rendered paste bodyInitializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.34-ARCH (tobias@T-POWA-LX) (gcc version 4.5.0 20100610 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 5 21:03:38 UTC 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000037fd0000 (usable)
BIOS-e820: 0000000037fd0000 - 0000000037fde000 (ACPI data)
BIOS-e820: 0000000037fde000 - 0000000038000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x37fd0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 0000000037fd0000 (usable)
modified: 0000000037fd0000 - 0000000037fde000 (ACPI data)
modified: 0000000037fde000 - 0000000038000000 (ACPI NVS)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fee00000 - 00000000fef00000 (reserved)
modified: 00000000ff780000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
found SMP MP-table at [c00ff780] ff780
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 15000-1a000
RAMDISK: 37df1000 - 37fc0000
Allocated new RAMDISK: 00100000 - 002ce927
Move RAMDISK from 0000000037df1000 - 0000000037fbf926 to 00100000 - 002ce926
ACPI: RSDP 000f9590 00014 (v00 ACPIAM)
ACPI: RSDT 37fd0000 00034 (v01 A M I OEMRSDT 11000515 MSFT 00000097)
ACPI: FACP 37fd0200 00084 (v02 A M I OEMFACP 11000515 MSFT 00000097)
ACPI: DSDT 37fd0440 04A29 (v01 1ADBE 1ADBE007 00000007 INTL 02002026)
ACPI: FACS 37fde000 00040
ACPI: APIC 37fd0390 00070 (v01 A M I OEMAPIC 11000515 MSFT 00000097)
ACPI: MCFG 37fd0400 0003C (v01 A M I OEMMCFG 11000515 MSFT 00000097)
ACPI: OEMB 37fde040 00056 (v01 A M I AMI_OEM 11000515 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
7MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x00037fd0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x00037fd0
On node 0 totalpages: 229215
free_area_init_node: node 0, pgdat c1402fc0, node_mem_map c1563200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 16 pages used for memmap
HighMem zone: 1986 pages, LIFO batch:0
Using APIC driver default
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 24
early_res array is doubled to 64 at [16000 - 167ff]
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 38000000 (gap: 38000000:c6c00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c2000000 s34388 r0 d22956 u2097152
pcpu-alloc: s34388 r0 d22956 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227423
Kernel command line: root=/dev/disk/by-uuid/0ff41d6f-25d3-4d21-959e-aff7cc5803c9 ro
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 4586240 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Subtract (47 early reservations)
#1 [0000001000 - 0000002000] EX TRAMPOLINE
#2 [0001000000 - 000155ad84] TEXT DATA BSS
#3 [000155b000 - 0001561171] BRK
#4 [00000ff790 - 0000100000] BIOS reserved
#5 [00000ff780 - 00000ff790] MP-table mpf
#6 [000009fc00 - 00000fd540] BIOS reserved
#7 [00000fd668 - 00000ff780] BIOS reserved
#8 [00000fd540 - 00000fd668] MP-table mpc
#9 [0000010000 - 0000011000] TRAMPOLINE
#10 [0000011000 - 0000015000] ACPI WAKEUP
#11 [0000015000 - 0000016000] PGTABLE
#12 [0000100000 - 00002cf000] NEW RAMDISK
#13 [0001562000 - 0001563000] BOOTMEM
#14 [0001563000 - 0001c63000] BOOTMEM
#15 [000155adc0 - 000155adc4] BOOTMEM
#16 [000155ae00 - 000155aec0] BOOTMEM
#17 [000155aec0 - 000155af14] BOOTMEM
#18 [0001c63000 - 0001c66000] BOOTMEM
#19 [000155af40 - 000155af44] BOOTMEM
#20 [000155af80 - 000155afe0] BOOTMEM
#21 [0001561180 - 00015611a7] BOOTMEM
#22 [00015611c0 - 00015612d8] BOOTMEM
#23 [0001561300 - 0001561340] BOOTMEM
#24 [0001561340 - 0001561380] BOOTMEM
#25 [0001561380 - 00015613c0] BOOTMEM
#26 [00015613c0 - 0001561400] BOOTMEM
#27 [0001561400 - 0001561440] BOOTMEM
#28 [0001561440 - 0001561480] BOOTMEM
#29 [0001561480 - 00015614c0] BOOTMEM
#30 [00015614c0 - 0001561500] BOOTMEM
#31 [0001561500 - 0001561540] BOOTMEM
#32 [0001561540 - 0001561550] BOOTMEM
#33 [0001561580 - 00015615bf] BOOTMEM
#34 [00015615c0 - 00015615ff] BOOTMEM
#35 [0002000000 - 000200e000] BOOTMEM
#36 [0002200000 - 000220e000] BOOTMEM
