xe807]pci 0000:00:12.0: reg 14: [io 0xe400-0xe403]pci 0000:00:12.0: reg 18: [io 0xe000-0xe007]pci 0000:00:12.0: reg 1c: [io 0xdc00-0xdc03]pci 0000:00:12.0: reg 20: [io 0xd800-0xd80f]pci 0000:00:12.0: reg 24: [mem 0xfebffc00-0xfebfffff]pci 0000:00:12.0: set SATA to AHCI modepci 0000:00:13.0: reg 10: [mem 0xfebfe000-0xfebfefff]pci 0000:00:13.1: reg 10: [mem 0xfebfd000-0xfebfdfff]pci 0000:00:13.2: reg 10: [mem 0xfebfc000-0xfebfcfff]pci 0000:00:13.3: reg 10: [mem 0xfebfb000-0xfebfbfff]pci 0000:00:13.4: reg 10: [mem 0xfebfa000-0xfebfafff]pci 0000:00:13.5: reg 10: [mem 0xfebff800-0xfebff8ff]pci 0000:00:13.5: supports D1 D2pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hotpci 0000:00:13.5: PME# disabledpci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]pci 0000:00:14.2: reg 10: [mem 0xfebf4000-0xfebf7fff 64bit]pci 0000:00:14.2: PME# supported from D0 D3hot D3coldpci 0000:00:14.2: PME# disabledpci 0000:01:05.0: reg 10: [mem 0xb8000000-0xbbffffff pref]pci 0000:01:05.0: reg 14: [io 0x8800-0x88ff]pci 0000:01:05.0: reg 18: [mem 0xfa8f0000-0xfa8fffff]pci 0000:01:05.0: reg 30: [mem 0xfa8c0000-0xfa8dffff pref]pci 0000:01:05.0: supports D1 D2pci 0000:00:01.0: PCI bridge to [bus 01-01]pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]pci 0000:00:01.0: bridge window [mem 0xfa800000-0xfa8fffff]pci 0000:00:01.0: bridge window [mem 0xb7f00000-0xbfefffff pref]pci 0000:02:00.0: reg 10: [mem 0xfa9f0000-0xfa9fffff 64bit]pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'pci 0000:00:04.0: PCI bridge to [bus 02-02]pci 0000:00:04.0: bridge window [mem 0xfa900000-0xfa9fffff]pci 0000:00:05.0: PCI bridge to [bus 03-05]pci 0000:00:05.0: bridge window [io 0x9000-0xafff]pci 0000:00:05.0: bridge window [mem 0xfaa00000-0xfe9fffff]pci 0000:00:05.0: bridge window [mem 0xbff00000-0xdfefffff 64bit pref]pci 0000:00:06.0: PCI bridge to [bus 06-06]pci 0000:00:07.0: PCI bridge to [bus 07-07]pci 0000:08:07.0: reg 10: [io 0xb800-0xb8ff]pci 0000:08:07.0: reg 14: [mem 0xfeaffc00-0xfeaffcff]pci 0000:08:07.0: supports D1 D2pci 0000:08:07.0: PME# supported from D1 D2 D3hot D3coldpci 0000:08:07.0: PME# disabledpci 0000:00:14.4: PCI bridge to [bus 08-08] (subtractive decode)pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]pci 0000:00:14.4: bridge window [mem 0xfea00000-0xfeafffff]pci_bus 0000:00: on NUMA node 0ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *11 12)ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 12)ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 12)ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 12) *10ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 12)ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 12) *0, disabled.ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 12)ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 12) *0, disabled.vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=nonevgaarb: loadedPCI: Using ACPI for IRQ routingPCI: pci_cache_line_size set to 64 bytesNetLabel: InitializingNetLabel: domain hash size = 128NetLabel: protocols = UNLABELED CIPSOv4NetLabel: unlabeled traffic allowed by defaultSwitching to clocksource tscpnp: PnP ACPI initACPI: bus type pnp registeredpnp: PnP ACPI: found 12 devicesACPI: ACPI bus type pnp unregisteredPnPBIOS: Disabledsystem 00:05: [io 0x04d0-0x04d1] has been reservedsystem 00:05: [io 0x040b] has been reservedsystem 00:05: [io 0x04d6] has been reservedsystem 00:05: [io 0x0c00-0x0c01] has been reservedsystem 00:05: [io 0x0c14] has been reservedsystem 00:05: [io 0x0c50-0x0c51] has been reservedsystem 00:05: [io 0x0c52] has been reservedsystem 00:05: [io 0x0c6c] has been reservedsystem 00:05: [io 0x0c6f] has been reservedsystem 00:05: [io 0x0cd0-0x0cd1] has been reservedsystem 00:05: [io 0x0cd2-0x0cd3] has been reservedsystem 00:05: [io 0x0cd4-0x0cd5] has been reservedsystem 00:05: [io 0x0cd6-0x0cd7] has been reservedsystem 00:05: [io 0x0cd8-0x0cdf] has been reservedsystem 00:05: [io 0x0800-0x089f] has been reservedsystem 00:05: [io 0x0b00-0x0b1f] could not be reservedsystem 00:05: [io 0x0900-0x090f] has been reservedsystem 00:05: [io 0x0910-0x091f] has been reservedsystem 00:05: [io 0xfe00-0xfefe] has been reservedsystem 00:05: [io 0x4000-0x40fe] has been reservedsystem 00:05: [mem 0xfed20000-0xfed3ffff] has been reservedsystem 00:05: [mem 0xfed45000-0xfed89fff] has been reservedsystem 00:05: [mem 0xffb80000-0xffbfffff] has been reservedsystem 00:05: [mem 0xfff80000-0xffffffff] has been reservedsystem 00:08: [mem 0xfec00000-0xfec00fff] could not be reservedsystem 00:08: [mem 0xfee00000-0xfee00fff] has been reservedsystem 00:09: [io 0x025c] has been reservedsystem 00:09: [io 0x025d] has been reservedsystem 00:09: [io 0x025e] has been reservedsystem 00:09: [io 0x025f] has been reservedsystem 00:0a: [mem 0xe0000000-0xefffffff] has been reservedsystem 00:0b: [mem 0x00000000-0x0009ffff] could not be reservedsystem 00:0b: [mem 0x000c0000-0x000cffff] could not be reservedsystem 00:0b: [mem 0x000e0000-0x000fffff] could not be reservedsystem 00:0b: [mem 0x00100000-0x6fffffff] could not be reservedpci 0000:00:01.0: PCI bridge to [bus 01-01]pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]pci 0000:00:01.0: bridge window [mem 0xfa800000-0xfa8fffff]pci 0000:00:01.0: bridge window [mem 0xb7f00000-0xbfefffff pref]pci 0000:00:04.0: PCI bridge to [bus 02-02]pci 0000:00:04.0: bridge window [io disabled]pci 0000:00:04.0: bridge window [mem 0xfa900000-0xfa9fffff]pci 0000:00:04.0: bridge window [mem pref disabled]pci 0000:00:05.0: PCI bridge to [bus 03-05]pci 0000:00:05.0: bridge window [io 0x9000-0xafff]pci 0000:00:05.0: bridge window [mem 0xfaa00000-0xfe9fffff]pci 0000:00:05.0: bridge window [mem 0xbff00000-0xdfefffff 64bit pref]pci 0000:00:06.0: PCI bridge to [bus 06-06]pci 0000:00:06.0: bridge window [io disabled]pci 0000:00:06.0: bridge window [mem disabled]pci 0000:00:06.0: bridge window [mem pref disabled]pci 0000:00:07.0: PCI bridge to [bus 07-07]pci 0000:00:07.0: bridge window [io disabled]pci 0000:00:07.0: bridge window [mem disabled]pci 0000:00:07.0: bridge window [mem pref disabled]pci 0000:00:14.4: PCI bridge to [bus 08-08]pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]pci 0000:00:14.4: bridge window [mem 0xfea00000-0xfeafffff]pci 0000:00:14.4: bridge window [mem pref disabled]pci 0000:00:04.0: setting latency timer to 64pci 0000:00:05.0: setting latency timer to 64pci 0000:00:06.0: setting latency timer to 64pci 0000:00:07.0: setting latency timer to 64pci_bus 0000:00: resource 0 [io 0x0000-0xffff]pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]pci_bus 0000:01: resource 0 [io 0x8000-0x8fff]pci_bus 0000:01: resource 1 [mem 0xfa800000-0xfa8fffff]pci_bus 0000:01: resource 2 [mem 0xb7f00000-0xbfefffff pref]pci_bus 0000:02: resource 1 [mem 0xfa900000-0xfa9fffff]pci_bus 0000:03: resource 0 [io 0x9000-0xafff]pci_bus 0000:03: resource 1 [mem 0xfaa00000-0xfe9fffff]pci_bus 0000:03: resource 2 [mem 0xbff00000-0xdfefffff 64bit pref]pci_bus 0000:08: resource 0 [io 0xb000-0xbfff]pci_bus 0000:08: resource 1 [mem 0xfea00000-0xfeafffff]pci_bus 0000:08: resource 3 [io 0x0000-0xffff]pci_bus 0000:08: resource 4 [mem 0x00000000-0xffffffff]NET: Registered protocol family 2IP route cache hash table entries: 32768 (order: 5, 131072 bytes)TCP established hash table entries: 131072 (order: 8, 1048576 bytes)TCP bind hash table entries: 65536 (order: 7, 524288 bytes)TCP: Hash tables configured (established 131072 bind 65536)TCP reno registeredUDP hash table entries: 512 (order: 2, 16384 bytes)UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)NET: Registered protocol family 1pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabledpci 0000:01:05.0: Boot video devicePCI: CLS 64 bytes, default 64Trying to unpack rootfs image as initramfs...Freeing initrd memory: 5259k freedSimple Boot Flag at 0xff set to 0x1apm: BIOS not found.audit: initializing netlink socket (disabled)type=2000 audit(1284169662.636:1): initializedhighmem bounce pool size: 64 pagesHugeTLB registered 4 MB page size, pre-allocated 0 pagesVFS: Disk quotas dquot_6.5.2Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)msgmni has been set to 1724alg: No test for stdrng (krng)Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)io scheduler noop registeredio scheduler deadline registeredio scheduler cfq registered (default)pcieport 0000:00:04.0: setting latency timer to 64pcieport 0000:00:04.0: irq 24 for MSI/MSI-Xpcieport 0000:00:05.0: setting latency timer to 64pcieport 0000:00:05.0: irq 25 for MSI/MSI-Xpcieport 0000:00:06.0: setting latency timer to 64pcieport 0000:00:06.0: irq 26 for MSI/MSI-Xpcieport 0000:00:07.0: setting latency timer to 64pcieport 0000:00:07.0: irq 27 for MSI/MSI-Xvesafb: framebuffer at 0xb8000000, mapped to 0xf7c80000, using 1875k, total 16384kvesafb: mode is 800x600x16, linelength=1600, pages=16vesafb: protected mode interface info at c000:516evesafb: pmi: set display start = c00c51dc, set palette = c00c5216vesafb: pmi: ports = 8810 8816 8854 8838 883c 885c 8800 8804 88b0 88b2 88b4 vesafb: scrolling: redrawvesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0Console: switching to colour frame buffer device 100x37fb0: VESA VGA frame buffer deviceisapnp: Scanning for PnP cards...Linux agpgart interface v0.103Serial: 8250/16550 driver, 4 ports, IRQ sharing enabledbrd: module loadedPNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12i8042.c: Detected active multiplexing controller, rev 1.1.serio: i8042 KBD port at 0x60,0x64 irq 1serio: i8042 AUX0 port at 0x60,0x64 irq 12serio: i8042 AUX1 port at 0x60,0x64 irq 12serio: i8042 AUX2 port at 0x60,0x64 irq 12serio: i8042 AUX3 port at 0x60,0x64 irq 12mice: PS/2 mouse device common for all micertc_cmos 00:02: RTC can wake from S4rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0rtc0: alarms up to one month, y3k, 114 bytes nvramcpuidle: using governor laddercpuidle: using governor menuTCP cubic registeredUsing IPI No-Shortcut modePM: Checking image partition LABEL=MDVSWaPinput: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0isapnp: No Plug & Play device foundPM: Resume from disk failed.registered taskstats version 1 Magic number: 10:183:761rtc_cmos 00:02: setting system clock to 2010-09-11 01:47:43 UTC (1284169663)BIOS EDD facility v0.16 2004-Jun-25, 1 devices foundFreeing unused kernel memory: 520k freedSynaptics Touchpad, model: 1, fw: 6.2, id: 0x3aa0b4, caps: 0xa04713/0x200000input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1usbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbusbcore: registered new interface driver hiddevusbcore: registered new interface driver usbhidusbhid: USB HID core driverehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driverehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19ehci_hcd 0000:00:13.5: EHCI Host Controllerehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaroundehci_hcd 0000:00:13.5: debug port 1ehci_hcd 0000:00:13.5: irq 19, io mem 0xfebff800ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00usb usb1: New USB device found, idVendor=1d6b, idProduct=0002usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb1: Product: EHCI Host Controllerusb usb1: Manufacturer: Linux 2.6.33.7-desktop-1mnb ehci_hcdusb usb1: SerialNumber: 0000:00:13.5hub 1-0:1.0: USB hub foundhub 1-0:1.0: 10 ports detectedohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driverohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16ohci_hcd 0000:00:13.0: OHCI Host Controllerohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2ohci_hcd 