E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. Reading package lists...Building dependency tree...Reading state information...Reading extended state information...Initializing package states...E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. Reading package lists...Building dependency tree...Reading state information...Reading extended state information...Initializing package states...E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. Reading package lists...Building dependency tree...Reading state information...Reading extended state information...Initializing package states...E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. --2010-07-03 22:18:35-- http://dl.dropbox.com/u/4325533/XCI/Temp-sensors/coretemp.patchResolving dl.dropbox.com... 75.101.142.97, 75.101.148.191, 174.129.33.139, ...Connecting to dl.dropbox.com|75.101.142.97|:80... connected.HTTP request sent, awaiting response... 200 OKLength: 3441 (3.4K) [text/x-diff]Saving to: `coretemp.patch' 0K ... 100% 14.9K=0.2s2010-07-03 22:18:36 (14.9 KB/s) - `coretemp.patch' saved [3441/3441]bzip2: Compressed file ends unexpectedly; perhaps it is corrupted? *Possible* reason follows.bzip2: Invalid argument Input file = (stdin), output file = (stdout)It is possible that the compressed file(s) have become corrupted.You can use the -tvv option to test integrity of such files.You can use the `bzip2recover' program to attempt to recoverdata from undamaged sections of corrupted files.tar: Child returned status 2tar: Exiting with failure status due to previous errorsmake: Entering directory `/usr/src/linux-headers-2.6.31-22-generic'scripts/Makefile.build:44: /usr/src/linux-source-2.6.31/drivers/hwmon/Makefile: No such file or directorymake[1]: *** No rule to make target `/usr/src/linux-source-2.6.31/drivers/hwmon/Makefile'. Stop.make: *** [_module_/usr/src/linux-source-2.6.31/drivers/hwmon] Error 2make: Leaving directory `/usr/src/linux-headers-2.6.31-22-generic'cp: cannot stat `/usr/src/linux-source-2.6.31/drivers/hwmon/coretemp.ko': No such file or directory--2010-07-03 22:18:38-- http://dl.dropbox.com/u/4325533/XCI/Temp-sensors/sensors-detectResolving dl.dropbox.com... 75.101.136.120, 75.101.142.97, 75.101.148.191, ...Connecting to dl.dropbox.com|75.101.136.120|:80... connected.HTTP request sent, awaiting response... 200 OKLength: 171252 (167K) [application/octet-stream]Saving to: `sensors-detect' 0K .......... .......... .......... .......... .......... 29% 55.6K 2s 50K .......... .......... .......... .......... .......... 59% 221K 1s 100K .......... .......... .......... .......... .......... 89% 224K 0s 150K .......... ....... 100% 11.2M=1.4s2010-07-03 22:18:40 (124 KB/s) - `sensors-detect' saved [171252/171252]--2010-07-03 22:18:40-- http://dl.dropbox.com/u/4325533/XCI/Temp-Sensors/sensors-inputResolving dl.dropbox.com... 75.101.129.115, 75.101.136.120, 75.101.142.97, ...Connecting to dl.dropbox.com|75.101.129.115|:80... connected.HTTP request sent, awaiting response... 200 OKLength: 21 [application/octet-stream]Saving to: `sensors-input' 0K 100% 417K=0s2010-07-03 22:18:41 (417 KB/s) - `sensors-input' saved [21/21]# sensors-detect revision 5842 (2010-06-19 21:47:45 +0200)# System: To Be Filled By O.E.M. To Be Filled By O.E.M.# Board: ASRock AMCP7A-IONThis program will help you determine which kernel modules you needto load to use lm_sensors most effectively. It is generally safeand recommended to accept the default answers to all questions,unless you know what you're doing.Some south bridges, CPUs or memory controllers contain embedded sensors.Do you want to scan for them? This is totally safe. (YES/no): Silicon Integrated Systems SIS5595... NoVIA VT82C686 Integrated Sensors... NoVIA VT8231 Integrated Sensors... NoAMD K8 thermal sensors... NoAMD Family 10h thermal sensors... NoAMD Family 11h thermal sensors... NoIntel Core family thermal sensor... NoIntel Atom thermal sensor... Success! (driver `coretemp')Intel AMB FB-DIMM thermal sensor... NoVIA C7 thermal sensor... NoVIA Nano thermal sensor... NoSome Super I/O chips contain embedded sensors. We have to write tostandard I/O ports to probe them. This is usually safe.Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2fTrying family `National Semiconductor'... NoTrying family `SMSC'... NoTrying family `VIA/Winbond/Nuvoton/Fintek'... NoTrying family `ITE'... NoProbing for Super-I/O at 0x4e/0x4fTrying family `National Semiconductor'... NoTrying family `SMSC'... NoTrying family `VIA/Winbond/Nuvoton/Fintek'... NoTrying family `ITE'... NoSome systems (mainly servers) implement IPMI, a set of common interfacesthrough which system health data may be retrieved, amongst other things.We first try to get the information from SMBIOS. If we don't find itthere, we have to read from arbitrary I/O ports to probe for suchinterfaces. This is normally safe. Do you want to scan for IPMIinterfaces? (YES/no): Probing for `IPMI BMC KCS' at 0xca0... NoProbing for `IPMI BMC SMIC' at 0xca8... NoSome hardware monitoring chips are accessible through the ISA I/O ports.We have to write to arbitrary I/O ports to probe them. This is usuallysafe though. Yes, you do have ISA I/O ports even if you do not have anyISA slots! Do you want to scan the ISA I/O ports? (YES/no): Probing for `National Semiconductor LM78' at 0x290... NoProbing for `National Semiconductor LM79' at 0x290... NoProbing for `Winbond W83781D' at 0x290... NoProbing for `Winbond W83782D' at 0x290... NoLastly, we can probe the I2C/SMBus adapters for connected hardwaremonitoring devices. This is the most risky part, and while it worksreasonably well on most systems, it has been reported to cause troubleon some systems.Do you want to probe the I2C/SMBus adapters now? (YES/no): Using driver `i2c-nforce2' for device 0000:00:03.2: nVidia Corporation nForce SMBus (MCP79)Module i2c-dev loaded successfully.Next adapter: SMBus nForce2 adapter at 4d00 (i2c-0)Do you want to scan it? (YES/no/selectively): Client found at address 0x50Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoProbing for `EDID EEPROM'... NoClient found at address 0x51Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoClient found at address 0x52Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoClient found at address 0x53Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoNext adapter: NVIDIA i2c adapter (i2c-1)Do you want to scan it? (YES/no/selectively): Next adapter: NVIDIA i2c adapter (i2c-2)Do you want to scan it? (YES/no/selectively): Next adapter: NVIDIA i2c adapter (i2c-3)Do you want to scan it? (YES/no/selectively): Now follows a summary of the probes I have just done.Just press ENTER to continue: Driver `coretemp': * Chip `Intel Atom thermal sensor' (confidence: 9)Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensorsfor initialization at boot time.You should now start the lm_sensors service to load the requiredkernel modules.Unloading i2c-dev... OKlm-sensors: unrecognized service./xbmc-installer.sh: line 1316: sensors: command not foundE: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. Reading package lists...Building dependency tree...Reading state information...Reading extended state information...Initializing package states...E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. ./xbmc-installer.sh: line 1322: cvs: command not found./xbmc-installer.sh: line 1325: ./configure: No such file or directorymake: *** No targets specified and no makefile found. Stop.make: *** No rule to make target `install'. Stop.--2010-07-03 22:18:46-- http://dl.dropbox.com/u/4325533/XCI/Temp-sensors/hddtemp.inputResolving dl.dropbox.com... 174.129.242.127, 184.73.197.198, 184.73.197.205, ...Connecting to dl.dropbox.com|174.129.242.127|:80... connected.HTTP request sent, awaiting response... 200 OKLength: 283 [application/octet-stream]Saving to: `hddtemp.input' 0K 100% 14.1M=0s2010-07-03 22:18:47 (14.1 MB/s) - `hddtemp.input' saved [283/283]--2010-07-03 22:18:50-- http://dl.dropbox.com/u/4325533/XCI/Temp-sensors/advancedsettings-coretempResolving dl.dropbox.com... 174.129.212.16, 174.129.242.127, 184.73.197.198, ...Connecting to dl.dropbox.com|174.129.212.16|:80... connected.HTTP request sent, awaiting response... 200 OKLength: 434 [application/octet-stream]Saving to: `advancedsettings-coretemp' 0K 100% 22.4M=0s2010-07-03 22:18:51 (22.4 MB/s) - `advancedsettings-coretemp' saved [434/434]stop: Unknown instance: xbmc-live start/running, process 2109