#37 [0001561600 - 0001561604] BOOTMEM
#38 [0001561640 - 0001561644] BOOTMEM
#39 [0001561680 - 0001561688] BOOTMEM
#40 [00015616c0 - 00015616c8] BOOTMEM
#41 [0001561700 - 00015617a8] BOOTMEM
#42 [00015617c0 - 0001561828] BOOTMEM
#43 [0001c66000 - 0001c6a000] BOOTMEM
#44 [0001c6a000 - 0001cea000] BOOTMEM
#45 [0001cea000 - 0001d2a000] BOOTMEM
#46 [000220e000 - 000266db00] BOOTMEM
Initializing HighMem for node 0 (000377fe:00037fd0)
Memory: 896912k/917312k available (2930k kernel code, 19948k reserved, 1209k data, 408k init, 8008k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc140b000 - 0xc1471000 ( 408 kB)
.data : 0xc12dc8fc - 0xc140adc0 (1209 kB)
.text : 0xc1000000 - 0xc12dc8fc (2930 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2008.938 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4019.28 BogoMIPS (lpj=6696460)
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
mce: CPU supports 5 MCE banks
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20100121
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02
Brought up 1 CPUs
Total of 1 processors activated (4019.28 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
node 0 link 0: io port [5000, ffffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, fe0bffff]
bus: [00, ff] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x40000000-0xffffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI Warning: Incorrect checksum in table [OEMB] - 86, should be 82 (20100121/tbutils-314)
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xff77ffff] (ignored)
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:00:05.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:05.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
pci 0000:00:05.0: reg 30: [mem 0xfebe0000-0xfebfffff pref]
pci 0000:00:0a.1: reg 20: [io 0x5000-0x503f]
pci 0000:00:0a.1: reg 24: [io 0x6000-0x603f]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.1: PME# disabled
pci 0000:00:0b.0: reg 10: [mem 0xfebde000-0xfebdefff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0b.1: reg 10: [mem 0xfebdfc00-0xfebdfcff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: PME# disabled
pci 0000:00:0d.0: reg 20: [io 0xffa0-0xffaf]
pci 0000:00:0e.0: reg 10: [io 0xe800-0xe807]
pci 0000:00:0e.0: reg 14: [io 0xe480-0xe483]
pci 0000:00:0e.0: reg 18: [io 0xe400-0xe407]
pci 0000:00:0e.0: reg 1c: [io 0xe080-0xe083]
pci 0000:00:0e.0: reg 20: [io 0xe000-0xe00f]
pci 0000:00:0e.0: reg 24: [mem 0xfebdd000-0xfebddfff]
pci 0000:00:10.1: reg 10: [mem 0xfebd8000-0xfebdbfff]
pci 0000:00:10.1: PME# supported from D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:14.0: reg 10: [mem 0xfebdc000-0xfebdcfff]
pci 0000:00:14.0: reg 14: [io 0xdc00-0xdc07]
pci 0000:00:14.0: supports D1 D2
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: PME# disabled
PCI: peer root bus 00 res updated from pci conf
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:04.0: PCI bridge to [bus 03-03]
pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:10.0: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:10.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:10.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:10.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:10.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 0000000037fd0000 - 0000000037ffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:06: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x080f] has been reserved
system 00:07: [io 0x4000-0x407f] has been reserved
system 00:07: [io 0x4080-0x40ff] has been reserved
system 00:07: [io 0x4400-0x447f] has been reserved
system 00:07: [io 0x4480-0x44ff] has been reserved
system 00:07: [io 0x4800-0x487f] has been reserved
system 00:07: [io 0x4880-0x48ff] has been reserved
system 00:07: [io 0x2000-0x207f] has been reserved
system 00:07: [io 0x2080-0x20ff] has been reserved