0000:00:13.0: irq 16, io mem 0xfebfe000usb usb2: New USB device found, idVendor=1d6b, idProduct=0001usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb2: Product: OHCI Host Controllerusb usb2: Manufacturer: Linux 2.6.33.7-desktop-1mnb ohci_hcdusb usb2: SerialNumber: 0000:00:13.0hub 2-0:1.0: USB hub foundhub 2-0:1.0: 2 ports detectedohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17ohci_hcd 0000:00:13.1: OHCI Host Controllerohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3ohci_hcd 0000:00:13.1: irq 17, io mem 0xfebfd000usb usb3: New USB device found, idVendor=1d6b, idProduct=0001usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb3: Product: OHCI Host Controllerusb usb3: Manufacturer: Linux 2.6.33.7-desktop-1mnb ohci_hcdusb usb3: SerialNumber: 0000:00:13.1hub 3-0:1.0: USB hub foundhub 3-0:1.0: 2 ports detectedohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18ohci_hcd 0000:00:13.2: OHCI Host Controllerohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4ohci_hcd 0000:00:13.2: irq 18, io mem 0xfebfc000usb usb4: New USB device found, idVendor=1d6b, idProduct=0001usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb4: Product: OHCI Host Controllerusb usb4: Manufacturer: Linux 2.6.33.7-desktop-1mnb ohci_hcdusb usb4: SerialNumber: 0000:00:13.2hub 4-0:1.0: USB hub foundhub 4-0:1.0: 2 ports detectedohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17ohci_hcd 0000:00:13.3: OHCI Host Controllerohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5ohci_hcd 0000:00:13.3: irq 17, io mem 0xfebfb000usb usb5: New USB device found, idVendor=1d6b, idProduct=0001usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb5: Product: OHCI Host Controllerusb usb5: Manufacturer: Linux 2.6.33.7-desktop-1mnb ohci_hcdusb usb5: SerialNumber: 0000:00:13.3hub 5-0:1.0: USB hub foundhub 5-0:1.0: 2 ports detectedohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18ohci_hcd 0000:00:13.4: OHCI Host Controllerohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6ohci_hcd 0000:00:13.4: irq 18, io mem 0xfebfa000usb usb6: New USB device found, idVendor=1d6b, idProduct=0001usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb6: Product: OHCI Host Controllerusb usb6: Manufacturer: Linux 2.6.33.7-desktop-1mnb ohci_hcdusb usb6: SerialNumber: 0000:00:13.4hub 6-0:1.0: USB hub foundhub 6-0:1.0: 2 ports detecteduhci_hcd: USB Universal Host Controller Interface driverusb 1-1: new high speed USB device using ehci_hcd and address 2SCSI subsystem initializedlibata version 3.00 loaded.ahci 0000:00:12.0: version 3.0ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bitahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA modeahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc scsi0 : ahciscsi1 : ahciscsi2 : ahciscsi3 : ahciata1: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 22ata2: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd80 irq 22ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe00 irq 22ata4: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe80 irq 22usb 1-1: New USB device found, idVendor=1a40, idProduct=0101usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0usb 1-1: Product: USB 2.0 Hubhub 1-1:1.0: USB hub foundhub 1-1:1.0: 4 ports detectedusb 1-5: new high speed USB device using ehci_hcd and address 3usb 1-5: New USB device found, idVendor=18b4, idProduct=1001usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0input: HID 18b4:1001 as /devices/pci0000:00/0000:00:13.5/usb1/1-5/1-5:1.0/input/input2generic-usb 0003:18B4:1001.