rendered paste body[root@asterisk asterisk]# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 47)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 02)
00:07.3 Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10)
00:08.0 VGA compatible controller: Alliance Semiconductor Corporation ProVideo 6424
00:09.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
[root@asterisk asterisk]# cat /proc/interrupts
CPU0
0: 3452631 XT-PIC timer
1: 102 XT-PIC i8042
2: 0 XT-PIC cascade
7: 0 XT-PIC parport0
8: 1 XT-PIC rtc
9: 1 XT-PIC acpi
10: 13455851 XT-PIC wctdm
11: 0 XT-PIC uhci_hcd:usb1
12: 31512 XT-PIC eth0
14: 10518 XT-PIC ide0
NMI: 0
ERR: 0
[root@asterisk asterisk]# lsmod
Module Size Used by
wcusb 20224 0
wctdm 43840 0
wcfxo 13600 0
wctdm24xxp 89924 0
wcte11xp 27424 0
wct1xxp 18720 0
wct4xxp 305472 0
tor2 94112 0
zaptel 204932 8 wcusb,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wct4xxp,tor2
ipv6 243937 12
autofs4 21701 1
hidp 16833 2
l2cap 23873 5 hidp
bluetooth 47909 2 hidp,l2cap
sunrpc 157309 1
ip_conntrack_netbios_ns 3265 0
xt_state 2497 2
xt_tcpudp 3393 12
iptable_filter 3265 1
iptable_mangle 3137 0
iptable_nat 7877 0
ip_nat 18541 1 iptable_nat
ip_conntrack 52597 4 ip_conntrack_netbios_ns,xt_state,iptable_nat,ip_nat
nfnetlink 7257 2 ip_nat,ip_conntrack
ip_tables 12809 3 iptable_filter,iptable_mangle,iptable_nat
x_tables 14917 4 xt_state,xt_tcpudp,iptable_nat,ip_tables
acpi_cpufreq 7369 0
freq_table 5573 1 acpi_cpufreq
video 16709 0
button 6993 0
battery 10053 0
ac 5189 0
lp 12937 0
parport_pc 27237 1
parport 37129 2 lp,parport_pc
uhci_hcd 23757 0
floppy 58437 0
serio_raw 7621 0
i2c_via 4805 0
i2c_algo_bit 8905 1 i2c_via
i2c_core 22209 1 i2c_algo_bit
8139too 27073 0
8139cp 22977 0
crc_ccitt 2369 1 zaptel
mii 5697 2 8139too,8139cp
dm_snapshot 18285 0
dm_zero 2241 0
dm_mirror 22673 0
dm_mod 59225 6 dm_snapshot,dm_zero,dm_mirror
ext3 129353 2
jbd 57813 1 ext3
[root@asterisk asterisk]# /sbin/ztcfg -vvv
Zaptel Configuration
======================
Channel map:
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
1 channels configured.
[root@asterisk asterisk]# asterisk -r
Asterisk 1.2.12.1, Copyright (C) 1999 - 2006 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'show license' for details.
=========================================================================
Connected to Asterisk 1.2.12.1 currently running on asterisk (pid = 5217)
Verbosity is at least 3
asterisk*CLI> reload chan_zap.so
-- Reloading module 'chan_zap.so' (Zapata Telephony w/PRI)
== Parsing '/etc/asterisk/zapata.conf': Found
Oct 6 23:26:38 WARNING[6316]: chan_zap.c:10874 setup_zap: Ignoring signalling
Oct 6 23:26:38 ERROR[6316]: chan_zap.c:10305 setup_zap: Unable to reconfigure channel '4'
Oct 6 23:26:38 WARNING[6316]: chan_zap.c:11067 reload: Reload of chan_zap.so is unsuccessful!
asterisk*CLI>
zaptel.conf
fxsks=4
loadzone = cl
defaultzone=cl
zapata.conf
[root@asterisk asterisk]# cat zapata.conf
[trunkgroups]
[channels]
usecallerid=yes
hidecallerid=no
callwaiting=no
usecallingpres=yes
threewaycalling=yes
transfer=yes
echocancel=yes
echotraining=yes
context=incoming
signalling=fxs_ks
channel => 4