system 00:07: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:07: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:07: [mem 0x000de000-0x000dffff window] has been reserved
system 00:07: [mem 0xfeb80000-0xfebbffff] has been reserved
system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [io 0x0a00-0x0a0f] has been reserved
system 00:0b: [io 0x0a10-0x0a1f] has been reserved
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0x3fffffff] could not be reserved
system 00:0d: [mem 0xff780000-0xffffffff] has been reserved
Switching to clocksource acpi_pm
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io disabled]
pci 0000:00:02.0: bridge window [mem disabled]
pci 0000:00:02.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [mem disabled]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:00:04.0: PCI bridge to [bus 03-03]
pci 0000:00:04.0: bridge window [io disabled]
pci 0000:00:04.0: bridge window [mem disabled]
pci 0000:00:04.0: bridge window [mem pref disabled]
pci 0000:00:10.0: PCI bridge to [bus 04-04]
pci 0000:00:10.0: bridge window [io disabled]
pci 0000:00:10.0: bridge window [mem disabled]
pci 0000:00:10.0: bridge window [mem pref disabled]
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:10.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x40000000-0xffffffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
pci_bus 0000:04: resource 5 [mem 0x40000000-0xffffffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:05.0: Boot video device
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1852k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1281215908.646:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1739
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 25 for MSI/MSI-X
pcieport 0000:00:04.0: setting latency timer to 64
pcieport 0000:00:04.0: irq 26 for MSI/MSI-X
pcieport 0000:00:02.0: Requesting control of PCIe PME from ACPI BIOS
pcieport 0000:00:02.0: Failed to receive control of PCIe PME service: no _OSC support
pcie_pme: probe of 0000:00:02.0:pcie01 failed with error -13
pcieport 0000:00:03.0: Requesting control of PCIe PME from ACPI BIOS
pcieport 0000:00:03.0: Failed to receive control of PCIe PME service: no _OSC support
pcie_pme: probe of 0000:00:03.0:pcie01 failed with error -13
pcieport 0000:00:04.0: Requesting control of PCIe PME from ACPI BIOS
pcieport 0000:00:04.0: Failed to receive control of PCIe PME service: no _OSC support
pcie_pme: probe of 0000:00:04.0:pcie01 failed with error -13
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 408k freed
udev: starting version 160
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 19
nouveau 0000:00:05.0: PCI INT A -> Link[LNEC] -> GSI 19 (level, low) -> IRQ 19
nouveau 0000:00:05.0: setting latency timer to 64
[drm] nouveau 0000:00:05.0: Detected an NV40 generation card (0x04e000a2)
[drm] nouveau 0000:00:05.0: Attempting to load BIOS image from PROM
[drm] nouveau 0000:00:05.0: ... BIOS signature not found
[drm] nouveau 0000:00:05.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:00:05.0: ... appears to be valid
[drm] nouveau 0000:00:05.0: BIT BIOS found
[drm] nouveau 0000:00:05.0: Bios version 05.51.22.31
[drm] nouveau 0000:00:05.0: BIT table 'd' not found
[drm] nouveau 0000:00:05.0: Found Display Configuration Block version 3.0
[drm] nouveau 0000:00:05.0: Raw DCB entry 0: 02000300 00000023
[drm] nouveau 0000:00:05.0: DCB connector table: VHER 0x30 5 10 2
[drm] nouveau 0000:00:05.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff
[drm] nouveau 0000:00:05.0: Parsing VBIOS init table 0 at offset 0xCE63
[drm] nouveau 0000:00:05.0: Parsing VBIOS init table 1 at offset 0xCFBA
[drm] nouveau 0000:00:05.0: Parsing VBIOS init table 2 at offset 0xCFBB
[drm] nouveau 0000:00:05.0: Parsing VBIOS init table 3 at offset 0xD127
[drm] nouveau 0000:00:05.0: Parsing VBIOS init table 4 at offset 0xD170
[drm] nouveau 0000:00:05.0: Detected 128MiB VRAM
[TTM] Zone kernel: Available graphics memory: 445582 kiB.
[TTM] Zone highmem: Available graphics memory: 449586 kiB.
