rendered paste bodyivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (rc3j) loading
ivtv: Linux version: 2.6.12-gentoo-r4 SMP preempt PENTIUM4 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: User specified WinTV PVR 150 card
ivtv: Found an iTVC15 based chip
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: VIA PCI device: 0x3099 vendor: 0x1106
tveeprom: Hauppauge: model = 48011, rev = G510, serial# = 2669773
tveeprom: tuner = Philips FI1236 MK2 (idx = 10, type = 2)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3435 (type = 10)
ivtv: i2c attach [client=tveeprom,ok]
ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model 0x009d5450, Revision 0x00000004
ivtv: NTSC tuner detected
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: Unknown symbol crypto_alloc_tfm
cx25840: Unknown symbol crypto_free_tfm
ivtv: Failed to load module cx25840
wm8775: Ignoring new-style parameters in presence of obsolete ones
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Setting Tuner 2
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv i2c driver #0
ivtv: i2c client addr: 0x44 not found!
ivtv: Switching standard to NTSC.
ivtv: i2c client addr: 0x44 not found!
ivtv: Initialized WinTV PVR 150, card #0
ivtv: User specified WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: VIA PCI device: 0x3099 vendor: 0x1106
ivtv: ivtv_enc_thread: pid = 4705, itv = 0xd0919320
tveeprom: Encountered bad packet header [04]. Corrupt or not a Hauppauge eeprom.
ivtv: i2c attach [client=tveeprom,ok]
ivtv: Tuner Type 4, Tuner formats 0x00000000, Radio: no, Model 0x00000000, Revision 0x00000000
ivtv: Radio not detected
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115,ok]
saa7115: status: (1E) 0x00, (1F) 0xc0
saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115,ok]
saa7115: status: (1E) 0x00, (1F) 0x40
saa7127: Ignoring new-style parameters in presence of obsolete ones
saa7127: video encoder driver version V 0.3 loaded
msp34xx: ivtv version
msp34xx: init: chip=MSP3435G-B6, has NICAM support, simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Aug 2 2005 19:12:52
ivtv: i2c attach [client=MSP3435G-B6,ok]
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 9 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 1
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 33
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 225
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 25
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 65
ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 5 minor 17
ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 229
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 7 minor 233
ivtv: Create DMA stream 8
ivtv: Registered v4l2 device, streamtype 8 minor 49
ivtv: Setting Tuner 2
ivtv: i2c client id: 0x02 not found!
ivtv: Could not detect tuner standard, defaulting to NTSC.
ivtv: i2c client id: 0x02 not found!
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x40 not found!
ivtv: Switching standard to NTSC.
ivtv: i2c client id: 0x02 not found!
ivtv: i2c client addr: 0x40 not found!
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
ivtv: i2c client addr: 0x44 not found!
ivtv: ivtv_enc_thread: pid = 4780, itv = 0xd092d678
ivtv: ivtv_dec_thread: pid = 4781, itv = 0xd092d678
ivtv: Initialized WinTV PVR 350, card #1
ivtv: User specified WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: VIA PCI device: 0x3099 vendor: 0x1106
tveeprom: Encountered bad packet header [04]. Corrupt or not a Hauppauge eeprom.
ivtv: i2c attach [client=tveeprom,ok]
saa7115: starting probe for adapter ivtv i2c driver #2 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115,ok]
saa7115: status: (1E) 0x00, (1F) 0xc0
ivtv: Tuner Type 4, Tuner formats 0x00000000, Radio: no, Model 0x00000000, Revision 0x00000000
ivtv: Radio not detected
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 9 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 2
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 34
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 226
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 26
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 66
ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 5 minor 18
ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 230
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 7 minor 234
ivtv: Create DMA stream 8
ivtv: Registered v4l2 device, streamtype 8 minor 50
ivtv: Setting Tuner 2
ivtv: i2c client id: 0x02 not found!
ivtv: Could not detect tuner standard, defaulting to NTSC.
ivtv: i2c client id: 0x02 not found!
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x40 not found!
ivtv: Switching standard to NTSC.
ivtv: i2c client id: 0x02 not found!
ivtv: i2c client addr: 0x40 not found!
saa7115: decoder set norm NTSC
ivtv: ivtv_enc_thread: pid = 4828, itv = 0xd09419d0
ivtv: ivtv_dec_thread: pid = 4829, itv = 0xd09419d0
saa7115: set audio: 0x01
ivtv: i2c client addr: 0x44 not found!
ivtv: Initialized WinTV PVR 350, card #2
ivtv: ==================== END INIT IVTV ====================
cdrom: open failed.
XFS mounting filesystem dm-0
Ending clean XFS mount for filesystem: dm-0
XFS mounting filesystem dm-1
Ending clean XFS mount for filesystem: dm-1
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=1 or dxs_support=4 option
and report if it works on your machine.
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:11.5 to 64
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
ivtv: i2c client addr: 0x44 not found!
ivtv: i2c client addr: 0x44 not found!
ivtv: i2c client addr: 0x44 not found!
ivtv: i2c client addr: 0x44 not found!
ivtv: i2c client addr: 0x44 not found!
ivtv: i2c client addr: 0x44 not found!
ivtv: i2c client addr: 0x44 not found!
ivtv: i2c client addr: 0x44 not found!
ivtv: i2c client addr: 0x44 not found!
ivtv: i2c client addr: 0x44 not found!
saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0
saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x40 not found!
saa7115: decoder disable output
ivtv: i2c client id: 0x02 not found!
ivtv: i2c client addr: 0x40 not found!
saa7115: decoder enable output
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x40 not found!
saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0
saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x40 not found!
saa7115: decoder disable output
ivtv: i2c client id: 0x02 not found!
ivtv: i2c client addr: 0x40 not found!
saa7115: decoder enable output
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x40 not found!
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set size
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x40 not found!
saa7115: decoder disable output
saa7115: decoder enable output