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 18b4:1001] on usb-0000:00:13.5-5/input0ata2: SATA link down (SStatus 0 SControl 300)ata4: SATA link down (SStatus 0 SControl 300)ata3: SATA link down (SStatus 0 SControl 300)usb 1-9: new high speed USB device using ehci_hcd and address 5ata1: softreset failed (device not ready)ata1: applying SB600 PMP SRST workaround and retryingusb 1-9: New USB device found, idVendor=0402, idProduct=5602usb 1-9: New USB device strings: Mfr=0, Product=1, SerialNumber=0usb 1-9: Product: USB2.0 Cameraata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)ata1.00: ATA-8: WDC WD3200BJKT-00F4T0, 11.01A11, max UDMA/133ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AAata1.00: SB600 AHCI: limiting to 255 sectors per cmdata1.00: SB600 AHCI: limiting to 255 sectors per cmdata1.00: configured for UDMA/133scsi 0:0:0:0: Direct-Access ATA WDC WD3200BJKT-0 11.0 PQ: 0 ANSI: 5sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >sd 0:0:0:0: [sda] Attached SCSI diskpata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16pata_atiixp 0000:00:14.1: setting latency timer to 64scsi4 : pata_atiixpscsi5 : pata_atiixpata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15usb 4-2: new full speed USB device using ohci_hcd and address 2ata5.01: ATAPI: Optiarc DVD RW AD-5540A, 2.63, max UDMA/33ata5.01: configured for UDMA/33scsi 4:0:1:0: CD-ROM Optiarc DVD RW AD-5540A 2.63 PQ: 0 ANSI: 5usb 4-2: New USB device found, idVendor=05d8, idProduct=4009usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0usb 4-2: Product: USB Scannerusb 1-1.1: new high speed USB device using ehci_hcd and address 6usb 1-1.1: New USB device found, idVendor=1a40, idProduct=0101usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0usb 1-1.1: Product: USB 2.0 Hubhub 1-1.1:1.0: USB hub foundhub 1-1.1:1.0: 4 ports detectedusb 1-1.3: new low speed USB device using ehci_hcd and address 7usb 1-1.3: New USB device found, idVendor=045e, idProduct=0047usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0usb 1-1.3: Product: Microsoft 5-Button Mouse with IntelliEye(TM)usb 1-1.3: Manufacturer: Microsoftinput: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.5/usb1/1-1/1-1.3/1-1.3:1.0/input/input3generic-usb 0003:045E:0047.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.5-1.3/input0usb 1-1.4: new low speed USB device using ehci_hcd and address 8usb 1-1.4: New USB device found, idVendor=13ba, idProduct=0017usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0usb 1-1.4: Product: Generic USB K/Binput: Generic USB K/B as /devices/pci0000:00/0000:00:13.5/usb1/1-1/1-1.4/1-1.4:1.0/input/input4generic-usb 0003:13BA:0017.0003: input,hidraw2: USB HID v1.10 Keyboard [Generic USB K/B] on usb-0000:00:13.5-1.4/input0input: Generic USB K/B as /devices/pci0000:00/0000:00:13.5/usb1/1-1/1-1.4/1-1.4:1.1/input/input5generic-usb 0003:13BA:0017.0004: input,hidraw3: USB HID v1.10 Mouse [Generic USB K/B] on usb-0000:00:13.5-1.4/input1PM: Marking nosave pages: 000000000009f000 - 0000000000100000PM: Basic memory bitmaps createdPM: Basic memory bitmaps freedEXT4-fs (sda5): mounted filesystem with ordered data modeTomoyo security MAC extension available but disabled by default. If you want toenable and use it, ccs-tools package must be installed.udev: starting version 153ACPI: SSDT 6ffbe2a0 00D1C (v01 AMI CPU1PM 00000001 INTL 20051117)Marking TSC unstable due to TSC halts in idleACPI: SSDT 6ffbefc0 00D1C (v01 AMI CPU2PM 00000001 INTL 20051117)Switching to clocksource acpi_pmasus_laptop: Asus Laptop Support version 0.42asus_laptop: BSTS called, 0x7f returnedasus_laptop: T12Rv-V model detectedthermal LNXTHERM:01: registered as thermal_zone0ACPI: Thermal Zone [THRM] (55 C)input: Asus Laptop extra buttons as /devices/virtual/input/input6asus_laptop: Brightness ignored, must be controlled by ACPI video driverinput: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7ACPI: Lid Switch [LID]input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8ACPI: Power Button [PWRB]input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input9ACPI: Sleep Button [SLPB]input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input10ACPI: Power Button [PWRF]ACPI: Battery Slot [BAT0] (battery absent)ACPI: AC Adapter [AC0] (on-line)acpi device:02: registered as cooling_device2input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input11ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)Non-volatile memory driver v1.3device-mapper: uevent: version 1.0.3device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.comEXT4-fs (sda7): mounted filesystem with ordered data modeAdding 4188120k swap on /dev/sda6. Priority:-1 extents:1 across:4188120k pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17[drm] Initialized drm 1.1.0 20060810[drm] radeon defaulting to userspace modesetting.[drm] Initialized radeon 1.32.0 20080528 for 0000:01:05.0 on minor 0[drm] Setting GART location based on new memory map[drm] Loading R300 Microcodeplatform radeon_cp.0: firmware: requesting radeon/R300_cp.bin[drm] Num pipes: 4[drm] writeback test succeeded in 1 usecspci_hotplug: PCI Hot Plug PCI Core version: 0.5sd 0:0:0:0: Attached scsi generic sg0 type 0scsi 4:0:1:0: Attached scsi generic sg1 type 5sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda trayUniform CD-ROM driver Revision: 3.20sr 4:0:1:0: Attached scsi CD-ROM sr0cfg80211: Calling CRDA to update world regulatory domainshpchp: Standard Hot Plug PCI Controller Driver version: 0.4ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16ath5k 0000:02:00.0: setting latency timer to 64ath5k 0000:02:00.0: registered as 'phy0'Linux video capture interface: v2.00gspca: main v2.8.0 registeredACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SMB0 [0xb00-0xb0f]ACPI: If an ACPI driver is available for this device, you should use it instead of the native drivergspca: probing 0402:5602ALi m5602: Probing for a po1030 sensorALi m5602: Probing for a mt9m111 sensorcfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)ALi m5602: Probing for a s5k4aa sensorALi m5602: Probing for an ov9650 sensorALi m5602: Sensor reported 0xffffALi m5602: Probing for a s5k83a sensorALi m5602: Detected a s5k83a sensorgspca: video0 createdusbcore: registered new interface driver ALi m5602ALi m5602: registereddvb-usb: found a 'E3C EC168 DVB-T USB2.0 reference design' in warm state.dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.DVB: registering new adapter (E3C EC168 DVB-T USB2.0 reference design)ath: EEPROM regdomain: 0x60ath: EEPROM indicates we should expect a direct regpair mapath: Country alpha2 being used: 00ath: Regpair used: 0x608139too Fast Ethernet driver 0.9.288139too 0000:08:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20eth0: RealTek RTL8139 at 0xf84d6c00, 00:1b:fc:d7:f8:0d, IRQ 208139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)DVB: registering adapter 0 frontend 0 (E3C EC100 DVB-T)...phy0: Selected rate control algorithm 'minstrel'ath5k phy0: Atheros AR5414 chip found (MAC: 0xa0, PHY: 0x61)MXL5005S: Attached at address 0xc6dvb-usb: E3C EC168 DVB-T USB2.0 reference design successfully initialized and connected.usbcore: registered new interface driver dvb_usb_ec168HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16hda_codec: ALC660-VD: BIOS auto-probing.autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) mono: mono_out=0x0 inputs: mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1drealtek: Enable default setup for auto mode as fallbackinput: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input12NET: Registered protocol family 10lo: Disabled Privacy Extensionscfg80211: Calling CRDA for country: FRcfg80211: Regulatory domain changed to country: FR (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1ADDRCONF(NETDEV_UP): wlan0: link is not readyNET: Registered protocol family 17CPUFREQ: Per core ondemand sysfs interface is deprecated - up_thresholdfuse init (API version 7.13)