[drm] nouveau 0000:00:05.0: 64 MiB GART (aperture)
[drm] nouveau 0000:00:05.0: Allocating FIFO number 0
[drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 0
[drm] nouveau 0000:00:05.0: Initial CRTC_OWNER is 0
[drm] nouveau 0000:00:05.0: Saving VGA fonts
[drm] nouveau 0000:00:05.0: Detected a VGA connector
[drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:00:05.0: Load detected on output B
[drm] nouveau 0000:00:05.0: allocated 1024x768 fb: 0x49000, bo f6880a00
[drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
Console: switching to colour frame buffer device 128x48
fb0: nouveaufb frame buffer device
registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:00:05.0 on minor 0
SCSI subsystem initialized
libata version 3.00 loaded.
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
sata_nv 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe000 irq 23
ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 23
pata_amd 0000:00:0d.0: version 0.4.1
pata_amd 0000:00:0d.0: setting latency timer to 64
scsi2 : pata_amd
scsi3 : pata_amd
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata3.00: ATA-6: WDC WD1600BB-22GUC0, 08.02D08, max UDMA/100
ata3.00: 312581808 sectors, multi 16: LBA48
ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc600c000) ACPI=0x3f01f (20:900:0x11)
ata3.00: limited to UDMA/33 due to 40-wire cable
ata3.00: configured for UDMA/33
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA WDC WD1600BB-22G 08.0 PQ: 0 ANSI: 5
ata4.00: ATAPI: TSSTcorpCD/DVDW TS-H552D, GA01, max UDMA/33
ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc600c000) ACPI=0x701f (60:900:0x11)
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552D GA01 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sda1
sd 2:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
udev: starting version 160
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
forcedeth 0000:00:14.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
lp: driver loaded but no devices found
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:16:17:11:46:c9
forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3
(null): Error requesting region 5000 .. 503F for SMB1
nForce2_smbus 0000:00:0a.1: Error probing SMB1.
i2c i2c-1: nForce2 SMBus adapter at 0x6000
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:0b.1: setting latency timer to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
ehci_hcd 0000:00:0b.1: irq 21, io mem 0xfebdfc00
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP]
psmouse serio1: ID: 10 00 64
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:0b.0: setting latency timer to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 20, io mem 0xfebde000
lp0: using parport0 (interrupt-driven).
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ppdev: user-space parallel port driver
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:10.1: setting latency timer to 64
usb 2-7: new full speed USB device using ohci_hcd and address 2
hda_codec: ALC880: BIOS auto-probing.
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-7:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input4
scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
sd 4:0:0:1: Attached scsi generic sg3 type 0
scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 4:0:0:2: Attached scsi generic sg4 type 0
scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 4:0:0:3: Attached scsi generic sg5 type 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:1: [sdc] Attached SCSI removable disk
sd 4:0:0:2: [sdd] Attached SCSI removable disk
sd 4:0:0:3: [sde] Attached SCSI removable disk
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
[drm] nouveau 0000:00:05.0: Load detected on output B
[drm] nouveau 0000:00:05.0: Load detected on output B
[drm] nouveau 0000:00:05.0: Allocating FIFO number 1
[drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 1
[drm] nouveau 0000:00:05.0: Allocating FIFO number 2
[drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 2
[drm] nouveau 0000:00:05.0: nouveau_channel_free: freeing fifo 2
[drm] nouveau 0000:00:05.0: nouveau_channel_free: freeing fifo 1
[drm] nouveau 0000:00:05.0: Load detected on output B
[drm] nouveau 0000:00:05.0: Load detected on output B
[drm] nouveau 0000:00:05.0: Allocating FIFO number 1
[drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 1
[drm] nouveau 0000:00:05.0: Allocating FIFO number 2
[drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 2
[drm] nouveau 0000:00:05.0: Load detected on output B
[drm] nouveau 0000:00:05.0: nouveau_channel_free: freeing fifo 2
[drm] nouveau 0000:00:05.0: nouveau_channel_free: freeing fifo 1
[drm] nouveau 0000:00:05.0: Load detected on output B
[drm] nouveau 0000:00:05.0: Load detected on output B
[drm] nouveau 0000:00:05.0: Allocating FIFO number 1
[drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 1
[drm] nouveau 0000:00:05.0: Allocating FIFO number 2
[drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 2
[drm] nouveau 0000:00:05.0: Load detected on output B
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[drm] nouveau 0000:00:05.0: Load detected on output B